An analysis of the growth of mung beans at a range of plant densities in tropical Australia. II. Seed production

1982 ◽  
Vol 33 (1) ◽  
pp. 53 ◽  
Author(s):  
RC Muchow ◽  
DA Charles-Edwards
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Growth Rates ◽  
Dry Matter ◽  
Plant Density ◽  
Critical Rate ◽  
Plant Densities ◽  
Tropical Australia ◽  
Pod Number ◽  
Pod Growth

An analysis of seed production by crops of Vigna radiata cvv. Berken and CES-ID-21 and V. mungo cv. Regur, grown at a range of plant densities, indicated that the proportion of carbon assimilated during pod-filling and partitioned to the seed varied in such a way that seed yield at maturity was relatively unaffected by plant density. Seed yield of Regur was much higher than that of either Berken or CES-ID-21, and this could be attributed primarily to the longer duration of pod-filling in Regur rather than to any differences in potential pod growth rates. The data support the hypothesis that during the period of pod initiation, each viable pod requires a critical rate of supply of assimilate, and suggest that this critical rate of supply is less for V. mungo than for V. uadiata. Whilst pod number, and hence seed yield, was determined by the rate of assimilate supply during the period of pod initiation, not all the dry matter accumulated during pod-filling was partitioned to the pods. Hence seed yield in these mung bean cultivars does not appear to be determined solely by assimilate supply during pod-filling.

Physiology of growth and seed production in Lupinus angustifolius L. III. Effects of defoliation and lateral branch excision on dry matter and seed production at different growth temperatures

1984 ◽  
Vol 35 (4) ◽  
pp. 511 ◽  
Author(s):  
RW Downes ◽  
JS Gladstones
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Dry Matter ◽  
Reproductive Investment ◽  
Stem Growth ◽  
Lupinus Angustifolius ◽  
Yield Response ◽  
Vegetative Development ◽  
Pod Number ◽  
Cool Conditions

Plants of Lupinus angustifolius cv. Unicrop were raised at 27/22 or 21/16�C dayhight temperatures until flowering. They were then either grown on to maturity at these conditions or moved to the other regime. Branches were removed as they started to develop and leaves were removed at the start of flowering so that 0, 3, 6, 9, 12 upper leaves or all 21 leaves were retained. Conditions before flowering determined potential pod number. Defoliation treatments revealed that under favourably cool conditions all leaves contributed to seed yield but in treatments involving 27/22'C there was no seed yield response to more than about six leaves, emphasizing the significance of environmental conditions rather than current assimilate on pod set and other yield components. In another experiment, plants were raised to flowering at 27/22, 21/16 or 15/10�C before flowering, when all were moved to 21/16�C. Half the plants were allowed to develop branches and on the remainder branch buds were removed. Branch and stem growth appeared to provide severe competition for the development of the primary inflorescence. Though branching was much more pronounced in plants at 15/10�C before flowering than in other treatments, vegetative development exceeded reproductive investment and harvest index was low under these conditions. It was suggested that there appears to be a need to develop and evaluate unbranched or less-branched lupin genotypes.

scholarly journals THE INFLUENCE OF DATE OF PLANTING AND FERTILIZER APPLICATION ON GROWTH COMPONENTS OF COLUMBUS GRASS (SORGHUM ALMUM)

2021 ◽  
Vol 24 (1) ◽  
pp. 62-69
Author(s):  
I. R. Muhammad ◽  
M. S Kallah ◽  
E. O. Otchere ◽  
J. P. Otchere ◽  
J. P. Alawa ◽  
...  
Keyword(s):  
Seed Yield ◽  
Dry Matter ◽  
Plant Density ◽  
Fertilizer Application ◽  
N Application ◽  
Plant Vigour ◽  
Northern Guinea Savanna ◽  
Guinea Savanna ◽  
Plant Densities ◽  
High Tillering

