A mesoporous “shell-in-shell” structured nanocatalyst with large surface area, enhanced synergy, and improved catalytic performance for Suzuki–Miyaura coupling reaction

2014 ◽  
Vol 50 (82) ◽  
pp. 12356-12359 ◽  
Author(s):  
Baocang Liu ◽  
Yuefang Niu ◽  
Yan Li ◽  
Fan Yang ◽  
Jiamin Guo ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Coupling Reaction ◽  
Catalytic Performance ◽  
Large Surface Area ◽  
Mesoporous Shell

A novel mesoporous “shell-in-shell” structured nanoreactor (@Pd/meso-TiO2/Pd@meso-SiO2) shows superior catalytic activity, stability, and selectivity for Suzuki–Miyaura coupling reaction.

scholarly journals Influence of the Reduction Temperature and the Nature of the Support on the Performance of Zirconia and Alumina-Supported Pt Catalysts for n-Dodecane Hydroisomerization

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 88
Author(s):  
Diana García-Pérez ◽  
Maria Consuelo Alvarez-Galvan ◽  
Jose M. Campos-Martin ◽  
Jose L. G. Fierro
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Catalytic Properties ◽  
Catalytic Performance ◽  
Major Influence ◽  
Pt Catalysts ◽  
Reduction Temperature ◽  
Metal Dispersion ◽  
Tungsten Oxides ◽  
Supported Pt Catalysts

Catalysts based on zirconia- and alumina-supported tungsten oxides (15 wt % W) with a small loading of platinum (0.3 wt % Pt) were selected to study the influence of the reduction temperature and the nature of the support on the hydroisomerization of n-dodecane. The reduction temperature has a major influence on metal dispersion, which impacts the catalytic activity. In addition, alumina and zirconia supports show different catalytic properties (mainly acid site strength and surface area), which play an important role in the conversion. The NH3-TPD profiles indicate that the acidity in alumina-based catalysts is clearly higher than that in their zirconia counterparts; this acidity can be attributed to a stronger interaction of the WOx species with alumina. The PtW/Al catalyst was found to exhibit the best catalytic performance for the hydroisomerization of n-dodecane based on its higher acidity, which was ascribed to its larger surface area relative to that of its zirconia counterparts. The selectivity for different hydrocarbons (C7–10, C11 and i-C12) was very similar for all the catalysts studied, with branched C12 hydrocarbons being the main products obtained (~80%). The temperature of 350 °C was clearly the best reduction temperature for all the catalysts studied in a trickled-bed-mode reactor.

MXenes for Gas and Biological Sensor

2021 ◽  
pp. 107-138
Keyword(s):  
Thermal Conductivity ◽  
Catalytic Activity ◽  
Surface Area ◽  
Large Surface Area ◽  
High Thermal Conductivity ◽  
Two Dimensional ◽  
Gas Removal ◽  
Research Platform ◽  
Experimental Approaches ◽  
Biosensor Applications

Recent advancement of two dimensional MXene nanomaterial offers promise in gases and biosensor areas owing to its large surface area, high thermal conductivity, remarkable safety and excellent catalytic activity traits. The current chapter aimed to review the fundamental and technological aspects of MXenes, including myriad synthesis techniques and structural as well as electronic characteristics of these compounds. The features elucidated in the subsequent sections, examined by both theoretical and experimental approaches and potentialities of MXenes in the gas removal and biosensor applications. Several challenges and exciting future opportunities of this research platform are lastly summarized.

Construction of light-harvesting system for enhanced catalytic performance of Pd nanoframes toward Suzuki coupling reaction

2017 ◽  
Vol 5 (21) ◽  
pp. 10150-10153 ◽  
Author(s):  
Lini Yang ◽  
Qi Zhan ◽  
Zhenni Wang ◽  
Qiang Chen ◽  
Jing Tong ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Light Harvesting ◽  
Coupling Reaction ◽  
Suzuki Coupling ◽  
Catalytic Performance ◽  
Coupling Reactions ◽  
Suzuki Coupling Reaction

Au octahedra have been encapsulated into Pd nanoframes to further enhance the catalytic activity of Pd nanoframes toward Suzuki coupling reactions.

Graphene nanohybrids for enhanced catalytic activity and large surface area

2018 ◽  
Vol 9 (01) ◽  
pp. 27-36 ◽  
Author(s):  
Sabeen Fatima ◽  
S. Irfan Ali ◽  
Daniyal Younas ◽  
Amjad Islam ◽  
Deji Akinwande ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Large Surface Area ◽  
Image Position

Abstract

scholarly journals Metal Nanoparticles as Green Catalysts

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3602 ◽  
Author(s):  
Neel Narayan ◽  
Ashokkumar Meiyazhagan ◽  
Robert Vajtai
Keyword(s):  
Catalytic Activity ◽  
Composite Materials ◽  
Green Synthesis ◽  
Metal Nanoparticles ◽  
Surface Area ◽  
Significant Role ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Performance ◽  
Materials Development

Nanoparticles play a significant role in various fields ranging from electronics to composite materials development. Among them, metal nanoparticles have attracted much attention in recent decades due to their high surface area, selectivity, tunable morphologies, and remarkable catalytic activity. In this review, we discuss various possibilities for the synthesis of different metal nanoparticles; specifically, we address some of the green synthesis approaches. In the second part of the paper, we review the catalytic performance of the most commonly used metal nanoparticles and we explore a few roadblocks to the commercialization of the developed metal nanoparticles as efficient catalysts.

