Homogenization of 3D metamaterial particle arrays for oblique propagation via a point-dipole analysis

2020 ◽  
Vol 91 (2) ◽  
pp. 20902
Author(s):  
Theodosios Karamanos ◽  
Theodoros Zygiridis ◽  
Nikolaos Kantartzis
Keyword(s):  
First Principles ◽  
Electromagnetic Waves ◽  
Three Dimensional ◽  
Point Dipole ◽  
Effective Parameters ◽  
Realistic Case ◽  
Oblique Propagation ◽  
Dipole Analysis ◽  
Anisotropic Metamaterial

A rigorous technique for the consistent calculation of the effective parameters of infinite three-dimensional metamaterial particle arrays in the realistic case of oblique wave propagation, is presented in this paper. The extracted polarizabilities of the consisting scatterer and the numerically retrieved wavenumber for the obliquely propagating electromagnetic waves are systematically inserted into a properly modified first-principles homogenization technique, thus leading to the characterization of the effective medium. Finally, the proposed methodology is applied to two popular, anisotropic metamaterial resonators.

Energetics of AlN Epitaxial Wetting Layers on SiC (0001)

1996 ◽  
Vol 449 ◽  
Author(s):  
R. Di Felice ◽  
J. E. Northrup ◽  
J. Neugebauer
Keyword(s):  
First Principles ◽  
Three Dimensional ◽  
Layer Growth ◽  
Layer By Layer ◽  
Two Dimensional ◽  
Charge Accumulation ◽  
Wetting Layer ◽  
Interface Charge ◽  
Wetting Layers

ABSTRACTWe present a first-principles characterization of the initial stages of formation of AlN films on c-plane SiC substrates. Studying the competition between two-dimensional films and three-dimensional islands as a function of Al and N abundances, we find that a two-dimensional film can wet the surface in N-rich conditions. Ordered layer-by-layer growth can proceed to some extent on this wetting layer, and is improved by the formation of an atomically mixed interface which eliminates interface charge accumulation. Our results indicate that the stable AlN films grow in the (0001) orientation on the Si-terminated SiC(0001) substrate.

Synthesis and characterization of robust three-dimensional chiral metal sulfates

RSC Advances ◽  
2014 ◽  
Vol 4 (92) ◽  
pp. 50435-50442 ◽  
Author(s):  
J. N. Behera ◽  
Joydeep Bhattacharjee ◽  
Satoshi Horike ◽  
Subba R. Marri ◽  
Prem P. Dahiya
Keyword(s):  
Thermal Decomposition ◽  
High Temperature ◽  
First Principles ◽  
Three Dimensional ◽  
Ammonium Ion ◽  
Synthesis And Characterization ◽  
First Principles Calculations ◽  
X Ray Diffraction ◽  
X Ray

Chiral three-dimensional Mg(ii) and Mn(ii) sulfates have been synthesized, well characterized and studied from first-principles calculations. High temperature X-ray diffraction, thermogravimetric analysis and DFT calculations reveal that the structures of both the compounds remain intact even after the thermal decomposition of the ammonium ion.

scholarly journals Diverse Novel Stable Traveling Wave Solutions of the Advanced or Voltage Spectrum of Electrified Transmission Through Fractional Non-linear Model

2021 ◽  
Vol 9 ◽  
Author(s):  
Chen Yue ◽  
Li Wu ◽  
A. A. Mousa ◽  
Dianchen Lu ◽  
Mostafa M. A. Khater
Keyword(s):  
Traveling Wave ◽  
Electromagnetic Waves ◽  
Linear Time ◽  
Three Dimensional ◽  
Traveling Wave Solutions ◽  
Evolutionary Equations ◽  
Time Space ◽  
Different Types ◽  
Non Linear

This study analyzes the exact solutions of the compliance fractional non-linear time–space telegraph (FNLTST) equation by Oliver Heaviside in 1880 via three non-applied analytical schemes. The solutions obtained to define the advanced or voltage spectrum of electrified transmission with day-to-day distance from electrical communication or the application of electromagnetic waves. Many new solutions are obtained, and three distinct styles of drawings are introduced (two-dimensional, three-dimensional, and density plots). Furthermore, stability characterization of the solutions is addressed using the properties of the Hamiltonian system. The originality of this study is shown by matching the solutions built with solutions produced previously using various analytical methods. Overall, the success of the three systems demonstrates their quality, intensity, and capacity to cope with several different types of non-linear evolutionary equations.

