scholarly journals UV Stimulated Manganese Dioxide for the Persulfate Catalytic Degradation of Bisphenol A

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 502
Author(s):  
Guihua Dong ◽  
Bing Chen ◽  
Bo Liu ◽  
Stanislav R. Stoyanov ◽  
Yiqi Cao ◽  
...  
Keyword(s):  
Bisphenol A ◽  
Reaction Mechanisms ◽  
Reduction Rate ◽  
Catalytic Degradation ◽  
Gas Chromatography Mass Spectrometry ◽  
Degradation Pathways ◽  
Industrial Chemicals ◽  
Oh Groups ◽  
Long Term Adverse Effects

One of the most commonly produced industrial chemicals worldwide, bisphenol A (BPA), is used as a precursor in plastics, resins, paints, and many other materials. It has been proved that BPA can cause long-term adverse effects on ecosystems and human health due to its toxicity as an endocrine disruptor. In this study, we developed an integrated MnO2/UV/persulfate (PS) process for use in BPA photocatalytic degradation from water and examined the reaction mechanisms, degradation pathways, and toxicity reduction. Comparative tests using MnO2, PS, UV, UV/MnO2, MnO2/PS, and UV/PS processes were conducted under the same conditions to investigate the mechanism of BPA catalytic degradation by the proposed MnO2/UV/PS process. The best performance was observed in the MnO2/UV/PS process in which BPA was completely removed in 30 min with a reduction rate of over 90% for total organic carbon after 2 h. This process also showed a stable removal efficiency with a large variation of pH levels (3.6 to 10.0). Kinetic analysis suggested that 1O2 and SO4•− played more critical roles than •OH for BPA degradation. Infrared spectra showed that UV irradiation could stimulate the generation of –OH groups on the MnO2 photocatalyst surface, facilitating the PS catalytic degradation of BPA in this process. The degradation pathways were further proposed in five steps, and thirteen intermediates were identified by gas chromatography-mass spectrometry. The acute toxicity was analyzed during the treatment, showing a slight increase (by 3.3%) in the first 30 min and then a decrease by four-fold over 2 h. These findings help elucidate the mechanism and pathways of BPA degradation and provide an effective PS catalytic strategy.

scholarly journals Iodine-Loaded Calcium Titanate for Bone Repair with Sustainable Antibacterial Activity Prepared by Solution and Heat Treatment

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2199
Author(s):  
Seiji Yamaguchi ◽  
Phuc Thi Minh Le ◽  
Seine A. Shintani ◽  
Hiroaki Takadama ◽  
Morihiro Ito ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Antibacterial Activity ◽  
Bone Repair ◽  
Reduction Rate ◽  
Calcium Titanate ◽  
Apatite Formation ◽  
Oh Groups ◽  
Long Term Stability ◽  
Combined Solution

In the orthopedic and dental fields, simultaneously conferring titanium (Ti) and its alloy implants with antibacterial and bone-bonding capabilities is an outstanding challenge. In the present study, we developed a novel combined solution and heat treatment that controllably incorporates 0.7% to 10.5% of iodine into Ti and its alloys by ion exchange with calcium ions in a bioactive calcium titanate. The treated metals formed iodine-containing calcium-deficient calcium titanate with abundant Ti-OH groups on their surfaces. High-resolution XPS analysis revealed that the incorporated iodine ions were mainly positively charged. The surface treatment also induced a shift in the isoelectric point toward a higher pH, which indicated a prevalence of basic surface functionalities. The Ti loaded with 8.6% iodine slowly released 5.6 ppm of iodine over 90 days and exhibited strong antibacterial activity (reduction rate >99%) against methicillin-resistant Staphylococcus aureus (MRSA), S. aureus, Escherichia coli, and S. epidermidis. A long-term stability test of the antibacterial activity on MRSA showed that the treated Ti maintained a >99% reduction until 3 months, and then it gradually decreased after 6 months (to a 97.3% reduction). There was no cytotoxicity in MC3T3-E1 or L929 cells, whereas apatite formed on the treated metal in a simulated body fluid within 3 days. It is expected that the iodine-carrying Ti and its alloys will be particularly useful for orthopedic and dental implants since they reliably bond to bone and prevent infection owing to their apatite formation, cytocompatibility, and sustainable antibacterial activity.

Immunological mechanisms of chronic liver lesions under the influence of chemicals

2020 ◽  
pp. 536-537
Author(s):  
G. S. Agzamova ◽  
M. M. Abdullaeva
Keyword(s):  
The Body ◽  
Chronic Liver ◽  
Toxic Substances ◽  
Liver Lesions ◽  
Industrial Chemicals ◽  
Toxic Agent ◽  
Chronic Poisoning ◽  
Immunological Mechanisms ◽  
T System

The immunological profile of chronic liver lesions depending on the toxic agent was studied. It was revealed that chronic poisoning by industrial toxic substances causes changes in the functional state of the T-system of immunity, long-term contact with industrial chemicals leads to increased sensitization to autoantigens of the body.

