scholarly journals A metallic anti-biofouling surface with a hierarchical topography containing nanostructures on curved micro-riblets

2022 ◽  
Vol 8 (1) ◽  
Author(s):  
Taekyung Kim ◽  
Sunmok Kwon ◽  
Jeehyeon Lee ◽  
Joon Sang Lee ◽  
Shinill Kang
Keyword(s):  
Contact Angle ◽  
Hierarchical Structures ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Bacterial Attachment ◽  
Resistance Testing ◽  
Metallic Surface ◽  
Metallic Surfaces ◽  
Hydration Layer ◽  
Surface Finishes

AbstractMetallic surface finishes have been used in the anti-biofouling, but it is very difficult to produce surfaces with hierarchically ordered structures. In the present study, anti-biofouling metallic surfaces with nanostructures superimposed on curved micro-riblets were produced via top-down fabrication. According to the attachment theory, these surfaces feature few attachment points for organisms, the nanostructures prevent the attachment of bacteria and algal zoospores, while the micro-riblets prohibit the settlement of macrofoulers. Anodic oxidation was performed to induce superhydrophilicity. It forms a hydration layer on the surface, which physically blocks foulant adsorption along with the anti-biofouling topography. We characterized the surfaces via scanning electron and atomic force microscopy, contact-angle measurement, and wear-resistance testing. The contact angle of the hierarchical structures was less than 1°. Laboratory settlement assays verified that bacterial attachment was dramatically reduced by the nanostructures and/or the hydration layer, attributable to superhydrophilicity. The micro-riblets prohibited the settlement of macrofoulers. Over 77 days of static immersion in the sea during summer, the metallic surface showed significantly less biofouling compared to a surface painted with an anticorrosive coating.

Contact Angle of Nepenthes alata Slippery Zone: Results from Measurement and Model Analysis

2021 ◽  
pp. 1-7
Author(s):  
Lixin Wang ◽  
Pan Pan ◽  
Shixing Yan ◽  
Shiyun Dong
Keyword(s):  
Contact Angle ◽  
Hierarchical Structures ◽  
Model Analysis ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Structure Characteristic ◽  
Baxter Equation ◽  
Measured Contact Angle ◽  
The Relationship ◽  
Contact Angle Analysis

The slippery zone of Nepenthes alata depends on its highly evolved morphology and structure to show remarkable superhydrophobicity, which has gradually become a biomimetic prototype for developing superhydrophobic materials. However, the mechanism governing this phenomenon has not been fully revealed through model analysis. In this paper, the superhydrophobicity of slippery zone is studied by contact angle measurement, morphology/structure examination and model analysis. The slippery zone causes ultrapure water droplet to produce a considerably high contact angle (155.11–158.30°), and has a micro-nano scale hierarchical structures consisting of lunate cells and wax coverings. According to the Cassie-Baxter equation and a self-defined infiltration coefficient, a model was established to analyze the effect of structure characteristic on the contact angle. Analysis result showed that the calculated contact angle (154.67–159.49°) was highly consistent with the measured contact angle, indicating that the established model can quantitatively characterize the relationship between the contact angle and the structure characteristic. Our study provides some evidences to further reveal the superhydrophobic mechanism of Nepenthes alata slippery zone, as well as inspires the biomimetic development of superhydrophobic surfaces.

SYNTHESIS AND CHARACTERIZATION OF SUPERHYDROPHOBIC ZnO HIERARCHICAL STRUCTURES

NANO ◽  
2011 ◽  
Vol 06 (03) ◽  
pp. 265-269 ◽  
Author(s):  
QUNBING ZHANG ◽  
SHIHE CAO ◽  
JUN WANG
Keyword(s):  
Contact Angle ◽  
Hydrothermal Process ◽  
Hierarchical Structures ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Zno Films ◽  
Water Contact ◽  
Simple Method ◽  
Microscopy Images

ZnO films with well-aligned hierarchical structures have been successfully synthesized at moderate temperatures using a simple catalyst-free hydrothermal process. The synthesized ZnO films are found to be single-phase, with a hexagonal wurtzite-type structure. Scanning electron microscopy images show that the well-aligned hierarchical structures are assembled with interlaced parallel sheets grown on the (400) silica surface. The water contact angle measurement indicates that the water on the films has a contact angle of about 156.3°. This clearly demonstrates that the ZnO films synthesized by this simple method have superhydrophobic properties and may be important for applications in self-cleaning surfaces, biology, and so on.

