scholarly journals Tailoring 3D cell culture templates with common hydrogels

2018 ◽  
Author(s):  
Aurélien Pasturel ◽  
Pierre-Olivier Strale ◽  
Vincent Studer
Keyword(s):  
Cell Culture ◽  
3D Cell Culture ◽  
In Vitro Models ◽  
Manufacturing Method ◽  
Biologically Relevant ◽  
Physiological Conditions ◽  
Subtractive Manufacturing ◽  
User Friendly

3D cell culture aims at reconciliating the simplicity of in vitro models with the human like properties encountered in vivo. Soft permeable hydrogels have emerged as user-friendly materials to grow cells in more physiological conditions. With the intent on turning these homogeneous substrates into biomimetic templates, we introduce a generic solution compatible with the most biologically relevant and often frail materials. Here we take control of the chemical environment driving generic radical reactions to craft common gels with patterned light. In a simple microreactor, we harness the well-known inhibition of radicals by oxygen to enable topographical photopolymerization. Strikingly, by sustaining an oxygen rich environment, we can also induce hydrogel photo-scission which turns out to be a powerful and generic subtractive manufacturing method. We finally introduce a flexible patterned functionalization protocol based on available photo-linkers. Using these common tools on the most popular hydrogels, we tailored soft templates where cells grow or self-organize into standardized structures. The platform we describe has the potential to set a standard in future 3D cell culture experiments.

scholarly journals Mammary gland 3D cell culture systems in farm animals

2021 ◽  
Vol 52 (1) ◽  
Author(s):  
Laurence Finot ◽  
Eric Chanat ◽  
Frederic Dessauge
Keyword(s):  
Cell Culture ◽  
Mammary Gland ◽  
Bacterial Infections ◽  
Three Dimensional ◽  
3D Cell Culture ◽  
Farm Animals ◽  
Culture Systems ◽  
Cell Culture Systems

AbstractIn vivo study of tissue or organ biology in mammals is very complex and progress is slowed by poor accessibility of samples and ethical concerns. Fortunately, however, advances in stem cell identification and culture have made it possible to derive in vitro 3D “tissues” called organoids, these three-dimensional structures partly or fully mimicking the in vivo functioning of organs. The mammary gland produces milk, the source of nutrition for newborn mammals. Milk is synthesized and secreted by the differentiated polarized mammary epithelial cells of the gland. Reconstructing in vitro a mammary-like structure mimicking the functional tissue represents a major challenge in mammary gland biology, especially for farm animals for which specific agronomic questions arise. This would greatly facilitate the study of mammary gland development, milk secretion processes and pathological effects of viral or bacterial infections at the cellular level, all with the objective of improving milk production at the animal level. With this aim, various 3D cell culture models have been developed such as mammospheres and, more recently, efforts to develop organoids in vitro have been considerable. Researchers are now starting to draw inspiration from other fields, such as bioengineering, to generate organoids that would be more physiologically relevant. In this chapter, we will discuss 3D cell culture systems as organoids and their relevance for agronomic research.

scholarly journals Self-organization and culture of Mesenchymal Stem Cell spheroids in acoustic levitation

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nathan Jeger-Madiot ◽  
Lousineh Arakelian ◽  
Niclas Setterblad ◽  
Patrick Bruneval ◽  
Mauricio Hoyos ◽  
...  
Keyword(s):  
Cell Culture ◽  
3D Cell Culture ◽  
Culture Conditions ◽  
Acoustic Levitation ◽  
Cell Sheets ◽  
Cell Therapies ◽  
Cellular Models ◽  
Cell Spheroids

AbstractIn recent years, 3D cell culture models such as spheroid or organoid technologies have known important developments. Many studies have shown that 3D cultures exhibit better biomimetic properties compared to 2D cultures. These properties are important for in-vitro modeling systems, as well as for in-vivo cell therapies and tissue engineering approaches. A reliable use of 3D cellular models still requires standardized protocols with well-controlled and reproducible parameters. To address this challenge, a robust and scaffold-free approach is proposed, which relies on multi-trap acoustic levitation. This technology is successfully applied to Mesenchymal Stem Cells (MSCs) maintained in acoustic levitation over a 24-h period. During the culture, MSCs spontaneously self-organized from cell sheets to cell spheroids with a characteristic time of about 10 h. Each acoustofluidic chip could contain up to 30 spheroids in acoustic levitation and four chips could be ran in parallel, leading to the production of 120 spheroids per experiment. Various biological characterizations showed that the cells inside the spheroids were viable, maintained the expression of their cell surface markers and had a higher differentiation capacity compared to standard 2D culture conditions. These results open the path to long-time cell culture in acoustic levitation of cell sheets or spheroids for any type of cells.

