Electron–phonon scattering effect on the lattice thermal conductivity of silicon nanostructures

2017 ◽  
Vol 19 (42) ◽  
pp. 28517-28526 ◽  
Author(s):  
Bo Fu ◽  
Guihua Tang ◽  
Yifei Li
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Thermal Transport ◽  
Lattice Thermal Conductivity ◽  
Phonon Scattering ◽  
Silicon Nanostructures ◽  
Nanoscale Thermal Transport ◽  
Scattering Effect ◽  
Solid Thin Films ◽  
Electron Phonon Scattering

The effect of electron–phonon scattering on the nanoscale thermal transport is investigated systematically in nanowires, solid thin films and nanoporous thin films by considering the phonon–phonon, phonon–boundary and electron–phonon scattering simultaneously.

scholarly journals Reduction of Lattice Thermal Conductivity in PbTe Induced by Artificially Generated Pores

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Jae-Yeol Hwang ◽  
Eun Sung Kim ◽  
Syed Waqar Hasan ◽  
Soon-Mok Choi ◽  
Kyu Hyoung Lee ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Pore Structure ◽  
Transport Properties ◽  
Thermoelectric Materials ◽  
Thermal Transport ◽  
Lattice Thermal Conductivity ◽  
Phonon Scattering ◽  
Phonon Modes ◽  
Thermal Transport Properties

Highly dense pore structure was generated by simple sequential routes using NaCl and PVA as porogens in conventional PbTe thermoelectric materials, and the effect of pores on thermal transport properties was investigated. Compared with the pristine PbTe, the lattice thermal conductivity values of pore-generated PbTe polycrystalline bulks were significantly reduced due to the enhanced phonon scattering by mismatched phonon modes in the presence of pores (200 nm–2 μm) in the PbTe matrix. We obtained extremely low lattice thermal conductivity (~0.56 W m−1 K−1at 773 K) in pore-embedded PbTe bulk after sonication for the elimination of NaCl residue.

Phonon scattering due to van der Waals forces in the lattice thermal conductivity of Bi2Te3 thin films

2015 ◽  
Vol 117 (1) ◽  
pp. 015103 ◽  
Author(s):  
Kyeong Hyun Park ◽  
Mohamed Mohamed ◽  
Zlatan Aksamija ◽  
Umberto Ravaioli
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Lattice Thermal Conductivity ◽  
Phonon Scattering ◽  
Van Der Waals ◽  
Van Der Waals Forces

scholarly journals Modeling of Thermoelectric Properties of Semi-Conductor Thin Films With Quantum and Scattering Effects

2006 ◽  
Vol 129 (4) ◽  
pp. 492-499 ◽  
Author(s):  
A. Bulusu ◽  
D. G. Walker
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Phonon Scattering ◽  
Quantum Effects ◽  
Effect Of Temperature ◽  
Fundamental Parameters ◽  
Scattering Effects ◽  
Electron Phonon Scattering

Several new reduced-scale structures have been proposed to improve thermoelectric properties of materials. In particular, superlattice thin films and wires should decrease the thermal conductivity, due to increased phonon boundary scattering, while increasing the local electron density of states for improved thermopower. The net effect should be increased ZT, the performance metric for thermoelectric structures. Modeling these structures is challenging because quantum effects often have to be combined with noncontinuum effects and because electronic and thermal systems are tightly coupled. The nonequilibrium Green’s function (NEGF) approach, which provides a platform to address both of these difficulties, is used to predict the thermoelectric properties of thin-film structures based on a limited number of fundamental parameters. The model includes quantum effects and electron-phonon scattering. Results indicate a 26–90 % decrease in channel current for the case of near-elastic, phase-breaking, electron-phonon scattering for single phonon energies ranging from 0.2 meV to 60 meV. In addition, the NEGF model is used to assess the effect of temperature on device characteristics of thin-film heterojunctions whose applications include thermoelectric cooling of electronic and optoelectronic systems. Results show the predicted Seebeck coefficient to be similar to measured trends. Although superlattices have been known to show reduced thermal conductivity, results show that the inclusion of scattering effects reduces the electrical conductivity leading to a significant reduction in the power factor (S2σ).

Thermal Transport in Few-Quintuple Bi2Te3 Thin Films and Nanoribbons

2011 ◽  
Author(s):  
Bo Qiu ◽  
Xiulin Ruan
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Molecular Dynamics ◽  
Temperature Dependence ◽  
Thermal Transport ◽  
Room Temperature ◽  
Phonon Scattering ◽  
Md Simulations ◽  
Boundary Scattering ◽  
Nanoporous Films

In this work, thermal conductivity of perfect and nanoporous few-quintuple Bi2Te3 thin films as well as nanoribbons with perfect and zig-zag edges is investigated using molecular dynamics (MD) simulations with Green-Kubo method. We find minimum thermal conductivity of perfect Bi2Te3 thin films with three quintuple layers (QLs) at room temperature, and we believe it originates from the interplay between inter-quintuple coupling and phonon boundary scattering. Nanoporous films and nanoribbons are studied for additional phonon scattering channels in suppressing thermal conductivity. With 5% porosity in Bi2Te3 thin films, the thermal conductivity is found to decrease by a factor of 4–6, depending on temperature, comparing to perfect single QL. For nanoribbons, width and edge shape are found to strongly affect the temperature dependence as well as values of thermal conductivity.