Surface Roughness and Droplet Contact Angle Measurement of Various Orthodontic Bonding Cements

1993 ◽  
Vol 20 (4) ◽  
pp. 297-305 ◽  
Author(s):  
C. O'Kane ◽  
R. G. Oliver ◽  
R. E. Blunden
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Glass Ionomer Cement ◽  
Surface Characteristics ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Bacterial Attachment ◽  
Before And After ◽  
Orthodontic Bonding

Surface characteristics that are considered important for bacterial attachment to thirteen orthodontic bonding composite cements and one glass ionomer cement were examined in vitro before and after toothbrush abrasion. The surface roughness and contact angle measurements were found to be statistically significantly different between the materials, both before and after brushing, and there were also statistically significant changes within materials after brushing. There were low correlation coefficients between surface roughness and contact angle for both pre-and post-brushed materials.

scholarly journals Superhydrophobic functionalized cellulosic paper by copper hydroxide nanorods for oils purification

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ahmed S. Belal ◽  
Jehan El Nady ◽  
Azza Shokry ◽  
Shaker Ebrahim ◽  
Moataz Soliman ◽  
...  
Keyword(s):  
Contact Angle ◽  
Filter Paper ◽  
Separation Efficiency ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Absorption Capacity ◽  
Morphological Properties ◽  
Copper Hydroxide ◽  
Immersion Method ◽  
Water Contact

AbstractOily water contamination has been sighted as one of the most global environmental pollution. Herein, copper hydroxide nanorods layer was constructed onto cellulosic filter paper surface cured with polydopamine, Ag nanoparticles, and Cu NPs through immersion method. This work has been aimed to produce a superhydrophobic and superoleophilic cellulosic filter paper. The structure, crystalline, and morphological properties of these modified cellulosic filter paper were investigated. Scanning electron microscope images confirmed that the modified surface was rougher compared with the pristine surface. The contact angle measurement confirmed the hydrophobic nature of these modified surfaces with a water contact angle of 169.7°. The absorption capacity was 8.2 g/g for diesel oil and the separation efficiency was higher than 99%. It was noted that the flux in the case of low viscosity solvent as n-hexane was 9663.5 Lm−2 h−1, while for the viscous oil as diesel was 1452.7 Lm−2 h−1.

Preparation and the Blood Compatibility of Titanium Oxide Nanorod Arrays

2011 ◽  
Vol 306-307 ◽  
pp. 25-30 ◽  
Author(s):  
Ping Luo ◽  
Zhan Yun Huang ◽  
Di Hu Chen
Keyword(s):  
Contact Angle ◽  
Surface Morphology ◽  
Titanium Oxide ◽  
Tin Oxide ◽  
Growth Parameters ◽  
Blood Compatibility ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Nanorod Arrays ◽  
Wetting Properties

In this work, titanium oxide nanorod arrays were fabricated by using the hydrothermal method on fluorine-doped tin oxide (FTO) coated glass. The diameter of the nanorods could be controlled from 150 nm to 30 nm by changing the growth parameters. The surface morphology and the structure of the samples were characterized by SEM and XRD. The wetting properties were identified by contact angle measurement. Platelet attachment was investigated to evaluate the blood compatibility of the samples with different nanoscale topographies. Results show that the nanotopographical surfaces perform outstanding blood compatibility, and the adhering platelet decreased with the increasing diameter of the nanorods.

Measurement of wheel-terrain contact angle for WMRs on rough terrain using laser scanning sensor

2017 ◽  
Vol 44 (6) ◽  
pp. 798-807 ◽  
Author(s):  
He Xu ◽  
Yan Xu ◽  
Peiyuan Wang ◽  
Hongpeng Yu ◽  
Ozoemena Anthony Ani ◽  
...  
Keyword(s):  
Contact Angle ◽  
Laser Scanning ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Rough Terrain ◽  
Wheeled Mobile Robots ◽  
Wheel Slip ◽  
Content Type ◽  
Terrain Model ◽  
Measurement Approach

Purpose The purpose of this paper is to explore a novel measurement approach for wheel-terrain contact angle using laser scanning sensors based on near-terrain perception. Laser scanning sensors have rarely been applied to the measurement of wheel-terrain contact angle for wheeled mobile robots (WMRs) in previous studies; however, it is an effective way to measure wheel-terrain contact angle directly with the advantages of simple, fast and high accuracy. Design/methodology/approach First, kinematics model for a WMR moving on rough terrain was developed, taking into consideration wheel slip and wheel-terrain contact angle. Second, the measurement principles of wheel-terrain contact angle using laser scanning sensors was presented, including “rigid wheel - rigid terrain” model and “rigid wheel - deformable terrain” model. Findings In the proposed approach, the measurement of wheel-terrain contact angle using laser scanning sensors was successfully demonstrated. The rationality of the approach was verified by experiments on rigid and sandy terrains with satisfactory results. Originality/value This paper proposes a novel, fast and effective wheel-terrain contact angle measurement approach for WMRs moving on both rigid and deformable terrains, using laser scanning sensors.