scholarly journals Interstitial Flow Recapitulates Gemcitabine Chemoresistance in A 3D Microfluidic Pancreatic Ductal Adenocarcinoma Model by Induction of Multidrug Resistance Proteins

2019 ◽  
Vol 20 (18) ◽  
pp. 4647 ◽  
Author(s):  
Bart Kramer ◽  
Luuk de Haan ◽  
Marjolein Vermeer ◽  
Thomas Olivier ◽  
Thomas Hankemeier ◽  
...  
Keyword(s):  
Cell Culture ◽  
Multidrug Resistance ◽  
Pancreatic Ductal Adenocarcinoma ◽  
3D Cell Culture ◽  
In Vitro Models ◽  
Ductal Adenocarcinoma ◽  
Interstitial Flow ◽  
Multidrug Resistance Proteins ◽  
And Function

Pancreatic Ductal Adenocarcinoma (PDAC) is one of the most lethal cancers due to a high chemoresistance and poor vascularization, which results in an ineffective systemic therapy. PDAC is characterized by a high intratumoral pressure, which is not captured by current 2D and 3D in vitro models. Here, we demonstrated a 3D microfluidic interstitial flow model to mimic the intratumoral pressure in PDAC. We found that subjecting the S2-028 PDAC cell line to interstitial flow inhibits the proliferation, while maintaining a high viability. We observed increased gemcitabine chemoresistance, with an almost nine-fold higher EC50 as compared to a monolayer culture (31 nM versus 277 nM), and an alleviated expression and function of the multidrug resistance protein (MRP) family. In conclusion, we developed a 3D cell culture modality for studying intratissue pressure and flow that exhibits more predictive capabilities than conventional 2D cell culture and is less time-consuming, and more scalable and accessible than animal models. This increase in microphysiological relevance might support improved efficiency in the drug development pipeline.

Ratiometric Nanoviscometers: Applications for Measuring Cellular Physical Properties in 3D Cultures

2020 ◽  
Vol 25 (3) ◽  
pp. 234-246
Author(s):  
Charles McRae White ◽  
Mark A. Haidekker ◽  
William S. Kisaalita
Keyword(s):  
Cell Culture ◽  
Cell Cultures ◽  
Cell Biology ◽  
Low Cost ◽  
3D Cell Culture ◽  
Biomechanical Properties ◽  
Practical Applications ◽  
3D Cell Cultures

New insights into the biomechanical properties of cells are revealing the importance of these properties and how they relate to underlying molecular, architectural, and behavioral changes associated with cell state and disease processes. However, the current understanding of how these in vitro biomechanical properties are associated with in vivo processes has been developed based on the traditional monolayer (two-dimensional [2D]) cell culture, which traditionally has not translated well to the three-dimensional (3D) cell culture and in vivo function. Many gold standard methods and tools used to observe the biomechanical properties of 2D cell cultures cannot be used with 3D cell cultures. Fluorescent molecules can respond to external factors almost instantaneously and require relatively low-cost instrumentation. In this review, we provide the background on fluorescent molecular rotors, which are attractive tools due to the relationship of their emission quantum yield with environmental microviscosity. We make the case for their use in both 2D and 3D cell cultures and speculate on their fundamental and practical applications in cell biology.

scholarly journals Lipodendriplexes mediated enhanced gene delivery: a cellular to pre-clinical investigation

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Imran Tariq ◽  
Muhammad Yasir Ali ◽  
Muhammad Farhan Sohail ◽  
Muhammad Umair Amin ◽  
Sajid Ali ◽  
...  
Keyword(s):  
Cell Culture ◽  
Gene Delivery ◽  
Cell Viability ◽  
3D Cell Culture ◽  
Serum Biochemistry ◽  
Cellular Protein ◽  
Ros Generation ◽  
Gfp Expression