Oil pollution and fisheries

1982 ◽  
Vol 297 (1087) ◽  
pp. 401-411 ◽  
Keyword(s):  
Water Quality ◽  
Adverse Effects ◽  
Oil Pollution ◽  
Coastal Areas ◽  
Short Term ◽  
Fish Stocks ◽  
Local Impacts ◽  
Reduced Water ◽  
Long Term Adverse Effects

The term ‘pollution’ is taken in its broadest sense and effects are recognized to be due to interference, tainting and toxicity. Each of these types of impact is discussed and assessed. It is concluded that no long-term adverse effects on fish stocks can be attributed to oil but that local impacts can be extremely damaging in the short term and that produce from specific localities can be tainted and unmarketable for long periods. In some coastal areas oil can be one among several contributors to reduced water quality, and the implications of this are discussed.

scholarly journals Heterogeneous Photo-Fenton Catalytic Degradation of Practical Pharmaceutical Wastewater by Modified Attapulgite Supported Multi-Metal Oxides

Water ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 156
Author(s):  
Manjing Lu ◽  
Jiaqi Wang ◽  
Yuzhong Wang ◽  
Zhengguang He
Keyword(s):  
Photocatalytic Oxidation ◽  
Removal Rate ◽  
Catalytic Degradation ◽  
Gas Chromatography Mass Spectrometry ◽  
Pharmaceutical Wastewater ◽  
High Concentration ◽  
Modified Attapulgite ◽  
Cod Removal Rate ◽  
Pre Treatment ◽  
Almost All

Chemical synthetic pharmaceutical wastewater has characteristics of high concentration, high toxicity and poor biodegradability, so it is difficult to directly biodegrade. We used acid modified attapulgite (ATP) supported Fe-Mn-Cu polymetallic oxide as catalyst for multi-phase Fenton-like ultraviolet photocatalytic oxidation (photo-Fenton) treatment with actual chemical synthetic pharmaceutical wastewater as the treatment object. The results showed that at the initial pH of 2.0, light distance of 20 cm, and catalyst dosage and hydrogen peroxide concentration of 10.0 g/L and 0.5 mol/L respectively, the COD removal rate of wastewater reached 65% and BOD5/COD increased to 0.387 when the reaction lasted for 180 min. The results of gas chromatography-mass spectrometry (GC-MS) indicated that Fenton-like reaction with Fe-Mn-Cu@ATP had good catalytic potential and significant synergistic effect, and could remove almost all heterocycle compounds well. 3D-EEM (3D electron microscope) fluorescence spectra showed that the fluorescence intensity decreased significantly during catalytic degradation, and the UV humus-like and fulvic acid were effectively removed. The degradation efficiency of the nanocomposite only decreased by 5.8% after repeated use for 6 cycles. It seems appropriate to use this process as a pre-treatment for actual pharmaceutical wastewater to facilitate further biological treatment.

Adipose tissue triglyceride turnover, de novo lipogenesis, and cell proliferation in humans measured with 2H2O

2004 ◽  
Vol 286 (4) ◽  
pp. E577-E588 ◽  
Author(s):  
A. Strawford ◽  
F. Antelo ◽  
M. Christiansen ◽  
M. K. Hellerstein
Keyword(s):  
Cell Proliferation ◽  
Adipose Tissue ◽  
Half Life ◽  
De Novo ◽  
Human Subjects ◽  
De Novo Lipogenesis ◽  
Gas Chromatography Mass Spectrometry ◽  
Distribution Analysis ◽  
Mass Isotopomer Distribution Analysis

The turnover of adipose tissue components (lipids and cells) and the pathways of adipose lipid deposition have been difficult to measure in humans. We apply here a 2H2O long-term labeling technique for concurrent measurement of adipose-triglyceride (TG) turnover, cell (DNA) proliferation, and de novo lipogenesis (DNL). Healthy subjects drank 2H2O (70 ml/day) for 5-9 wk. Subcutaneous adipose tissue aspirates were taken (gluteal, thigh, and flank depots). Deuterium incorporation into TG glycerol (representing all-source TG synthesis), TG palmitate (representing DNL, by mass isotopomer distribution analysis), and DNA (representing cell proliferation) was measured by gas chromatography-mass spectrometry. Subjects tolerated the protocol well, and body 2H2O enrichments were stable. Mean TG-glycerol fractional synthesis was 0.12 (i.e., 12%) with a range of 0.03-0.32 after 5 wk and 0.20 (range 0.08-0.49) after 9 wk (TG half-life 200-270 days). Label decay measurements 5-8 mo after discontinuing 2H2O gave similar turnover estimates. Net lipolysis (TG turnover) was 50-60 g/day. DNL contribution to adipose-TG was 0.04 after 9 wk, representing ∼20% of newly deposited TG. Cell proliferation was 0.10-0.17 after 9 wk (half-life 240-425 days). In summary, long-term 2H2O administration to human subjects allows measurement of the dynamics of adipose tissue components. Turnover of all elements is slow, and DNL contributes ∼20% of new TG.

Sign in / Sign up

Export Citation Format

Share Document