Is a Trait Really the Mean of States?

2012 ◽  
Vol 33 (3) ◽  
pp. 131-137 ◽  
Author(s):  
Adam A Augustine ◽  
Randy J. Larsen

Although several definitions exist, a personality trait can be defined as the average or expected value of personality-relevant behaviors. However, recent evidence suggests that, while trait questionnaires and aggregated momentary assessments of personality are highly related, they may also differ in meaningful ways. In this study, we examine the relationship between trait and mean state personality. Results indicate that these two assessment strategies, although highly related, do not show convergence (r = .39–.64) levels that would signify an equity of constructs. In line with this, these two assessment strategies show differential predictive utility. Although the pattern of this differential predictive utility suggests that measurement error may account for differences, the difference between trait and mean state personality predicts affect in a manner consistent with self-discrepancy theory. Thus, although these two constructs are highly related, the differences between trait and mean state personality are meaningful.

2016 ◽  
Vol 8 (4) ◽  
pp. 158
Author(s):  
Abolfazl Zolfaghari

<p>Cheating and academic dishonesty is a moral anomaly in the field of scientific research and reflecting, i.e., academic environment and studies show that this phenomenon in many of the worlds is important problem.</p><p>This study measured the dishonesty of students in a quasi-experimental design. For this purpose, features lack of integrity by manipulating the facts were examined and meanwhile first, basic English language test coordination between the strict terms of the 280 students come to practice and after correction of examination papers by teachers, without leaving any traces on them instead, the plates are returned to students and provide them with answers to their paper to correct their score Master announced. The difference between the actual score (score of master) and score of the students to have their own, amount of honesty or lack of integrity appointed them and its relationship with some demographic and socio-ethical characteristics have been studied.</p><p>The results showed that more than 62 percent of the students in your grade to master completely honest with 26.6 percent have low honesty and the rest did not have the necessary integrity and the mean difference of scores announced by the professors and students have been about two score. Also results of chi-square tests and gamma, about the relationship between students’ evaluation of amount of sincerity with sincerity in the declared objective amount of the master score was not significant, this finding means that between demonstrators and people of integrity and honesty in practice, there are gaps.</p>


2020 ◽  
Author(s):  
Yuan-jing Leng ◽  
Hai-bin Zhou ◽  
Jiang-ling Fu ◽  
Wen-juan Wang

Abstract PURPOSECarbonic anhydrase-2 (CA-2) plays a role in mineralization and calcification in organism. Strong evidence suggests that CA-2 is associated with urolithiasis. However, the relationship between CA-2 and urinary stone remains unclear. The study aimed to assess the association of urine CA-2 (uCA-2) level and the potential risk of urinary stone.METHODSFrom March 2017 to November 2019, a prospective cohort study was conducted on patients with urinary stones and healthy subjects to determine the pretreatment uCA-2 level detection by Enzyme linked immunosorbent assay (ELISA). The difference of uCA-2 level between patients with urinary stones and healthy subjects was compared. Then comparison between stone patients with complications and without complications was carried out as well as correlation analysis to detect factors associated with biomarker expression.RESULTS118 patients with urinary stones were into urinary stones group and 42 healthy subjects were into healthy control group. The mean pretreatment uCA-2 level was significantly higher in patients with urinary stones group than healthy controls group (P=0.028). Furthermore, The uCA-2 level was positive correlation with urinary stones complications (R=0.379, P=0.000), especially pain complications (R=0.524, P=0.000) and hematuria complications (R=0.374, P=0.000). Receiver operating characteristic curve (ROC) analysis that a uCA-2 level threshold of 10.94 ng/mL had 83.67% sensitivity and 68.12% specificity for predicting urinary stones complications. CONCLUSIONSExcessive uCA-2 excretion is a major risk factor for urinary stone. Our findings suggested that uCA-2 may be used as an unappreciated biomarker for the diagnosis urinary stone in patients and to predict its complications.


2021 ◽  
Author(s):  
Stephan van der Westhuizen ◽  
Gerard Heuvelink ◽  
David Hofmeyr

&lt;p&gt;Digital soil mapping (DSM) may be defined as the use of a statistical model to quantify the relationship between a certain observed soil property at various geographic locations, and a collection of environmental covariates, and then using this relationship to predict the soil property at locations where the property was not measured. It is also important to quantify the uncertainty with regards to prediction of these soil maps. An important source of uncertainty in DSM is measurement error which is considered as the difference between a measured and true value of a soil property.&lt;/p&gt;&lt;p&gt;The use of machine learning (ML) models such as random forests (RF) has become a popular trend in DSM. This is because ML models tend to be capable of accommodating highly non-linear relationships between the soil property and covariates. However, it is not clear how to incorporate measurement error into ML models. In this presentation we will discuss how to incorporate measurement error into some popular ML models, starting with incorporating weights into the objective function of ML models that implicitly assume a Gaussian error. We will discuss the effect that these modifications have on prediction accuracy, with reference to simulation studies.&lt;/p&gt;


2019 ◽  
Vol 27 (2) ◽  
pp. 230949901986122
Author(s):  
Ali Sahin ◽  
Mehmet Emin Simsek ◽  
Safa Gursoy ◽  
Mustafa Akkaya ◽  
Cetin Isik ◽  
...  