Large-scale and facile synthesis of a porous high-entropy alloy CrMnFeCoNi as an efficient catalyst

2020 ◽  
Vol 8 (35) ◽  
pp. 18318-18326 ◽  
Author(s):  
Hailong Peng ◽  
Yangcenzi Xie ◽  
Zicheng Xie ◽  
Yunfeng Wu ◽  
Wenkun Zhu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Large Scale ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Performance ◽  
High Entropy Alloy ◽  
Facile Synthesis ◽  
Efficient Catalyst ◽  
High Entropy

Porous high entropy alloy CrMnFeCoNi exhibited remarkable catalytic activity and stability toward p-nitrophenol hydrogenation. The enhanced catalytic performance not only resulted from the high surface area, but also from exposed high-index facets with terraces.

scholarly journals Preparation of porous TiO2 photocatalyts with different crystal phases and high catalytic activity by simple calcination of titanate nanofibers

RSC Advances ◽  
2017 ◽  
Vol 7 (72) ◽  
pp. 45742-45745 ◽  
Author(s):  
Yulan Peng ◽  
Xiaojun Shen ◽  
Lingzhi Wang ◽  
Baozhu Tian ◽  
Yongdi Liu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Large Surface Area ◽  
High Catalytic Activity ◽  
Porous Tio2 ◽  
Different Temperatures ◽  
Crystal Phases

Porous TiO2 materials with different crystal phases and large surface area were prepared by calcining titanate nanofibers under different temperatures for efficient photocatalysis.

scholarly journals Properties and catalytic performance of sulphate-vanadia impregnated fumed silica as oxidative catalyst

2015 ◽  
Vol 11 (2) ◽  
Author(s):  
Nor Masdiana Zulkeple ◽  
Norhasyimah Mohd Kamal ◽  
Jamilah Mohd Ekhsan ◽  
Salasiah Che Me ◽  
Swee Ean Lim ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Catalytic Activity ◽  
Charge Transfer ◽  
Surface Area ◽  
Sulphuric Acid ◽  
Fumed Silica ◽  
Catalytic Performance ◽  
Support Surface ◽  
High Catalytic Activity ◽  
Impregnation Method

A series of sulphate-vanadia impregnated fumed silica oxidative catalysts were synthesized via impregnation method. The samples were prepared by impregnation of 1 wt% of vanadium and 0.2 M of sulphuric acid onto fumed silica as support. Surface area of the silica supported samples were similar of 118 m2/g. UV-Vis DRS results showed existence of o supported V species and the charge transfer bands associated with O2- to V5+ in tetrahedral environments. Catalytic performance were evaluated via epoxidation of 1-octene to 1,2-epoxyoctane using hydrogen peroxide as an oxidant. It had been demonstrated that sulphate-vanadia impregnated fumed silica had high catalytic activity of 626 ± 0.2 mmol epoxide was produced after 24 h reaction. This may indicate that more oxidative sites were generated after the impregnation of V and sulphate onto the SiO2 matrixes.

Magnetic Spinel Ferrite: An Efficient, Reusable Nano Catalyst for HMFSynthesis

2021 ◽  
Vol 10 ◽  
Author(s):  
Jyoti Dhariwal ◽  
Ravina Yadav ◽  
Sheetal Yadav ◽  
Anshu Kumar Sinha ◽  
Chandra Mohan Srivastava ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Heterogeneous Catalysts ◽  
Spinel Ferrite ◽  
Active Surface ◽  
Catalytic Performance ◽  
Ferrite Nanoparticles ◽  
Precipitation Method ◽  
Magnetic Characteristics ◽  
Nano Catalyst

Aim: In the present work, the preparation and catalytic activity of spinel ferrite [MFe2O4; M = Fe, Mn, Co, Cu, Ni] nanoparticles to synthesize 5-hydroxymethylfurfural (HMF) have been discussed. Background: Ferrites possess unique physicochemical properties, including excellent magnetic characteristics, high specific surface area, active surface sites, high chemical stability, tunable shape and size, and easy functionalization. These properties make them essential heterogeneous catalysts in many organic reactions. Objective: This study aims to synthesize a series of transition metal ferrite nanoparticles and use them in the dehydration of carbohydrates for 5-hydroxymethylfurfural (HMF) synthesis. Method: The ferrite nanoparticles were prepared via the co-precipitation method, and PXRD confirmed their phase stability. The surface area and the crystallite size of the nanoparticles were calculated using BET and PXRD, respectively. Result: The easily prepared heterogeneous nanocatalyst showed a significant catalytic performance, and among all spinel ferrites, CuFe2O4 revealed maximum catalytic ability. Conclusion: Being a heterogeneous catalyst and magnetic in nature, ferrite nanoparticles were easily recovered by using an external magnet and reused up to several runs without substantial loss in catalytic activity. Others: HMF was synthesized from fructose in a good yield of 71%.

Sign in / Sign up

Export Citation Format

Share Document