scholarly journals Large Scale Triboelectric Nanogenerator and Self-Powered Pressure Sensor Array Using Low Cost Roll-to-Roll UV Embossing

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Lokesh Dhakar ◽  
Sudeep Gudla ◽  
Xuechuan Shan ◽  
Zhiping Wang ◽  
Francis Eng Hock Tay ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Large Scale ◽  
Sensor Array ◽  
Low Cost ◽  
Triboelectric Nanogenerator ◽  
Roll To Roll ◽  
Self Powered

Highly responsive screen-printed asymmetric pressure sensor based on laser-induced graphene

2021 ◽  
Author(s):  
Jiang Zhao ◽  
Jiahao Gui ◽  
Jinsong Luo ◽  
Jing Gao ◽  
Caidong Zheng ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Screen Printing ◽  
Large Scale ◽  
Low Cost ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Integrated Sensor ◽  
Patterned Electrodes ◽  
Screen Printed

Abstract Graphene-based pressure sensors have received extensive attention in wearable devices. However, reliable, low-cost, and large-scale preparation of structurally stable graphene electrodes for flexible pressure sensors is still a challenge. Herein, for the first time, laser-induced graphene (LIG) powder are prepared into screen printing ink, and shape-controllable LIG patterned electrodes can be obtained on various substrates using a facile screen printing process, and a novel asymmetric pressure sensor composed of the resulting screen-printed LIG electrodes has been developed. Benefit from the 3D porous structure of LIG, the as-prepared flexible LIG screen-printed asymmetric pressure sensor has super sensing properties with a high sensitivity of 1.86 kPa−1, low detection limit of about 3.4 Pa, short response time, and long cycle durability. Such excellent sensing performances give our flexible asymmetric LIG screen-printed pressure sensor the ability to realize real-time detection of tiny body physiological movements (such as wrist pulse and pronunciation action). Besides, the integrated sensor array has a multi-touch function. This work could stimulate an appropriate approach to designing shape-controllable LIG screen-printed patterned electrodes on various flexible substrates to adapt the specific needs of fulfilling compatibility and modular integration for potential application prospects in wearable electronics.

scholarly journals Rationally patterned electrode of direct-current triboelectric nanogenerators for ultrahigh effective surface charge density

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhihao Zhao ◽  
Yejing Dai ◽  
Di Liu ◽  
Linglin Zhou ◽  
Shaoxin Li ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Charge Density ◽  
Surface Charge ◽  
Direct Current ◽  
Surface Charge Density ◽  
Large Scale ◽  
Triboelectric Nanogenerator ◽  
Electrode Structure ◽  
Effective Surface ◽  
Self Powered

AbstractAs a new-era of energy harvesting technology, the enhancement of triboelectric charge density of triboelectric nanogenerator (TENG) is always crucial for its large-scale application on Internet of Things (IoTs) and artificial intelligence (AI). Here, a microstructure-designed direct-current TENG (MDC-TENG) with rationally patterned electrode structure is presented to enhance its effective surface charge density by increasing the efficiency of contact electrification. Thus, the MDC-TENG achieves a record high charge density of ~5.4 mC m−2, which is over 2-fold the state-of-art of AC-TENGs and over 10-fold compared to previous DC-TENGs. The MDC-TENG realizes both the miniaturized device and high output performance. Meanwhile, its effective charge density can be further improved as the device size increases. Our work not only provides a miniaturization strategy of TENG for the application in IoTs and AI as energy supply or self-powered sensor, but also presents a paradigm shift for large-scale energy harvesting by TENGs.

scholarly journals Mesoporous Highly-Deformable Composite Polymer for a Gapless Triboelectric Nanogenerator via a One-Step Metal Oxidation Process

Micromachines ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 656 ◽  
Author(s):  
Hee Hwang ◽  
Younghoon Lee ◽  
Choongyeop Lee ◽  
Youngsuk Nam ◽  
Jinhyoung Park ◽  
...  
Keyword(s):  
Large Scale ◽  
Cost Effective ◽  
Triboelectric Nanogenerator ◽  
Pressure Sensitivity ◽  
Composite Polymer ◽  
Pdms Film ◽  
One Step ◽  
Self Powered ◽  
Triboelectric Nanogenerators ◽  
Flake Structure

