scholarly journals Bilayer ventilated labyrinthine metasurfaces with high sound absorption and tunable bandwidth

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiayuan Du ◽  
Yuezhou Luo ◽  
Xinyu Zhao ◽  
Xiaodong Sun ◽  
Yanan Song ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Air Flow ◽  
Single Layer ◽  
Sound Waves ◽  
Acoustic Metamaterials ◽  
Sound Barrier ◽  
Free Air ◽  
Relative Bandwidth ◽  
Wide Range ◽  
High Sound

AbstractThe recent advent of acoustic metamaterials offers unprecedented opportunities for sound controlling in various occasions, whereas it remains a challenge to attain broadband high sound absorption and free air flow simultaneously. Here, we demonstrated, both theoretically and experimentally, that this problem can be overcome by using a bilayer ventilated labyrinthine metasurface. By altering the spacing between two constituent single-layer metasurfaces and adopting asymmetric losses in them, near-perfect (98.6%) absorption is achieved at resonant frequency for sound waves incident from the front. The relative bandwidth of absorption peak can be tuned in a wide range (from 12% to 80%) by adjusting the open area ratio of the structure. For sound waves from the back, the bilayer metasurface still serves as a sound barrier with low transmission. Our results present a strategy to realize high sound absorption and free air flow simultaneously, and could find applications in building acoustics and noise remediation.

scholarly journals Bilayer ventilated labyrinthine metasurfaces with high sound absorption and tunable bandwidth

2020 ◽  
Author(s):  
Jiayuan Du ◽  
Yuezhou Luo ◽  
Xinyu Zhao ◽  
Xiaodong Sun ◽  
Yanan Song ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Air Flow ◽  
Single Layer ◽  
Sound Waves ◽  
Acoustic Metamaterials ◽  
Sound Barrier ◽  
Free Air ◽  
Relative Bandwidth ◽  
Wide Range ◽  
High Sound

Abstract The recent advent of acoustic metamaterials offers unprecedented opportunities for sound controlling in various occasions, whereas it remains a challenge to attain broadband high sound absorption and free air flow simultaneously. Here, we demonstrated, both theoretically and experimentally, that this problem can be overcome by using a bilayer ventilated labyrinthine metasurface. By altering the spacing between two constituent single-layer metasurfaces and adopting asymmetric losses in them, near-perfect (98.6%) absorption is achieved at resonant frequency for sound waves incident from the front. The relative bandwidth of absorption peak can be tuned in a wide range (from 12% to 80%) by adjusting the open area ratio of the structure. For sound waves from the back, the bilayer metasurface still serves as a sound barrier with low transmission. Our results present a strategy to realize high sound absorption and free air flow simultaneously, and could find applications in building acoustics and noise remediation.

scholarly journals Bilayer Ventilated Labyrinthine Metasurfaces With High Sound Absorption and Tunable Bandwidth

2021 ◽  
Author(s):  
Jiayuan Du ◽  
Yuezhou Luo ◽  
Xinyu Zhao ◽  
Xiaodong Sun ◽  
Yanan Song ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Air Flow ◽  
Single Layer ◽  
Sound Waves ◽  
Acoustic Metamaterials ◽  
Sound Barrier ◽  
Free Air ◽  
Relative Bandwidth ◽  
Wide Range ◽  
High Sound

Abstract The recent advent of acoustic metamaterials offers unprecedented opportunities for sound controlling in various occasions, whereas it remains a challenge to attain broadband high sound absorption and free air flow simultaneously. Here, we demonstrated, both theoretically and experimentally, that this problem can be overcome by using a bilayer ventilated labyrinthine metasurface. By altering the spacing between two constituent single-layer metasurfaces and adopting asymmetric losses in them, near-perfect (98.6%) absorption is achieved at resonant frequency for sound waves incident from the front. The relative bandwidth of absorption peak can be tuned in a wide range (from 12% to 80%) byadjusting the open area ratio of the structure. For sound waves from the back, the bilayer metasurface still serves as a sound barrier with low transmission. Our results present a strategy to realize high sound absorption and free air flow simultaneously, and could find applications in building acoustics and noise remediation.

