scholarly journals Novel Bloch wave excitation platform based on few-layer photonic crystal deposited on D-shaped optical fiber

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Esteban Gonzalez-Valencia ◽  
Ignacio Del Villar ◽  
Pedro Torres
Keyword(s):  
Optical Fibers ◽  
High Performance ◽  
Light Propagation ◽  
Fiber Optic ◽  
Layer Structure ◽  
Optical Network ◽  
Building Blocks ◽  
Bloch Wave ◽  
Nanophotonic Devices ◽  
Wide Range

AbstractWith the goal of ultimate control over the light propagation, photonic crystals currently represent the primary building blocks for novel nanophotonic devices. Bloch surface waves (BSWs) in periodic dielectric multilayer structures with a surface defect is a well-known phenomenon, which implies new opportunities for controlling the light propagation and has many applications in the physical and biological science. However, most of the reported structures based on BSWs require depositing a large number of alternating layers or exploiting a large refractive index (RI) contrast between the materials constituting the multilayer structure, thereby increasing the complexity and costs of manufacturing. The combination of fiber–optic-based platforms with nanotechnology is opening the opportunity for the development of high-performance photonic devices that enhance the light-matter interaction in a strong way compared to other optical platforms. Here, we report a BSW-supporting platform that uses geometrically modified commercial optical fibers such as D-shaped optical fibers, where a few-layer structure is deposited on its flat surface using metal oxides with a moderate difference in RI. In this novel fiber optic platform, BSWs are excited through the evanescent field of the core-guided fundamental mode, which indicates that the structure proposed here can be used as a sensing probe, along with other intrinsic properties of fiber optic sensors, as lightness, multiplexing capacity and easiness of integration in an optical network. As a demonstration, fiber optic BSW excitation is shown to be suitable for measuring RI variations. The designed structure is easy to manufacture and could be adapted to a wide range of applications in the fields of telecommunications, environment, health, and material characterization.

scholarly journals Deep Learning for Computational Mode Decomposition in Optical Fibers

2020 ◽  
Vol 10 (4) ◽  
pp. 1367
Author(s):  
Stefan Rothe ◽  
Qian Zhang ◽  
Nektarios Koukourakis ◽  
Jürgen W. Czarske
Keyword(s):  
Neural Network ◽  
Optical Fibers ◽  
High Performance ◽  
Deep Neural Network ◽  
Light Propagation ◽  
Training Data ◽  
Steady Increase ◽  
Cyberphysical Systems ◽  
Multimode Fibers ◽  
Propagation Of Light

Multimode fibers are regarded as the key technology for the steady increase in data rates in optical communication. However, light propagation in multimode fibers is complex and can lead to distortions in the transmission of information. Therefore, strategies to control the propagation of light should be developed. These strategies include the measurement of the amplitude and phase of the light field after propagation through the fiber. This is usually done with holographic approaches. In this paper, we discuss the use of a deep neural network to determine the amplitude and phase information from simple intensity-only camera images. A new type of training was developed, which is much more robust and precise than conventional training data designs. We show that the performance of the deep neural network is comparable to digital holography, but requires significantly smaller efforts. The fast characterization of multimode fibers is particularly suitable for high-performance applications like cyberphysical systems in the internet of things.

scholarly journals Fused heterocycle-based energetic materials (2012–2019)

2020 ◽  
Vol 8 (8) ◽  
pp. 4193-4216 ◽  
Author(s):  
Haixiang Gao ◽  
Qinghua Zhang ◽  
Jean'ne M. Shreeve
Keyword(s):  
Energetic Materials ◽  
High Performance ◽  
Building Blocks ◽  
Fused Heterocycles ◽  
Wide Range

Fused heterocycles are unique building blocks for the synthesis of a wide range of high-performance energetic materials.

scholarly journals Dual-band dichroic asymmetric transmission of linearly polarized waves in terahertz chiral metamaterial

Nanophotonics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 3235-3242 ◽  
Author(s):  
Tingting Lv ◽  
Xieyu Chen ◽  
Guohua Dong ◽  
Meng Liu ◽  
Dongming Liu ◽  
...  
Keyword(s):  
High Performance ◽  
Light Propagation ◽  
Polarization State ◽  
Dual Band ◽  
Terahertz Waves ◽  
Asymmetric Transmission ◽  
Polarized Waves ◽  
Wide Range ◽  
Linearly Polarized ◽  
Chiral Metamaterial

