Biocatalytic Conversion of Granular Starch to Industrial Chemicals

2007 ◽  
pp. 32-45 ◽  
Author(s):  
Manoj Kumar ◽  
Jeff Pucci ◽  
Jay Shetty ◽  
Gopal Chotani ◽  
Karl Sanford
Keyword(s):  
Industrial Chemicals ◽  
Granular Starch

Biological and Phytochemical Screening of Fumaria indica extract on Chemically Induced Hepatocellular Carcinoma with Reference to Biochemical Parameters

2019 ◽  
Vol 10 (02) ◽  
Author(s):  
Irfan Aziz ◽  
Birendra Shrivastava ◽  
Chandana Venkateswara Rao2 ◽  
Sadath Ali
Keyword(s):  
Free Radicals ◽  
Liver Disease ◽  
Liver Cancer ◽  
Early Stage ◽  
Food Additives ◽  
Ethanolic Extract ◽  
Hepatoprotective Activity ◽  
Control Group ◽  
Industrial Chemicals ◽  
Toxic Industrial Chemicals

Liver disease or liver cancer is the sixth most common cancer and the third leading cause of cancer mortality in the world. Hepatitis viral infection, food additives, alcohol, fungal toxins (aflatoxins), toxic industrial chemicals, air and water pollutants are the major risk factors of liver cancer. Moreover, due to high tolerance of liver, HCC is seldom detected at an early stage and once detected treatment faces a poor prognosis in most cases.Fumaria indica possesses hepatoprotective activity as evidenced by the significant and dose dependent restoring the activities of entire liver cancer marker enzymes, diminution in tumor incidence, decrease in lipid peroxidation (LPO) and increase in the level of antioxidant enzymes (GSH, CAT, SOD, GPx and GST) through scavenging of free radicals, or by enhancing the activity of antioxidant, which then detoxify free radicals. These factors protect cells from ROS damage in NDEA and CCl4-induced hepatocarcinogenesis. Histopathological observations of liver tissues too correlated with the biochemical observations. Thus, present investigation suggested that the Fumaria indica would exert a chemoprotective effect by reversing the oxidant-antioxidant imbalance during hepatocarcinogenesis induced by NDEA and CCl4. Besides Fumaria indicais very much effective in preventing NDEA-induced multistage hepatocarcinogenesis possibly through antioxidant and antigenotoxic nature, which was confirmed by various liver injury and biochemical tumour markers enzymes. The hepatoprotective activity of a Fumaria indicaof 50 % ethanolic extract was studied using rats. The animals received a single intraperitoneal injection of N-nitrosodiethylamine 200mg/kg body wt followed by subcutaneous injection of CCl4 in a dose of 3 ml/kg body wt. Fumaria indica extract dose dependently and significantly the increase in serum hepatic enzyme levels after NDEAand CCl4 treatment compared to the toxin control group. The results of this study confirmed the antioxidant and hepatoprotective activity of the Fumaria indicaextract against carbon tetrachlorideand N-nitrosodiethylamine induced hepatotoxicity in rats. In addition to this, studies on molecular aspect of hepatoprotective therapy will give mechanistic information in hepatoprotective therapy and also critical balance should be there between the animal model and clinical research. The hepatoprotective properties of Fumaria indicashould provide useful information in the possible application in hepatic liver disease.

Immunological mechanisms of chronic liver lesions under the influence of chemicals

2020 ◽  
pp. 536-537
Author(s):  
G. S. Agzamova ◽  
M. M. Abdullaeva
Keyword(s):  
The Body ◽  
Chronic Liver ◽  
Toxic Substances ◽  
Liver Lesions ◽  
Industrial Chemicals ◽  
Toxic Agent ◽  
Chronic Poisoning ◽  
Immunological Mechanisms ◽  
T System

The immunological profile of chronic liver lesions depending on the toxic agent was studied. It was revealed that chronic poisoning by industrial toxic substances causes changes in the functional state of the T-system of immunity, long-term contact with industrial chemicals leads to increased sensitization to autoantigens of the body.

