Peroxide−Acetic Acid Pretreatment To Remove Bagasse Lignin Prior to Enzymatic Hydrolysis

2010 ◽  
Vol 49 (4) ◽  
pp. 1473-1479 ◽  
Author(s):  
He Tan ◽  
Rallming Yang ◽  
Weidong Sun ◽  
Shuangfei Wang
Keyword(s):  
Acetic Acid ◽  
Enzymatic Hydrolysis ◽  
Acid Pretreatment

scholarly journals Alkaline post-incubation improves the saccharification of poplar after hydrogen peroxide–acetic acid pretreatment

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Peiyao Wen ◽  
Ying Zhang ◽  
Junjun Zhu ◽  
Yong Xu ◽  
Junhua Zhang
Keyword(s):  
Hydrogen Peroxide ◽  
Acetic Acid ◽  
Enzymatic Hydrolysis ◽  
High Concentration ◽  
Acid Pretreatment ◽  
Glucose Yield ◽  
Selective Delignification ◽  
Acetyl Group ◽  
The Cost ◽  
Total Lignin

Abstract Background Hydrogen peroxide–acetic acid (HPAA) is widely used in pretreatment of lignocellulose because it has a good capability in selective delignification. However, high concentration (more than 60%) of HPAA increases the cost of pretreatment and the risk of explosion. In this work, alkaline post-incubation was employed to decrease the HPAA loading and improve the saccharification of poplar. Results Pretreatment with 100% HPAA removed 91.0% lignin and retained 89.9% glucan in poplar. After poplar was pretreated by 100% HPAA at 60 °C for 2 h, the glucan conversion in enzymatic hydrolysis by cellulase increased to 90.1%. Alkaline incubation reduced the total lignin, surface lignin, and acetyl group of HPAA-pretreated poplar. More than 92% acetyl groups of HPAA-pretreated poplar were removed by alkaline incubation with 1.0% NaOH at 50 °C for 1 h. After incubation of 60% HPAA-pretreated poplar with 1.0% NaOH, the glucan conversion enhanced to 95.0%. About 40% HPAA loading in pretreatment was reduced by alkaline incubation without the decrease of glucose yield. Conclusions Alkaline post-incubation had strong ability on the deacetylation and delignification of HPAA-pretreated poplar, exhibiting a strong promotion on the enzymatic hydrolysis yield. This report represented alkaline incubation reduced the HPAA loading, improved pretreatment safety, exhibiting excellent potential application in saccharification of poplar.

DO WEAK OR STRONG ACIDS REMOVE CARBONATE CONTAMINATION FROM ANCIENT TOOTH ENAMEL MORE EFFECTIVELY? THE EFFECT OF ACID PRETREATMENT ON RADIOCARBON AND δ13C ANALYSES

Radiocarbon ◽  
2021 ◽  
pp. 1-18
Author(s):  
Rachel Wood ◽  
Andre Barros Curado Fleury ◽  
Stewart Fallon ◽  
Thi Mai Huong Nguyen ◽  
Anh Tuan Nguyen
Keyword(s):  
Acetic Acid ◽  
Chelating Agents ◽  
Tooth Enamel ◽  
Mineral Phase ◽  
Acid Pretreatment ◽  
Skeletal Material ◽  
Lower Porosity ◽  
Hot Environments ◽  
Strong Acids

ABSTRACT In hot environments, collagen, which is normally targeted when radiocarbon (14C) dating bone, rapidly degrades. With little other skeletal material suitable for 14C dating, it can be impossible to obtain dates directly on skeletal materials. A small amount of carbonate occurs in hydroxyapatite, the mineral phase of bone and tooth enamel, and has been used as an alternative to collagen. Unfortunately, the mineral phase is often heavily contaminated with exogenous carbonate causing 14C dates to underestimate the true age of a sample. Although tooth enamel, with its larger, more stable crystals and lower porosity, is likely to be more robust to diagenesis than bone, little work has been undertaken to investigate how exogenous carbonate can be effectively removed prior to 14C dating. Typically, acid is used to dissolve calcite and etch the surface of the enamel, but it is unclear which acid is most effective. This study repeats and extends earlier work using a wider range of samples and acids and chelating agents (hydrochloric, lactic, acetic and propionic acids, and EDTA). We find that weaker acids remove carbonate contaminants more effectively than stronger acids, and acetic acid is the most effective. However, accurate dates cannot always be obtained.