Characterization of photosystem II with the atomic-force microscope

1992 ◽  
Vol 50 (2) ◽  
pp. 1146-1147
Author(s):  
Kathleen M. Marr ◽  
Mary K. Lyon
Keyword(s):  
Photosystem Ii ◽  
Atomic Force Microscope ◽  
Three Dimensional ◽  
Biologically Active ◽  
Atomic Force ◽  
Freeze Etching ◽  
Image Averaging ◽  
Oxygen Evolving ◽  
Averaging Techniques

Photosystem II (PSII) is different from all other reaction centers in that it splits water to evolve oxygen and hydrogen ions. This unique ability to evolve oxygen is partly due to three oxygen evolving polypeptides (OEPs) associated with the PSII complex. Freeze etching on grana derived insideout membranes revealed that the OEPs contribute to the observed tetrameric nature of the PSIl particle; when the OEPs are removed, a distinct dimer emerges. Thus, the surface of the PSII complex changes dramatically upon removal of these polypeptides. The atomic force microscope (AFM) is ideal for examining surface topography. The instrument provides a topographical view of individual PSII complexes, giving relatively high resolution three-dimensional information without image averaging techniques. In addition, the use of a fluid cell allows a biologically active sample to be maintained under fully hydrated and physiologically buffered conditions. The OEPs associated with PSII may be sequentially removed, thereby changing the surface of the complex by one polypeptide at a time.

convergent-beam diffraction from surfaces

1987 ◽  
Vol 45 ◽  
pp. 30-33
Author(s):  
J. A. Eades ◽  
A. E. Smith ◽  
D. F. Lynch
Keyword(s):  
Reciprocal Lattice ◽  
Three Dimensional ◽  
Grazing Incidence ◽  
Three Dimensions ◽  
Plane Figure ◽  
Transmission Electron ◽  
Convergent Beam ◽  
Beam Patterns ◽  
Beam Diffraction

It is quite simple (in the transmission electron microscope) to obtain convergent-beam patterns from the surface of a bulk crystal. The beam is focussed onto the surface at near grazing incidence (figure 1) and if the surface is flat the appropriate pattern is obtained in the diffraction plane (figure 2). Such patterns are potentially valuable for the characterization of surfaces just as normal convergent-beam patterns are valuable for the characterization of crystals.There are, however, several important ways in which reflection diffraction from surfaces differs from the more familiar electron diffraction in transmission.GeometryIn reflection diffraction, because of the surface, it is not possible to describe the specimen as periodic in three dimensions, nor is it possible to associate diffraction with a conventional three-dimensional reciprocal lattice.

Construction of plastic contact deformation maps on ceramics: a case study on aluminum nitride

1996 ◽  
Vol 54 ◽  
pp. 636-637
Author(s):  
D. L. Callahan
Keyword(s):  
Plastic Deformation ◽  
Aluminum Nitride ◽  
Mechanical Response ◽  
Three Dimensional ◽  
Bright Field Image ◽  
Perfectly Plastic ◽  
Contrast Analysis ◽  
Deformation Patterns

Modern polishing, precision machining and microindentation techniques allow the processing and mechanical characterization of ceramics at nanometric scales and within entirely plastic deformation regimes. The mechanical response of most ceramics to such highly constrained contact is not predictable from macroscopic properties and the microstructural deformation patterns have proven difficult to characterize by the application of any individual technique. In this study, TEM techniques of contrast analysis and CBED are combined with stereographic analysis to construct a three-dimensional microstructure deformation map of the surface of a perfectly plastic microindentation on macroscopically brittle aluminum nitride.The bright field image in Figure 1 shows a lg Vickers microindentation contained within a single AlN grain far from any boundaries. High densities of dislocations are evident, particularly near facet edges but are not individually resolvable. The prominent bend contours also indicate the severity of plastic deformation. Figure 2 is a selected area diffraction pattern covering the entire indentation area.

Characterization of a monolayer graphitic structure

1994 ◽  
Vol 52 ◽  
pp. 760-761
Author(s):  
X. Lin ◽  
X. K. Wang ◽  
V. P. Dravid ◽  
J. B. Ketterson ◽  
R. P. H. Chang
Keyword(s):  
Three Dimensional ◽  
Single Layer ◽  
Synthesis Process ◽  
Graphitic Structure ◽  
Positive Gaussian Curvature ◽  
Graphitic Sheet ◽  
Structural And Electronic Properties ◽  
New Material ◽  
Hexagonal Network

For small curvatures of a graphitic sheet, carbon atoms can maintain their preferred sp2 bonding while allowing the sheet to have various three-dimensional geometries, which may have exotic structural and electronic properties. In addition the fivefold rings will lead to a positive Gaussian curvature in the hexagonal network, and the sevenfold rings cause a negative one. By combining these sevenfold and fivefold rings with sixfold rings, it is possible to construct complicated carbon sp2 networks. Because it is much easier to introduce pentagons and heptagons into the single-layer hexagonal network than into the multilayer network, the complicated morphologies would be more common in the single-layer graphite structures. In this contribution, we report the observation and characterization of a new material of monolayer graphitic structure by electron diffraction, HREM, EELS.The synthesis process used in this study is reported early. We utilized a composite anode of graphite and copper for arc evaporation in helium.

