scholarly journals Controlled chemical synthesis of CaO2 particles coated with polyethylene glycol: characterization of crystallite size and oxygen release kinetics

RSC Advances ◽  
2018 ◽  
Vol 8 (1) ◽  
pp. 91-101 ◽  
Author(s):  
Arghavan Rastinfard ◽  
Masoumeh Haghbin Nazarpak ◽  
Fathollah Moztarzadeh
Keyword(s):  
Polyethylene Glycol ◽  
Chemical Synthesis ◽  
Release Rate ◽  
Release Kinetics ◽  
Second Phase ◽  
Shrinking Core Model ◽  
Oxygen Release ◽  
Shrinking Core ◽  
Burst Phase

The oxygen release pattern of CaO2 nanoparticles was biphasic: an initial burst phase for the first 24 hours followed by a descending release rate for three days. The oxygen release rate in the second phase mainly depended on the shrinking-core model for CaO2 hydrolysis.

scholarly journals Understanding the Phenomenon of Copper Ions Release from Copper-Modified TFC Membranes: A Mathematical and Experimental Methodology Using Shrinking Core Model

Nanomaterials ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 1130
Author(s):  
Rodrigo Quezada ◽  
Yurieth Quintero ◽  
José Cristian Salgado ◽  
Humberto Estay ◽  
Andreina García
Keyword(s):  
Copper Ions ◽  
Release Kinetics ◽  
Experimental Methodology ◽  
Core Model ◽  
Polymerization Process ◽  
Dissolution Process ◽  
Shrinking Core Model ◽  
Ion Release ◽  
Copper Species ◽  
Shrinking Core

Type of metal and metal-oxide NPs added to modify Thin-Film Composites Reverse Osmosis Membranes (TFC-RO) can alter their anti-biofouling properties by changing the dissolution process. The development of a mathematical model can facilitate the selection of these NPs. This work consists of a mathematical and experimental methodology to understand copper-based NPs dissolution of three copper species incorporated into TFC-RO membranes: Cu-NPs, CuO-NPs and Cu-Oligomer complexes formed in situ during the polymerization process. Biocidal capacity of copper species into the membrane was evaluated using colony forming unit method (CFU) over E. coli. In addition, copper ion release kinetics for both NPs and modified membranes were determined. A model based on the shrinking core model (SCM) was validated and applied to determine the limiting rate step in the dissolution process and simulate the ion release kinetics. Fitted curves reached a good adjustment with the experimental data, demonstrating the SCM can be applied to predict ion release process for copper-based NPs in suspension and the modified membranes. All membranes reached similar inhibition rate >50%, however, differences in the dissolution level of copper-based NPs in membrane were noted, suggesting a dual-type effect that defined the copper toxicity into the membrane, associated to the dissolution capacity and ROS production.

ROLE OF ADDED PHOSPHOGYPSUM AND HUMIC ACIDS IN THE KINETIC RELEASE OF SALT FROM SALT AFFECTED SOIL (SALINE – SODIC)

2020 ◽  
pp. 15-27
Keyword(s):  
Electrical Conductivity ◽  
Humic Acids ◽  
Release Rate ◽  
Release Kinetics ◽  
Sodium Adsorption Ratio ◽  
Salt Affected Soil ◽  
Two Factors ◽  
Dissolved Ions ◽  
Kinetic Release

In order to study the effect of phosphogypsum and humic acids in the kinetic release of salt from salt-affected soil, a laboratory experiment was conducted in which columns made from solid polyethylene were 60.0 cm high and 7.1 cm in diameter. The columns were filled with soil so that the depth of the soil was 30 cm inside the column, the experiment included two factors, the first factor was phosphogypsum and was added at levels 0, 5, 10 and 15 tons ha-1 and the second-factor humic acids were added at levels 0, 50, 100 and 150 kg ha-1 by mixing them with the first 5 cm of column soil and one repeater per treatment. The continuous leaching method was used by using an electrolytic well water 2.72 dS m-1. Collect the leachate daily and continue the leaching process until the arrival of the electrical conductivity of the filtration of leaching up to 3-5 dS m-1. The electrical conductivity and the concentration of positive dissolved ions (Ca, Mg, Na) were estimated in leachate and the sodium adsorption ratio (SAR) was calculated. The results showed that the best equation for describing release kinetics of the salts and sodium adsorption ratio in soil over time is the diffusion equation. Increasing the level of addition of phosphogypsum and humic acids increased the constant release velocity (K) of salts and the sodium adsorption ratio. The interaction between phosphogypsum and humic acids was also affected by the constant release velocity of salts and the sodium adsorption ratio. The constant release velocity (K) of the salts and the sodium adsorption ratio at any level of addition of phosphogypsum increased with the addition of humic acids. The highest salts release rate was 216.57 in PG3HA3, while the lowest rate was 149.48 in PG0HA0. The highest release rate of sodium adsorption ratio was 206.09 in PG3HA3, while the lowest rate was 117.23 in PG0HA0.

