scholarly journals Lipodendriplexes mediated enhanced gene delivery: a cellular to pre-clinical investigation

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Imran Tariq ◽  
Muhammad Yasir Ali ◽  
Muhammad Farhan Sohail ◽  
Muhammad Umair Amin ◽  
Sajid Ali ◽  
...  
Keyword(s):  
Cell Culture ◽  
Gene Delivery ◽  
Cell Viability ◽  
3D Cell Culture ◽  
Serum Biochemistry ◽  
Cellular Protein ◽  
Ros Generation ◽  
Gfp Expression

AbstractClinical success of effective gene therapy is mainly hampered by the insufficiency of safe and efficient internalization of a transgene to the targeted cellular site. Therefore, the development of a safe and efficient nanocarrier system is one of the fundamental challenges to transfer the therapeutic genes to the diseased cells. Polyamidoamine (PAMAM) dendrimer has been used as an efficient non-viral gene vector (dendriplexes) but the toxicity and unusual biodistribution induced by the terminal amino groups (–NH2) limit its in vivo applications. Hence, a state of the art lipid modification with PAMAM based gene carrier (lipodendriplexes) was planned to investigate theirs in vitro (2D and 3D cell culture) and in vivo behaviour. In vitro pDNA transfection, lactate dehydrogenase (LDH) release, reactive oxygen species (ROS) generation, cellular protein contents, live/dead staining and apoptosis were studied in 2D cell culture of HEK-293 cells while GFP transfection, 3D cell viability and live/dead staining of spheroids were performed in its 3D cell culture. Acute toxicity studies including organ to body index ratio, hematological parameters, serum biochemistry, histopathological profiles and in vivo transgene expression were assessed in female BALB/c mice. The results suggested that, in comparison to dendriplexes the lipodendriplexes exhibited significant improvement of pDNA transfection (p < 0.001) with lower LDH release (p < 0.01) and ROS generation (p < 0.05). A substantially higher cellular protein content (p < 0.01) and cell viability were also observed in 2D culture. A strong GFP expression with an improved cell viability profile (p < 0.05) was indicated in lipodendriplexes treated 3D spheroids. In vivo archives showed the superiority of lipid-modified nanocarrier system, depicted a significant increase in green fluorescent protein (GFP) expression in the lungs (p < 0.01), heart (p < 0.001), liver (p < 0.001) and kidneys (p < 0.001) with improved serum biochemistry and hematological profile as compared to unmodified dendriplexes. No tissue necrosis was evident in the animal groups treated with lipid-shielded molecules. Therefore, a non-covalent conjugation of lipids with PAMAM based carrier system could be considered as a promising approach for an efficient and biocompatible gene delivery system.

scholarly journals Mammary gland 3D cell culture systems in farm animals

2021 ◽  
Vol 52 (1) ◽  
Author(s):  
Laurence Finot ◽  
Eric Chanat ◽  
Frederic Dessauge
Keyword(s):  
Cell Culture ◽  
Mammary Gland ◽  
Bacterial Infections ◽  
Three Dimensional ◽  
3D Cell Culture ◽  
Farm Animals ◽  
Culture Systems ◽  
Cell Culture Systems

AbstractIn vivo study of tissue or organ biology in mammals is very complex and progress is slowed by poor accessibility of samples and ethical concerns. Fortunately, however, advances in stem cell identification and culture have made it possible to derive in vitro 3D “tissues” called organoids, these three-dimensional structures partly or fully mimicking the in vivo functioning of organs. The mammary gland produces milk, the source of nutrition for newborn mammals. Milk is synthesized and secreted by the differentiated polarized mammary epithelial cells of the gland. Reconstructing in vitro a mammary-like structure mimicking the functional tissue represents a major challenge in mammary gland biology, especially for farm animals for which specific agronomic questions arise. This would greatly facilitate the study of mammary gland development, milk secretion processes and pathological effects of viral or bacterial infections at the cellular level, all with the objective of improving milk production at the animal level. With this aim, various 3D cell culture models have been developed such as mammospheres and, more recently, efforts to develop organoids in vitro have been considerable. Researchers are now starting to draw inspiration from other fields, such as bioengineering, to generate organoids that would be more physiologically relevant. In this chapter, we will discuss 3D cell culture systems as organoids and their relevance for agronomic research.

scholarly journals Self-organization and culture of Mesenchymal Stem Cell spheroids in acoustic levitation

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nathan Jeger-Madiot ◽  
Lousineh Arakelian ◽  
Niclas Setterblad ◽  
Patrick Bruneval ◽  
Mauricio Hoyos ◽  
...  
Keyword(s):  
Cell Culture ◽  
3D Cell Culture ◽  
Culture Conditions ◽  
Acoustic Levitation ◽  
Cell Sheets ◽  
Cell Therapies ◽  
Cellular Models ◽  
Cell Spheroids