Characterization of Monoclonal Anti-human Factor VII Antibody (B101/B1) that Recognized Three-dimensional Structures near Arg at Position 79 in the First EGF-like Domain

1998 ◽  
Vol 79 (01) ◽  
pp. 104-109 ◽  
Author(s):  
Osamu Takamiya
Keyword(s):  
Monoclonal Antibodies ◽  
Tissue Factor ◽  
Human Factor ◽  
Solid Phase ◽  
Three Dimensional ◽  
Coagulation Factors ◽  
Factor Vii ◽  
Dimensional Structure ◽  
Epidermal Growth

SummaryMurine monoclonal antibodies (designated hVII-B101/B1, hVIIDC2/D4 and hVII-DC6/3D8) directed against human factor VII (FVII) were prepared and characterized, with more extensive characterization of hVII-B101/B1 that did not bind reduced FVIIa. The immunoglobulin of the three monoclonal antibodies consisted of IgG1. These antibodies did not inhibit procoagulant activities of other vitamin K-dependent coagulation factors except FVII and did not cross-react with proteins in the immunoblotting test. hVII-DC2/D4 recognized the light chain after reduction of FVIIa with 2-mercaptoethanol, and hVIIDC6/3D8 the heavy chain. hVII-B101/B1 bound FVII without Ca2+, and possessed stronger affinity for FVII in the presence of Ca2+. The Kd for hVII-B101/B1 to FVII was 1.75 x 10–10 M in the presence of 5 mM CaCl2. The antibody inhibited the binding of FVII to tissue factor in the presence of Ca2+. hVII-B101/B1 also inhibited the activation of FX by the complex of FVIIa and tissue factor in the presence of Ca2+. Furthermore, immunoblotting revealed that hVII-B101/B1 reacted with non-reduced γ-carboxyglutaminic acid (Gla)-domainless-FVII and/or FVIIa. hVII-B101/B1 showed a similar pattern to that of non-reduced proteolytic fragments of FVII by trypsin with hVII-DC2/D4 on immunoblotting test. hVII-B101/B1 reacted differently with the FVII from the dysfunctional FVII variant, FVII Shinjo, which has a substitution of Gln for Arg at residue 79 in the first epidermal growth factor (1st EGF)-like domain (Takamiya O, et al. Haemosta 25, 89-97,1995) compared with normal FVII, when used as a solid phase-antibody for ELISA by the sandwich method. hVII-B101/B1 did not react with a series of short peptide sequences near position 79 in the first EGF-like domain on the solid-phase support for epitope scanning. These results suggested that the specific epitope of the antibody, hVII-B101/B1, was located in the three-dimensional structure near position 79 in the first EGF-like domain of human FVII.

Thermal characterization of ABS-Graphene blended three dimensional printed functional prototypes for electro chemical energy storage

2018 ◽  
Vol 1 (1) ◽  
pp. 1-11 ◽  
Author(s):  
Kamaljit Singh Boparai ◽  
Rupinder Singh
Keyword(s):  
Energy Storage ◽  
Structural Changes ◽  
Fused Deposition Modeling ◽  
Morphological Changes ◽  
Three Dimensional ◽  
Thermal Characterization ◽  
Chemical Energy ◽  
Flow Index ◽  
Fused Deposition

This study highlights the thermal characterization of ABS-Graphene blended three dimensional (3D) printed functional prototypes by fused deposition modeling (FDM) process. These functional prototypes have some applications as electro-chemical energy storage devices (EESD). Initially, the suitability of ABS-Graphene composite material for FDM applications has been examined by melt flow index (MFI) test. After establishing MFI, the feedstock filament for FDM has been prepared by an extrusion process. The fabricated filament has been used for printing 3D functional prototypes for printing of in-house EESD. The differential scanning calorimeter (DSC) analysis was conducted to understand the effect on glass transition temperature with the inclusion of Graphene (Gr) particles. It has been observed that the reinforced Gr particles act as a thermal reservoir (sink) and enhances its thermal/electrical conductivity. Also, FT-IR spectra realized the structural changes with the inclusion of Gr in ABS matrix. The results are supported by scanning electron microscopy (SEM) based micrographs for understanding the morphological changes.

Sign in / Sign up

Export Citation Format

Share Document