scholarly journals Influence of fissure inclination and confining pressure on the local behaviour of natural clays

2019 ◽  
Vol 92 ◽  
pp. 03004
Author(s):  
Erika Tudisco ◽  
Claudia Vitone ◽  
Cristina Mondello ◽  
Gioacchino Viggiani ◽  
Stephen A. Hall ◽  
...  
Keyword(s):  
Volumetric Strain ◽  
Confining Pressure ◽  
Image Correlation ◽  
Compression Tests ◽  
Confinement Pressure ◽  
Santa Croce ◽  
Deformation Processes ◽  
Natural Clays ◽  
Scaly Clay

In this experimental study the influence of fissuring orientation and confinement pressure on the mechanical behaviour of natural clays is investigated. The tested material, the scaly clay from Santa Croce di Magliano (south of Italy), is characterised by an intense network of pre-existing fissures of single orientation. Several plane strain compression tests have been conducted, under different confinement pressures (i.e., from 50 to 600 kPa), on specimens having fissures with vertical, medium and horizontal inclination. Digital Image Correlation has been used to follow the deformation processes of the specimens throughout the tests by measuring incremental shear and volumetric strain maps. The results showed a strong coupling between the total confinement and the fissure inclination, that is controlling both the onset and the development of the patterns of the localisation processes. The new results have been compared with previous ones carried out on the same material without confinement. The comparison shed light on the role of total confinement that becomes particularly relevant from certain levels of pressures and fissuring inclination.

scholarly journals Localised strain in fissured clays: the combined effect of fissure orientation and confining pressure

2021 ◽  
Author(s):  
Erika Tudisco ◽  
Claudia Vitone ◽  
Cristina Mondello ◽  
Gioacchino Viggiani ◽  
Stefanos Athanasopoulos ◽  
...  
Keyword(s):  
Stress Level ◽  
Confining Pressure ◽  
Important Variable ◽  
Combined Effect ◽  
Image Correlation ◽  
Complex Deformation ◽  
Santa Croce ◽  
Consistent Picture ◽  
Scaly Clay ◽  
Deformation Patterns

AbstractThis paper reports the main results of an experimental study on the mechanics of intensely fissured natural clays, extending our previous studies on scaly clay from Santa Croce di Magliano. While previous work focused on the influence of the orientation of fissures with respect to the loading direction, the present investigation specifically explores an additional, important variable: the stress level. The combined effect of fissure orientation and confining pressure was studied by setting up a large campaign of plane strain compression experiments, in which different combinations of these two variables were tested. Conventional global stress–strain measurements were complemented by measuring displacement and strain fields through two-dimensional digital image correlation. Such rich information provided a clear and consistent picture of the interplay between fissure orientation and stress level and revealed complex deformation patterns, which cannot be ignored for a proper interpretation of the material response.

scholarly journals Microcracking and the failure of polycrystalline ice under triaxial compression

1992 ◽  
Vol 38 (128) ◽  
pp. 65-76 ◽  
Author(s):  
P. Kalifa ◽  
G. Ouillon ◽  
P. Duval
Keyword(s):  
Triaxial Compression ◽  
Peak Stress ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Strain History ◽  
Compression Tests ◽  
Brittle Transition ◽  
Polycrystalline Ice ◽  
Strain Components

AbstractTriaxial and uniaxial compression tests have been carried out at –10°C on granular ice in order to study the role of microcracking on failure in the ductile-brittle transition zone. In the triaxial tests, the effect of confining pressure and strain rate on the crack population, as well as on strength and strain at the peak stress, was investigated. In the uniaxial tests, we measured the evolution of elastic and non-elastic components of deformation with the stress-strain history. The concept of effective stress, with a single scalar damage variable, was used to calculate the effect of microcracking on the strain components.

Effect of particle size and strain conditions on the strength of crushed basalt

1983 ◽  
Vol 20 (4) ◽  
pp. 706-717 ◽  
Author(s):  
Mosaid Al-Hussaini
Keyword(s):  
Particle Size ◽  
Stress Level ◽  
Level Density ◽  
Triaxial Compression ◽  
Volumetric Strain ◽  
Confining Pressure ◽  
Strain Diagram ◽  
Compression Tests ◽  
Cohesionless Soils ◽  
Lower Shear

This paper describes the results of an investigation carried out to study the influence of particle size, stress level, density, method of consolidation, and strain conditions on the strength and compressibility of crushed basalt. All specimens were prepared at medium or high density, consolidated isotropically or under K0 consolidation, and sheared under effective confining pressure ranging from 443 to 2297 kPa. The material used in the test program had a straight line grain size distribution with maximum particle size ranges from 0.63 to 76.2 mm and minimum particle size equivalent to No. 30 U.S. standard sieve size:The tests indicated that an increase in the particle size (i.e., gradation) increases the strength and decreases the axial and the volumetric strain at failure. The study indicated further that the crushed basalt under triaxial compression has a lower shear strength than when sheared under plane strain conditions. Particles crushed were significantly influenced by the stress level and gradation and to a lesser degree by density of material. Keywords: cohesionless soils, density (mass/volume), shear tests, stress–strain diagram, compression tests, rockfill dams.