Trials were conducted at Gangora in the northern Guinea Savanna ecological zone of Nigeria during the 1990 and 1991 rainy seasons. The effects of date of planting (4th,14th, 24th June and 4th  July) and levels of nitrogen fertilizer (0, 50,100, 150 and 200kg/ha) on growth components of Sorghum almum  were investigated. Planting in mid-June (14th June) in 1990 and early-July (4th July) in 1991 resulted in superior stand established and dry matter yields (p<0.05) than other dates. In mid-June and early-July planting 14 day post-planting, plant densities were 7.0 and 9.0 culms/m2 while plant heights were 20.4 and 11.3cm for the respective years. It had high tillering capacity and irrespective of date of planting (except for early-June planting) plant densities by 56 days post-planting (DPP) were greater than 100 culms/m2. Plant height at this stage were greater than 100 culms/m2 and were generally above 200cm. ninety DPP the pasture was at full bloom/hard dough stage. Dm yields then ranged from 8.0 to 11.4 tDM/ha in 1990 and 9.6 to 14.7 tDM/ha in 1991. Similarly seed yield for the respective years were 894.7 and 836.3 kg/ha. Fertilizer application (p<0.05) plant vigour, tillering and dry matter yield up to the highest N applied. In the first years trial, plant density at 35 days post-planting ranged from 12.0 to 29.0 culms/m2 while in the second year the ranged was 13.0 to 26.0 culms/m2. The corresponding values at 56 DPP (i.e 42 days following N application) were 32.0 to 81.0 and 45.0 to 101.0 culms/m2. Dry matter yields rose steadily from 6.5 to 12.5 tDM/ha in 1990 and from 8.9 to 13.6 tDM/ha in 1991 as fertilizer was increased 0 to 200 kgN/ha. Seed yield during the same period for the respective years varied from 416.0 to 753.0kg/ha. This study has shown that planting between mid-June and early-July with fertilize application of 100 to 200 khN/ha favour S. almum establishment and production in the northern Guinea Savanna of Nigeria

scholarly journals Plant Density Effects on Yield and Yield Attributes of Two Soybean Varieties in Kharif-II Season of Bangladesh

2019 ◽  
Vol 4 (3) ◽  
Keyword(s):  
Seed Yield ◽  
Dry Matter ◽  
Plant Density ◽  
Planting Pattern ◽  
Yield Attributes ◽  
Stover Yield ◽  
Plant Densities ◽  
100 Seed Weight ◽  
Number Of Branches ◽  
Plot Design

The present study was undertaken with a view to study the effect of plant density on yield and yield attributes of two soybean varieties in kharif–II season. The experiment was conducted in kharif-II season 2012 at mymensingh with two soybean varieties, namely PB-1 (Shohag) and G-2 (Bangladesh soybean-4) and six plant densities, viz; 20, 40, 60, 80, 100 and 120 plants m-2 established using an equidistant (square) planting pattern of 22.4cm x 22.4 cm, 15.8 cm x 15.8 cm, 12.9 cm x12.9 cm, 11.2 cm x 11.2 cm, 10 cm x 10 cm and 9.1 cm 9.1 cm, respectively. The experiment was laid out in a split-plot design with varieties in main-plots and plant densities in sub-plots. The treatments were replicated three times. Increased plant density increased plant height, number of nodes plant-1, total dry matter, seed yield (1.02 t ha-1) and Stover yield (1.15 t ha-1) 80 to 100 plants m-2 and then decreased with increased plant density. Again increased plant density linearly decreased in number of branches plant-1, fertile pods plant-1, non-fertile pods plant-1, number of seeds plant-1, seed yield plant-1 and 100- seed weight up to 120 plants m-2 depending on variety and season. The study concludes that the highest yield of soybean in kharif –II season could be obtained from varietyPB-1 with a plant density of 100 plants m-2 and 80 plants m-2in G-2.

scholarly journals Plantain seed production in a radial trial

1990 ◽  
pp. 103-106
Author(s):  
J.S. Rowarth
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Trial Design ◽  
Plant Density ◽  
Plantago Lanceolata ◽  
Production Plant ◽  
Significant Positive Effect ◽  
Plant Vigour ◽  
Plant Densities ◽  
Positive Effect

