scholarly journals Experimental studies of the efficient use of flexible tool in creep age forming

2018 ◽  
Vol 190 ◽  
pp. 13002
Author(s):  
Qi Rong ◽  
Yong Li ◽  
Xiaoguang Sun ◽  
Zhusheng Shi ◽  
Lichun Meng ◽  
...  

Application of a newly developed flexible forming tool to creep age forming (CAF) process has been investigated in this study. The flexible tool mainly consists of sparsely distributed forming pins, splines and elastomeric sheet. The effect of key factors related to the forming tool on the shape of the formed parts has been studied through various CAF experiments. The key factors investigated in this study include: the interval between forming pins, the arrangement of pins, the accuracy requirement of pin height and the material of splines. It has been found that reducing the interval between pins can efficiently smooth the shape of CAFed plates. The feasibility of asymmetric arrangement of pins has been proven, which can decrease the number of used pins, reduce tool weight, and increase efficiency. The forming results are very sensitive to the pin height, thus the experimental set-up error should be carefully controlled. Additionally, compared with mild steel, spring steel is more suitable as the spline material.

Author(s):  
Donghui Zhang ◽  
Ruijie Liu

Abstract Orienteering has gradually changed from a professional sport to a civilian sport. Especially in recent years, orienteering has been widely popularized. Many colleges and universities in China have also set up this course. With the improvement of people’s living conditions, orienteering has really become a leisure sport in modern people’s life. The reduced difficulty of sports enables more people to participate, but it also exposes a series of problems. As the existing positioning technology is relatively backward, the progress in personnel tracking, emergency services, and other aspects is slow. To solve these problems, a new intelligent orienteering application system is developed based on the Internet of things. ZigBee network architecture is adopted in the system. ZigBee is the mainstream scheme in the current wireless sensor network technology, which has many advantages such as convenient carrying, low power consumption, and signal stability. Due to the complex communication environment in mobile signal, the collected information is processed by signal amplification and signal anti-interference technology. By adding anti-interference devices, video isolators and other devices, the signal is guaranteed to the maximum extent. In order to verify the actual effect of this system, through a number of experimental studies including the relationship between error and traffic radius and the relationship between coverage and the number of anchor nodes, the data shows that the scheme studied in this paper has a greater improvement in comprehensive performance than the traditional scheme, significantly improving the accuracy and coverage. Especially the coverage is close to 100% in the simulation experiment. This research has achieved good results and can be widely used in orienteering training and competition.


Glycobiology ◽  
2021 ◽  
Author(s):  
Jaya Srivastava ◽  
P Sunthar ◽  
Petety V Balaji

Abstract A distinctive feature of glycans vis-à-vis proteins and nucleic acids is its structural complexity which arises from the huge repertoire of monosaccharides, isomeric linkages and branching. A very large number of monosaccharides have so far been discovered in natural glycans. Experimentally, pathways for the biosynthesis have been characterized completely for 55 monosaccharides and partially for a few more. However, there is no single platform which provides information about monosaccharide biosynthesis pathways and associated enzymes We have gathered 572 experimentally characterized enzymes of 66 biosynthesis pathways from literature and set up a first of its kind database called the Monosaccharide Biosynthesis Pathways Database http://www.bio.iitb.ac.in/mbpd/). Annotations such as the reaction catalysed, substrate specificity, biosynthesis pathway and PubMed IDs are provided for all the enzymes in the database. Sequence homologs of the experimentally characterized enzymes found in nearly 13,000 completely sequenced genomes from Bacteria and Archaea have also been included in the database. This platform will help in the deduction of evolutionary relationships among enzymes such as aminotransferases, nucleotidyltransferases, acetyltransferases and SDR family enzymes. It can also facilitate experimental studies such as direct enzyme assays to validate putative annotations, establish structure–function relationship, expression profiling to determine the function, determine the phenotypic consequences of gene knock-out/knock-in and complementation studies.


