In situ thermal behavior of resistance drift in GeTe and Ge2Sb2Te5 nanowires via Raman thermometry

2020 ◽  
Vol 8 (32) ◽  
pp. 11032-11041
Author(s):  
Sungjin Park ◽  
Taeok Kim ◽  
Soobin Hwang ◽  
Dambi Park ◽  
Min Ahn ◽  
...  
Keyword(s):  
Thermal Behavior ◽  
Time Dependent

The time-dependent resistance drift in GeTe and Ge2Sb2Te5 (GST) nanowires is investigated via Raman thermometry.

In Situ Tests on Creep Behavior of Rock Mass with Joint or Shearing Zone in Foundation of Large-Scale Hydroelectric Projects

2004 ◽  
Vol 261-263 ◽  
pp. 1097-1102 ◽  
Author(s):  
Jian Liu ◽  
Xia Ting Feng ◽  
Xiu Li Ding ◽  
Huo Ming Zhou
Keyword(s):  
Rock Mass ◽  
Creep Behavior ◽  
Large Scale ◽  
Time Dependent ◽  
Three Gorges Project ◽  
Three Gorges ◽  
The Three Gorges ◽  
The Three Gorges Project

The time-dependent behavior of rock mass, which is generally governed by joints and shearing zones, is of great significance for engineering design and prediction of long-term deformation and stability. In situ creep test is a more effective method than laboratory test in characterizing the creep behavior of rock mass with joint or shearing zone due to the complexity of field conditions. A series of in situ creep tests on granite with joint at the shiplock area of the Three-Gorges Project and basalt with shearing zone at the right abutment of the Xiluodu Project were performed in this study. Based on the test results, the stress-displacement-time responses of the joints and basalt are analyzed, and their time-dependent constitutive model and model coefficients are given, which is crucial for the design to prevent the creep deformations of rock masses from causing the failure of the operation of the shiplock gate at the Three-Gorges Project and long-term stability of the Xiluodu arc dam.

Determination of the Internal Electric Field in the Electrooptic Active Layer of Multilayer Polymer Stacks

1997 ◽  
Vol 488 ◽  
Author(s):  
S. Grossmann ◽  
T. Weyrauch ◽  
W. Haase
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Time Dependent ◽  
Polymer Interfaces ◽  
Internal Electric Field ◽  
Inhomogeneous Distribution ◽  
Time Dependent Behaviour ◽  
Dependent Behaviour

AbstractWe report on a method to investigate the inhomogeneous distribution of an electric dc field in multilayer polymer stacks. In situ electroabsorption (EA) measurements are applied in order to estimate the local electric fields in double layer polymer films. The observed time dependent behaviour is compared with a model equivalent circuit. The results indicate that besides the relation of ohmic resistivities and capacities of the different polymer layers in the investigated systems also the influence of the electric properties of polymer/electrode and polymer/polymer interfaces must be considered.

scholarly journals A review of airflow rate estimation techniques for natural ventilation in buildings

2021 ◽  
Author(s):  
Miguel Chen Austin ◽  
Dafni Mora ◽  
Denis Bruneau ◽  
Alain Sempey
Keyword(s):  
Thermal Behavior ◽  
Pressure Difference ◽  
Natural Ventilation ◽  
Airflow Rate ◽  
Empirical Equations ◽  
Friction Characteristics ◽  
Estimation Techniques ◽  
Thermal Buoyancy ◽  
Modeling Techniques

As natural ventilation involves local and global interactions, the estimation of these interactions can be performed by many approaches. Such approaches, rather more experimental and numerical than analytical, often require a great deal of instrumentation and equipment, which results in higher demands on project budget and funding.  The present work is devoted to comprehending the natural ventilation concept, and to assess the existing experimental techniques already implemented for past researchers in the estimation of the ventilation airflow rate due to the wind and thermal buoyancy effects. A brief review of modeling techniques is also presented. This will provide a strong theoretical grasp of the natural ventilation process as part of the main elements in the thermal behavior of buildings. Ultimately, these bases are intended to help choose the most suitable techniques to estimate the natural ventilation airflow rate. The adequate benefit-to-budget technique appears to be the airtightness tests (blower door tests), since empirical Equations relating the airflow directly to the pressure difference in the building for both cases: infiltrations (openings closed) and openings opened, can be obtained.  Also, the location of the leakages can be identified without complications, and this technique has the potential to estimate in situ the airflow capacity and friction characteristics of the openings.