AbstractIn recent years, 3D cell culture models such as spheroid or organoid technologies have known important developments. Many studies have shown that 3D cultures exhibit better biomimetic properties compared to 2D cultures. These properties are important for in-vitro modeling systems, as well as for in-vivo cell therapies and tissue engineering approaches. A reliable use of 3D cellular models still requires standardized protocols with well-controlled and reproducible parameters. To address this challenge, a robust and scaffold-free approach is proposed, which relies on multi-trap acoustic levitation. This technology is successfully applied to Mesenchymal Stem Cells (MSCs) maintained in acoustic levitation over a 24-h period. During the culture, MSCs spontaneously self-organized from cell sheets to cell spheroids with a characteristic time of about 10 h. Each acoustofluidic chip could contain up to 30 spheroids in acoustic levitation and four chips could be ran in parallel, leading to the production of 120 spheroids per experiment. Various biological characterizations showed that the cells inside the spheroids were viable, maintained the expression of their cell surface markers and had a higher differentiation capacity compared to standard 2D culture conditions. These results open the path to long-time cell culture in acoustic levitation of cell sheets or spheroids for any type of cells.

Ratiometric Nanoviscometers: Applications for Measuring Cellular Physical Properties in 3D Cultures

2020 ◽  
Vol 25 (3) ◽  
pp. 234-246
Author(s):  
Charles McRae White ◽  
Mark A. Haidekker ◽  
William S. Kisaalita
Keyword(s):  
Cell Culture ◽  
Cell Cultures ◽  
Cell Biology ◽  
Low Cost ◽  
3D Cell Culture ◽  
Biomechanical Properties ◽  
Practical Applications ◽  
3D Cell Cultures

New insights into the biomechanical properties of cells are revealing the importance of these properties and how they relate to underlying molecular, architectural, and behavioral changes associated with cell state and disease processes. However, the current understanding of how these in vitro biomechanical properties are associated with in vivo processes has been developed based on the traditional monolayer (two-dimensional [2D]) cell culture, which traditionally has not translated well to the three-dimensional (3D) cell culture and in vivo function. Many gold standard methods and tools used to observe the biomechanical properties of 2D cell cultures cannot be used with 3D cell cultures. Fluorescent molecules can respond to external factors almost instantaneously and require relatively low-cost instrumentation. In this review, we provide the background on fluorescent molecular rotors, which are attractive tools due to the relationship of their emission quantum yield with environmental microviscosity. We make the case for their use in both 2D and 3D cell cultures and speculate on their fundamental and practical applications in cell biology.

scholarly journals Tailoring 3D cell culture templates with common hydrogels

2018 ◽  
Author(s):  
Aurélien Pasturel ◽  
Pierre-Olivier Strale ◽  
Vincent Studer
Keyword(s):  
Cell Culture ◽  
3D Cell Culture ◽  
In Vitro Models ◽  
Manufacturing Method ◽  
Biologically Relevant ◽  
Physiological Conditions ◽  
Subtractive Manufacturing ◽  
User Friendly

3D cell culture aims at reconciliating the simplicity of in vitro models with the human like properties encountered in vivo. Soft permeable hydrogels have emerged as user-friendly materials to grow cells in more physiological conditions. With the intent on turning these homogeneous substrates into biomimetic templates, we introduce a generic solution compatible with the most biologically relevant and often frail materials. Here we take control of the chemical environment driving generic radical reactions to craft common gels with patterned light. In a simple microreactor, we harness the well-known inhibition of radicals by oxygen to enable topographical photopolymerization. Strikingly, by sustaining an oxygen rich environment, we can also induce hydrogel photo-scission which turns out to be a powerful and generic subtractive manufacturing method. We finally introduce a flexible patterned functionalization protocol based on available photo-linkers. Using these common tools on the most popular hydrogels, we tailored soft templates where cells grow or self-organize into standardized structures. The platform we describe has the potential to set a standard in future 3D cell culture experiments.

scholarly journals A reliable and affordable 3D tumor spheroid model for natural product drug discovery: A case study of curcumin

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Loh Teng Hern Tan ◽  
Liang Ee Low ◽  
Siah Ying Tang ◽  
Wei Hsum Yap ◽  
Lay Hong Chuah ◽  
...  
Keyword(s):  
Cell Culture ◽  
Drug Discovery ◽  
Three Dimensional ◽  
3D Cell Culture ◽  
Automated Image Analysis ◽  
Tumor Spheroids ◽  
Culture Methods ◽  
In Vivo Models

