Gas-templating of hierarchically structured Ni–Co–P for efficient electrocatalytic hydrogen evolution

2017 ◽  
Vol 5 (16) ◽  
pp. 7564-7570 ◽  
Author(s):  
Peili Zhang ◽  
Hong Chen ◽  
Mei Wang ◽  
Yong Yang ◽  
Jian Jiang ◽  
...  

A hierarchically structured Ni–Co–P film exhibits remarkable activity toward the hydrogen evolution reaction with a current density of −10 mA cm−2 at −30 mV vs. the RHE.

2020 ◽  
Vol 56 (56) ◽  
pp. 7702-7705 ◽  
Author(s):  
Lei Guo ◽  
Xue Bai ◽  
Hui Xue ◽  
Jing Sun ◽  
Tianshan Song ◽  
...  

A 3D hierarchical Bi-doped CoP nanoflowers electrocatalyst is developed based on a MOF self-sacrifice strategy. The 3% Bi/CoP catalyst delivers a current density of 10 mA cm−2 at low overpotentials of 122 mV in alkaline electrolyte and 150 mV in acidic electrolyte.


2018 ◽  
Vol 15 (2) ◽  
pp. 178-187
Author(s):  
Lixin Wang ◽  
Peipei Zhang ◽  
Lei Bai ◽  
Lei Cao ◽  
Jing Du ◽  
...  

Background: Ni/rGO composite electrode has been fabricated by facile supergravity electrodeposition as a low-cost catalyst for efficient hydrogen evolution in alkaline media. In this paper, the electrodeposition time is the main research variable. When the electrodeposition time is 100 minutes, the Ni/rGO-100 catalyst manifests the highest electrocatalytic activity toward the hydrogen evolution reaction (HER). In 1.0 M NaOH solution, the overpotential at a current density of 100 mA cm-2, Tafel slope and charge transfer resistance of Ni/rGO-100 catalyst is 184 mV, 77 mV dec-1 and 4.173 Ω, respectively. In addition, Ni/rGO-100 catalyst shows a long-term durability at a constant current density of 100 mA cm-2 for 10 h. The outstanding HER electrocatalytic performance of the Ni/rGO-100 is mainly related to the synergetic combination of Ni and rGO, as well as the enlarged exposure of catalytically active sites and improved transport of electrons arising from the good conductivity of graphene. Method: In a classic experiment, GO was prepared by modified Hummers method. The Ni/rGO composite electrodes were prepared by supergravity electrodeposition, which has been reported in detail in our published paper. Firstly, a ø10 cm × 2 cm Ni foam circle was cleaned sequentially in HCl solution (15%), acetone and DI water for 5 min with ultrasonication to be used as a cathode. And a pure nickel pipe was used as anode. The Ni/rGO composite cathodes were electrodeposited in a blackish green plating bath which contained 350 g L-1 Ni(NH2SO3)2·6H2O, 10g L-1 NiCl2·6H2O, 30 g L-1 NH4Cl , 1.0 g L-1 GO colloidal solution with different electrodeposition time, 10min, 30min, 60min, 80min, 100min, respectively. The pH value of the plating bath is 3.5-3.8. The above five electrodes were respectively denominated as Ni/rGO-10, Ni/rGO-30, Ni/rGO-60, Ni/rGO-80, Ni/rGO-100. All composite electrodes were performed under the strength of the supergravity with G=350 g at a current density of 3 A dm-2 at 318 K. Afterwards the Ni foam coated with Ni/rGO hybrid was taken out of the reaction vessel, followed by washing with deionized water to remove physical adsorption residua, and then dried at 80°C. Results: In this paper, the electrodeposition time is the main research variable. When the electrodeposition time is 100 minutes, the Ni/rGO-100 catalyst manifests the highest electrocatalytic activity toward the hydrogen evolution reaction (HER). In 1.0 M NaOH solution, the overpotential at a current density of 100 mA cm-2, Tafel slope and charge transfer resistance of Ni/rGO-100 catalyst is 184 mV, 77 mV dec-1 and 4.173 Ω, respectively. In summary, we have synthesized a class of composite electrodes (Ni/rGO) for HER in alkaline solution by electrodeposition under supergravity field. We studied the effect of electrodeposition time on electrode performance in detail. With the increase of electrodeposition time, the number of active sites is enlarged provided by the electrode. When the electrodeposition time is 100 min, we fabricate the best electrode (Ni/rGO-100). The η100, Tafel slope and charge transfer resistance of Ni/rGO-100 is 184 mV, 77 mV dec-1 and 4.173 Ω, respectively. The introduction of graphene and supergravity field plays a key role in improving the performance of the electrodes. This work is a pivotal part of the development of Ni/rGO as a non-precious HER catalyst for green energy field.