2021 ◽  
pp. 1-11
Author(s):  
Yipu Mao ◽  
Muliang Jiang ◽  
Fanyu Zhao ◽  
Liling Long

Currently, DSC has been extensively studied in the diagnosis, differential diagnosis and prognosis evaluation of brain lymphoma, but it has not obtained a uniform standard. By combining DSC imaging features, this study investigated the imaging features and diagnostic value of several types of tumors such as primary brain lymphoma. At the same time, this study obtained data from brain lymphoma patients by data collection and set up different groups to conduct experimental studies to explore the correlation between IVIM-MRI perfusion parameters and DSC perfusion parameters in brain lymphoma. Through experimental research, it can be seen that the combination of two perfusion imaging techniques can more fully reflect the blood flow properties of the lesion, which is beneficial to determine the nature of the lesion.


Actuators ◽  
2020 ◽  
Vol 9 (3) ◽  
pp. 55
Author(s):  
Huseyin Aggumus ◽  
Rahmi Guclu

This paper investigated the performance of a semi-active tuned mass damper (STMD) on a multi-degree of freedom (MDOF) building model. A magnetorheological (MR) damper was used as a control element that provided semi-activity in the STMD. The Hardware in the Loop Simulation (HILS) method was applied to mitigate the difficulty and expense of experimental studies, as well as to obtain more realistic results from numerical simulations. In the implementation of this method for the STMD, the MR damper was set up experimentally, other parts of the system were modeled as computer simulations, and studies were carried out by operating these two parts simultaneously. System performance was investigated by excitation with two different acceleration inputs produced from the natural frequencies of the MDOF building. Additionally, a robust H ∞ controller was designed to determine the voltage transmitted to the MR damper. The results showed that the HILS method could be applied successfully to STMDs used in structural systems, and robust H ∞ controls improve system responses with semi-active control applications. Moreover, the control performance of the MR damper develops with an increase in the mass of the STMD.


2019 ◽  
Vol 23 (3 Part B) ◽  
pp. 1755-1764 ◽  
Author(s):  
Ahmet Ozturk ◽  
Mehmet Ozalp ◽  
Adnan Sozen ◽  
Metin Guru

This paper deals with the improvement of thermal performance of the heat recovery system in air-to-air unit by using a nanofluid of TiO particles and distilled water. The 2 experimental set-up equipped with 15 copper pipes of a 1000 mm length, 10.5 mm inner diameter, and 12 mm outer diameter was used. The evaporator section consists of 450 mm of heat pipes, the condenser section is 400 mm, and the adiabatic section is 150 mm. In experimental studies, 33% of the evaporator volumes of heat pipes were filled with working fluids. Experiments were carried out at temperatures between 25?C and 90?C by using five different cooling air-flows (40, 42, 45, 61, and 84 g/s), and two different heating powers (3 kW and 6 kW) for the evaporation section, to determine heat removed from the condensation section. Trials were performed for distilled water and nanofluid respectively, and the results were compared with each other. Results revealed that a 50% recovery in the thermal performance of the heat pipe heat recovery system was achieved in the design using TiO nanofluid as the working liquid, at a heating power of 3 kW, air 2 velocity of 2.03 m/s and air-flow of 84 g/s.


2018 ◽  
pp. 971-993
Author(s):  
Sara L. Parker ◽  
Kay Standing

This chapter discusses the complexity and challenges of exploring the impact of gender on women's ability to realise their potential in Nepal. It demonstrates the limitations of using binary divisions to exploring ‘gender' as a key factor that impacts upon women's lives. By analysing interviews with ‘inspirational' women in Nepal conducted between 2009 and 2012 the chapter highlights the importance of exploring intersectional factors that also influenced women's life experiences. Based on interviews with 34 ‘inspirational' women in Nepal the chapter explores how the term ‘inspirational' is defines and discusses the range of work being done by so many women in Nepal that is truly inspiring. Through a discourse analysis of their stories of childhood and education we can see what key factors have played a role in enabling these women to realise their potential and to overcome intersectional barriers to work in a range of diverse positions, from the first female District Development Officer to the first women to gain her doctorate from overseas, to women who have set up NGOS working towards a more equitable and just society to others who have set up their own businesses or becoming leading academics. The conclusion draws together some key recommendations for future research and policy makers as well as those seeking to promote more equitable sustainable development that truly includes women in the process as autonomous, heterogeneous actors in the development process


Sign in / Sign up

Export Citation Format

Share Document