AbstractPolarization conversion dichroism is of particular interest in manipulating the polarization state of light, whereas high-performance asymmetric transmission (AT) of linearly polarized waves is still inaccessible in the terahertz range. Here, a bilayer chiral metamaterial consisting of orthogonally chained S-shaped patterns with broken symmetry along the light propagation direction is proposed and demonstrated experimentally to realize a dual-band dichroic AT effect for linearly polarized terahertz waves. The AT effects are robust across a wide range of incident angles. The observed strong AT can be theoretically explained by a multiple reflection and transmission interference model and the transfer matrix method. The proposed bilayer chiral metamaterial may have broad applications in polarization manipulation, chiral biosensing and direction-dependent information processing.

scholarly journals On-chip nanophotonics and future challenges

Nanophotonics ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 3733-3753 ◽  
Author(s):  
Alina Karabchevsky ◽  
Aviad Katiyi ◽  
Angeleene S. Ang ◽  
Adir Hazan
Keyword(s):  
Optical Waveguides ◽  
High Performance ◽  
Logic Gates ◽  
Building Blocks ◽  
Optical Systems ◽  
Optical Processing ◽  
Nanophotonic Devices ◽  
All Optical ◽  
Future Challenges ◽  
On Chip

AbstractOn-chip nanophotonic devices are a class of devices capable of controlling light on a chip to realize performance advantages over ordinary building blocks of integrated photonics. These ultra-fast and low-power nanoscale optoelectronic devices are aimed at high-performance computing, chemical, and biological sensing technologies, energy-efficient lighting, environmental monitoring and more. They are increasingly becoming an attractive building block in a variety of systems, which is attributed to their unique features of large evanescent field, compactness, and most importantly their ability to be configured according to the required application. This review summarizes recent advances of integrated nanophotonic devices and their demonstrated applications, including but not limited to, mid-infrared and overtone spectroscopy, all-optical processing on a chip, logic gates on a chip, and cryptography on a chip. The reviewed devices open up a new chapter in on-chip nanophotonics and enable the application of optical waveguides in a variety of optical systems, thus are aimed at accelerating the transition of nanophotonics from academia to the industry.

scholarly journals Address Fiber Optical Sensor for Relative Humidity Measuring in a Switchgear

2020 ◽  
pp. 1-16
Author(s):  
Rin. Sh. Misbakhov ◽  
A. N. Vasev ◽  
A. Zh. Sakhabutdinov ◽  
I. I. Nureev ◽  
O. G. Morozov ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Optical Networks ◽  
Fiber Optic ◽  
Layer Structure ◽  
Broad Class ◽  
Bragg Gratings ◽  
Fiber Optic Sensors ◽  
Parallel Structure ◽  
Wide Range ◽  
On Line

A number of governing documents and by-laws of the Russian Federation, branch ministries, departments and companies have introduced the use of measuring relative air humidity, elements insulation, and SF6 into operation and maintenance process of complete switchgear. A wide range of high-precision laboratory instruments has been developed to implement these measurements. However, as a rule, these are scheduled measurements to be carried out once or twice a quarter, although the constant on-line monitoring of humidity is concerned in both the production and scientific circles of the energy industry. The possibility of on-line monitoring appeared with the advent of fiber-optic object-based passive networks for collecting information and the possibility of forming interrogation channels in them, which is provided for by the development of the Smart Grid Plus concept. Fiber optic sensors, single in their physical layer structure with passive optical networks, are highly robust and resistant to high electromagnetic fields, typical of those generated in a switchgear, and are designed to operate in harsh environments. Among their broad class, fiber optic sensors on Bragg gratings, which differ from others by direct measurement methods, have significant advantages. In particular, an increase or decrease in relative humidity will lead to a corresponding change in the wavelength of the sensing source reflected from the grating, which can be measured with an accuracy of sixth place from its absolute value.This paper proposes to consider a two-element sensor of relative humidity of a parallel structure, which differs from the existing ones by using address fiber Bragg gratings made in SMF-28 fiber. One of the gratings has a polyimide-replaced quartz shell, synthesized using a reductant fiber coating, and a completely multiplicative response to temperature and deformation caused by humidity. The second grating is recorded in a standard fiber and responds only to temperature. It is possible to include an additional third grating with a partially etched cladding, which can be used for refract metric measurements of the amount of condensed moisture on the elements of a complete switchgear. All the gratings are identical, have, as a rule, the same Bragg wavelength after manipulating their claddings, but they have differing unique addresses, which are formed by recording two transparency windows in each of the gratings with different difference frequency space. The transparency windows correspond to phase p-shifts symmetrically located at the same distance from the center of each grating. The structure obtained makes it possible to record information of the measurement conversion at the said difference frequencies in the radio range, which significantly increases the speed of relative humidity measurements and their accuracy by an order of magnitude more. In addition to what has been said, it is possible to note the capability for building a network of these sensors in series arranged in switchgear devices, with a different radiofrequency address group being used in each of them.

