Nanosilver as a new generation of silver catalysts in organic transformations for efficient synthesis of fine chemicals

2015 ◽  
Vol 5 (5) ◽  
pp. 2554-2574 ◽  
Author(s):  
Xiao-Yun Dong ◽  
Zi-Wei Gao ◽  
Ke-Fang Yang ◽  
Wei-Qiang Zhang ◽  
Li-Wen Xu

Silver nanoparticles catalysis has been of great interest in organic synthesis and has expanded rapidly in the past ten years because of nanosilver catalysts' unique reactivity and selectivity, stability, as well as recyclability in catalytic reactions.

2019 ◽  
Vol 16 (2) ◽  
pp. 258-275 ◽  
Author(s):  
Navjeet Kaur

Background:A wide variety of biological activities are exhibited by N, O and S containing heterocycles and recently, many reports appeared for the synthesis of these heterocycles. The synthesis of heterocycles with the help of metal and non-metal catalyst has become a highly rewarding and important method in organic synthesis. This review article concentrated on the synthesis of S-heterocylces in the presence of metal and non-metal catalyst. The synthesis of five-membered S-heterocycles is described here.Objective:There is a need for the development of rapid, efficient and versatile strategy for the synthesis of heterocyclic rings. Metal, non-metal and organocatalysis involving methods have gained prominence because traditional conditions have disadvantages such as long reaction times, harsh conditions and limited substrate scope.Conclusion:The metal-, non-metal-, and organocatalyst assisted organic synthesis is a highly dynamic research field. For ßthe chemoselective and efficient synthesis of heterocyclic molecules, this protocol has emerged as a powerful route. Various methodologies in the past few years have been pointed out to pursue more sustainable, efficient and environmentally benign procedures and products. Among these processes, the development of new protocols (catalysis), which avoided the use of toxic reagents, are the focus of intense research.


2020 ◽  
Vol 7 (1) ◽  
pp. 105-119 ◽  
Author(s):  
Swapnil A. Padvi ◽  
Dipak S. Dalal

Task-specific ionic liquids (TSILs) have received increased attention over the past few years as a Green Catalysts and Solvents for a large number of organic transformations. The present review article aims to provide an introduction, types of task-specific ionic liquids, preparation/synthesis, physical properties, characterization, use of TSILs as solvent and catalyst in organic synthesis.


Author(s):  
Douglass F. Taber ◽  
Tristan Lambert

Organic synthesis is a vibrant and rapidly evolving field; chemists can now cyclize alkenes directly onto enones. Like the first five books in this series, Organic Synthesis: State of the Art 2013-2015 will lead readers quickly to the most important recent developments in a research area. This series offers chemists a way to stay abreast of what's new and exciting in organic synthesis. The cumulative reaction/transformation index of 2013-2015 outlines all significant new organic transformations over the past twelve years. Future volumes will continue to come out every two years. The 2013-2015 volume features the best new methods in subspecialties such as C-O, C-N and C-C ring construction, catalytic asymmetric synthesis, selective C-H functionalization, and enantioselective epoxidation. This text consolidates two years of Douglass Taber's popular weekly online column, "Organic Chemistry Highlights" as featured on the organic-chemistry.org website and also features cumulative indices of all six volumes in this series, going back twelve years.


2020 ◽  
Vol 17 ◽  
Author(s):  
Samad Khaksar ◽  
Mandana Alipour ◽  
Zinatosadat Hossaini ◽  
Faramarz Rostami-Charati

Aims: Aims:The application of 3,5-Bis(trifluoromethyl) phenyl ammonium triflate(BFPAT) as a convenient and novel organocatalyst for the synthesis of quinoxalines. Background: Recently, ammonium triflate-based organocatalysts have been rapidly evolved, and most of them have been synthesized and utilized in several organic transformations. Objective: 1) introducing a new organocatalyst 2) introducing a practical method for the synthesis of quinoxalines 3) to overcome some problem in this method 4) using water as a green solvent. Method: A water solution (3 ml) of 1,2-dicarbonyl compounds (1 mmol) and aryl 1,2-diamines (1 mmol) was mixed with BFPAT (10 mol%), and the resulting mixture was stirred at rt for an appropriate time. Upon completion of the reaction, (monitored by TLC), the resultant was cooled with the ice bath, filtered and washed with ethanol and purified by recrystallization from hot ethanol to afford pure products. Result: A wide variety of quinoxaline derivatives was achieved by the reaction of various substituted o-phenylenediamines and 1,2-diketones in water. Conclusion: A simple and new ammonium triflate-based organocatalyst was shown to effectively promote the highly efficient synthesis of quinoxalines in water as a green reaction medium. Compared to prior studies, the substrate scope of the starting material was largely extended. In particular, the synthesis avoids the toxic metals in the products, which provides a green and practical method for organic synthesis. Other: In particular, the synthesis avoids the toxic metals in the products, which provides a green and practical method for organic synthesis.