scholarly journals Improvement of Enzymatic Saccharification of Cellulose-Containing Raw Materials Using Aspergillus niger

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1360
Author(s):  
Ekaterina Budenkova ◽  
Stanislav Sukhikh ◽  
Svetlana Ivanova ◽  
Olga Babich ◽  
Vyacheslav Dolganyuk ◽  
...  
Keyword(s):  
Enzymatic Hydrolysis ◽  
Aspergillus Niger ◽  
Filter Paper ◽  
Raw Materials ◽  
Enzymatic Saccharification ◽  
Wood Chip ◽  
Cellulase Activity ◽  
Wood Chips ◽  
Acid Pretreatment ◽  
Hydrolysis Of

Enzymatic hydrolysis of cellulose-containing raw materials, using Aspergillus niger, were studied. Filter paper, secondary cellulose-containing or starch-containing raw materials, miscanthus cellulose after alkaline or acid pretreatment, and wood chip cellulose, were used as substrates. The study focused on a wild A. niger strain, treated, or not (control), by ultraviolet (UV) irradiations for 45, 60, or 120 min (UV45, UV60, or UV120), or by UV irradiation for 120 min followed by a chemical treatment with NaN3 + ItBr for 30 min or 80 min (UV120 + CH30 or UV120 + CH80). A mixture of all the A. niger strains (MIX) was also tested. A citrate buffer, at 50 mM, wasthe most suitable for enzymatic hydrolysis. As the UV exposure time increased to 2 h, the cellulase activity of the surviving culturewas increased (r = 0.706; p < 0.05). The enzymatic activities of the obtained strains, towards miscanthus cellulose, wood chips, and filter paper, were inferior to those obtained with commercial enzymes (8.6 versus 9.1 IU), in some cases. Under stationary hydrolysis at 37 °C, pH = 4.7, the enzymatic activity of A. niger UV120 + CH30 was 24.9 IU. The enzymatic hydrolysis of secondary raw materials, using treated A. niger strains, was themost effective at 37 °C. Similarly, the most effective treatment of miscanthus cellulose and wood chips occurred at 50 °C. The maximum conversion of cellulose to glucose was observed using miscanthus cellulose (with alkaline pretreatment), and the minimum conversion was observed when using wood chips. The greatest value of cellulase activity was evidenced in the starch-containing raw materials, indicating that A. niger can ferment not only through cellulase activity, but also via an amylolytic one.

scholarly journals A novel recyclable furoic acid-assisted pretreatment for sugarcane bagasse biorefinery in co-production of xylooligosaccharides and glucose

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Lin Dai ◽  
Tian Huang ◽  
Kankan Jiang ◽  
Xin Zhou ◽  
Yong Xu
Keyword(s):  
Enzymatic Hydrolysis ◽  
Sugarcane Bagasse ◽  
Production Cost ◽  
Solid Loading ◽  
Fed Batch ◽  
Acid Pretreatment ◽  
Furoic Acid ◽  
Cooling Crystallization ◽  
Mineral Acids ◽  
Hydrolysis Of