Three-dimensional cell culture methods revolutionize the field of anticancer drug discovery, forming an important link-bridge between conventional in vitro and in vivo models and conferring significant clinical and biological relevant data. The current work presents an affordable yet reproducible method of generating homogenous 3D tumor spheroids. Also, a new open source software is adapted to perform an automated image analysis of 3D tumor spheroids and subsequently generate a list of morphological parameters of which could be utilized to determine the response of these spheroids toward treatments. Our data showed that this work could serve as a reliable 3D cell culture platform for preclinical cytotoxicity testing of natural products prior to the expensive and time-consuming animal models

Application of Three-dimensional (3D) Tumor Cell Culture Systems and Mechanism of Drug Resistance

2019 ◽  
Vol 25 (34) ◽  
pp. 3599-3607 ◽  
Author(s):  
Adeeb Shehzad ◽  
Vijaya Ravinayagam ◽  
Hamad AlRumaih ◽  
Meneerah Aljafary ◽  
Dana Almohazey ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cancer Cells ◽  
Anticancer Drugs ◽  
Three Dimensional ◽  
3D Culture ◽  
3D Cell Culture ◽  
Cancer Therapeutics ◽  
In Vivo Model

: The in-vitro experimental model for the development of cancer therapeutics has always been challenging. Recently, the scientific revolution has improved cell culturing techniques by applying three dimensional (3D) culture system, which provides a similar physiologically relevant in-vivo model for studying various diseases including cancer. In particular, cancer cells exhibiting in-vivo behavior in a model of 3D cell culture is a more accurate cell culture model to test the effectiveness of anticancer drugs or characterization of cancer cells in comparison with two dimensional (2D) monolayer. This study underpins various factors that cause resistance to anticancer drugs in forms of spheroids in 3D in-vitro cell culture and also outlines key challenges and possible solutions for the future development of these systems.

scholarly journals Optimizations of In Vitro Mucus and Cell Culture Models to Better Predict In Vivo Gene Transfer in Pathological Lung Respiratory Airways: Cystic Fibrosis as an Example

Pharmaceutics ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 47
Author(s):  
Rosy Ghanem ◽  
Véronique Laurent ◽  
Philippe Roquefort ◽  
Tanguy Haute ◽  
Sophie Ramel ◽  
...  
Keyword(s):  
Cystic Fibrosis ◽  
Gene Therapy ◽  
Cell Culture ◽  
Gene Transfer ◽  
Gene Delivery ◽  
Culture Models ◽  
Transfer Strategies ◽  
Cell Culture Models

The respiratory epithelium can be affected by many diseases that could be treated using aerosol gene therapy. Among these, cystic fibrosis (CF) is a lethal inherited disease characterized by airways complications, which determine the life expectancy and the effectiveness of aerosolized treatments. Beside evaluations performed under in vivo settings, cell culture models mimicking in vivo pathophysiological conditions can provide complementary insights into the potential of gene transfer strategies. Such models must consider multiple parameters, following the rationale that proper gene transfer evaluations depend on whether they are performed under experimental conditions close to pathophysiological settings. In addition, the mucus layer, which covers the epithelial cells, constitutes a physical barrier for gene delivery, especially in diseases such as CF. Artificial mucus models featuring physical and biological properties similar to CF mucus allow determining the ability of gene transfer systems to effectively reach the underlying epithelium. In this review, we describe mucus and cellular models relevant for CF aerosol gene therapy, with a particular emphasis on mucus rheology. We strongly believe that combining multiple pathophysiological features in single complex cell culture models could help bridge the gaps between in vitro and in vivo settings, as well as viral and non-viral gene delivery strategies.

scholarly journals Testing in vitro toxicity of nanoparticles in 3D cell culture with various extracellular matrix scaffold

2021 ◽  
Author(s):  
Jae Won Choi ◽  
Song-Hwa Bae ◽  
In Young Kim ◽  
Minjeong Kwak ◽  
Tae Geol Lee ◽  
...  
Keyword(s):  
Cell Culture ◽  
3D Cell Culture ◽  
Cancer Cell Line ◽  
Culture Method ◽  
Sio2 Nanoparticles ◽  
Toxicity Assessment ◽  
In Vitro Toxicity ◽  
Dimensional Cell

Nanomaterials are used in a variety of fields and toxicity assessment is paramount for their development and application. Although most toxicity assessments have been performed in 2D (2-Dimensional) cell culture, the inability to adequately replicate the in vivo environment and toxicity is a limitation. To overcome the limitation, a 3D (3-Dimensional) cell culture method has been developed to make an environment closer to an in vivo system. In this study, 20 nm SiO2 nanoparticles were dispersed in serum-containing (SC) and serum-free (SF) media to compare 2D cell culture and 3D cell culture toxicity. The cells were subjected to a 3D cell culture method in which HepG2, a human-derived liver cancer cell line, was mixed on a scaffold. We found that nanoparticles induced toxicity in 2D cell culture, but toxicity was not observed in 3D cell culture similar to in vivo environment. However, differences in toxicity were observed between the three types of scaffolds in the absence of serum as the number of cells decreased.