AbstractClinical success of effective gene therapy is mainly hampered by the insufficiency of safe and efficient internalization of a transgene to the targeted cellular site. Therefore, the development of a safe and efficient nanocarrier system is one of the fundamental challenges to transfer the therapeutic genes to the diseased cells. Polyamidoamine (PAMAM) dendrimer has been used as an efficient non-viral gene vector (dendriplexes) but the toxicity and unusual biodistribution induced by the terminal amino groups (–NH2) limit its in vivo applications. Hence, a state of the art lipid modification with PAMAM based gene carrier (lipodendriplexes) was planned to investigate theirs in vitro (2D and 3D cell culture) and in vivo behaviour. In vitro pDNA transfection, lactate dehydrogenase (LDH) release, reactive oxygen species (ROS) generation, cellular protein contents, live/dead staining and apoptosis were studied in 2D cell culture of HEK-293 cells while GFP transfection, 3D cell viability and live/dead staining of spheroids were performed in its 3D cell culture. Acute toxicity studies including organ to body index ratio, hematological parameters, serum biochemistry, histopathological profiles and in vivo transgene expression were assessed in female BALB/c mice. The results suggested that, in comparison to dendriplexes the lipodendriplexes exhibited significant improvement of pDNA transfection (p < 0.001) with lower LDH release (p < 0.01) and ROS generation (p < 0.05). A substantially higher cellular protein content (p < 0.01) and cell viability were also observed in 2D culture. A strong GFP expression with an improved cell viability profile (p < 0.05) was indicated in lipodendriplexes treated 3D spheroids. In vivo archives showed the superiority of lipid-modified nanocarrier system, depicted a significant increase in green fluorescent protein (GFP) expression in the lungs (p < 0.01), heart (p < 0.001), liver (p < 0.001) and kidneys (p < 0.001) with improved serum biochemistry and hematological profile as compared to unmodified dendriplexes. No tissue necrosis was evident in the animal groups treated with lipid-shielded molecules. Therefore, a non-covalent conjugation of lipids with PAMAM based carrier system could be considered as a promising approach for an efficient and biocompatible gene delivery system.

scholarly journals A reliable and affordable 3D tumor spheroid model for natural product drug discovery: A case study of curcumin

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Loh Teng Hern Tan ◽  
Liang Ee Low ◽  
Siah Ying Tang ◽  
Wei Hsum Yap ◽  
Lay Hong Chuah ◽  
...  
Keyword(s):  
Cell Culture ◽  
Drug Discovery ◽  
Three Dimensional ◽  
3D Cell Culture ◽  
Automated Image Analysis ◽  
Tumor Spheroids ◽  
Culture Methods ◽  
In Vivo Models

Three-dimensional cell culture methods revolutionize the field of anticancer drug discovery, forming an important link-bridge between conventional in vitro and in vivo models and conferring significant clinical and biological relevant data. The current work presents an affordable yet reproducible method of generating homogenous 3D tumor spheroids. Also, a new open source software is adapted to perform an automated image analysis of 3D tumor spheroids and subsequently generate a list of morphological parameters of which could be utilized to determine the response of these spheroids toward treatments. Our data showed that this work could serve as a reliable 3D cell culture platform for preclinical cytotoxicity testing of natural products prior to the expensive and time-consuming animal models

Application of Three-dimensional (3D) Tumor Cell Culture Systems and Mechanism of Drug Resistance

2019 ◽  
Vol 25 (34) ◽  
pp. 3599-3607 ◽  
Author(s):  
Adeeb Shehzad ◽  
Vijaya Ravinayagam ◽  
Hamad AlRumaih ◽  
Meneerah Aljafary ◽  
Dana Almohazey ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cancer Cells ◽  
Anticancer Drugs ◽  
Three Dimensional ◽  
3D Culture ◽  
3D Cell Culture ◽  
Cancer Therapeutics ◽  
In Vivo Model

: The in-vitro experimental model for the development of cancer therapeutics has always been challenging. Recently, the scientific revolution has improved cell culturing techniques by applying three dimensional (3D) culture system, which provides a similar physiologically relevant in-vivo model for studying various diseases including cancer. In particular, cancer cells exhibiting in-vivo behavior in a model of 3D cell culture is a more accurate cell culture model to test the effectiveness of anticancer drugs or characterization of cancer cells in comparison with two dimensional (2D) monolayer. This study underpins various factors that cause resistance to anticancer drugs in forms of spheroids in 3D in-vitro cell culture and also outlines key challenges and possible solutions for the future development of these systems.

scholarly journals A Simple Aspect Ratio Dependent Method of Patterning Microwells for Selective Cell Attachment

2018 ◽  
Author(s):  
Erik A. Zavrel ◽  
Michael L. Shuler ◽  
Xiling Shen
Keyword(s):  
Cell Culture ◽  
Cell Attachment ◽  
In Vitro Models ◽  
Contact Printing ◽  
Deep Well ◽  
Biomimetic Approach ◽  
Authentic Environment ◽  
And Control

