scholarly journals Study on microstructure and thermal conductivity of semi-solid die casting aluminum alloy

2021 ◽  
Vol 268 ◽  
pp. 01076
Author(s):  
Zengrong Hu ◽  
Xiaonan Wang ◽  
Xiaming Chen ◽  
Pengcheng Huan ◽  
Weihua Li ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Aluminum Alloy ◽  
Die Casting ◽  
Casting Process ◽  
Mechanical And Thermal Properties ◽  
Thin Wall ◽  
Mechanical Stirring ◽  
Die Casting Process ◽  
Casting Aluminum ◽  
Semi Solid

In order to improve the comprehensive properties of casting aluminum, and to fulfill the requirements of forming thin wall fins for communication products, mechanical stirring was employed to prepare the semi-solid aluminum alloy AlSi8. communication products were produced by the semi-solid die casting process. The microstructure and mechanical and thermal properties were studied. The test results show that the microstructure of semi-solid die-casting samples changes from dendrite to globular microstructure, and the average tensile strength, elongation and thermal conductivity are 220MPa, 7% and 170 W/(m*K), respectively, which is significantly higher than that of the common die-casting samples. It was proved that the semi-solid die casting technology can be used in actual production and improve the products quality.

Development of Semi-Solid Die Casting Product Design and Die Design Technology for Aluminium Alloy Clamp

2016 ◽  
Vol 256 ◽  
pp. 334-339 ◽  
Author(s):  
Song Chen ◽  
Fan Zhang ◽  
You Feng He ◽  
Da Quan Li ◽  
Qiang Zhu
Keyword(s):  
Product Design ◽  
Die Casting ◽  
Casting Process ◽  
Die Design ◽  
Thick Wall ◽  
Thin Wall ◽  
Gating System ◽  
Cross Sectional ◽  
Die Casting Process ◽  
Semi Solid

Semi-solid slurry has significantly higher viscosity than liquid metal. This character of fluidity makes product design and die design, such as gating system, overflow and venting system, be different between these two die casting processes. In the present paper, taking a clamp product as an example, analyses the product optimization and die design by comparing the experimental and computational numerical simulation results. For the clamp, product structure is designed to be suitable for characters of SSM die casting process. The gating system is designed to be uniform variation of thickness, making the cross-sectional area uniformly reduce from the biscuit to the gate. This design ensures semi-solid metal slurry to fill die cavity from thick wall to thin wall. Gate position is designed at the thickest location, the gate shape of semi-solid die casting is set to be much bigger than traditional liquid casting. A good filling behaviour can be achieved by aforementioned all these design principles and it will be helpful to the intensification of pressure feeding after filling.

Tensile Properties of Semi-Solid Die Cast AC4C Aluminum Alloy

2014 ◽  
Vol 680 ◽  
pp. 11-14
Author(s):  
Ke Ren Shi ◽  
Sirikul Wisutmethangoon ◽  
Jessada Wannasin ◽  
Thawatchai Plookphol
Keyword(s):  
Heat Treatment ◽  
Tensile Strength ◽  
Aluminum Alloy ◽  
Die Casting ◽  
Casting Process ◽  
Al Alloy ◽  
Die Cast ◽  
Die Casting Process ◽  
Semi Solid ◽  
Strength And Ductility

In this study, semi-solid Al-Mg-Si alloy (AC4C) was produced by using the Gas Induced Semi-Solid (GISS) die casting process. The tensile strength and ductility of the semi-solid die cast Al alloy (GISS-DC) after T6 heat treatment were investigated and compared with those of the conventional liquid die casting (CLDC). The microstructures of GISS-DC and CLDC observed by an optical microscopy were presented. The ultimate tensile strength (UTS) and yield strength (0.2% YS) of GISS-DC are compatible with those of the CLDC. However, the GISS-DC has better ductility than the CLDC, this may be due to the smaller and more globular primary α-Al phase and rounder shaped-Si particle microstructures presented in the GISS-DC. Common shrinkage pores and defects were also observed by SEM from the fracture surfaces of both alloys.

Effects of Solid Fractions in a Slurry Die Casting Process on Defects of 7075 Aluminum Alloy

2015 ◽  
Vol 752-753 ◽  
pp. 7-10 ◽  
Author(s):  
Waraporn Jumpol ◽  
Jessada Wannasin ◽  
Somjai Janudom ◽  
Rungsinee Canyook ◽  
Thawatchai Plookphol ◽  
...  
Keyword(s):  
Aluminum Alloy ◽  
Solid Fraction ◽  
Die Casting ◽  
Casting Process ◽  
7075 Aluminum Alloy ◽  
Die Casting Process ◽  
Semi Solid

The effects of Gas Induced Semi-Solid (GISS) in the slurry die casting process on defects of 7075 aluminum alloy were studied, different initial solid fractions with 10, 15, and 20 sec of rheocasting time were investigated. The results showed that the percentage of porosity in semi-solid die casting was smaller than in the liquid die casting. In terms of the initial solid fraction in 7075 aluminum alloy, it was found that the defects were found when the initial solid fraction was high. In addition.