scholarly journals Polysaccharide-based hydrogels with tunable composition as 3D cell culture systems

2018 ◽  
Vol 41 (4) ◽  
pp. 213-222
Author(s):  
Roberta Gentilini ◽  
Fabiola Munarin ◽  
Nora Bloise ◽  
Eleonora Secchi ◽  
Livia Visai ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cell Viability ◽  
Viscoelastic Properties ◽  
3D Cell Culture ◽  
Promote Cell Proliferation ◽  
Culture Systems ◽  
Weight Variation ◽  
Cell Culture Systems ◽  
Initial Ph

Background: To date, cell cultures have been created either on 2-dimensional (2D) polystyrene surfaces or in 3-dimensional (3D) systems, which do not offer a controlled chemical composition, and which lack the soft environment encountered in vivo and the chemical stimuli that promote cell proliferation and allow complex cellular behavior. In this study, pectin-based hydrogels were developed and are proposed as versatile cell culture systems. Methods: Pectin-based hydrogels were produced by internally crosslinking pectin with calcium carbonate at different initial pH, aiming to control crosslinking kinetics and degree. Additionally, glucose and glutamine were added as additives, and their effects on the viscoelastic properties of the hydrogels and on cell viability were investigated. Results: Pectin hydrogels showed in high cell viability and shear-thinning behavior. Independently of hydrogel composition, an initial swelling was observed, followed by a low percentage of weight variation and a steady-state stage. The addition of glucose and glutamine to pectin-based hydrogels rendered higher cell viability up to 90%-98% after 1 hour of incubation, and these hydrogels were maintained for up to 7 days of culture, yet no effect on viscoelastic properties was detected. Conclusions: Pectin-based hydrogels that offer tunable composition were developed successfully. They are envisioned as synthetic extracellular matrix (ECM) either to study complex cellular behaviors or to be applied as tissue engineering substitutes.

Protective Effect of Schisandrin B Against Cyclosporine A-Induced Nephrotoxicity In Vitro and In Vivo

2012 ◽  
Vol 40 (03) ◽  
pp. 551-566 ◽  
Author(s):  
Shaohua Zhu ◽  
Yan Wang ◽  
Meiwan Chen ◽  
Jing Jin ◽  
Yuwen Qiu ◽  
...  
Keyword(s):  
Cell Viability ◽  
Cyclosporine A ◽  
Tubular Epithelial Cell ◽  
Epithelial Cell Line ◽  
Ros Generation ◽  
Therapeutic Effects ◽  
Schisandrin B ◽  
Protective Effects

Schisandrin B (Sch B) is an active ingredient of the fruit of Schisandra chinensis. It has many therapeutic effects arising from its tonic, sedative, antitussive and antiaging activities and is also used in the treatment of viral and chemical hepatitis. The aim of this study was to investigate the protective effects of Sch B on cyclosporine A (CsA)-induced nephrotoxicity in mice and HK-2 cells (a human proximal tubular epithelial cell line). After gavage with Sch B (20 mg/kg) or olive oil (vehicle), mice received CsA (30 mg/kg) by subcutaneous injection once daily for four weeks. Renal function, histopathology, and tissue glutathione (GSH) and malondialdehyde (MDA) levels were evaluated after the last treatment. The effects of Sch B on CsA–induced oxidative damage in HK-2 cells were investigated by measuring cell viability, the release of lactate dehydrogenase (LDH), the level of reactive oxygen species (ROS), and the cellular GSH and ATP concentrations. Cellular apoptosis was assessed by flow cytometry. Treatment with Sch B in CsA-treated mice significantly suppressed the elevation of blood urea nitrogen (BUN) and serum creatinine levels and attenuated the histopathological changes. Additionally, Sch B also decreased renal MDA levels and increased GSH levels in CsA-treated mice. Using an in vitro model, Sch B (2.5, 5 and 10 μM) significantly increased the cell viability and reduced LDH release and apoptosis induced by CsA (10 μM) in HK-2 cells. Furthermore, Sch B increased the intracellular GSH and ATP levels and attenuated CsA-induced ROS generation. In conclusion, Sch B appears to protect against CsA-induced nephrotoxicity by decreasing oxidative stress and cell death.

Sign in / Sign up

Export Citation Format

Share Document