Raman spectroscopy at mantle pressure and temperature conditions experimental set-up and the example of CaTiO3perovskite

1993 ◽  
Vol 20 (18) ◽  
pp. 1931-1934 ◽  
Author(s):  
Philippe Gillet ◽  
Guillaume Fiquet ◽  
Isabelle Daniel ◽  
Bruno Reynard
Author(s):  
D.L.M. Vasconcelos ◽  
F.F. de Sousa ◽  
J.G. da Silva Filho ◽  
A.M.R. Teixeira ◽  
P.F. Façanha Filho ◽  
...  

2017 ◽  
Vol 67 (5) ◽  
pp. 588 ◽  
Author(s):  
Kamal Kumar Gulati ◽  
Vijayeta Gambhir ◽  
M. N. Reddy

<p>Laser based time-gated Raman Spectroscopy experiments for detection and identification of nitro-aromatic sample which premixed with soil and sand in different concentrations are conducted. A back-scattered stand-off Raman spectroscopy set-up using a frequency double Nd:YAG pulsed laser (532 nm, 8 ns, 10 Hz) was employed to evaluate samples made up of standard nitro- aromatic compounds, p-nitro Benzoic acid (PNBA) premixed with soil and sand at different concentrations. A sensitive ICCD detector was used to capture the weak Raman signals buried in high background noise at optimised experiments parameters like laser pulse energy, ICCD gate width, background subtraction, number of laser pulses averaging etc. p- nitro benzoic acid up to 5 per cent (v/v) concentration in sand with appreciable signal to noise ratio has been detected. This feasibility study also becomes relevant to evaluate the remnants for post-blast detection of explosives in terrorist attack as most of the explosives used in such attacks contain nitro-aromatic based high energetic explosives.</p>


2011 ◽  
Vol 84 (1) ◽  
pp. 101-113 ◽  
Author(s):  
Johannes M. Kranenburg ◽  
Martin Van Duin ◽  
Ulrich S. Schubert

Abstract Mixing of EPDM and a peroxide curative via a solution route and subsequent curing were performed in a downscaled set-up. The resulting vulcanizates were characterized by a down-scaled hardness measurement and by Raman spectroscopy in a high-throughput experimentation compatible approach. The characterization results obtained on these vulcanizates agreed well with those obtained on corresponding vulcanizates prepared via conventional mill mixing. By indentation on vulcanizates cured for various curing times, a rheometer curve could be constructed. The conversion of the EPDM unsaturation and, thus, the extent of the addition reactions was quantified by Raman spectroscopy. Using both the indentation and the Raman data, the cross-link density resulting from combination reactions was estimated.


2013 ◽  
Vol 1549 ◽  
pp. 111-116
Author(s):  
Charlotte Frayère ◽  
Christophe Galindo ◽  
Laurent Divay ◽  
Michel Paté ◽  
Pierre Le Barny

ABSTRACTElectrodes made of single-walled carbon nanotubes (SWCNTs) chemically modified by a series of anthraquinone derivatives (AQ) have been prepared and characterized by cyclic voltammetry in 0.1M H2SO4, using the standard 3 electrode set-up and by Raman spectroscopy. It has been demonstrated that a AQ modified SWCNT electrode provided between 114 to 220% higher specific capacitance, compared to pristine SWCNT electrode, depending on the length of the spacer between SWCNT and AQ.


2014 ◽  
Vol 70 (a1) ◽  
pp. C979-C979
Author(s):  
Arthur Haozhe Liu ◽  
Lisa Luhong Wang ◽  
Lingping Kong

The rich phase diagrams from both relaxor and normal ferroelectrics under high pressure, stimulate us to study the pressure effect on the relaxor-PbTiO3 (PT) systems, to check whether the high pressure cubic structure will turn to low symmetry structure upon strong compression is the common behaviors for relaxor ferroelectrics materials. Furthermore, a complete phase diagram study of pressure-temperature effect on structure will allow us to explore the limitation on applications of relaxor-PT material devices under harsh environment involving in high pressure and high temperature conditions. Structure evolution and phase transition of several solid solution ferroelectrics, such as Pb(YbNb)O3-PT (PYN-PT), have been studied using in situ synchrotron X-ray diffraction (XRD) and Raman spectroscopy techniques under high pressure and high temperature conditions. XRD results show pressure induced phase transitions to a cubic phase, while the persistence of Raman spectroscopy in the full pressure range indicates its local distortion. A pressure-temperature phase diagram is further constructed to determine the stability region of the ferroelectric phase. The results provide useful guidance for the applications of this kind of high Curie temperature ferroelectric crystal under extreme conditions, and extra clue to synthesis of ferroelectric materials with tailored properties.