2018 ◽  
Vol 6 (32) ◽  
pp. 15558-15563 ◽  
Author(s):  
Dewen Wang ◽  
Ce Han ◽  
Zhicai Xing ◽  
Qun Li ◽  
Xiurong Yang

Owing to the unique structure and synergistic effect between MoNi and CoMoO3, the MoNi/CoMoO3/NF exhibits high hydrogen evolution activity which requires a low overpotential of only 18 mV to deliver a current density of 10 mA cm−2.


2021 ◽  
Vol 50 (39) ◽  
pp. 14001-14008
Author(s):  
Xiaoqiang Du ◽  
Guangyu Ma ◽  
Yanhong Wang ◽  
Xinghua Han ◽  
Xiaoshuang Zhang

The Ni3S2@NiOOH/NF catalyst with a core–shell structure exhibits a relatively low overpotential of 79 mV for HER at a current density of 10 mA cm−2, which is one of the best catalytic activities reported so far.


2018 ◽  
Vol 47 (45) ◽  
pp. 16305-16312 ◽  
Author(s):  
Xiaoqiang Du ◽  
Hui Su ◽  
Xiaoshuang Zhang

Using Co3O4@Co3S4-24 h as a bifunctional water splitting catalyst, an overpotential of ∼300 mV is obtained at a very low cell voltage of 1.53 V with a current density of 10 mA cm−2 in 1.0 M KOH.


2021 ◽  
Author(s):  
Minmin Wang ◽  
Mengke Zhang ◽  
Wenwu Song ◽  
Weiting Zhong ◽  
Xunyue Wang ◽  
...  

A CoMo2S4/Ni3S2 heterojunction is prepared with an overpotential of only 51 mV to drive a current density of 10 mA cm−2 in 1 M KOH solution and ∼100% of the potential remains in the ∼50 h chronopotentiometric curve at 10 mA cm−2.


Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 662 ◽  
Author(s):  
Guangsheng Liu ◽  
Kunyapat Thummavichai ◽  
Xuefeng Lv ◽  
Wenting Chen ◽  
Tingjun Lin ◽  
...  

Molybdenum disulfide (MoS2) has been universally demonstrated to be an effective electrocatalytic catalyst for hydrogen evolution reaction (HER). However, the low conductivity, few active sites and poor stability of MoS2-based electrocatalysts hinder its hydrogen evolution performance in a wide pH range. The introduction of other metal phases and carbon materials can create rich interfaces and defects to enhance the activity and stability of the catalyst. Herein, a new defect-rich heterogeneous ternary nanocomposite consisted of MoS2, NiS and reduced graphene oxide (rGO) are synthesized using ultrathin αNi(OH)2 nanowires as the nickel source. The MoS2/rGO/NiS-5 of optimal formulation in 0.5 M H2SO4, 1.0 M KOH and 1.0 M PBS only requires 152, 169 and 209 mV of overpotential to achieve a current density of 10 mA cm−2 (denoted as η10), respectively. The excellent HER performance of the MoS2/rGO/NiS-5 electrocatalyst can be ascribed to the synergistic effect of abundant heterogeneous interfaces in MoS2/rGO/NiS, expanded interlayer spacings, and the addition of high conductivity graphene oxide. The method reported here can provide a new idea for catalyst with Ni-Mo heterojunction, pH-universal and inexpensive hydrogen evolution reaction electrocatalyst.


Crystals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1040 ◽  
Author(s):  
Getachew Solomon ◽  
Raffaello Mazzaro ◽  
Vittorio Morandi ◽  
Isabella Concina ◽  
Alberto Vomiero

Molybdenum sulfide (MoS2) has emerged as a promising catalyst for hydrogen evolution applications. The synthesis method mainly employed is a conventional hydrothermal method. This method requires a longer time compared to other methods such as microwave synthesis methods. There is a lack of comparison of the two synthesis methods in terms of crystal morphology and its electrochemical activities. In this work, MoS2 nanosheets are synthesized using both hydrothermal (HT-MoS2) and advanced microwave methods (MW-MoS2), their crystal morphology, and catalytical efficiency towards hydrogen evolution reaction (HER) were compared. MoS2 nanosheet is obtained using microwave-assisted synthesis in a very short time (30 min) compared to the 24 h hydrothermal synthesis method. Both methods produce thin and aggregated nanosheets. However, the nanosheets synthesized by the microwave method have a less crumpled structure and smoother edges compared to the hydrothermal method. The as-prepared nanosheets are tested and used as a catalyst for hydrogen evolution results in nearly similar electrocatalytic performance. Experimental results showed that: HT-MoS2 displays a current density of 10 mA/cm2 at overpotential (−280 mV) compared to MW-MoS2 which requires −320 mV to produce a similar current density, suggesting that the HT-MoS2 more active towards hydrogen evolutions reaction.


Sign in / Sign up

Export Citation Format

Share Document