scholarly journals A Composite Perforated Partitioned Sandwich Panel With Corrugation for Underwater Low-Frequency Sound Absorption

2021 ◽  
Vol 7 ◽  
Author(s):  
Junyi Wang ◽  
Jiaming Hu ◽  
Yun Chen
Keyword(s):  
Acoustic Wave ◽  
Composite Structure ◽  
Sound Absorption ◽  
Low Frequency ◽  
Propagation Loss ◽  
Sound Waves ◽  
Acoustic Metamaterials ◽  
Underwater Sound ◽  
Underwater Acoustic ◽  
Frequency Sound

Underwater acoustic wave absorption and control play an important role in underwater applications. Various types of underwater acoustic metamaterials have been proposed in recent years with the vigorous development of acoustic metamaterials. Compared with airborne sound, underwater sound waves have a longer wavelength and much smaller propagation loss, making them more difficult to control. In addition, given that the acoustic impedance of water is much greater than that of air, numerous conventional materials and structures are not suited to underwater use. In this paper, we propose a composite structure based on an excellent broadband low-frequency sound absorber of air using aluminum mixed with rubber. Our composite structure possesses broadband low-frequency (<1,000 Hz) sound absorption underwater, omnidirectional high sound absorption coefficient under the oblique incidence (0–75°), and pressure resistance. It has promising applications for underwater acoustic wave control and contributes to the design of underwater acoustic metamaterials.

scholarly journals A new simple method for determining the sound absorption coefficient

2018 ◽  
Vol 211 ◽  
pp. 04003
Author(s):  
Merab Chelidze
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Sound Propagation ◽  
Sound Absorption Coefficient ◽  
Measuring Instruments ◽  
Sound Waves ◽  
Simple Method ◽  
Impedance Tube ◽  
Wide Range ◽  
Low Sensitivity

Taking into account the influence of the length and diameter of the impedance tube on the process of decay of sound waves, a new study of sound propagation in an impedance tube is presented, on the basis of which it is easier to determine the sound absorption coefficient. The new simple method of determining the absorption coefficient, based on the decay of reverberating waves, is fairly stable and demonstrates a low sensitivity for all errors made in the measurement. The presented method makes it possible to measure the sound absorption coefficient without laboratories and precision measuring instruments in a wide range at the level of separate consumers.

scholarly journals Design, Manufacturing, and Acoustical Analysis of a Helmholtz Resonator-Based Metamaterial Plate

Acoustics ◽  
2021 ◽  
Vol 3 (4) ◽  
pp. 630-641
Author(s):  
Sourabh Dogra ◽  
Arpan Gupta
Keyword(s):  
Transmission Loss ◽  
Sound Transmission ◽  
Helmholtz Resonator ◽  
Acoustic Properties ◽  
Sound Transmission Loss ◽  
Sound Waves ◽  
Acoustic Metamaterials ◽  
Additional Advantage ◽  
Helmholtz Resonators ◽  
High Sound

Acoustic metamaterials are materials artificially engineered to control sound waves, which is not possible with conventional materials. We have proposed a design of an acoustic metamaterial plate with inbuilt Helmholtz resonators. The plate is made of Polylactic acid (PLA) which is fabricated using an additive manufacturing technique. It consists of Helmholtz resonator-shaped cavities of different sizes. In this paper, we have analyzed the acoustic properties of the Helmholtz resonators-based metamaterial plate experimentally as well as numerically. The experimental results are in good agreement with the numerical results. These types of 3D-printed metamaterial plates can find their application where high sound transmission loss is required to create a quieter ambience. There is an additional advantage of being lightweight because of the Helmholtz resonator-shaped cavities built inside the plate. Thus, these types of metamaterial plates can find their application in the design sector requiring lighter materials with high sound transmission loss.