scholarly journals Microcracking and the failure of polycrystalline ice under triaxial compression

1992 ◽  
Vol 38 (128) ◽  
pp. 65-76 ◽  
Author(s):  
P. Kalifa ◽  
G. Ouillon ◽  
P. Duval
Keyword(s):  
Triaxial Compression ◽  
Peak Stress ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Strain History ◽  
Compression Tests ◽  
Brittle Transition ◽  
Polycrystalline Ice ◽  
Strain Components

AbstractTriaxial and uniaxial compression tests have been carried out at –10°C on granular ice in order to study the role of microcracking on failure in the ductile-brittle transition zone. In the triaxial tests, the effect of confining pressure and strain rate on the crack population, as well as on strength and strain at the peak stress, was investigated. In the uniaxial tests, we measured the evolution of elastic and non-elastic components of deformation with the stress-strain history. The concept of effective stress, with a single scalar damage variable, was used to calculate the effect of microcracking on the strain components.

scholarly journals Confinement effects for rubberised concrete in tubular steel cross-sections under combined loading

2021 ◽  
Vol 21 (2) ◽  
Author(s):  
A. Mujdeci ◽  
D. V. Bompa ◽  
A. Y. Elghazouli
Keyword(s):  
Axial Compression ◽  
Cross Section ◽  
Cross Sections ◽  
Image Correlation ◽  
Combined Loading ◽  
Test Results ◽  
Compression Tests ◽  
Confinement Effects ◽  
Rubber Content ◽  
Dependent Modification

AbstractThis paper describes an experimental investigation into confinement effects provided by circular tubular sections to rubberised concrete materials under combined loading. The tests include specimens with 0%, 30% and 60% rubber replacement of mineral aggregates by volume. After describing the experimental arrangements and specimen details, the results of bending and eccentric compression tests are presented, together with complementary axial compression tests on stub-column samples. Tests on hollow steel specimens are also included for comparison purposes. Particular focus is given to assessing the confinement effects in the infill concrete as well as their influence on the axial–bending cross-section strength interaction. The results show that whilst the capacity is reduced with the increase in the rubber replacement ratio, an enhanced confinement action is obtained for high rubber content concrete compared with conventional materials. Test measurements by means of digital image correlation techniques show that the confinement in axial compression and the neutral axis position under combined loading depend on the rubber content. Analytical procedures for determining the capacity of rubberised concrete infilled cross-sections are also considered based on the test results as well as those from a collated database and then compared with available recommendations. Rubber content-dependent modification factors are proposed to provide more realistic representations of the axial and flexural cross-section capacities. The test results and observations are used, in conjunction with a number of analytical assessments, to highlight the main parameters influencing the behaviour and to propose simplified expressions for determining the cross-section strength under combined compression and bending.

scholarly journals Compression and Strain Predictive Models in Non-Structural Recycled Concretes Made from Construction and Demolition Wastes

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3177
Author(s):  
Evelio Teijón-López-Zuazo ◽  
Jorge López-Rebollo ◽  
Luis Javier Sánchez-Aparicio ◽  
Roberto Garcia-Martín ◽  
Diego Gonzalez-Aguilera
Keyword(s):  
Compressive Strength ◽  
Predictive Models ◽  
Unconfined Compressive Strength ◽  
Image Correlation ◽  
Peak Strain ◽  
Compression Tests ◽  
Maximum Peak ◽  
3D Digital Image Correlation ◽  
Granulometric Analysis ◽  
Physical And Chemical

This work aims to investigate different predictive models for estimating the unconfined compressive strength and the maximum peak strain of non-structural recycled concretes made up by ceramic and concrete wastes. The extensive experimental campaign carried out during this research includes granulometric analysis, physical and chemical analysis, and compression tests along with the use of the 3D digital image correlation as a method to estimate the maximum peak strain. The results obtained show that it is possible to accurately estimate the unconfined compressive strength for both types of concretes, as well as the maximum peak strain of concretes made up by ceramic waste. The peak strain for mixtures with concrete waste shows lower correlation values.