scholarly journals Inclusion of In-Situ Velocity Measurements into the UCSD Time-Dependent Tomography to Constrain and Better-Forecast Remote-Sensing Observations

Solar Physics ◽  
2010 ◽  
Vol 265 (1-2) ◽  
pp. 245-256 ◽  
Author(s):  
B. V. Jackson ◽  
P. P. Hick ◽  
M. M. Bisi ◽  
J. M. Clover ◽  
A. Buffington
Keyword(s):  
Remote Sensing ◽  
Time Dependent ◽  
Velocity Measurements

scholarly journals Thermal Stability of Octadecyltrichlorosilane and Perfluorooctyltriethoxysilane Monolayers on SiO2

Nanomaterials ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 210
Author(s):  
Xiangdong Yang ◽  
Haitao Wang ◽  
Peng Wang ◽  
Xuxin Yang ◽  
Hongying Mao
Keyword(s):  
Thermal Stability ◽  
Thermal Behavior ◽  
Work Function ◽  
Photoelectron Spectroscopy ◽  
Vacuum Annealing ◽  
Moderate Temperature ◽  
Ultraviolet Photoelectron Spectroscopy ◽  
X Ray ◽  
Thermal Stability Of

Using in situ ultraviolet photoelectron spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS) measurements, the thermal behavior of octadecyltrichlorosilane (OTS) and 1H, 1H, 2H, and 2H-perfluorooctyltriethoxysilane (PTES) monolayers on SiO2 substrates has been investigated. OTS is thermally stable up to 573 K with vacuum annealing, whereas PTES starts decomposing at a moderate temperature between 373 K and 423 K. Vacuum annealing results in the decomposition of CF3 and CF2 species rather than desorption of the entire PTES molecule. In addition, our UPS results reveal that the work function (WF)of OTS remains the same after annealing; however WF of PTES decreases from ~5.62 eV to ~5.16 eV after annealing at 573 K.

scholarly journals In Situ Monitoring of Drying Process of Masonry Walls

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6190
Author(s):  
Łukasz Cieślikiewicz ◽  
Piotr Łapka ◽  
Radosław Mirowski
Keyword(s):  
Energy Consumption ◽  
Moisture Content ◽  
Thermal Behavior ◽  
Specific Energy Consumption ◽  
Masonry Wall ◽  
In Situ Monitoring ◽  
Drying Process ◽  
Final State ◽  
The Mean

The in situ hygro-thermal behavior of a wet masonry wall during its drying process is presented in this paper. The considered wall is a part of a basement of a historic building that was subjected to renovation works. The building is located in the City of Łowicz (Poland). The drying process was implemented by applying the thermo-injection method and a novel prototype of the drying device used for this method. The dedicated acquisition system was developed to in situ monitor parameters of the drying process. The air temperature and relative humidity in various locations in the basement, temperatures and moisture contents at several points of the wet wall as well as the electrical parameters of the drying device were registered. Based on variations of the monitored parameters, the hygro-thermal behavior of the wall during drying was studied. After 6 days of drying, the wall temperature in the drying zone was increased to approximately 40–55 °C, while the moisture content was reduced to the mean level of 3.76% vol. (2.35% wt.). These wall parameters allowed for effective impregnation of the wall with the hydrophobic silicone micro-emulsion, which created horizontal and vertical waterproofing. Moreover, the specific energy consumption during the drying process defined as energy consumption divided by the mean volumetric moisture content drop (MC) between the initial and final state in the wall and by the length of the dried wall section was estimated to be 11.08 kWh/MC%/m.

Sign in / Sign up

Export Citation Format

Share Document