3-D culture has been shown to provide cells with a more physiologically authentic environment than traditional 2-D (planar) culture [1, 2]. 3-D cues allow cells to exhibit more realistic functions and behaviors, e.g., adhesion, spreading, migration, metabolic activity, and differentiation. Knowledge of changes in cell morphology, mechanics, and mobility in response to geometrical cues and topological stimuli is important for understanding normal and pathological cell development [3]. Microfabrication provides unique in vitro approaches to recapitulating in vivo conditions due to the ability to precisely control the cellular microenvironment [4, 5]. Microwell arrays have emerged as robust alternatives to traditional 2D cell culture substrates as they are relatively simple and compatible with existing laboratory techniques and instrumentation [6, 7]. In particular, microwells have been adopted as a biomimetic approach to modeling the unique micro-architecture of the epithelial lining of the gastrointestinal (GI) tract [8–10]. The inner (lumen-facing) surface of the intestine has a convoluted topography consisting of finger-like projections (villi) with deep well-like invaginations (crypts) between them. The dimensions of villi and crypts are on the order of hundreds of microns (100–700 μm in height and 50–250 μm in diameter) [11]. While microwells have proven important in the development of physiologically realistic in vitro models of human intestine, existing methods of ensuring their surface is suitable for cell culture are lacking. Sometimes it is desirable to selectively seed cells within microwells and confine or restrict them to the microwells in which they are seeded. Existing methods of patterning microwells for cell attachment either lack selectivity, meaning cells can adhere and migrate anywhere on the microwell array, i.e., inside microwells or outside of them, or necessitate sophisticated techniques such as micro-contact printing, which requires precise alignment and control to selectively pattern the bottoms of microwells for cell attachment [12, 13].

scholarly journals Breaking the Third Wall: Implementing 3D-Printing Technics to Expand the Complexity and Abilities of Multi-Organ-on-a-Chip Devices

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 627
Author(s):  
Yoel Goldstein ◽  
Sarah Spitz ◽  
Keren Turjeman ◽  
Florian Selinger ◽  
Yechezkel Barenholz ◽  
...  
Keyword(s):  
Cell Culture ◽  
Cfd Simulation ◽  
Cost Effective ◽  
In Vitro Models ◽  
3D Print ◽  
Biological Compatibility ◽  
3D Printed ◽  
Organ On A Chip

The understanding that systemic context and tissue crosstalk are essential keys for bridging the gap between in vitro models and in vivo conditions led to a growing effort in the last decade to develop advanced multi-organ-on-a-chip devices. However, many of the proposed devices have failed to implement the means to allow for conditions tailored to each organ individually, a crucial aspect in cell functionality. Here, we present two 3D-print-based fabrication methods for a generic multi-organ-on-a-chip device: One with a PDMS microfluidic core unit and one based on 3D-printed units. The device was designed for culturing different tissues in separate compartments by integrating individual pairs of inlets and outlets, thus enabling tissue-specific perfusion rates that facilitate the generation of individual tissue-adapted perfusion profiles. The device allowed tissue crosstalk using microchannel configuration and permeable membranes used as barriers between individual cell culture compartments. Computational fluid dynamics (CFD) simulation confirmed the capability to generate significant differences in shear stress between the two individual culture compartments, each with a selective shear force. In addition, we provide preliminary findings that indicate the feasibility for biological compatibility for cell culture and long-term incubation in 3D-printed wells. Finally, we offer a cost-effective, accessible protocol enabling the design and fabrication of advanced multi-organ-on-a-chip devices.

scholarly journals 3D Modeling of Epithelial Tumors—The Synergy between Materials Engineering, 3D Bioprinting, High-Content Imaging, and Nanotechnology

2021 ◽  
Vol 22 (12) ◽  
pp. 6225
Author(s):  
Poonam Trivedi ◽  
Rui Liu ◽  
Hongjie Bi ◽  
Chunlin Xu ◽  
Jessica M. Rosenholm ◽  
...  
Keyword(s):  
Cell Culture ◽  
Treatment Strategies ◽  
3D Cell Culture ◽  
Drug Efficacy ◽  
In Vitro Models ◽  
Experimental Models ◽  
Epithelial Cancer ◽  
High Content Imaging ◽  
Novel Technologies

The current statistics on cancer show that 90% of all human cancers originate from epithelial cells. Breast and prostate cancer are examples of common tumors of epithelial origin that would benefit from improved drug treatment strategies. About 90% of preclinically approved drugs fail in clinical trials, partially due to the use of too simplified in vitro models and a lack of mimicking the tumor microenvironment in drug efficacy testing. This review focuses on the origin and mechanism of epithelial cancers, followed by experimental models designed to recapitulate the epithelial cancer structure and microenvironment, such as 2D and 3D cell culture models and animal models. A specific focus is put on novel technologies for cell culture of spheroids, organoids, and 3D-printed tissue-like models utilizing biomaterials of natural or synthetic origins. Further emphasis is laid on high-content imaging technologies that are used in the field to visualize in vitro models and their morphology. The associated technological advancements and challenges are also discussed. Finally, the review gives an insight into the potential of exploiting nanotechnological approaches in epithelial cancer research both as tools in tumor modeling and how they can be utilized for the development of nanotherapeutics.

Sign in / Sign up

Export Citation Format

Share Document