Synthesis ◽  
2017 ◽  
Vol 50 (04) ◽  
pp. 711-722 ◽  
Author(s):  
Xiaodong Jia ◽  
Pengfei Li

tert-Butyl nitrite (TBN) is an important metal-free reagent that is widely applied in various organic transformations. Besides its traditional applications in nitrosation and diazotization, its ability to activate molecular oxygen to enable the initiation of radical reactions, including nitration, oximation, oxidation, and so on, has attracted extensively attention in the past decade. This review highlights recent advances in this field to promote further exploration of this versatile compound.1 Introduction2 Reactions Involving TBN2.1 Nitrosation2.2 Oximation2.3 Diazotization2.4 Nitration2.5 Oxidation2.6 Other Reactions3 Conclusion and Perspective


2020 ◽  
Vol 17 (8) ◽  
pp. 946-957
Author(s):  
Ravindra V. Kupwade

The chemistry of hypervalent iodine compounds has been experiencing considerable attention of organic chemists during the past few years. Hypervalent iodine reagents have found ubiquitous applications in organic synthesis because of their mild and highly chemoselective oxidizing properties, easy commercial availability, and environmental benign character. Along with oxidation of alcohol, they have also shown to be useful in number of organic transformations which include oxidative functionalization of carbonyl compounds, catalytic imidations, cyclization, oxidative coupling of phenols, amines and related compounds. Among various hypervalent iodine reagents, iodine-V compounds (λ5-iodanes) have attracted much attention in recent years. This review narrates the particular advances in iodine (V) reagents with special emphasis on the use of DMP in organic transformations.


2021 ◽  
Vol 03 (02) ◽  
pp. 146-154
Author(s):  
Sebastian B. Beil ◽  
Max von Delius

The chemo- and regioselective functionalization of fullerenes is a long-standing problem of organic synthesis. Over the past five years, this fundamental challenge has gained technological relevance, because studies on single bis-adduct isomers in new-generation solar cells have demonstrated that the widespread use of isomer mixtures leads to suboptimal power conversion efficiencies. Herein, we review recent work on supramolecular approaches for achieving chemo- and regioselective syntheses of multiply functionalized derivatives of C60.


2020 ◽  
Vol 24 (22) ◽  
pp. 2527-2554
Author(s):  
Trimurti L. Lambat ◽  
Paavan Kavi Param Gaitry Chopra ◽  
Sami H. Mahmood

Microwave Mediated Organic Synthesis (MMOS) is typical on the proficient heat shift carried out by dielectric heating, which in turn, is primarily dependent on the capability of the reagent or solvent to take up microwave energy. The employment of microwave energy has witnessed a fast expansion in the past two decades, with novel and pioneering applications in peptide and organic synthesis, material sciences, polymer chemistry, biochemical processes and nanotechnology. This review summarizes current MW- mediated catalytic reactions in use for the synthesis of a diversity of N-heterocycles by Multi- Component Reactions (MCRs) and a variety of miscellaneous reactions. In addition, the review addresses some aspects of the use of nanoparticles for a diversity of applications in microwave chemistry.


2020 ◽  
Vol 07 ◽  
Author(s):  
Chhanda Mukhopadhyay ◽  
Rammyani Pal

The environmental pollution and hazards have become the prime topic of concern in the twenty first century world and a warning to existing mankind. The researchers and chemists are also putting their way forward to combat the alarming situation across the world. In this context, reactions that are being carried out in water have attracted the attention from the past decade. Conventional organic synthesis relies profoundly on organic solvents for a huge number of reactions, mainly for dissolving the compounds and assisting chemical reactions, because a number of reagents and catalyst are either unsuited or immiscible in water. In spite of the constraints, substantial efforts have been dedicated to overcome the problems because water not only reduces the environmental hazards of organic synthesis, but also may benefit chemical reactions by delivering unforeseen selectivities and reactivities. The development of watercompatible/water-stable catalysts has emerged as a trouble shooter; eliciting a quantum leap in organic synthesis in water. Use of water has simplified the workup procedure too as organic compounds are typically insoluble in water, extraction with suitable organic solvents can separate the compounds from catalysts and the catalysts can also be separated and reused by centrifugation and filtration. This review deals with advances in catalytic methods under aqueous medium over the past few years.


Author(s):  
John L. Hutchison

Over the past five years or so the development of a new generation of high resolution electron microscopes operating routinely in the 300-400 kilovolt range has produced a dramatic increase in resolution, to around 1.6 Å for “structure resolution” and approaching 1.2 Å for information limits. With a large number of such instruments now in operation it is timely to assess their impact in the various areas of materials science where they are now being used. Are they falling short of the early expectations? Generally, the manufacturers’ claims regarding resolution are being met, but one unexpected factor which has emerged is the extreme sensitivity of these instruments to both floor-borne and acoustic vibrations. Successful measures to counteract these disturbances may require the use of special anti-vibration blocks, or even simple oil-filled dampers together with springs, with heavy curtaining around the microscope room to reduce noise levels. In assessing performance levels, optical diffraction analysis is becoming the accepted method, with rotational averaging useful for obtaining a good measure of information limits. It is worth noting here that microscope alignment becomes very critical for the highest resolution.In attempting an appraisal of the contributions of intermediate voltage HREMs to materials science we will outline a few of the areas where they are most widely used. These include semiconductors, oxides, and small metal particles, in addition to metals and minerals.


Sign in / Sign up

Export Citation Format

Share Document