Background: This study aimed to evaluate the effect of total hip arthroplasty (THA) on sagittal pelvic parameters and to evaluate the effect of sagittal pelvic parameters on acetabular cup orientation. Methods: The study included 86 patients who underwent THA for a diagnosis of unilateral coxarthrosis between 2011 and 2015. Measurements were taken of the preoperative and postoperative acetabular cup inclination (ACI), anteversion, and sagittal pelvic parameters. The effect of THA on sagittal pelvic parameters and the effects of the sagittal pelvic parameters on acetabular cup orientation were investigated. Results: The sagittal pelvic tilt values calculated were mean 9.7° ± 6.3° (2°; 23°) preoperatively and 11.0° ± 6.1° (2°; 25°) postoperatively. The increase in postoperative pelvic incidence (PI) values was determined to be statistically significant ( p < 0.05). The preoperative PI values had no significant effect on ACI, but in cases with high preoperative PI values, a tendency to high anteversion values was determined. The mean inclination values were found to be 40.2° ± 11.0° in the low PI group, 41.7° ± 7.4° in the normal PI group, and 44.1° ± 8.3° in the high PI group. As no increase in inclination values was observed with an increase in PI values, no statistical correlation was determined ( p = 0.343). Average of anteversion values in the low PI group was 9.2° ± 13.7°, in the normal PI group 19.3° ± 10.5°, and in the high PI group 21.1° ± 12.5°. The difference between the groups was statistically significant ( p = 0.001). Conclusion: Evaluating the results of this study, it can be concluded that varying PI values do affect the acetabular cup anterversion in THA. So, preoperative assessment of PI values is important in preventing postoperative acetabular cup malposition.


1981 ◽  
Vol 11 (1) ◽  
pp. 44-46 ◽  
Author(s):  
D.P. Fourie

It is increasingly realized that hypnosis may be seen from an interpersonal point of view, meaning that it forms part of the relationship between the hypnotist and the subject. From this premise it follows that what goes on in the relationship prior to hypnosis probably has an influence on the hypnosis. Certain of these prior occurences can then be seen as waking suggestionns (however implicitly given) that the subject should behave in a certain way with regard to the subsequent hypnosis. A study was conducted to test the hypothesis that waking suggestions regarding post-hypnotic amnesia are effective. Eighteen female subjects were randomly divided into two groups. The groups listened to a tape-recorded talk on hypnosis in which for the one group amnesia for the subsequent hypnotic experience and for the other group no such amnesia was suggested. Thereafter the Stanford Hypnotic Susceptibility Scale was administered to all subjects. Only the interrogation part of the amnesia item of the scale was administered. The subjects to whom post-hypnotic amnesia was suggested tended to score lower on the amnesia item than the other subjects, as was expected, but the difference between the mean amnesia scores of the two groups was not significant.


1973 ◽  
Vol 58 (3) ◽  
pp. 613-625 ◽  
Author(s):  
D. M. ANDERSON

SUMMARY Pigs were fasted for 18, 39, or 72 h; they were then given two glucose infusions, the second infusion 40 min after the first. Either 0·15, 0·30 or 0·75 g glucose/kg were given at each infusion. Plasma glucose, free fatty acids, insulin and 3-hydroxybutyrate concentrations were measured. The rate of glucose removal Kt was calculated after the first infusions, (Kt1), and after the second infusion (Kt2). When food was withheld the peak insulin concentration decreased in response to glucose but lack of food only affected the mean increase in insulin concentration when 0·75 g glucose/kg was given. The value of Kt1 decreased as the period without food increased and additions of insulin did not affect the difference in Kt1 between animals fasted for 18 h and those fasted for 72 h. Plasma insulin concentration was closely related to the rate of glucose removal; the correlation coefficient (r) for maximum rate of glucose removal versus maximum insulin concentration was 0·9; and that for mean rate of glucose removal versus mean increment in insulin concentration was 0·84. It is suggested that insulin does not itself determine the rate of glucose removal but is secreted in response to the amount of glucose removed. In the pig, the Staub—Traugott phenomenon was found to occur only under special circumstances. The relationship between Kt1 and Kt2 depended on the amount of glucose infused and the time during which food was withheld. Kt2 ranged from smaller than—through the same as—to greater than Kt1. The concentrations of free fatty acids, ketones or insulin did not explain the differences.