Abstract Background Pretreatment is the key step for utilizing lignocellulosic biomass, which can extract cellulose from lignin and disrupt its recalcitrant crystalline structure to allow much more effective enzymatic hydrolysis; and organic acids pretreatment with dual benefic for generating xylooligosaccharides and boosting enzymatic hydrolysis has been widely used in adding values to lignocellulose materials. In this work, furoic acid, a novel recyclable organic acid as catalyst, was employed to pretreat sugarcane bagasse to recover the xylooligosaccharides fraction from hemicellulose and boost the subsequent cellulose saccharification. Results The FA-assisted hydrolysis of sugarcane bagasse using 3% furoic acid at 170 °C for 15 min resulted in the highest xylooligosaccharides yield of 45.6%; subsequently, 83.1 g/L of glucose was harvested by a fed-batch operation with a solid loading of 15%. Overall, a total of 120 g of xylooligosaccharides and 335 g glucose could be collected from 1000 g sugarcane bagasse starting from the furoic acid pretreatment. Furthermore, furoic acid can be easily recovered by cooling crystallization. Conclusion This work put forward a novel furoic acid pretreatment method to convert sugarcane bagasse into xylooligosaccharides and glucose, which provides a strategy that the sugar and nutraceutical industries can be used to reduce the production cost. The developed process showed that the yields of xylooligosaccharides and byproducts were controllable by shortening the reaction time; meanwhile, the recyclability of furoic acid also can potentially reduce the pretreatment cost and potentially replace the traditional mineral acids pretreatment.

scholarly journals Understanding the effects of different residual lignin fractions in acid-pretreated bamboo residues on its enzymatic digestibility

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Wenqian Lin ◽  
Jinlai Yang ◽  
Yayue Zheng ◽  
Caoxing Huang ◽  
Qiang Yong
Keyword(s):  
Enzymatic Hydrolysis ◽  
Negative Impact ◽  
Dilute Acid Pretreatment ◽  
Residual Lignin ◽  
Dilute Acid ◽  
Enzymatic Digestibility ◽  
Acid Pretreatment ◽  
Organic Reagents ◽  
Milled Wood Lignin ◽  
Affinity Constants

Abstract Background During the dilute acid pretreatment process, the resulting pseudo-lignin and lignin droplets deposited on the surface of lignocellulose and inhibit the enzymatic digestibility of cellulose in lignocellulose. However, how these lignins interact with cellulase enzymes and then affect enzymatic hydrolysis is still unknown. In this work, different fractions of surface lignin (SL) obtained from dilute acid-pretreated bamboo residues (DAP-BR) were extracted by various organic reagents and the residual lignin in extracted DAP-BR was obtained by the milled wood lignin (MWL) method. All of the lignin fractions obtained from DAP-BR were used to investigate the mechanism for interaction between lignin and cellulase using surface plasmon resonance (SPR) technology to understand how they affect enzymatic hydrolysis Results The results showed that removing surface lignin significantly decreased the yield for enzymatic hydrolysis DAP-BR from 36.5% to 18.6%. The addition of MWL samples to Avicel inhibited its enzymatic hydrolysis, while different SL samples showed slight increases in enzymatic digestibility. Due to the higher molecular weight and hydrophobicity of MWL samples versus SL samples, a stronger affinity for MWL (KD = 6.8–24.7 nM) was found versus that of SL (KD = 39.4–52.6 nM) by SPR analysis. The affinity constants of all tested lignins exhibited good correlations (r > 0.6) with the effects on enzymatic digestibility of extracted DAP-BR and Avicel. Conclusions This work revealed that the surface lignin on DAP-BR is necessary for maintaining enzyme digestibility levels, and its removal has a negative impact on substrate digestibility.

scholarly journals Peningkatan Produksi Gula Pereduksi dari Tandan Kosong Kelapa Sawit dengan Praperlakuan Asam Organik pada Reaktor Bertekanan