Liver Disorders

2017 ◽  
Author(s):  
Barry S. Levy
Keyword(s):  
Occupational Exposure ◽  
Vinyl Chloride ◽  
Solid Waste Management ◽  
Dietary Exposure ◽  
Hepatitis E ◽  
Vinyl Chloride Monomer ◽  
Virus Infections ◽  
Industrial Chemicals ◽  
Liver Disorders ◽  
Increased Risk

This chapter describes occupational and environmental liver disorders. It describes the types of liver function and types of liver damage, and how these functions and this damage can be assessed. Workers in healthcare and solid waste management are at increased risk hepatitis B virus and hepatitis C virus infections. Occupational exposure to swine is associated with hepatitis E virus infection. More than 100 industrial chemicals can be acutely hepatotoxic in experimental animals or humans. Metabolic reactions may affect the hepatotoxicity of chemicals. Occupational exposure to organic solvents can cause toxic hepatitis. Occupational exposure to vinyl chloride monomer has been causally associated with toxicant-associated fatty liver disease as well as a form of non-cirrhotic portal hypertension. Several agents can cause cancer of the liver or bile ducts. Vinyl chloride monomer is causally associated with angiosacoma of the liver. Arsenic causes liver cancer. Dietary exposure to aflatoxins can cause hepatoceulluar carcinoma.

scholarly journals UV Stimulated Manganese Dioxide for the Persulfate Catalytic Degradation of Bisphenol A

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 502
Author(s):  
Guihua Dong ◽  
Bing Chen ◽  
Bo Liu ◽  
Stanislav R. Stoyanov ◽  
Yiqi Cao ◽  
...  
Keyword(s):  
Bisphenol A ◽  
Reaction Mechanisms ◽  
Reduction Rate ◽  
Catalytic Degradation ◽  
Gas Chromatography Mass Spectrometry ◽  
Degradation Pathways ◽  
Industrial Chemicals ◽  
Oh Groups ◽  
Long Term Adverse Effects

One of the most commonly produced industrial chemicals worldwide, bisphenol A (BPA), is used as a precursor in plastics, resins, paints, and many other materials. It has been proved that BPA can cause long-term adverse effects on ecosystems and human health due to its toxicity as an endocrine disruptor. In this study, we developed an integrated MnO2/UV/persulfate (PS) process for use in BPA photocatalytic degradation from water and examined the reaction mechanisms, degradation pathways, and toxicity reduction. Comparative tests using MnO2, PS, UV, UV/MnO2, MnO2/PS, and UV/PS processes were conducted under the same conditions to investigate the mechanism of BPA catalytic degradation by the proposed MnO2/UV/PS process. The best performance was observed in the MnO2/UV/PS process in which BPA was completely removed in 30 min with a reduction rate of over 90% for total organic carbon after 2 h. This process also showed a stable removal efficiency with a large variation of pH levels (3.6 to 10.0). Kinetic analysis suggested that 1O2 and SO4•− played more critical roles than •OH for BPA degradation. Infrared spectra showed that UV irradiation could stimulate the generation of –OH groups on the MnO2 photocatalyst surface, facilitating the PS catalytic degradation of BPA in this process. The degradation pathways were further proposed in five steps, and thirteen intermediates were identified by gas chromatography-mass spectrometry. The acute toxicity was analyzed during the treatment, showing a slight increase (by 3.3%) in the first 30 min and then a decrease by four-fold over 2 h. These findings help elucidate the mechanism and pathways of BPA degradation and provide an effective PS catalytic strategy.

scholarly journals A predictive in vitro risk assessment platform for pro-arrhythmic toxicity using human 3D cardiac microtissues

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Celinda M. Kofron ◽  
Tae Yun Kim ◽  
Fabiola Munarin ◽  
Arvin H. Soepriatna ◽  
Rajeev J. Kant ◽  
...  
Keyword(s):  
Risk Assessment ◽  
Action Potentials ◽  
Induced Pluripotent Stem Cell ◽  
Human Action ◽  
Environmental Toxicants ◽  
Pharmaceutical Drugs ◽  
Industrial Chemicals ◽  
Endocrine Disrupting Chemical

AbstractCardiotoxicity of pharmaceutical drugs, industrial chemicals, and environmental toxicants can be severe, even life threatening, which necessitates a thorough evaluation of the human response to chemical compounds. Predicting risks for arrhythmia and sudden cardiac death accurately is critical for defining safety profiles. Currently available approaches have limitations including a focus on single select ion channels, the use of non-human species in vitro and in vivo, and limited direct physiological translation. We have advanced the robustness and reproducibility of in vitro platforms for assessing pro-arrhythmic cardiotoxicity using human induced pluripotent stem cell-derived cardiomyocytes and human cardiac fibroblasts in 3-dimensional microtissues. Using automated algorithms and statistical analyses of eight comprehensive evaluation metrics of cardiac action potentials, we demonstrate that tissue-engineered human cardiac microtissues respond appropriately to physiological stimuli and effectively differentiate between high-risk and low-risk compounds exhibiting blockade of the hERG channel (E4031 and ranolazine, respectively). Further, we show that the environmental endocrine disrupting chemical bisphenol-A (BPA) causes acute and sensitive disruption of human action potentials in the nanomolar range. Thus, this novel human 3D in vitro pro-arrhythmic risk assessment platform addresses critical needs in cardiotoxicity testing for both environmental and pharmaceutical compounds and can be leveraged to establish safe human exposure levels.