2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Caroline Zygar-Hoffmann ◽  
Felix D. Schönbrodt

Relationship satisfaction can be assessed in retrospection, as a global evaluation, or as a momentary state. In two experience sampling studies (N = 130, N = 510) the specificities of these assessment modalities are examined. We show that 1) compared to other summary statistics like the median, the mean of relationship satisfaction states describes retrospective and global evaluations best (but the difference to some other summary statistics was negligible); 2) retrospection introduces an overestimation of the average annoyance in the relationship reported on a momentary basis, which results in an overall negative mean-level bias for retrospective relationship satisfaction; 3) this bias is most strongly moderated by global relationship satisfaction at the time of retrospection; 4) snapshots of momentary relationship satisfaction get representative of global evaluations after approximately two weeks of sampling. The findings extend the recall bias reported in the literature for retrospection of negative affect to the domain of relationship evaluations and assist researchers in designing efficient experience sampling studies.


2021 ◽  
Vol 42 (Supplement_1) ◽  
Author(s):  
S Fugar ◽  
K Deka ◽  
C Anderson ◽  
C Lama Von Buchwald ◽  
R Geroux ◽  
...  

Abstract Background Differences in mean gradients after Transcatheter valve replacement (TAVR) vary depending on the valve type and the modality used to measure the gradients. Currently there is a paucity of data on the relationship between invasive and doppler derived gradients after TAVR. Purpose We sort to assess the difference in doppler, and catheter derived aortic valve gradients after TAVR Methods This is a single center retrospective study using consecutive patients who presented for TAVR on account of native aortic valve stenosis at our institution from May 2012 till December 2020. Patients with both intraoperative invasive and postoperative doppler derived pressure gradients were included in the analysis. Student T-test were used to compare mean gradients. Pearson's correlation test was used to examine the correlation between measured gradients. Results A total of 587 patients were included in our study. Fifty one percent were male and 462 (78.7%) underwent TAVR with a balloon expandable valve. In the entire cohort the mean gradient measured invasively was significantly lower than those measured by echo doppler (4.48±3.25 vs. 5.57±3.11, P&lt;0.001). There, however, was a positive correlation between invasive and doppler measured gradients (figure 1). In those who received balloon expandable valves, the invasive gradient was 4.39±3.30 and the doppler derived gradient was 5.47±3.04 (P&lt;0.001), while in those self-expanding valves, the invasive gradient was 4.81±3.04 and doppler derived gradient was 5.94±3.36 (P&lt;0.001). Conclusion Post TAVR gradients were all significantly lower when measured invasively as compared to those measured using doppler. Self-expanding valves overall had higher residual gradients. Further studies are needed to assess the correlations between invasively measured gradients and clinical outcomes post TAVR. FUNDunding Acknowledgement Type of funding sources: None.


Author(s):  
Brigham B. Frandsen ◽  
James B. McDonald

Measurement error can have a significant impact on measures of inequality. Using a fairly flexible parametric specification of an independent multiplicative measurement error (IMME) model we explore the relationship between changes in the variance of measurement error, for a given mean of measurement error, on the Gini Coefficient. While the measured Gini is greater than the true Gini, the difference decreases as the variance of measurement error decreases. Copulas are used to relax the assumption of independence of measurement error and true income. In this case the measured Gini can be larger or smaller than the true Gini, depending on the correlation between true income and measurement error. Using the same approach with simulations the effect of a different distribution of measurement error is investigated.


Author(s):  
Daniel B. Fambro ◽  
Kay Fitzpatrick ◽  
Charles W. Russell

Horizontal and vertical elements of a highway are designed based on an assumed design speed. This concept was developed in the 1930s as a mechanism for designing rural alignments to permit most drivers to operate uniformly at their desired speed. In 1938, AASHO recognized that drivers select a speed influenced by the roadway environment instead of an assumed design speed. Recent research suggests that design speed is no longer the speed adopted by the faster group of drivers but that it has become a value used to establish the sharpness of horizontal and vertical design elements. The objective of this study was to establish the relationship between design and operating speeds for crest vertical curves with limited sight distance. Geometric data and 3,500 paired speeds (speeds at control and crest sections) were collected at 36 sites in 3 states. The results indicated that both the 85th percentile and the mean operating speeds were well above the inferred design speeds of the crest vertical curves for the range of conditions studied and that the lower the design speed the larger the difference between the 85th percentile speed and the design speed. The mean reductions in speed between the control and crest sections tend to increase as available sight distance is decreased; however, the reduction in speed is less than that suggested by current AASHTO criteria.


Sign in / Sign up

Export Citation Format

Share Document