REAKTOR ◽  
2017 ◽  
Vol 16 (4) ◽  
pp. 199
Author(s):  
Fahriya Puspita Sari ◽  
Nissa Nurfajrin Solihat ◽  
Sita Heris Anita ◽  
Fitria Fitria ◽  
Euis Hermiati
Keyword(s):  
Enzymatic Hydrolysis ◽  
Oxalic Acid ◽  
Organic Acid ◽  
Oil Palm ◽  
Maleic Acid ◽  
Reducing Sugar ◽  
Sugar Production ◽  
Empty Fruit Bunch ◽  
Acid Pretreatment ◽  
Severity Factor

ENHANCEMENT OF REDUCING SUGAR PRODUCTION FROM OIL PALM EMPTY FRUIT BUNCH BY PRETREATMENT USING ORGANIC ACID IN PRESSURIZED REACTOR. Organic acids are potential to create more environmentally friendly process in the pretreatment of lignocellulosic biomass for bioethanol production. This study was aimed to investigate the influence of organic acid pretreatment in reducing sugar production in a pressurized reactor with various resident times and temperatures on enzymatic hydrolysis of OPEFB. Two different organic acids (maleic acid and oxalic acid) were used in the pretreatment of oil palm empty fruit bunch (OPEFB) using a pressurized reactor. Factorial design using three different temperatures (170, 180, and 190°C) and four resident times (15, 30, 45, and 60 min) were employed, followed by enzymatic hydrolysis. Each condition conducted two repetitions. Analysis was conducted on the reducing sugar that was produced after saccharification by means of the severity factor of each pretreatment condition. Maleic acid showed higher reducing sugar yield with lower severity factor than oxalic acid with the same operating conditions. The highest yield of reducing sugars (80.84%) was obtained using maleic acid at 170 for 60 minutes with severity factor of 1.836. Keywords: bioethanol; organic acid pretreatment; pressurized reactor; severity factor; oil palm empty fruit bunches;   Abstrak Asam organik berpotensi dalam membantu proses praperlakuan dari biomassa lignoselulosa untuk memproduksi bioetanol yang ramah lingkungan. Penelitian ini bertujuan untuk mengetahui pengaruh asam organik, suhu dan waktu operasi terhadap produksi gula pereduksi dengan reaktor bertekanan pada tandan kosong kelapa sawit. Dua asam organik yang berbeda yaitu asam oksalat dan asam maleat digunakan untuk proses praperlakuan tandan kosong kelapa sawit (TKKS) dengan bantuan reaktor bertekanan. Dalam proses praperlakuan digunakan tiga suhu yang berbeda yaitu suhu 170, 180, dan 190°C dan empat waktu operasi 15, 30, 45, dan 60 min yang dilanjutkan dengan proses hidrolisis enzimatis. Setiap kondisi dilakukan dua kali pengulangan. Analisa yang digunakan adalah analisa uji gula pereduksi dan severity factor pada kondisi tiap praperlakuan. Asam maleat menunjukkan hasil yang lebih baik dengan severity factor yang lebih rendah dibandingkan menggunakan asam oksalat dengan kondisi operasi yang sama. Hasil yang didapatkan menunjukkan bahwa praperlakuan tandan kosong kelapa sawit dengan bantuan reaktor bertekanan memiliki rendemen gula pereduksi optimum sebesar 80,84% dengan menggunakan asam maleat pada suhu 170°C selama 60 menit dengan severity factor sebesar 1,836. Kata kunci: bioetanol; praperlakuan asam organik; reaktor bertekanan; severity factor; tandan kosong kelapa sawit.

scholarly journals Investigation of interaction between cellulase and residual lignin fractions in acid-pretreated bamboo residues and their effect on enzymatic digestibility

2021 ◽  
Author(s):  
Wenqian Lin ◽  
Jinlai Yang ◽  
Yayue Zheng ◽  
Caoxing Huang ◽  
Qiang Yong
Keyword(s):  
Enzymatic Hydrolysis ◽  
Negative Impact ◽  
Interaction Mechanism ◽  
Dilute Acid Pretreatment ◽  
Affinity Constant ◽  
Residual Lignin ◽  
Dilute Acid ◽  
Enzymatic Digestibility ◽  
Acid Pretreatment ◽  
Hydrolysis Of