Development of Semi-Solid Die Casting Process Technology for Aluminium Alloy Clamp

2016 ◽  
Vol 850 ◽  
pp. 642-648 ◽  
Author(s):  
Song Chen ◽  
Da Quan Li ◽  
Fan Zhang ◽  
You Feng He ◽  
Qiang Zhu ◽  
...  
Keyword(s):  
Aluminum Alloy ◽  
Die Casting ◽  
Structure Optimization ◽  
Casting Process ◽  
New Product ◽  
Product Structure ◽  
Die Design ◽  
Design Parameters ◽  
Die Casting Process ◽  
Semi Solid

Compared with traditional liquid and solid processing methods, semi-solid die casting process can apparently overcome shrinkage cavity and porosity defects in castings and high deformation resistance and high residual stress shortcomings in forging parts. Semi-solid die casting process with advantages such as high efficiency and low cost, will become the optimal process for high quality automobile parts. In this study, using the clamp as an example, the author introduced product structure optimization and die design for semi-solid die-casting process of aluminum alloy in a new product development.The Computer Aided Engineering technology was applied to the product structure optimization according to the stress analysis. The optimal mold structure, including cavity layout, gating system, overflow and vent systems, were confirmed based on the die design criteria for traditional die casting, combining with the characteristics of semi-solid forming and the simulation results. The semi-solid aluminum alloy clamp parts with excellent performances were finally developed successfully by means of product structure optimization, die design, parameters optimization of die casting process, and the mechanical properties test of products.The existing parts were optimized to make them more suitable for semi-solid die casting processing. In addition, a reasonable die design specially for semi solid processing was an important guarantee for a successful semi solid product applied in industry. Computer numerical simulation was applied in product structure design for semi-solid die casting, die design, die-casting process optimization and other aspects, to shorten the development cycle of new product, reduce cost and improve efficiency.

Microstructure Evolution and Mechanical Properties of Rheoformed YL112 Aluminum Alloy

2008 ◽  
Vol 141-143 ◽  
pp. 163-168 ◽  
Author(s):  
Xiang Jie Yang ◽  
Hong Min Guo
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Shape Factor ◽  
Die Casting ◽  
Equivalent Diameter ◽  
Uniform Microstructure ◽  
Casting Aluminum Alloy ◽  
Casting Aluminum ◽  
Semi Solid ◽  
Secondary Solidification

Rheo-die casting (RDC) based on LSPSF (low superheat pouring with a shear field) rheocasting process has been exploited. In case of secondary die casting aluminum alloy YL112, LSPSF allowed for preparation of sound semi-solid slurry in 15-20s that fully meet the production rate of HPDC, the primary α-Al exhibiting a mean equivalent diameter of 70 μm and shape factor of 0.93, without any entrapped eutectic. Compared to conventional HPDC, RDC improves microstructures in castings. Secondary solidification of semi-solid slurry takes place uniformly throughout the entire cavity, producing an extremely fine and uniform microstructure. The experimental results show the RDC 380 alloy has much improved integrity and mechanical properties, particularly elongation, and heat treatment can be used to enhance the mechanical properties.

Numerical Simulation on the Filling Process of Rheological Die Casting and Forming Defects Analysis

2012 ◽  
Vol 192-193 ◽  
pp. 293-298 ◽  
Author(s):  
Fan Zhang ◽  
Nan Nan Song ◽  
Jun Zhang ◽  
Yong Lin Kang ◽  
Qiang Zhu
Keyword(s):  
Numerical Simulation ◽  
Die Casting ◽  
A356 Alloy ◽  
Casting Process ◽  
Solid Particles ◽  
Filling Process ◽  
Die Casting Process ◽  
Defects Analysis ◽  
Semi Solid ◽  
Forming Defects

According to semi-solid slurry rheological behavior, an apparent viscosity model of A356 alloy developed based on the Carreau model was established to simulate filling process of rheo-diecasting about automobile shock absorber parts and to compare with conventional liquid filling process. Numerical simulation results showed that the filling process of rheo-diecasting was smooth but difficult to splash, which reduced the tendency of the alloy oxidation and inclusion. Meanwhile, a certain percentage of the primary solid particles precipitated before filling and solidification shrinkage of semi-solid slurry were small. This benefited to reduce or eliminate shrinkage defects of the castings. Compared with conventional liquid die casting process, rheo-diecasting process had unique advantages in reducing the internal defects and improving mechanical properties of castings.

Multiphase modelling of the transient flow for Sn-15Pb and 357.0 alloys in semi-solid die casting process

2020 ◽  
Vol 278 ◽  
pp. 116534
Author(s):  
Wenying Qu ◽  
Daquan Li ◽  
Fan Zhang ◽  
Min Luo ◽  
Xiaogang Hu ◽  
...  
Keyword(s):  
Transient Flow ◽  
Die Casting ◽  
Casting Process ◽  
Die Casting Process ◽  
Semi Solid
Sign in / Sign up

Export Citation Format

Share Document