URBAN FACADE GEOMETRY ON OUTDOOR COMFORT CONDITIONS: A REVIEW

2020 ◽  
Vol 4 (1) ◽  
pp. 45
Author(s):  
Elahe Mirabi ◽  
Nasrollahi Nazanin
Keyword(s):  
Thermal Comfort ◽  
Urban Areas ◽  
Natural Ventilation ◽  
Flow Behavior ◽  
Air Flow ◽  
Urban Geometry ◽  
Wide Range ◽  
Low Energy Buildings ◽  
Outdoor Comfort ◽  
Solar Access

<p>Designing urban facades is considered as a major factor influencing issues<br />such as natural ventilation of buildings and urban areas, radiations in the<br />urban canyon for designing low-energy buildings, cooling demand for<br />buildings in urban area, and thermal comfort in urban streets. However, so<br />far, most studies on urban topics have been focused on flat facades<br />without details of urban layouts. Hence, the effect of urban facades with<br />details such as the balcony and corbelling on thermal comfort conditions<br />and air flow behavior are discussed in this literature review. <strong>Aim</strong>: This<br />study was carried out to investigate the effective factors of urban facades,<br />including the effects of building configuration, geometry and urban<br />canyon’s orientation. <strong>Methodology and Results</strong>: According to the results,<br />the air flow behavior is affected by a wide range of factors such as wind<br />conditions, urban geometry and wind direction. Urban façade geometry<br />can change outdoor air flow pattern, thermal comfort and solar access.<br /><strong>Conclusion, significance and impact study</strong>: In particular, the geometry of<br />the facade, such as indentation and protrusion, has a significant effect on<br />the air flow and thermal behavior in urban facades and can enhance<br />outdoor comfort conditions. Also, Alternation in façade geometry can<br />affect pedestrians' comfort and buildings energy demands.</p>

Ab initio calculation on the Optical Properties of AA- Stacked two dimensional Graphene, Silicene, Germanene, and Stanene

2018 ◽  
Vol 1 (1) ◽  
pp. 46-50
Author(s):  
Rita John ◽  
Benita Merlin
Keyword(s):  
Optical Properties ◽  
Band Structure ◽  
Density Functional ◽  
Electronic Band Structure ◽  
Complex Refractive Index ◽  
Single Layer ◽  
Generalized Gradient ◽  
Electronic Band ◽  
Wide Range ◽  
Optical Region

In this study, we have analyzed the electronic band structure and optical properties of AA-stacked bilayer graphene and its 2D analogues and compared the results with single layers. The calculations have been done using Density Functional Theory with Generalized Gradient Approximation as exchange correlation potential as in CASTEP. The study on electronic band structure shows the splitting of valence and conduction bands. A band gap of 0.342eV in graphene and an infinitesimally small gap in other 2D materials are generated. Similar to a single layer, AA-stacked bilayer materials also exhibit excellent optical properties throughout the optical region from infrared to ultraviolet. Optical properties are studied along both parallel (||) and perpendicular ( ) polarization directions. The complex dielectric function (ε) and the complex refractive index (N) are calculated. The calculated values of ε and N enable us to analyze optical absorption, reflectivity, conductivity, and the electron loss function. Inferences from the study of optical properties are presented. In general the optical properties are found to be enhanced compared to its corresponding single layer. The further study brings out greater inferences towards their direct application in the optical industry through a wide range of the optical spectrum.

Nitrogen Removal from Anaerobically-Treated Leachate

1984 ◽  
Vol 19 (1) ◽  
pp. 87-100
Author(s):  
D. Prasad ◽  
J.G. Henry ◽  
P. Elefsiniotis
Keyword(s):  
Nitrogen Removal ◽  
Air Flow ◽  
Operating Conditions ◽  
Air Flow Rate ◽  
Flow Rates ◽  
Anaerobic Filter ◽  
Ph Values ◽  
Wide Range ◽  
Ammonia Desorption ◽  
Effects Of Ph

