Effect of growth phase on the subsequent growth kinetics of psychrotrophic bacteria of raw milk origin

2003 ◽  
Vol 56 (1) ◽  
pp. 35-38 ◽  
Author(s):  
Michael T Rowe ◽  
George Dunstall ◽  
David Kilpatrick ◽  
G Brian Wisdom
Author(s):  
Shiro Fujishiro ◽  
Harold L. Gegel

Ordered-alpha titanium alloys having a DO19 type structure have good potential for high temperature (600°C) applications, due to the thermal stability of the ordered phase and the inherent resistance to recrystallization of these alloys. Five different Ti-Al-Ga alloys consisting of equal atomic percents of aluminum and gallium solute additions up to the stoichiometric composition, Ti3(Al, Ga), were used to study the growth kinetics of the ordered phase and the nature of its interface.The alloys were homogenized in the beta region in a vacuum of about 5×10-7 torr, furnace cooled; reheated in air to 50°C below the alpha transus for hot working. The alloys were subsequently acid cleaned, annealed in vacuo, and cold rolled to about. 050 inch prior to additional homogenization


1998 ◽  
Vol 536 ◽  
Author(s):  
E. M. Wong ◽  
J. E. Bonevich ◽  
P. C. Searson

AbstractColloidal chemistry techniques were used to synthesize ZnO particles in the nanometer size regime. The particle aging kinetics were determined by monitoring the optical band edge absorption and using the effective mass model to approximate the particle size as a function of time. We show that the growth kinetics of the ZnO particles follow the Lifshitz, Slyozov, Wagner theory for Ostwald ripening. In this model, the higher curvature and hence chemical potential of smaller particles provides a driving force for dissolution. The larger particles continue to grow by diffusion limited transport of species dissolved in solution. Thin films were fabricated by constant current electrophoretic deposition (EPD) of the ZnO quantum particles from these colloidal suspensions. All the films exhibited a blue shift relative to the characteristic green emission associated with bulk ZnO. The optical characteristics of the particles in the colloidal suspensions were found to translate to the films.


2016 ◽  
Vol 58 (5) ◽  
pp. 418-421
Author(s):  
Fatma Ünal ◽  
Ahmet Topuz

RSC Advances ◽  
2021 ◽  
Vol 11 (30) ◽  
pp. 18493-18499
Author(s):  
Sergio Sánchez-Martín ◽  
S. M. Olaizola ◽  
E. Castaño ◽  
E. Urionabarrenetxea ◽  
G. G. Mandayo ◽  
...  

Impact of deposition parameters, microstructure and growth kinetics analysis of ZnO grown by Aerosol-assisted Chemical Vapor Deposition (AACVD).


Author(s):  
Tarun V Kamath ◽  
Naomi Klickstein ◽  
Caitlin Commins ◽  
Analiese R Fernandes ◽  
Derek H Oakley ◽  
...  

Abstract The accumulation of tau aggregates throughout the human brain is the hallmark of a number of neurodegenerative conditions classified as tauopathies. Increasing evidence shows that tau aggregation occurs in a “prion-like” manner, in which a small amount of misfolded tau protein can induce other, naïve tau proteins to aggregate. Tau aggregates have been found to differ structurally among different tauopathies. Recently, however, we have suggested that tau oligomeric species may differ biochemically among individual patients with sporadic Alzheimer disease, and have also showed that the bioactivity of the tau species, measured using a cell-based bioassay, also varied among individuals. Here, we adopted a live-cell imaging approach to the standard cell-based bioassay to explore further whether the kinetics of aggregation also differentiated these patients. We found that aggregation can be observed to follow a consistent pattern in all cases, with a lag phase, a growth phase, and a plateau phase, which each provide quantitative parameters by which we characterize aggregation kinetics. The length of the lag phase and magnitude of the plateau phase are both dependent upon the concentration of seeding-competent tau, the relative enrichment of which differs among patients. The slope of the growth phase correlates with morphological differences in the tau aggregates, which may be reflective of underlying structural differences. This kinetic assay confirms and refines the concept of heterogeneity in the characteristics of tau proteopathic seeds among individuals with Alzheimer’s disease and is a method by which future studies may characterize longitudinal changes in tau aggregation and the cellular processes which may influence these changes.


Author(s):  
Phillip Mark Rodger ◽  
Caroline Montgomery ◽  
Giovanni Costantini ◽  
Alison Rodger

The formation and stability of diphenylalanine fibres are studied by combining molecular dynamics simulations with microscopy and spectroscopy experiments, quantitatively detailing their morphology, energetics and growth kinetics.


Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 259 ◽  
Author(s):  
Pablo A. Ruiz-Trabolsi ◽  
Julio Cesar Velázquez ◽  
Carlos Orozco-Álvarez ◽  
Rafael Carrera-Espinoza ◽  
Jorge A. Yescas-Hernández ◽  
...  

Boride layers are typically used to combat the wear and corrosion of metals. For this reason, to improve our knowledge of the boriding process, this research studied the effect of the size of the treated material on the kinetics of the growth of the boride layers obtained during a solid diffusion process. The purpose was to elucidate how the layers’ growth kinetics could be affected by the size of the samples since, as the amount of matter increases, the amount of energy necessary to make the process occur also increases. Furthermore, the level of activation energy seems to change as a function of the sample size, although it is considered an intrinsic parameter of each material. Six cylindrical samples with different diameters were exposed to the boriding process for three different exposure times (1.5, 3, and 5 h). The treatment temperatures used were 900, 950, and 1000 °C for each size and duration of treatment. The results show that the layer thickness increased not only as a function of the treatment conditions but also as a function of the sample diameter. The influence of the sample size on the growth kinetics of the boride layers is clear, because the growth rate increased even though the treatment conditions (time and temperature) remained constant.


Sign in / Sign up

Export Citation Format

Share Document