Abstract Background: During dilute acid pretreatment, pseudo lignin and lignin form droplets which deposit on the surface of lignocellulose, and further inhibit its enzymatic hydrolysis. However, how this lignin interacts with cellulase enzymes and then affects enzymatic hydrolysis is still unknown. In this work, different fractions of surface lignin (SL) obtained from dilute acid pretreated bamboo residues (DAP-BR) were extracted by various organic reagents and the residual lignin in extracted DAP-BR was obtained by milled wood lignin (MWL) method. All the obtained lignin fractions from DAP-BR were used to investigate the interaction mechanism between lignin and cellulase using surface plasmon resonance (SPR) technology in order to understand how they affect enzymatic hydrolysisResults: Results showed that removing surface lignin significantly decrease the enzymatic hydrolysis of DAP-BR from 36.5% to 18.6%. The addition of MWL samples to Avicel decreased enzymatic hydrolysis of Avicel, while different SL samples showed a slight increase to its enzymatic digestibility. Due to the higher molecular weight and hydrophobicity of MWL samples versus the SL samples, stronger affinity for MWL (KD = 6.8-24.7 nM) was found versus that of SL (KD = 39.4-52.6 nM) by SPR analysis. The affinity constant of all tested lignin had good correlations (R2>0.6) with their effects on enzymatic digestibility of extracted DAP-BR and Avicel.Conclusions: This work reveals that the surface lignin on DAP-BR is necessary towards maintaining enzyme digestibility levels, and its removal has a negative impact on the substrate’s digestibility.

scholarly journals A novel recyclable furoic acid-assisted pretreatment for sugarcane bagasse biorefinery in co-production of xylooligosaccharides and glucose

2020 ◽  
Author(s):  
Lin Dai ◽  
Tian Huang ◽  
Kankan Jiang ◽  
Xin Zhou ◽  
Yong Xu
Keyword(s):  
Enzymatic Hydrolysis ◽  
Sugarcane Bagasse ◽  
Production Cost ◽  
Solid Loading ◽  
Fed Batch ◽  
Acid Pretreatment ◽  
Furoic Acid ◽  
Cooling Crystallization ◽  
Mineral Acids ◽  
Hydrolysis Of

Abstract Background: Pretreatment is the key step for utilizing lignocellulosic biomass, which can extract cellulose from lignin and disrupt its recalcitrant crystalline structure to allow much more effective enzymatic hydrolysis; and organic acids pretreatment with dual benefic for generating xylooligosaccharides and boosting enzymatic hydrolysis has been widely used in adding values to lignocellulose materials. In this work, furoic acid, a novel recyclable organic acid as catalyst, was employed to pretreat sugarcane bagasse to recover the xylooligosaccharides fraction from hemicellulose and boost the subsequent cellulose saccharification. Results: The FA-assisted hydrolysis of sugarcane bagasse using 3% furoic acid at 170 oC for 15 min resulted in the highest xylooligosaccharides yield of 45.6%; subsequently, 83.1 g/L of glucose was harvested by a fed-batch operation with a solid loading of 15%. Overall, a total of 120 g of xylooligosaccharides and 335 g glucose could be collected from 1000 g sugarcane bagasse starting from the furoic acid pretreatment. Furthermore, furoic acid can be easily recovered by cooling crystallization.Conclusion: This work put forward a novel furoic acid pretreatment method to convert sugarcane bagasse into xylooligosaccharides and glucose, which provides a strategy that the sugar and nutraceutical industries can be used to reduce the production cost. The developed process showed that the yields of xylooligosaccharides and byproducts were controllable by shortening the reaction time; meanwhile, the recyclability of furoic acid also can potentially reduce the pretreatment cost and potentially replace the traditional mineral acids pretreatment.

Sign in / Sign up

Export Citation Format

Share Document