Contact angle measurement on rough surfaces

2004 ◽  
Vol 274 (2) ◽  
pp. 637-644 ◽  
Author(s):  
Tammar S. Meiron ◽  
Abraham Marmur ◽  
I.Sam Saguy
Keyword(s):  
Contact Angle ◽  
Rough Surfaces ◽  
Contact Angle Measurement ◽  
Angle Measurement

Curing Time and Water Repellent Properties of Dammar-Titanium Dioxide Thin Film

2015 ◽  
Vol 1112 ◽  
pp. 359-362
Author(s):  
Aisyah Nor Hasnan ◽  
Azizah Hanom Ahmad
Keyword(s):  
Contact Angle ◽  
Titanium Dioxide ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Water Repellent ◽  
Coating System ◽  
Curing Time ◽  
Coating Surface ◽  
Natural Resin ◽  
Before And After

Dammar plant resin is a local natural resin that can be bled from Dipterocaupacea sp of tree. It can be found abundantly in Malaysia’s tropical forest especially in Sarawak. Dammar and Titanium Dioxide was mixed in a various wt% to produce Dammar-modified Titanium Dioxide coating system. The modified coating systems were then spin-coated onto Aluminium Q-panel as the substrate. Coated Q-panels were left to cure at room temperature. The curing time was evaluated using dust free stage. The addition of Titanium Dioxide into the coating system fastens the curing time taken for the coated Q-panel to be cure. It only took about 11-12 minutes to dry compared to the coating system before the addition of Titanium Dioxide where a quite long duration required, 32 minutes. Contact angle measurement was also carried out in order to determine the wettability of the coating system. The surface coated with dammar-modified titanium dioxide found to be hydrophobic where a quite large contact angle obtained for the sample with 3 wt% of Titanium Dioxide (PDT3). The water droplets actually rest on the coating surface without wetting the surface. Water absorption test was done to strengthen the contact angle results where coated substrate was soaked into distilled water for 24 hours and being weighed before and after soaking. The difference of before and after soaking weigh showed that the coating surface does not absorb that much water where only approximately 0.02% of water being absorbed by the coating system for 3 wt%. It proved that the coating systems applied are hydrophobic.

Preparation of TiO2–SiO2 Hybrid Nanosols Coated Flame-Retardant Polyester Fabric Possessing Dual Contradictory Characteristics of Superhydrophobicity and Self Cleaning Ability

2020 ◽  
Vol 20 (3) ◽  
pp. 1780-1789 ◽  
Author(s):  
Priyanka Katiyar ◽  
Shraddha Mishra ◽  
Anurag Srivastava ◽  
N. Eswara Prasad
Keyword(s):  
Electron Microscopy ◽  
Contact Angle ◽  
Flame Retardant ◽  
Protective Clothing ◽  
Sol Gel ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Water Contact ◽  
Vis Spectroscopy ◽  
Self Cleaning

TiO2, SiO2 and their hybrid nanocoatings are prepared on inherent flame retardant textile substrates from titanium(IV)iso-proproxide (TTIP) and tetraethoxysilane (TEOS) precursors using a sol–gel process followed by hydrothermal treatment. The coated samples are further functionalized by hexadecyltrimethoxysilane (HDTMS) to impart superhydrophobicity. Sample characterization of the nanosols, nanoparticles and coated samples are investigated using, X-ray diffractometer, transmission electron microscopy, scanning electron microscopy, UV-Vis spectroscopy, contact angle measurement. Stain degradation test under mild UV irradiation shows almost 54% degradation of coffee stain within 4 hours measured by Spectrophotometer. UV-Vis Absorption Spectroscopy demonstrates complete degradation of methyl orange colorant within 3 hours. Hybrid nanosol coated and HDTMS modified inherent flame retardant polyester surfaces show apparent water contact angle as ~145°, which is much closer to proximity of superhydrophobic surfaces. Thus, the novelty of present work is, by using sol–gel technique, a bi-functional textile surface has been developed which qualifies the very specific requirements of protective clothing like self-cleaning property (imparted by TiO2 nanoparticles) and superhydrophobicity (imparted by SiO2 nanoparticles and further surface modification by HDTMS), which are entirely contradictory in nature, in a single fabric itself. Thus developed textile surfaces also possess the other attributes of protective clothing like flame retardancy and air permeability.

Sign in / Sign up

Export Citation Format

Share Document