scholarly journals Subwavelength structured silicon waveguides and photonic devices

Nanophotonics ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 1321-1340
Author(s):  
Lu Sun ◽  
Yong Zhang ◽  
Yu He ◽  
Hongwei Wang ◽  
Yikai Su
Keyword(s):  
High Performance ◽  
Building Blocks ◽  
Photonic Devices ◽  
Subwavelength Structures ◽  
Silicon Waveguides ◽  
Slab Waveguides ◽  
Index Matching ◽  
Silicon Photonic ◽  
Wide Range ◽  
Optical Properties Of Materials

AbstractSubwavelength structures such as subwavelength gratings (SWGs) and subwavelength metamaterials are capable of tailoring the optical properties of materials and controlling the flow of light at the nanoscale. The effective indices of the subwavelength structured strip and slab waveguides can be changed in a wide range by choosing an appropriate duty cycle or a filling factor of silicon, which provides an effective method to manipulate the optical field and achieve effective index matching for functional devices. Recent advances in nanofabrication techniques have made it possible to implement subwavelength structures in silicon strip and slab waveguides. Here we review various approaches used to design subwavelength structures and achieve exotic optical responses and discuss how these structures can be used to realize high-performance silicon photonic devices. Both one-dimensional SWG devices and two-dimensional subwavelength metamaterial devices are covered in this review, including subwavelength structure–based polarization handling devices, mode manipulation devices, and building blocks for integrated optical interconnects. Perspectives on subwavelength structured silicon photonic devices are also discussed.

High-voltage monitoring by the fiber-optic recirculating measuring system

2020 ◽  
pp. 38-44
Author(s):  
A. V. Polyakov ◽  
M. A. Ksenofontov
Keyword(s):  
Optical Fibers ◽  
High Voltage ◽  
Optical Sensors ◽  
Electromagnetic Interference ◽  
Fiber Optic ◽  
Electric Power Industry ◽  
Measuring System ◽  
Voltage Range ◽  
External Electromagnetic Fields ◽  
Optic Communication

Optical technologies for measuring electrical quantities attract great attention due to their unique properties and significant advantages over other technologies used in high-voltage electric power industry: the use of optical fibers ensures high stability of measuring equipment to electromagnetic interference and galvanic isolation of high-voltage sensors; external electromagnetic fields do not influence the data transmitted from optical sensors via fiber-optic communication lines; problems associated with ground loops are eliminated, there are no side electromagnetic radiation and crosstalk between the channels. The structure and operation principle of a quasi-distributed fiber-optic high-voltage monitoring system is presented. The sensitive element is a combination of a piezo-ceramic tube with an optical fiber wound around it. The device uses reverse transverse piezoelectric effect. The measurement principle is based on recording the change in the recirculation frequency under the applied voltage influence. When the measuring sections are arranged in ascending order of the measured effective voltages relative to the receiving-transmitting unit, a relative resolution of 0,3–0,45 % is achieved for the PZT-5H and 0,8–1,2 % for the PZT-4 in the voltage range 20–150 kV.