Author(s):  
Gilbert Georg Klamminger ◽  
Jean-Jacques Gérardy ◽  
Finn Jelke ◽  
Giulia Mirizzi ◽  
Rédouane Slimani ◽  
...  

Abstract Background Although microscopic assessment is still the diagnostic gold standard in pathology, non-light microscopic methods such as new imaging methods and molecular pathology have considerably contributed to more precise diagnostics. As an upcoming method, Raman spectroscopy (RS) offers a "molecular fingerprint" which could be used to differentiate tissue heterogeneity or diagnostic entities. RS has been successfully applied on fresh and frozen tissue, however more aggressively, chemically treated tissue such as formalin-fixed, paraffin-embedded (FFPE) samples are challenging for RS. Methods To address this issue, we examined FFPE samples of morphologically highly heterogeneous glioblastoma (GBM) using RS in order to classify histologically defined GBM areas according to RS spectral properties. We have set up a SVM (support vector machine)-based classifier in a training cohort and corroborated our findings in a validation cohort. Results Our trained classifier identified distinct histological areas such as tumor core and necroses in GBM with an overall accuracy of 70.5% based on spectral properties of RS. With an absolute misclassification of 21 out of 471 Raman measurements, our classifier has the property of precisely distinguishing between normal appearing brain tissue and necrosis. When verifying the suitability of our classifier system in a second independent dataset, very little overlap between necrosis and normal appearing brain tissue can be detected. Conclusion These findings show that histologically highly variable samples such as GBM can be reliably recognized by their spectral properties using RS. As a conclusion, we propose that RS may serve useful as a future method in the pathological toolbox.


Author(s):  
Robert J. Meier

Over the last years micro-Raman spectroscopy has developed to a mature subdiscipline within the field of Raman spectroscopy. Its potential power seems obvious: (a) fluorescence suppression, a major obstacle in many Raman spectra; (b) micro-analysis of samples down to 1 μm lateral resolution yielding molecular information; (c) when using a confocal arrangement with the microscope, in addition to lateral resolution the depth resolution can be enhanced up to the 1 μm level.We applied micro-Raman spectroscopy over the last few years and recently developed a confocal Raman microscopic set-up. Our main application being in the field of polymers, the first thing to worry about is to what happens to the polymer sample when it is irradiated locally with a high laser power density. One should be warned even long before melting in order to avoid morphological changes because, after all, Raman spectroscopy is a powerful tool to study polymer morphology in detail. We use the Stokes/Anti-Stokes intensity ratio for determining the sample temperature.


RSC Advances ◽  
2018 ◽  
Vol 8 (41) ◽  
pp. 23348-23352 ◽  
Author(s):  
Xuan He ◽  
Yu Liu ◽  
Shiliang Huang ◽  
Yi Liu ◽  
Xuemei Pu ◽  
...  

Principal component analysis (PCA) of the data was performed to calculate the characteristic Raman shift region of CL-20, and a new method for the quantitative determination of polymorphic impurities in ε-CL-20 was set up.


2019 ◽  
Vol 955 ◽  
pp. 92-97
Author(s):  
Moritz Elias Strobel ◽  
Milan Kracalik ◽  
Sabine Hild

In this study the curing of an epoxy resin consisted of a diglycidyl ether of bisphenolA (DGEBA) resin and an aromatic Polyamine hardener was monitored combining a Raman-spectrometer and shear rheometry (Rheo-Raman). The set-up allow to carry out curing experiments at various temperatures (100, 120, 140 and 160 °C) where rheological measurements were performed using an oscillation rheometer and a plate-plate geometry while simultaneously Raman spectra were recorded. Raman-spectroscopy allows the determination of the reaction turnover and therefore the degree of cross-linking. Combined with the rheological data obtained, e.g. the gel point and the vitrification point, one can get a better insight in the processes occurring and the influence of different measurement parameters on the obtained rheological properties. Thus, the reaction turnover has been investigated at significant stages of the curing process.


Sign in / Sign up

Export Citation Format

Share Document