The oxidation of metal microparticles (MPs) in a polymer film yields a mesoporous highly-deformable composite polymer for enhancing performance and creating a gapless structure of triboelectric nanogenerators (TENGs). This is a one-step scalable synthesis for developing large-scale, cost-effective, and light-weight mesoporous polymer composites. We demonstrate mesoporous aluminum oxide (Al2O3) polydimethylsiloxane (PDMS) composites with a nano-flake structure on the surface of Al2O3 MPs in pores. The porosity of mesoporous Al2O3-PDMS films reaches 71.35% as the concentration of Al MPs increases to 15%. As a result, the film capacitance is enhanced 1.8 times, and TENG output performance is 6.67-times greater at 33.3 kPa and 4 Hz. The pressure sensitivity of 6.71 V/kPa and 0.18 μA/kPa is determined under the pressure range of 5.5–33.3 kPa. Based on these structures, we apply mesoporous Al2O3-PDMS film to a gapless TENG structure and obtain a linear pressure sensitivity of 1.00 V/kPa and 0.02 μA/kPa, respectively. Finally, we demonstrate self-powered safety cushion sensors for monitoring human sitting position by using gapless TENGs, which are developed with a large-scale and highly-deformable mesoporous Al2O3-PDMS film with dimensions of 6 × 5 pixels (33 × 27 cm2).

scholarly journals A highly reliable, impervious and sustainable triboelectric nanogenerator as a zero-power consuming active pressure sensor

2020 ◽  
Vol 2 (2) ◽  
pp. 746-754 ◽  
Author(s):  
Venkateswaran Vivekananthan ◽  
Arunkumar Chandrasekhar ◽  
Nagamalleswara Rao Alluri ◽  
Yuvasree Purusothaman ◽  
Sang-Jae Kim
Keyword(s):  
Pressure Sensor ◽  
Mechanical Energy ◽  
Silicone Elastomer ◽  
Triboelectric Nanogenerator ◽  
Energy Scavenging ◽  
Active Pressure ◽  
Self Powered ◽  
Water Proof

A water proof silicone elastomer based triboelectric nanogenerator for bio-mechanical energy scavenging and a zero-power consuming/self-powered pressure sensor.

scholarly journals High-Sensitivity Flexible Pressure Sensor-Based 3D CNTs Sponge for Human–Computer Interaction

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3465
Author(s):  
Jianli Cui ◽  
Xueli Nan ◽  
Guirong Shao ◽  
Huixia Sun
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Pressure Sensors ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Wide Range ◽  
Flexible Pressure Sensors

Researchers are showing an increasing interest in high-performance flexible pressure sensors owing to their potential uses in wearable electronics, bionic skin, and human–machine interactions, etc. However, the vast majority of these flexible pressure sensors require extensive nano-architectural design, which both complicates their manufacturing and is time-consuming. Thus, a low-cost technology which can be applied on a large scale is highly desirable for the manufacture of flexible pressure-sensitive materials that have a high sensitivity over a wide range of pressures. This work is based on the use of a three-dimensional elastic porous carbon nanotubes (CNTs) sponge as the conductive layer to fabricate a novel flexible piezoresistive sensor. The synthesis of a CNTs sponge was achieved by chemical vapor deposition, the basic underlying principle governing the sensing behavior of the CNTs sponge-based pressure sensor and was illustrated by employing in situ scanning electron microscopy. The CNTs sponge-based sensor has a quick response time of ~105 ms, a high sensitivity extending across a broad pressure range (less than 10 kPa for 809 kPa−1) and possesses an outstanding permanence over 4,000 cycles. Furthermore, a 16-pixel wireless sensor system was designed and a series of applications have been demonstrated. Its potential applications in the visualizing pressure distribution and an example of human–machine communication were also demonstrated.

scholarly journals Woven Fabric Triboelectric Nanogenerator for Biomotion Energy Harvesting and as Self-Powered Gait-Recognizing Socks

Energies ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 4119
Author(s):  
Chaoyu Chen ◽  
Lei Zhang ◽  
Wenbo Ding ◽  
Lijun Chen ◽  
Jinkang Liu ◽  
...  
Keyword(s):  
Low Cost ◽  
Rechargeable Batteries ◽  
Woven Fabric ◽  
Future Research ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Long Time ◽  
Environmental Pollution Problem ◽  
Self Powered ◽  
High Flexibility

In recent years, rapid advancements have developed in multifunctional and wearable electronics, which call for more lightweight, flexible energy sources. However, traditional disposable batteries and rechargeable batteries are not very suitable because of their bulky appearance, limited capacity, low flexibility, and environmental pollution problem. Here, by applying a mature manufacturing technology that has existed in the textile field for a long time, a woven fabric triboelectric nanogenerator (WF-TENG) with a thinner structure that can be mass-fabricated with low cost, perfect stability, and high flexibility is designed and reported. Due to the good intrinsic quality of TENGs, the maximum voltage of this WF-TENG can easily reach 250 V under a pressure of 3.5 kPa and a tapping frequency of 0.33 Hz. Because of the stable plain-woven structure, the output voltage can remain relatively stable even after the WF-TENG has been working for about 5 h continuously, clearly demonstrating its robustness and practical value. Moreover, good sensitivity endows this WF-TENG with the capability of being applied as self-powered sensors, such as a self-powered smart real-time gait-recognizing sock. This WF-TENG shows us a simple and effective method to fabricate a wearable textile product with functional ability, which is very meaningful for future research.

Sign in / Sign up

Export Citation Format

Share Document