Respiratory Mechanics of Sound Production in Chickens and Geese

1978 ◽  
Vol 72 (1) ◽  
pp. 229-250
Author(s):  
J. H. BRACKENBURY
Keyword(s):  
Respiratory System ◽  
Simultaneous Measurement ◽  
Sound Production ◽  
High Pressures ◽  
Respiratory Mechanics ◽  
Air Flow ◽  
Tracheal Pressure ◽  
Wide Range ◽  
Range Of Values ◽  
Respiratory Movements

1. Air flow, air sac pressure and tracheal pressure were measured in chickens and geese during a variety of different vocal and non-vocal activities. 2. Air flow and air sac pressure may rise to 500 ml s−1 and 60 cmH2O (6 103 N/m2) respectively during a crow in the chicken. During a sequence of honks in the goose the corresponding values are 650 ml s−1 and 25 cmH2O(2.5 × 10 3 N/m2) respectively. 3. The volume of air delivered through the respiratory system during a single crow is more than 400 ml, almost equivalent to the total volume of the lung air sac system. 4. The efficiency of the chicken syrinx as a sound producing instrument, estimated by comparing the sound energy radiated with the energy consumed in the expulsion of air during a crow, appears to be less than 2 %. 5. Cutting the paired sternotrachealis muscles had no effect on vocalization. 6. The measured rates of clucking, cheeping and honking in adult chickens, young chicks and adult geese respectively are comparable to the characteristic rates of panting in these animals. This points to a similarity in the nature of the respiratory movements involved in each case. 7. Simultaneous measurement of tracheal flow and pressure indicate that the glottis is capable of controlling air flow over a wide range of values in the presence of high pressures. During defaecation the valve is closed whilst during coughing it is wide open.

Single-breath method for measurement of respiratory mechanics in anesthetized animals

1982 ◽  
Vol 52 (5) ◽  
pp. 1266-1271 ◽  
Author(s):  
W. A. Zin ◽  
L. D. Pengelly ◽  
J. Milic-Emili
Keyword(s):  
Respiratory System ◽  
Flow Resistance ◽  
Respiratory Mechanics ◽  
Respiratory Muscles ◽  
Volume Flow ◽  
Single Breath ◽  
Inspiratory Muscles ◽  
Tracheal Pressure ◽  
Spontaneously Breathing ◽  
Single Breath Method

In six spontaneously breathing anesthetized cats (pentobarbital sodium, 35 mg/kg ip) airflow, changes in lung volume and tracheal pressure were measured. The airways were occluded at end inspiration (VT). During the ensuing period of apnea (Breuer-Hering inflation reflex), the animal relaxed the respiratory muscles and the passive compliance of the respiratory system (Crs) was computed by dividing VT by the tracheal pressure. While the animal was still relaxed, the airways were reopened, and during the ensuing relaxed expiration the volume-flow relationship was linear, the slope representing the time constant of the respiratory system: tau rs = Crs . Rrs, where Rrs is the flow resistance of the passive respiratory system. From the measured values of tau rs and Crs, Rrs was computed. With this information it was also possible to quantitate the antagonistic pressure developed by the inspiratory muscles during spontaneous expiration.

Interrupter technique for measurement of respiratory mechanics in anesthetized humans

1985 ◽  
Vol 59 (2) ◽  
pp. 647-652 ◽  
Author(s):  
S. B. Gottfried ◽  
B. D. Higgs ◽  
A. Rossi ◽  
F. Carli ◽  
P. M. Mengeot ◽  
...  
Keyword(s):  
Respiratory System ◽  
Respiratory Muscle ◽  
Respiratory Mechanics ◽  
Muscle Relaxation ◽  
Total System ◽  
Single Breath ◽  
Inspiratory Muscles ◽  
Tracheal Pressure ◽  
Respiratory System Resistance ◽  
Relationship Of