2,4-Dichlorophenol and MCPA in a V79 Test

1988 ◽  
Vol 15 (3) ◽  
pp. 245-250
Author(s):  
Geirid Fiskesjö
Keyword(s):  
Chinese Hamster ◽  
Chinese Hamster Cell ◽  
Test System ◽  
Similar Degree ◽  
Human Beings ◽  
Industrial Chemicals ◽  
Allium Test ◽  
Chinese Hamster Cell Line ◽  
A Cell ◽  
Mutagenic Effects

Two industrial chemicals, 2,4-dichlorophenol and 4-chloro-2-methylphenoxyacetic acid (MCPA), which have no toxic effects on the Chinese hamster cell line V79 alone, were tested for toxicity and mutagenicity in a cell-mediated test, where mixed-function oxidase (MFO) enzymes are active in the metabolism of xenobiotics. For 2,4-dichlorophenol, a dose-dependent toxicity as well as a slight mutagenicity could be shown when oxygenation enzymes were present. A similar degree of toxicity in a plant test system (the Allium test) indicates a similar risk of damage from exposure to dichlorophenol treatments in both these systems. MCPA did not induce any toxic or mutagenic effects at the concentrations tested. These results were not in agreement with previous results in plant material, where MCPA was clearly toxic at relatively low doses. However, since chlorophenols have been found in plants sprayed with phenoxyacetic acids, further investigations should be performed concerning potential risk to human beings.

In Vitro Methods as a Tool in Neurotoxicity Studies

1995 ◽  
Vol 23 (4) ◽  
pp. 491-496
Author(s):  
Hanna Tähti ◽  
Leila Vaalavirta ◽  
Tarja Toimela
Keyword(s):  
Risk Evaluation ◽  
Toxicity Testing ◽  
In Vitro Models ◽  
In Vitro Tests ◽  
Industrial Chemicals ◽  
Mercury Compounds ◽  
Toxicological Data ◽  
In Vivo Tests

— There are several hundred industrial chemicals with neurotoxic potential. The neurotoxic risks of most of these chemicals are unknown. Additional methods are needed to assess the risks more effectively and to elucidate the mechanisms of neurotoxicity more accurately than is possible with the conventional methods. This paper deals with general tasks concerning the use of in vitro models in the evaluation of neurotoxic risks. It is based on our previous studies with various in vitro models and on recent literature. The induction of glial fibrillary acidic protein in astrocyte cultures after treatment with known neurotoxicants (mercury compounds and aluminium) is discussed in more detail as an important response which can be detected in vitro. When used appropriately with in vivo tests and with previous toxicological data, in vitro neurotoxicity testing considerably improves risk assessment. The incorporation of in vitro tests into the early stages of risk evaluation can reduce the number of animals used in routine toxicity testing, by identifying chemicals with high neurotoxic potential.

Production and Characterization of Porous Starch Granule and Poly(butylene adipate-co-terephthalate) Blend as a Bio-Composite

2012 ◽  
Vol 550-553 ◽  
pp. 1513-1521
Author(s):  
Sirirat Thothong ◽  
Klanarong Sriroth ◽  
Rattana Tantatherdtam ◽  
Amnat Jarerat
Keyword(s):  
Starch Granule ◽  
Rice Starch ◽  
Starch Granules ◽  
Screw Extruder ◽  
Elongation At Break ◽  
Single Screw ◽  
Single Screw Extruder ◽  
Scanning Electron ◽  
Granular Starch

To improve the miscibility of native rice starch granules and poly(butylene adipate-co-terephthalate)(PBAT), rice starch was hydrolyzed by a mixture of α-amylase and amyloglucosidase. The obtained porous rice granular starch was then mechanically blended with PBAT by single screw extruder. Many pits and holes on the surface of starch granules were observed by scanning electron microscopy (SEM). The rough surface of the rice starch granules improved the compatibility of the polymers in the blends, which consequently increased the tensile strength and the elongation at break. In addition, SEM also revealed that the porous granules were homogeneously distributed in the polymer matrix with no appearance of gaps.

Sign in / Sign up

Export Citation Format

Share Document