Plantain (Plantago lanceolata) was grown in a radial trial in order to investigate the effect of plant density on seed production. Plant densities ranged from 278 plants/m2 to 17 plants/m2 in 9 arcs. Plants were monitored and harvested individually, thus giving effective high replication (32). Decreasing plant density had a significant positive effect on seed head production (both numbers and size of head), seed yield and plant vigour. Highest seed yield was associated with a density of 17 plants/m2. Keywords: plantain, seed production, plant density, competition, radial trial design

An analysis of the growth of mung beans at a range of plant densities in tropical Australia. I. Dry matter production

1982 ◽  
Vol 33 (1) ◽  
pp. 41 ◽  
Author(s):  
RC Muchow ◽  
DA Charles-Edwards
Keyword(s):  
Dry Matter ◽  
Plant Density ◽  
Incident Light ◽  
Dry Matter Production ◽  
Wet Season ◽  
Matter Production ◽  
Light Utilization ◽  
Plant Densities ◽  
Tropical Australia ◽  
Photosynthetic Activities

An experiment was conducted during the wet season in monsoonal tropical Australia to determine (a) whether plant density affected above-ground dry matter production of Vigna vadiata cv. Berken and, if so, what those effects could be attributed to, and (b) if there were differences between V. vadiata cvv. Berken and CES-ID-21 and V, mungo cv. Regur in their efficiencies of utilization of incident light energy for the production of dry matter. Differences in above-ground dry matter production of the Berken crops growing at three different plant densities could be attributed primarily to the different times taken by them to reach full light interception. In contrast, differences in above-ground dry matter production between species and cultivars were due to differences in both their efficiencies of light utilization and the amounts of light intercepted by them. Further measurements are required to determine whether the observed differences in light utilization efficiencies are attributable to differences in potential photosynthetic activities or to differences in partitioning of dry matter between root and shoot.

scholarly journals Relationship Between Plant Density and Fruit and Seed Production in Muskmelon

2002 ◽  
Vol 127 (5) ◽  
pp. 855-859 ◽  
Author(s):  
Haim Nerson
Keyword(s):  
Seed Production ◽  
Seed Size ◽  
Seed Yield ◽  
Field Experiments ◽  
Seed Quality ◽  
Plant Density ◽  
Small Fruit ◽  
Plant Densities ◽  
Seed Yields ◽  
High Seed Yield

Field experiments were conducted in 1996 and 1997 to examine the effects of plant density on yield and quality of fruit and seeds of muskmelons (Cucumis melo L.). Two open-pollinated cultivars, Noy Yizre'el (Ha'Ogen type) and TopMark (western U.S. shipper type), were grown at plant densities ranging from 0.5 to 16.0 plants/m2 under commercial conditions. The highest marketable fruit yields were achieved with plant densities of 2 to 4 plants/m2. In contrast, the highest seed yields were obtained at 8 to 12 plants/m2. Seed yield index [seed yield (g)/fruit yield (kg)] was used as a parameter to define seed production efficiency. High seed yield was closely related to high value of the seed yield index. High seed yield indexes resulted from high plant densities (up to 12 plants/m2), at which the crops produced many, but relatively small fruit. In all cases, the seed yield per fruit (seed number and seed size) increased with increasing fruit weight. However, the sum of the seed yield of two small fruit was always greater than the seed yield of one, double-sized fruit. There was a clear exception with extremely small fruit (<500 g), which produced both low seed yields and poor seed quality. A positive relationship was found between fruit size and seed size in both cultivars. Nevertheless, relatively small seeds (25 to 30 mg) extracted from relatively small fruit (500 to 1000 g) showed the best performance in terms of germination and emergence percentages and rates, and in the vegetative development vigor of the seedlings.

scholarly journals Paclobutrazol Improves Sesame Yield by Increasing Dry Matter Accumulation and Reducing Seed Shattering Under Rainfed Conditions

2021 ◽  
Author(s):  
Muhammad Zeeshan Mehmood ◽  
Ghulam Qadir ◽  
Obaid Afzal ◽  
Atta Mohi Ud Din ◽  
Muhammad Ali Raza ◽  
...  
Keyword(s):  
Leaf Area ◽  
Seed Production ◽  
Seed Yield ◽  
Dry Matter ◽  
Biomass Accumulation ◽  
Total Biomass ◽  
Dry Matter Accumulation ◽  
Seed Shattering ◽  
Rainfed Conditions ◽  
Leaf Greenness