Flow (V), volume (V), and tracheal pressure (Ptr) were measured throughout a series of brief (100 ms) interruptions of expiratory V in six patients during anesthesia (halothane-N2O) and anesthesia-paralysis (succinylcholine). For the latter part of spontaneous expiration and throughout passive deflation during muscle paralysis, a plateau in postinterruption Ptr was observed, indicating respiratory muscle relaxation. Under these conditions, passive elastance of the total respiratory system (Ers) was determined as the plateau in postinterruption Ptr divided by the corresponding V. The pressure-flow relationship of the total system was determined by plotting the plateau in Ptr during interruption against the immediately preceding V. Ers averaged 23.5 +/- 1.9 (SD) cmH2O X l-1 during anesthesia and 25.5 +/- 5.4 cmH2O X l-1 during anesthesia-paralysis. Corresponding values of total respiratory system resistance were 2.0 +/- 0.8 and 1.9 +/- 0.6 cmH2O X l-1 X s, respectively. Respiratory mechanics determined during anesthesia paralysis using the single-breath method (W.A. Zin, L. D. Pengelly, and J. Milic-Emili, J. Appl. Physiol. 52: 1266–1271, 1982) were also similar. Early in spontaneous expiration, however, Ptr increased progressively during the period of interruption, reflecting the presence of gradually decreasing antagonistic (postinspiratory) pressure of the inspiratory muscles. In conclusion, the interrupter technique allows for simultaneous determination of the passive elastic as well as flow-resistive properties of the total respiratory system. The presence of a plateau in postinterruption Ptr may be employed as a useful and simple criterion to confirm the presence of respiratory muscle relaxation.

URBAN FACADE GEOMETRY ON OUTDOOR COMFORT CONDITIONS: A REVIEW

2020 ◽  
Vol 4 (1) ◽  
pp. 45
Author(s):  
Elahe Mirabi ◽  
Nasrollahi Nazanin
Keyword(s):  
Thermal Comfort ◽  
Urban Areas ◽  
Natural Ventilation ◽  
Flow Behavior ◽  
Air Flow ◽  
Urban Geometry ◽  
Wide Range ◽  
Low Energy Buildings ◽  
Outdoor Comfort ◽  
Solar Access

<p>Designing urban facades is considered as a major factor influencing issues<br />such as natural ventilation of buildings and urban areas, radiations in the<br />urban canyon for designing low-energy buildings, cooling demand for<br />buildings in urban area, and thermal comfort in urban streets. However, so<br />far, most studies on urban topics have been focused on flat facades<br />without details of urban layouts. Hence, the effect of urban facades with<br />details such as the balcony and corbelling on thermal comfort conditions<br />and air flow behavior are discussed in this literature review. <strong>Aim</strong>: This<br />study was carried out to investigate the effective factors of urban facades,<br />including the effects of building configuration, geometry and urban<br />canyon’s orientation. <strong>Methodology and Results</strong>: According to the results,<br />the air flow behavior is affected by a wide range of factors such as wind<br />conditions, urban geometry and wind direction. Urban façade geometry<br />can change outdoor air flow pattern, thermal comfort and solar access.<br /><strong>Conclusion, significance and impact study</strong>: In particular, the geometry of<br />the facade, such as indentation and protrusion, has a significant effect on<br />the air flow and thermal behavior in urban facades and can enhance<br />outdoor comfort conditions. Also, Alternation in façade geometry can<br />affect pedestrians' comfort and buildings energy demands.</p>

Nitrogen Removal from Anaerobically-Treated Leachate

1984 ◽  
Vol 19 (1) ◽  
pp. 87-100
Author(s):  
D. Prasad ◽  
J.G. Henry ◽  
P. Elefsiniotis
Keyword(s):  
Nitrogen Removal ◽  
Air Flow ◽  
Operating Conditions ◽  
Air Flow Rate ◽  
Flow Rates ◽  
Anaerobic Filter ◽  
Ph Values ◽  
Wide Range ◽  
Ammonia Desorption ◽  
Effects Of Ph

Abstract Laboratory studies were conducted to demonstrate the effectiveness of diffused aeration for the removal of ammonia from the effluent of an anaerobic filter treating leachate. The effects of pH, temperature and air flow on the process were studied. The coefficient of desorption of ammonia, KD for the anaerobic filter effluent (TKN 75 mg/L with NH3-N 88%) was determined at pH values of 9, 10 and 11, temperatures of 10, 15, 20, 30 and 35°C, and air flow rates of 50, 120, and 190 cm3/sec/L. Results indicated that nitrogen removal from the effluent of anaerobic filters by ammonia desorption was feasible. Removals exceeding 90% were obtained with 8 hours aeration at pH of 10, a temperature of 20°C, and an air flow rate of 190 cm3/sec/L. Ammonia desorption coefficients, KD, determined at other temperatures and air flow rates can be used to predict ammonia removals under a wide range of operating conditions.

