Dual crosslinked polyamidoxime/alginate sponge for robust and efficient uranium adsorption from aqueous solution

2020 ◽  
Vol 44 (45) ◽  
pp. 19445-19449
Author(s):  
Caina Han ◽  
Yaru Yue ◽  
Xin Xu ◽  
Dong Cai ◽  
Zhongjie Liu ◽  
...  

A facile, low-cost, organic solvent-free fabrication strategy is developed to prepare a seawater-stable sponge adsorbent from a water-soluble precursor for highly efficient extraction of uranium from seawater and uranium-containing wastewater.

RSC Advances ◽  
2014 ◽  
Vol 4 (110) ◽  
pp. 64747-64755 ◽  
Author(s):  
Xuefeng Xu ◽  
Man Wang ◽  
Yanyan Pei ◽  
Changchun Ai ◽  
Liangjie Yuan

The micro/nano-structure composite SiO2@Ag/AgCl was employed as a low cost photocatalyst for the degradation of RhB in aqueous solution under visible light irradiation, which exhibited excellent photocatalytic performance and stability.


2019 ◽  
Vol 43 (13) ◽  
pp. 5219-5227 ◽  
Author(s):  
Sharanabasava D. Hiremath ◽  
Ram U. Gawas ◽  
Starlaine C. Mascarenhas ◽  
Anasuya Ganguly ◽  
Mainak Banerjee ◽  
...  

A water-soluble TPE-based AIEgen (TPE-diBuS) was developed for organic-solvent-free detection of Al3+ ions and its wash-free cell imaging. The TPE-diBuS-Al ensemble was used for the detection of F− ions and DNA tracking.


RSC Advances ◽  
2014 ◽  
Vol 4 (90) ◽  
pp. 48777-48782 ◽  
Author(s):  
Mingyu Guan ◽  
Chao Wang ◽  
Jingyu Zhang ◽  
Yingsheng Zhao

A highly efficient and practical organic solvent-free Cu(OAc)2/DMAP/TEMPO catalyst system for the selective aerobic oxidation of benzylic and allylic alcohols to aldehydes and phenones under an ambient air atmosphere was reported.


2016 ◽  
Vol 45 (37) ◽  
pp. 14516-14519 ◽  
Author(s):  
G. Papp ◽  
G. Ölveti ◽  
H. Horváth ◽  
Á. Kathó ◽  
F. Joó

Water-soluble cis-mer-[IrH2Cl(mtppms)3] selectively dehydrogenated formic acid with a TOF of 298 000 h−1, a final pressure of 140 bar, and a TONmax of 674 000.


RSC Advances ◽  
2015 ◽  
Vol 5 (75) ◽  
pp. 61179-61183 ◽  
Author(s):  
Abdol R. Hajipour ◽  
Yasaman Heidari ◽  
Gholamreza Kozehgary

Ammonium salts based on nicotine proved to be highly efficient and recyclable catalysts for the synthesis of cyclic carbonates from epoxides and CO2 without the utilization of any organic solvent and any additives.


2021 ◽  
Vol 5 (7) ◽  
pp. 188
Author(s):  
Chen Fang ◽  
Haiqing Xiao ◽  
Tianyue Zheng ◽  
Hua Bai ◽  
Gao Liu

Cycling stability is a key challenge for application of silicon (Si)-based composite anodes as the severe volume fluctuation of Si readily leads to fast capacity fading. The binder is a crucial component of the composite electrodes. Although only occupying a small amount of the total composite mass, the binder has major impact on the long-term electrochemical performance of Si-based anodes. In recent years, water-based binders including styrene-butadiene rubber (SBR) and carboxymethyl cellulose (CMC) have attracted wide research interest as eco-friendly and low-cost alternatives for the conventional poly(vinylidene difluoride) (PVDF) binder in Si anodes. In this study, Si-based composite anodes are fabricated by simple solid mixing of the active materials with subsequent addition of SBR and CMC binders. This approach bypasses the use of toxic and expansive organic solvents. The factors of binder, silicon, and graphite materials have been systematically investigated. It is found that the retained capacities of the anodes are more than 440 mAh/g after 400 cycles. These results indicate that organic solvent free process is a facile strategy for producing high performance silicon/graphite composite anodes.


2007 ◽  
Vol 121-123 ◽  
pp. 113-116
Author(s):  
Yi Yang Zhao ◽  
X. Li ◽  
C. Wang ◽  
L.J. Li

The effects of an organic solvent on the electrospinning of water-soluble polyacrylamide with ultrahigh molecular weight were investigated. An organic solvent, DMF, was introduced to the polyacrylamide aqueous solution and subsequently, transparent spinning solutions were obtained. The spinning solution was electrospun at the voltage of 10 kV and the electrospun products were examined by scanning electron microscopy (SEM). Results indicated that all the electrospinning products including colloidal particles, beaded fibers and smooth fibers were fabricated in the DMF/H2O bi-component solvent and the morphology of electrospun products changed from smooth fiber to beaded fiber with the increasing amount of DMF used.


2015 ◽  
Vol 51 (81) ◽  
pp. 15067-15070 ◽  
Author(s):  
Belete B. Beyene ◽  
Sandeep B. Mane ◽  
Chen-Hsiung Hung

CoTPPS is an efficient electrocatalyst for H2 generation from neutral phosphate buffer solution. It features quantitative Faradaic efficiency with a TOF of ∼1.83 s−1 and a TON of 1.9 × 104 mol of H2 per mole of catalyst at an applied potential of −1.29 V (vs. SHE).


Sign in / Sign up

Export Citation Format

Share Document