Factors Affecting Molecular Self-Assembly and Its Mechanism

2012 ◽  
Vol 9 (1) ◽  
pp. 43 ◽  
Author(s):  
Hueyling Tan
Keyword(s):  
Self Assembly ◽  
Building Blocks ◽  
Molecular Engineering ◽  
Molecular Structures ◽  
Polymer Science ◽  
New Approach ◽  
Factors Affecting ◽  
Dna Structures ◽  
Self Assembling ◽  
Wide Range

Molecular self-assembly is ubiquitous in nature and has emerged as a new approach to produce new materials in chemistry, engineering, nanotechnology, polymer science and materials. Molecular self-assembly has been attracting increasing interest from the scientific community in recent years due to its importance in understanding biology and a variety of diseases at the molecular level. In the last few years, considerable advances have been made in the use ofpeptides as building blocks to produce biological materials for wide range of applications, including fabricating novel supra-molecular structures and scaffolding for tissue repair. The study ofbiological self-assembly systems represents a significant advancement in molecular engineering and is a rapidly growing scientific and engineering field that crosses the boundaries ofexisting disciplines. Many self-assembling systems are rangefrom bi- andtri-block copolymers to DNA structures as well as simple and complex proteins andpeptides. The ultimate goal is to harness molecular self-assembly such that design andcontrol ofbottom-up processes is achieved thereby enabling exploitation of structures developed at the meso- and macro-scopic scale for the purposes oflife and non-life science applications. Such aspirations can be achievedthrough understanding thefundamental principles behind the selforganisation and self-synthesis processes exhibited by biological systems.

Stereospecific, Palladium-catalyzed C(sp3)–H Alkenylation and Alkynylation of a Proline Derivative Enabled by 8-Aminoquinoline as a Directing Group

2020 ◽  
Author(s):  
Aleksandra Balliu ◽  
Aaltje Roelofje Femmigje Strijker ◽  
Michael Oschmann ◽  
Monireh Pourghasemi Lati ◽  
Oscar Verho
Keyword(s):  
Carboxylic Acid ◽  
Building Blocks ◽  
Wide Range ◽  
Palladium Catalyzed ◽  
Directing Group ◽  
High Yields ◽  
Vinyl Iodides ◽  
Initial Results

<p>In this preprint, we present our initial results concerning a stereospecific Pd-catalyzed protocol for the C3 alkenylation and alkynylation of a proline derivative carrying the well utilized 8‑aminoquinoline directing group. Efficient C–H alkenylation was achieved with a wide range of vinyl iodides bearing different aliphatic, aromatic and heteroaromatic substituents, to furnish the corresponding C3 alkenylated products in good to high yields. In addition, we were able show that this protocol can also be used to install an alkynyl group into the pyrrolidine scaffold, when a TIPS-protected alkynyl bromide was used as the reaction partner. Furthermore, two different methods for the removal of the 8-aminoquinoline auxiliary are reported, which can enable access to both <i>cis</i>- and <i>trans</i>-configured carboxylic acid building blocks from the C–H alkenylation products.</p>

Efficient Prediction of Structural and Electronic Properties of Hybrid 2D Materials Using DFT and Machine Learning

2018 ◽  
Author(s):  
Sherif Tawfik ◽  
Olexandr Isayev ◽  
Catherine Stampfl ◽  
Joseph Shapter ◽  
David Winkler ◽  
...  
Keyword(s):  
Machine Learning ◽  
Band Gap ◽  
Density Functional ◽  
2D Materials ◽  
Van Der Waals ◽  
Building Blocks ◽  
Machine Learning Techniques ◽  
Interlayer Distance ◽  
Computational Screening ◽  
Wide Range

Materials constructed from different van der Waals two-dimensional (2D) heterostructures offer a wide range of benefits, but these systems have been little studied because of their experimental and computational complextiy, and because of the very large number of possible combinations of 2D building blocks. The simulation of the interface between two different 2D materials is computationally challenging due to the lattice mismatch problem, which sometimes necessitates the creation of very large simulation cells for performing density-functional theory (DFT) calculations. Here we use a combination of DFT, linear regression and machine learning techniques in order to rapidly determine the interlayer distance between two different 2D heterostructures that are stacked in a bilayer heterostructure, as well as the band gap of the bilayer. Our work provides an excellent proof of concept by quickly and accurately predicting a structural property (the interlayer distance) and an electronic property (the band gap) for a large number of hybrid 2D materials. This work paves the way for rapid computational screening of the vast parameter space of van der Waals heterostructures to identify new hybrid materials with useful and interesting properties.

Sign in / Sign up

Export Citation Format

Share Document