Wide-range equations of state for organic liquids

2007 ◽  
Vol 5 ◽  
pp. 113-120 ◽  
Author(s):  
R.Kh. Bolotnova
Keyword(s):  
High Pressures ◽  
Equations Of State ◽  
Organic Liquids ◽  
Liquid Phases ◽  
Wide Range ◽  
High Pressures And Temperatures

The method of construction the wide-range equations of state for organic liquids, describing the gas and liquid phases including dissociation and ionization which occurs during an intense collapse of steam bubbles and accompanied by ultra-high pressures and temperatures, is proposed.

scholarly journals Bilayer ventilated labyrinthine metasurfaces with high sound absorption and tunable bandwidth

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiayuan Du ◽  
Yuezhou Luo ◽  
Xinyu Zhao ◽  
Xiaodong Sun ◽  
Yanan Song ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Air Flow ◽  
Single Layer ◽  
Sound Waves ◽  
Acoustic Metamaterials ◽  
Sound Barrier ◽  
Free Air ◽  
Relative Bandwidth ◽  
Wide Range ◽  
High Sound

AbstractThe recent advent of acoustic metamaterials offers unprecedented opportunities for sound controlling in various occasions, whereas it remains a challenge to attain broadband high sound absorption and free air flow simultaneously. Here, we demonstrated, both theoretically and experimentally, that this problem can be overcome by using a bilayer ventilated labyrinthine metasurface. By altering the spacing between two constituent single-layer metasurfaces and adopting asymmetric losses in them, near-perfect (98.6%) absorption is achieved at resonant frequency for sound waves incident from the front. The relative bandwidth of absorption peak can be tuned in a wide range (from 12% to 80%) by adjusting the open area ratio of the structure. For sound waves from the back, the bilayer metasurface still serves as a sound barrier with low transmission. Our results present a strategy to realize high sound absorption and free air flow simultaneously, and could find applications in building acoustics and noise remediation.

scholarly journals Entanglement entropy in cubic gravitational theories

2021 ◽  
Vol 2021 (5) ◽  
Author(s):  
Elena Cáceres ◽  
Rodrigo Castillo Vásquez ◽  
Alejandro Vilar López
Keyword(s):  
Entanglement Entropy ◽  
Gravitational Theory ◽  
Riemann Tensor ◽  
Holographic Entanglement Entropy ◽  
Gravitational Theories ◽  
Entropy Functional ◽  
Wide Range ◽  
Splitting Problem ◽  
Range Of Values

Abstract We derive the holographic entanglement entropy functional for a generic gravitational theory whose action contains terms up to cubic order in the Riemann tensor, and in any dimension. This is the simplest case for which the so-called splitting problem manifests itself, and we explicitly show that the two common splittings present in the literature — minimal and non-minimal — produce different functionals. We apply our results to the particular examples of a boundary disk and a boundary strip in a state dual to 4- dimensional Poincaré AdS in Einsteinian Cubic Gravity, obtaining the bulk entanglement surface for both functionals and finding that causal wedge inclusion is respected for both splittings and a wide range of values of the cubic coupling.

scholarly journals A Comparison of Some Methods of Deriving the Instantaneous Unit Hydrograph

1985 ◽  
Vol 16 (1) ◽  
pp. 1-10 ◽  
Author(s):  
V. P. Singh ◽  
C. Corradini ◽  
F. Melone
Keyword(s):  
Peak Flow ◽  
Central Italy ◽  
Effective Rainfall ◽  
Unit Hydrograph ◽  
Time To Peak ◽  
Wide Range ◽  
Instantaneous Unit Hydrograph ◽  
Similar Accuracy ◽  
Two Parameters ◽  
Range Of Values