TBE in Sweden

2020 ◽  
Keyword(s):  
Genetic Characterization ◽  
Immunoglobulin M ◽  
Enzyme Linked Immunosorbent Assay ◽  
Second Phase ◽  
Serum Samples ◽  
Tick Borne Encephalitis ◽  
Specific Immunoglobulin ◽  
Tick Borne Encephalitis Virus ◽  
First Time

Tick-borne encephalitis virus (TBEV) was isolated for the first time in Sweden in 1958 (from ticks and from 1 tick-borne encephalitis [TBE] patient).1 In 2003, Haglund and colleagues reported the isolation and antigenic and genetic characterization of 14 TBEV strains from Swedish patients (samples collected 1991–1994).2 The first serum sample, from which TBEV was isolated, was obtained 2–10 days after onset of disease and found to be negative for anti-TBEV immunoglobulin M (IgM) by enzyme-linked immunosorbent assay (ELISA), whereas TBEV-specific IgM (and TBEV-specific immunoglobulin G/cerebrospinal fluid [IgG/CSF] activity) was demonstrated in later serum samples taken during the second phase of the disease.

scholarly journals Toward Physicochemical and Rheological Characterization of Different Injectable Hyaluronic Acid Dermal Fillers Cross-Linked with Polyethylene Glycol Diglycidyl Ether

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 948
Author(s):  
Nicola Zerbinati ◽  
Sabrina Sommatis ◽  
Cristina Maccario ◽  
Maria Chiara Capillo ◽  
Giulia Grimaldi ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Polyethylene Glycol ◽  
Biological Activities ◽  
Diglycidyl Ether ◽  
Dermal Filler ◽  
Cross Linking ◽  
Matrix Structure ◽  
Dermal Fillers ◽  
Rheological Characterization

(1) Background: Injectable hyaluronic acid (HA) dermal fillers are used to restore volume, hydration and skin tone in aesthetic medicine. HA fillers differ from each other due to their cross-linking technologies, with the aim to increase mechanical and biological activities. One of the most recent and promising cross-linkers is polyethylene glycol diglycidyl ether (PEGDE), used by the company Matex Lab S.p.A., (Brindisi, Italy) to create the HA dermal filler PEGDE family. Over the last few years, several studies have been performed to investigate the biocompatibility and biodegradability of these formulations, but little information is available regarding their matrix structure, rheological and physicochemical properties related to their cross-linking technologies, the HA content or the degree of cross-linking. (2) Methods: Seven different injectable HA hydrogels were subjected to optical microscopic examination, cohesivity evaluation and rheological characterization in order to investigate their behavior. (3) Results: The analyzed cross-linked dermal fillers showed a fibrous “spiderweb-like” matrix structure, with each medical device presenting different and peculiar rheological features. Except for HA non cross-linked hydrogel 18 mg/mL, all showed an elastic and cohesive profile. (4) Conclusions: The comparative analysis with other literature works makes a preliminary characterization of these injectable medical devices possible.

scholarly journals Correction to An Unreacted Shrinking Core Model Serves for Predicting Combustion Rates of Organic Additives in Clay Bricks

2021 ◽  
Vol 35 (5) ◽  
pp. 4616-4616
Author(s):  
Florian Wesenauer ◽  
Christian Jordan ◽  
Mario Pichler ◽  
Aron Frei ◽  
Mudassar Azam ◽  
...  
Keyword(s):  
Core Model ◽  
Shrinking Core Model ◽  
Organic Additives ◽  
Clay Bricks ◽  
Shrinking Core

scholarly journals Synthesis, Quantification, and Characterization of Fatty Acid Amides from In Vitro and In Vivo Sources

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2543
Author(s):  
Ruidong Ni ◽  
Suzeeta Bhandari ◽  
Perry R. Mitchell ◽  
Gabriela Suarez ◽  
Neel B. Patel ◽  
...  
Keyword(s):  
Drosophila Melanogaster ◽  
Fatty Acid ◽  
Apis Mellifera ◽  
Chemical Synthesis ◽  
Acid Amide ◽  
Fatty Acid Amides ◽  
Fatty Acid Amide

Fatty acid amides are a diverse family of underappreciated, biologically occurring lipids. Herein, the methods for the chemical synthesis and subsequent characterization of specific members of the fatty acid amide family are described. The synthetically prepared fatty acid amides and those obtained commercially are used as standards for the characterization and quantification of the fatty acid amides produced by biological systems, a fatty acid amidome. The fatty acid amidomes from mouse N18TG2 cells, sheep choroid plexus cells, Drosophila melanogaster, Bombyx mori, Apis mellifera, and Tribolium castaneum are presented.

Fabrication of polyethylene glycol hydrogels with enhanced swelling; loading capacity and release kinetics

2021 ◽  
Author(s):  
Qandeel Zahra ◽  
Muhammad Usman Minhas ◽  
Samiullah Khan ◽  
Pao-Chu Wu ◽  
Muhammad Suhail ◽  
...  
Keyword(s):  
Polyethylene Glycol ◽  
Release Kinetics ◽  
Loading Capacity
Sign in / Sign up

Export Citation Format

Share Document