Effect of Parameters on Lattice Thermal Conductivity in Germanium Nanowires

2013 ◽  
Vol 832 ◽  
pp. 33-38 ◽  
Author(s):  
S.M. Mamand ◽  
M.S. Omar
Keyword(s):  
Thermal Conductivity ◽  
Low Temperatures ◽  
Lattice Thermal Conductivity ◽  
Phonon Scattering ◽  
Intrinsic Properties ◽  
Phonon Confinement ◽  
Germanium Nanowires ◽  
Transverse Modes ◽  
Experimental Values ◽  
Electron Phonon Scattering

Modified Callaway's theory was used to calculate lattice thermal conductivity (LTC) of Germanium nanowires. Results are compared to those of experimental values of the temperature dependence of LTC for nanowire diameters of 62, 19, and 15nm. In this calculation, both longitudinal and transverse modes are taken into account. Scattering of phonons is assumed to be by nanowire boundaries, imperfections, dislocations, electrons, and other phonons via both normal and Umklapp processes. Effect of parameters, phonon confinement and imperfections in limiting thermal conductivity for the nanowires under considerations are investigated. The suppression in thermal conductivity of these nanowires is arise from electron-phonon scattering and phonon-boundary scattering at low temperatures, while at high temperatures is due to imperfections and intrinsic properties.

scholarly journals First-Principles Study on Lattice Dynamics and Thermal Conductivity of Thermoelectric Intermetallics Fe3Al2Si3

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 388
Author(s):  
Naoki Sato ◽  
Yoshiki Takagiwa
Keyword(s):  
Thermal Conductivity ◽  
First Principles ◽  
Thermal Transport ◽  
Lattice Thermal Conductivity ◽  
Phonon Scattering ◽  
Microscopic Mechanism ◽  
Practical Applications ◽  
Scattering Rate ◽  
Fine Microstructure ◽  
Thermal Displacements

Thermoelectric materials have been expected as a critical underlying technology for developing an autonomous power generation system driven at near room temperature. For this sake, Fe3Al2Si3 intermetallic compound is a promising candidate, though its high lattice thermal conductivity is a bottleneck toward practical applications. Herein, we have performed the first-principles calculations to clarify the microscopic mechanism of thermal transport and establish effective ways to reduce the lattice thermal conductivity of Fe3Al2Si3. Our calculations show that the lowest-lying optical mode has a significant contribution from Al atom vibration. It should correspond to large thermal displacements Al atoms. However, these behaviors do not directly cause an increase of the 3-phonon scattering rate. The calculated lattice thermal conductivity shows a typical temperature dependence and moderate magnitude. From the calculated thermal conductivity spectrum and cumulative thermal conductivity, we can see that there is much room to reduce the lattice thermal conductivity. We can expect that heavy-element doping on Al site and controlling fine microstructure are effective strategies to decrease the lattice thermal conductivity. This work suggests useful information to manipulate the thermal transport of Fe3Al2Si3, which will make this material closer to practical use.

Phonon Transport in SiGe-Based Nanocomposites and Nanowires for Thermoelectric Applications

2015 ◽  
Vol 1735 ◽  
Author(s):  
M. Upadhyaya ◽  
Z. Aksamija
Keyword(s):  
Thermal Conductivity ◽  
Silicon Germanium ◽  
Thermal Transport ◽  
Lattice Thermal Conductivity ◽  
Phonon Scattering ◽  
Voronoi Tessellation ◽  
Phonon Transport ◽  
Interface Properties ◽  
Boltzmann Transport ◽  
Rough Interfaces

ABSTRACTSilicon-germanium (SiGe) superlattices (SLs) have been proposed for application as efficient thermoelectrics because of their low thermal conductivity, below that of bulk SiGe alloys. However, the cost of growing SLs is prohibitive, so nanocomposites, made by a ball-milling and sintering, have been proposed as a cost-effective replacement with similar properties. Lattice thermal conductivity in SiGe SLs is reduced by scattering from the rough interfaces between layers. Therefore, it is expected that interface properties, such as roughness, orientation, and composition, will play a significant role in thermal transport in nanocomposites and offer many additional degrees of freedom to control the thermal conductivity in nanocomposites by tailoring grain size, shape, and crystal angle distributions. We previously demonstrated the sensitivity of the lattice thermal conductivity in SLs to the interface properties, based on solving the phonon Boltzmann transport equation under the relaxation time approximation. Here we adapt the model to a broad range of SiGe nanocomposites. We model nanocomposite structures using a Voronoi tessellation to mimic the grains and their distribution in the nanocomposite and show excellent agreement with experimentally observed structures, while for nanowires we use the Monte Carlo method to solve the phonon Boltzmann equation. In order to accurately treat phonon scattering from a series of atomically rough interfaces between the grains in the nanocomposite and at the boundaries of nanowires, we employ a momentum-dependent specularity parameter. Our results show thermal transport in SiGe nanocomposites and nanowires is reduced significantly below their bulk alloy counterparts.

Sign in / Sign up

Export Citation Format

Share Document