The geomorphological instantaneous unit hydrograph (IUH) proposed by Gupta et al. (1980) was compared with the IUH derived by commonly used time-area and Nash methods. This comparison was performed by analyzing the effective rainfall-direct runoff relationship for four large basins in Central Italy ranging in area from 934 to 4,147 km2. The Nash method was found to be the most accurate of the three methods. The geomorphological method, with only one parameter estimated in advance from the observed data, was found to be little less accurate than the Nash method which has two parameters determined from observations. Furthermore, if the geomorphological and Nash methods employed the same information represented by basin lag, then they produced similar accuracy provided the other Nash parameter, expressed by the product of peak flow and time to peak, was empirically assessed within a wide range of values. It was concluded that it was more appropriate to use the geomorphological method for ungaged basins and the Nash method for gaged basins.

Lubricating motion of a sphere towards a thin porous slab with Saffman slip condition

2019 ◽  
Vol 867 ◽  
pp. 949-968 ◽  
Author(s):  
Sondes Khabthani ◽  
Antoine Sellier ◽  
François Feuillebois
Keyword(s):  
Slip Length ◽  
Solid Sphere ◽  
Slip Condition ◽  
Darcy Law ◽  
Slab Thickness ◽  
Wide Range ◽  
Sphere Radius ◽  
Permeability Parameter ◽  
Interface Slip ◽  
Range Of Values

Near-contact hydrodynamic interactions between a solid sphere and a plane porous slab are investigated in the framework of lubrication theory. The size of pores in the slab is small compared with the slab thickness so that the Darcy law holds there. The slab is thin: that is, its thickness is small compared with the sphere radius. The considered problem involves a sphere translating above the slab together with a permeation flow across the slab and a uniform pressure below. The pressure is continuous across both slab interfaces and the Saffman slip condition applies on its upper interface. An extended Reynolds-like equation is derived for the pressure in the gap between the sphere and the slab. This equation is solved numerically and the drag force on the sphere is calculated therefrom for a wide range of values of the slab interface slip length and of the permeability parameter $\unicode[STIX]{x1D6FD}=24k^{\ast }R/(e\unicode[STIX]{x1D6FF}^{2})$, where $k^{\ast }$ is the permeability, $e$ is the porous slab thickness, $R$ is the sphere radius and $\unicode[STIX]{x1D6FF}$ is the gap. Moreover, asymptotics expansions for the pressure and drag are derived for high and low $\unicode[STIX]{x1D6FD}$. These expansions, which agree with the numerics, are also handy formulae for practical use. All results match with those of other authors in particular cases. The settling trajectory of a sphere towards a porous slab in a fluid at rest is calculated from these results and, as expected, the time for reaching the slab decays for increasing slab permeability and upper interface slip length.

The State of the Art of Rubber-Seal Technology

1987 ◽  
Vol 60 (3) ◽  
pp. 381-416 ◽  
Author(s):  
B. S. Nau
Keyword(s):  
State Of The Art ◽  
Test Procedure ◽  
Working Party ◽  
The State ◽  
Supporting Evidence ◽  
Wide Range ◽  
Lip Seals ◽  
Alternative Hypotheses ◽  
Series Of Experiments ◽  
Range Of Values

Abstract The understanding of the engineering fundamentals of rubber seals of all the various types has been developing gradually over the past two or three decades, but there is still much to understand, Tables V–VII summarize the state of the art. In the case of rubber-based gaskets, the field of high-temperature applications has scarcely been touched, although there are plans to initiate work in this area both in the U.S.A. at PVRC, and in the U.K., at BHRA. In the case of reciprocating rubber seals, a broad basis of theory and experiment has been developed, yet it still is not possible to design such a seal from first principles. Indeed, in a comparative series of experiments run recently on seals from a single batch, tested in different laboratories round the world to the same test procedure, under the aegis of an ISO working party, a very wide range of values was reported for leakage and friction. The explanation for this has still to be ascertained. In the case of rotary lip seals, theories and supporting evidence have been brought forward to support alternative hypotheses for lubrication and sealing mechanisms. None can be said to have become generally accepted, and it remains to crystallize a unified theory.

Sign in / Sign up

Export Citation Format

Share Document