Abstract Laboratory studies were conducted to demonstrate the effectiveness of diffused aeration for the removal of ammonia from the effluent of an anaerobic filter treating leachate. The effects of pH, temperature and air flow on the process were studied. The coefficient of desorption of ammonia, KD for the anaerobic filter effluent (TKN 75 mg/L with NH3-N 88%) was determined at pH values of 9, 10 and 11, temperatures of 10, 15, 20, 30 and 35°C, and air flow rates of 50, 120, and 190 cm3/sec/L. Results indicated that nitrogen removal from the effluent of anaerobic filters by ammonia desorption was feasible. Removals exceeding 90% were obtained with 8 hours aeration at pH of 10, a temperature of 20°C, and an air flow rate of 190 cm3/sec/L. Ammonia desorption coefficients, KD, determined at other temperatures and air flow rates can be used to predict ammonia removals under a wide range of operating conditions.

scholarly journals Factors Affecting Acoustic Properties of Natural-Fiber-Based Materials and Composites: A Review

Textiles ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 55-85
Author(s):  
Tufail Hassan ◽  
Hafsa Jamshaid ◽  
Rajesh Mishra ◽  
Muhammad Qamar Khan ◽  
Michal Petru ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Fiber Type ◽  
Alkali Treatment ◽  
Acoustic Properties ◽  
Synthetic Fiber ◽  
Sound Insulation ◽  
Factors Affecting ◽  
Wide Range

Recently, very rapid growth has been observed in the innovations and use of natural-fiber-based materials and composites for acoustic applications due to their environmentally friendly nature, low cost, and good acoustic absorption capability. However, there are still challenges for researchers to improve the mechanical and acoustic properties of natural fiber composites. In contrast, synthetic fiber-based composites have good mechanical properties and can be used in a wide range of structural and automotive applications. This review aims to provide a short overview of the different factors that affect the acoustic properties of natural-fiber-based materials and composites. The various factors that influence acoustic performance are fiber type, fineness, length, orientation, density, volume fraction in the composite, thickness, level of compression, and design. The details of various factors affecting the acoustic behavior of the fiber-based composites are described. Natural-fiber-based composites exhibit relatively good sound absorption capability due to their porous structure. Surface modification by alkali treatment can enhance the sound absorption performance. These materials can be used in buildings and interiors for efficient sound insulation.

Respiratory Mechanics of Sound Production in Chickens and Geese

1978 ◽  
Vol 72 (1) ◽  
pp. 229-250
Author(s):  
J. H. BRACKENBURY
Keyword(s):  
Respiratory System ◽  
Simultaneous Measurement ◽  
Sound Production ◽  
High Pressures ◽  
Respiratory Mechanics ◽  
Air Flow ◽  
Tracheal Pressure ◽  
Wide Range ◽  
Range Of Values ◽  
Respiratory Movements

1. Air flow, air sac pressure and tracheal pressure were measured in chickens and geese during a variety of different vocal and non-vocal activities. 2. Air flow and air sac pressure may rise to 500 ml s−1 and 60 cmH2O (6 103 N/m2) respectively during a crow in the chicken. During a sequence of honks in the goose the corresponding values are 650 ml s−1 and 25 cmH2O(2.5 × 10 3 N/m2) respectively. 3. The volume of air delivered through the respiratory system during a single crow is more than 400 ml, almost equivalent to the total volume of the lung air sac system. 4. The efficiency of the chicken syrinx as a sound producing instrument, estimated by comparing the sound energy radiated with the energy consumed in the expulsion of air during a crow, appears to be less than 2 %. 5. Cutting the paired sternotrachealis muscles had no effect on vocalization. 6. The measured rates of clucking, cheeping and honking in adult chickens, young chicks and adult geese respectively are comparable to the characteristic rates of panting in these animals. This points to a similarity in the nature of the respiratory movements involved in each case. 7. Simultaneous measurement of tracheal flow and pressure indicate that the glottis is capable of controlling air flow over a wide range of values in the presence of high pressures. During defaecation the valve is closed whilst during coughing it is wide open.

Sign in / Sign up

Export Citation Format

Share Document