AbstractSeveral biotic and abiotic stresses significantly decrease the biomass accumulation and seed yield of sesame crops under rainfed areas. However, plant growth regulators (such as Paclobutrazol) can improve the total dry matter and seed production of the sesame crop. The effects of the paclobutrazol application on dry matter accumulation and seed yield had not been studied before in sesame under rainfed conditions. Therefore, a two-year field study during 2018 and 2019 was conducted with key objectives to assess the impacts of paclobutrazol on leaf greenness, leaf area, total dry matter production and partitioning, seed shattering, and seed yield of sesame. Two sesame cultivars (TS-5 and TS-3) were treated with four paclobutrazol concentrations (P0 = Control, P1 = 100 mg L−1, P2 = 200 mg L−1, P3 = 300 mg L−1). The experiment was executed in RCBD-factorial design with three replications. Compared with P0, treatment P3 improved the leaf greenness of sesame by 17%, 38%, and 60% at 45, 85, and 125 days after sowing, respectively. However, P3 treatment decreased the leaf area of sesame by 14% and 20% at 45 and 85 days after sowing than P0, respectively. Compared with P0, treatment P3 increased the leaf area by 46% at 125 days after sowing. On average, treatment P3 also improved the total biomass production by 21% and partitioning in roots, stems, leaves, capsules, and seeds by 23%, 19%, 23%, 22%, and 40%, respectively, in the whole growing seasons as compared to P0. Moreover, under P3 treatment, sesame attained the highest seed yield and lowest seed shattering by 27% and 30%, respectively, compared to P0. This study indicated that by applying the paclobutrazol concentration at the rate of 300 mg L−1 in sesame, the leaf greenness, leaf areas, biomass accumulation, partitioning, seed yield, and shatter resistance could be improved. Thus, the optimum paclobutrazol level could enhance the dry matter accumulation and seed production capacity of sesame by decreasing shattering losses under rainfed conditions.

Canola seed yield and phenological responses to plant density

2016 ◽  
Vol 96 (1) ◽  
pp. 151-159 ◽  
Author(s):  
Gan Yantai ◽  
K. Neil Harker ◽  
H. Randy Kutcher ◽  
Robert H. Gulden ◽  
Byron Irvine ◽  
...  
Keyword(s):  
Seed Yield ◽  
Plant Density ◽  
Block Design ◽  
Positive Association ◽  
High Yield ◽  
Western Canada ◽  
Flowering Period ◽  
Canola Seed ◽  
Randomized Complete Block Design ◽  
Plant Densities

Optimal plant density is required to improve plant phenological traits and maximize seed yield in field crops. In this study, we determined the effect of plant density on duration of flowering, post-flowering phase, and seed yield of canola in diverse environments. The field study was conducted at 16 site-years across the major canola growing area of western Canada from 2010 to 2012. The cultivar InVigor® 5440, a glufosinate-resistant hybrid, was grown at five plant densities (20, 40, 60, 80, and 100 plants m−2) in a randomized complete block design with four replicates. Canola seed yield had a linear relationship with plant density at 8 of the 16 site-years, a quadratic relationship at 4 site-years, and there was no correlation between the two variables in the remaining 4 site-years. At site-years with low to medium productivity, canola seed yield increased by 10.2 to 14.7 kg ha−1 for every additional plant per square metre. Averaged across the 16 diverse environments, canola plants spent an average of 22% of their life cycle flowering and another 27% of the time filling seed post-flowering. Canola seed yield had a negative association with duration of flowering and a positive association with the days post-flowering but was not associated with number of days to maturity. The post-flowering period was 12.7, 14.7, and 12.6 d (or 55, 68, and 58%) longer in high-yield experiments than in low-yield experiments in 2010, 2011, and 2012, respectively. We conclude that optimization of plant density for canola seed yield varies with environment and that a longer post-flowering period is critical for increasing canola yield in western Canada.