MECHANICAL CHARACTERIZATION OF MATERIALS AND DIAGNOSIS OF STRUCTURES BY INVERSE ANALYSES: SOME INNOVATIVE PROCEDURES AND APPLICATIONS

2014 ◽  
Vol 11 (03) ◽  
pp. 1343002 ◽  
Author(s):  
GIULIO MAIER ◽  
VLADIMIR BULJAK ◽  
TOMASZ GARBOWSKI ◽  
GIUSEPPE COCCHETTI ◽  
GIORGIO NOVATI
Keyword(s):  
Structural Analysis ◽  
Digital Image Correlation ◽  
Residual Stresses ◽  
Mechanical Characterization ◽  
Image Correlation ◽  
Alkali Silica Reaction ◽  
Compression Tests ◽  
Material Models ◽  
Characterization Of Materials

A survey is presented herein of some recent research contributions to the methodology of inverse structural analysis based on statical tests for diagnosis of possibly damaged structures and for mechanical characterization of materials in diverse industrial environments. The following issues are briefly considered: identifications of parameters in material models and of residual stresses on the basis of indentation experiments; mechanical characterization of free-foils and laminates by cruciform and compression tests and digital image correlation measurements; diagnosis, both superficially and in depth, of concrete dams, possibly affected by alkali-silica-reaction or otherwise damaged.

Mechanical behaviour of powders using a medium pressure flexible boundary cubical triaxial tester

2003 ◽  
Vol 217 (3) ◽  
pp. 233-241 ◽  
Author(s):  
F Li ◽  
V M Puri
Keyword(s):  
Shear Modulus ◽  
Mechanical Behaviour ◽  
Triaxial Compression ◽  
Three Dimensional ◽  
Volumetric Strain ◽  
Confining Pressure ◽  
Alumina Powder ◽  
Medium Pressure ◽  
Mean Pressure ◽  
Confining Pressures

A medium pressure (<21 MPa) flexible boundary cubical triaxial tester was designed to measure the true three-dimensional response of powders. In this study, compression behaviour and strength of a microcrystalline cellulose powder (Avicel® PH102), a spray-dried alumina powder (A16SG), and a fluid-bed-granulated silicon nitride based powder (KY3500) were measured. To characterize the mechanical behaviour, three types of triaxial stress paths, that is, the hydrostatic triaxial compression (HTC), the conventional triaxial compression (CTC), and the constant mean pressure triaxial compression (CMPTC) tests were performed. The HTC test measured the volumetric response of the test powders under isostatic pressure from 0 to 13.79MPa, during which the three powders underwent a maximum volumetric strain of 40.8 per cent for Avicel® PH102, 30.5 per cent for A16SG, and 33.0 per cent for KY3500. The bulk modulus values increased 6.4-fold from 57 to 367MPa for Avicel® PH102, 3.7-fold from 174 to 637 MPa for A16SG, and 8.1-fold from 74 to 597MPa for KY3500, when the isotropic stress increased from 0.69 to 13.79 MPa. The CTC and CMPTC tests measured the shear response of the three powders. From 0.035 to 3.45MPa confining pressure, the shear modulus increased 28.7-fold from 1.6 to 45.9MPa for Avicel® PH102, 35-fold from 1.7 to 60.5MPa for A16SG, and 28.5-fold from 1.5 to 42.8MPa for KY3500. In addition, the failure stresses of the three powders increased from 0.129 to 4.41 MPa for Avicel® PH102, 0.082 to 3.62 MPa for A16SG, and 0.090 to 4.66MPa for KY3500, respectively, when consolidation pressure increased from 0.035 to 3.45MPa. In addition, the shear modulus and failure stress values determined from the CTC test at 2.07, 2.76, and 3.45MPa confining pressures are consistently greater than those from the CMPTC test at the same constant mean pressures. This observation demonstrates the influence of stress paths on material properties. The CTT is a useful tool for characterizing the three-dimensional response of powders and powder mixtures.

scholarly journals Quantitative 3D imaging of partially saturated granular materials under uniaxial compression

2021 ◽  
Author(s):  
Marius Milatz ◽  
Nicole Hüsener ◽  
Edward Andò ◽  
Gioacchino Viggiani ◽  
Jürgen Grabe
Keyword(s):  
Granular Materials ◽  
Uniaxial Compression ◽  
Water Clusters ◽  
Local Strain ◽  
Confining Pressure ◽  
Mechanical Effect ◽  
Compression Tests ◽  
Initial Water ◽  
Interfacial Areas ◽  
Membrane Effects

AbstractGauging the mechanical effect of partial saturation in granular materials is experimentally challenging due to the very low suctions resulting from large pores. To this end, a uniaxial (zero radial stress) compression test may be preferable to a triaxial one where confining pressure and membrane effects may erase the contribution of this small suction; however, volume changes are challenging to measure. This work resolves this limitation by using X-ray imaging during in situ uniaxial compression tests on Hamburg Sand and glass beads at three different initial water contents, allowing a suction-dependent dilation to be brought to the light. The acquired tomography volumes also allow the development of air–water and solid–water interfacial areas, water clusters and local strain fields to be measured at the grain scale. These measurements are used to characterise pertinent micro-scale quantities during shearing and to relate them to the measured macroscopic response. The new and well-controlled data acquired during this experimental campaign are hopefully a useful contribution to the modelling efforts—to this end they are shared with the community.

Sign in / Sign up

Export Citation Format

Share Document