scholarly journals PLANT DENSITY AND NITROGEN FERTILIZATION ON COMMON BEAN NUTRITION AND YIELD

2017 ◽  
Vol 30 (3) ◽  
pp. 670-678 ◽  
Author(s):  
ROGÉRIO PERES SORATTO ◽  
TIAGO ARANDA CATUCHI ◽  
EMERSON DE FREITAS CORDOVA DE SOUZA ◽  
JADER LUIS NANTES GARCIA
Keyword(s):  
Grain Yield ◽  
Common Bean ◽  
Nitrogen Fertilization ◽  
Dry Matter ◽  
Plant Density ◽  
N Fertilization ◽  
N Concentration ◽  
Plant Densities ◽  
N Rates ◽  
Lower Plant

ABSTRACT The objective of this work was to evaluate the effect of plant densities and sidedressed nitrogen (N) rates on nutrition and productive performance of the common bean cultivars IPR 139 and Pérola. For each cultivar, a randomized complete block experimental design was used in a split-plot arrangement, with three replicates. Plots consisted of three plant densities (5, 7, and 9 plants ha-1) and subplots of five N rates (0, 30, 60, 120, and 180 kg ha-1). Aboveground dry matter, leaf macro- and micronutrient concentrations, yield components, grain yield, and protein concentration in grains were evaluated. Lower plant densities (5 and 7 plants m-1) increased aboveground dry matter production and the number of pods per plant and did not reduce grain yield. In the absence of N fertilization, reduction of plant density decreased N concentration in common bean leaves. Nitrogen fertilization linearly increased dry matter and leaf N concentration, mainly at lower plant densities. Regardless of plant density, the N supply linearly increased grain yield of cultivars IPR 139 and Pérola by 17.3 and 52.2%, respectively.

scholarly journals Crop density and seed production of tall fescue (Festuca arundinacea Schreber). 1. Yield and plant development

1999 ◽  
Vol 79 (4) ◽  
pp. 535-541 ◽  
Author(s):  
N. A. Fairey ◽  
L. P. Lefkovitch
Keyword(s):  
Population Density ◽  
Seed Production ◽  
Seed Yield ◽  
Tall Fescue ◽  
Festuca Arundinacea ◽  
Plant Density ◽  
Initial Density ◽  
Row Spacing ◽  
Initial Population ◽  
Crop Density

A field study was conducted with tall fescue (Festuca arundinacea Schreber) to determine the effect of the initial population density and spatial arrangement of plants on crop development and seed yield. Individual seedling plants were transplanted at seven densities (1.6, 3.1, 6.3, 12.5, 25, 50, and 100 plants m−2) and three row spacings (20, 40, and 80 cm), and characteristics of seed production were determined for 3 yr (1991–1993). Over the 3 yr, heading commenced at dates differing by 15 d and was delayed, as density increased, by 8, 6, and 2 d, respectively, in the first, second, and third production years. The time of seed maturity differed among years (21 July to 4 August) but was generally unaffected by density or row spacing. In the first production year, seed yield increased with density up to 25 plants m−2 for each row spacing, then remained constant to at least 50 plants m−2 with both 20- or 40-cm rows; it decreased slightly at 100 plants m−2 with 20 cm rows. In the second production year, seed yield was relatively independent of plant density except that it decreased when the initial density was less than 6 plants m−2 with a row spacing of 80 cm, and tended to be greatest with the 40-cm row spacing at 6–25 plants m−2. In the third production year, seed yield was much lower than in the previous 2 yr but the pattern of response to the density and row spacing treatments was similar to that in the second production year. The seed yield of tall fescue can be optimized for at least 3 consecutive years by establishing an initial density of 20–100 plants m−2 in rows spaced 20–60 cm apart. If the maximization of first-year seed yield is a priority, then the initial establishment should be at a density of 25–50 plants m−2 in rows spaced 20–40 cm apart. Key words: Tall fescue, Festuca arundinacea Schreber, population density, plant spacing, seed production

Sign in / Sign up

Export Citation Format

Share Document