Bruce William Chappell 1936–2012

2017 ◽  
Vol 28 (2) ◽  
pp. 146 ◽  
Author(s):  
Ian S. Williams ◽  
Kenton S.W. Campbell
Keyword(s):  
Mineral Deposits ◽  
Evolutionary Path ◽  
Granite Magma ◽  
X Ray ◽  
Geological Materials ◽  
Source Regions ◽  
Residual Material ◽  
Different Types ◽  
The Subject ◽  
Radical Ideas

Bruce Chappell was one of the most distinguished geologists of his generation whose contributions to understanding the origins of granites are both insightful and profound. A pioneer in the application of X-ray fluorescence spectrography to the analysis of geological materials, his radical ideas about magma genesis, still the subject of vigorous debate, have dominated and largely determined the global directions of subsequent research on granites. His restite model, the recognition that most granite magmas move bodily away from their source regions as a mixture of melt and solid residual material, the progressive separation of which determines the magma composition, underlies his tenet that granites are images of their source. His consequent recognition, with Allan White, that there are two fundamentally different types of granite magma, I-type (derived from igneous sources) and S-type (derived from weathered sedimentary sources), each with its distinctive evolutionary path and associated mineralization, continues to underpin research into granites worldwide, and the search for granite-related mineral deposits.

Identification of Asbestos Fibres in a Water Sample by X-Ray Microanalysis

1975 ◽  
Vol 33 ◽  
pp. 274-275
Author(s):  
K. A. Brookes ◽  
D. Finbow ◽  
Madeleine Samuel
Keyword(s):  
Water Sample ◽  
Background Radiation ◽  
X Ray ◽  
Left Hand ◽  
Transmission Imaging ◽  
Different Types ◽  
Normal Specimen ◽  
Liquid Nitrogen Cooling ◽  
Normal Transmission ◽  
Additional Port

Investigation of the particulate matter contained in the water sample, revealed the presence of a number of different types and certain of these were selected for analysis.An A.E.I. Corinth electron microscope was modified to accept a Kevex Si (Li) detector. To allow for existing instruments to be readily modified, this was kept to a minimum. An additional port is machined in the specimen region to accept the detector, with the liquid nitrogen cooling dewar conveniently housed in the left hand cupboard adjacent to the microscope column. Since background radiation leads to loss in the sensitivity of the instrument, great care has been taken to reduce this effect by screening and manufacturing components that are near the specimen from material of low atomic number. To change from normal transmission imaging to X-ray analysis, the special 4-position specimen rod is inserted through the normal specimen airlock.

Point and planar defects in the iron sulfide compounds Fe1-xS

1984 ◽  
Vol 42 ◽  
pp. 434-435
Author(s):  
Thao A. Nguyen
Keyword(s):  
Low Temperatures ◽  
Direct Evidence ◽  
Iron Sulfide ◽  
Planar Defects ◽  
Selective Area ◽  
Vacancy Ordering ◽  
Different Types ◽  
Lattice Images ◽  
The Subject ◽  
Beam Lattice

It is well known that the large deviations from stoichiometry in iron sulfide compounds, Fe1-xS (0≤x≤0.125), are accommodated by iron vacancies which order and form superstructures at low temperatures. Although the ordering of the iron vacancies has been well established, the modes of vacancy ordering, hence superstructures, as a function of composition and temperature are still the subject of much controversy. This investigation gives direct evidence from many-beam lattice images of Fe1-xS that the 4C superstructure transforms into the 3C superstructure (Fig. 1) rather than the MC phase as previously suggested. Also observed are an intrinsic stacking fault in the sulfur sublattice and two different types of vacancy-ordering antiphase boundaries. Evidence from selective area optical diffractograms suggests that these planar defects complicate the diffraction pattern greatly.

Geological Field Sketches and Illustrations

2019 ◽  
Author(s):  
Matthew J. Genge
Keyword(s):  
Cross Sections ◽  
Earth Science ◽  
Three Dimensional ◽  
Worked Examples ◽  
Scientific Publications ◽  
Thin Sections ◽  
Geological Features ◽  
Different Types ◽  
The Subject

Drawings, illustrations, and field sketches play an important role in Earth Science since they are used to record field observations, develop interpretations, and communicate results in reports and scientific publications. Drawing geology in the field furthermore facilitates observation and maximizes the value of fieldwork. Every geologist, whether a student, academic, professional, or amateur enthusiast, will benefit from the ability to draw geological features accurately. This book describes how and what to draw in geology. Essential drawing techniques, together with practical advice in creating high quality diagrams, are described the opening chapters. How to draw different types of geology, including faults, folds, metamorphic rocks, sedimentary rocks, igneous rocks, and fossils, are the subjects of separate chapters, and include descriptions of what are the important features to draw and describe. Different types of sketch, such as drawings of three-dimensional outcrops, landscapes, thin-sections, and hand-specimens of rocks, crystals, and minerals, are discussed. The methods used to create technical diagrams such as geological maps and cross-sections are also covered. Finally, modern techniques in the acquisition and recording of field data, including photogrammetry and aerial surveys, and digital methods of illustration, are the subject of the final chapter of the book. Throughout, worked examples of field sketches and illustrations are provided as well as descriptions of the common mistakes to be avoided.

scholarly journals Ionic and non-ionic intravenous X-ray contrast media: antibacterial agents?

2021 ◽  
pp. 028418512110198
Author(s):  
Frank Mosler ◽  
Johannes K Richter ◽  
Marc Schindewolf ◽  
Nando Mertineit ◽  
Hendrik von Tengg-Kobligk ◽  
...  
Keyword(s):  
Contrast Media ◽  
Bactericidal Effect ◽  
Future Research ◽  
Inhibitory Effects ◽  
X Ray ◽  
Percutaneous Abscess Drainage ◽  
Ionic Contrast ◽  
Bactericidal Effects ◽  
Free Iodine ◽  
The Subject

X-ray contrast media have been reported to have inhibitory effects on bacterial growth. Despite its potentially beneficial effect on patients, these features of contrast media have received relatively little attention in the medical literature in the past decades. The aim of this review is to evaluate the literature concerning the bactericidal and bacteriostatic effects of X-ray contrast media, specifically if there is a known difference concerning these effects between ionic and non-ionic contrast media. Systematic literature review was performed for the years of publication between 1911 and 2019. Since the publication of Grossich in 1911, the effect of iodine on the treatment of superficial infections in surgical procedures has been established clinical knowledge. Bacteriostatic and bactericidal effects of ionic X-ray contrast media are well established. However, non-ionic contrast agents have been the subject of little research in this respect. In past decades, the hypothesis emerged in the literature that mainly the concentration of free iodine might be responsible for any bacteriostatic or bactericidal effect of ionic X-ray contrast media. Nowadays, however, only non-ionic contrast media are used. The question regarding the mechanism and magnitude of bacteriostatic or bactericidal effects of these, non-ionic contrast media, could not be answered conclusively from this review. Non-ionic contrast media could be used intentionally when a local antibacterial effect is intended (e.g. in percutaneous abscess drainage), as well as to reduce the overall dose of antibiotics administered to a patient. Thus, this question remains relevant and might constitute the area of future research.

scholarly journals Synthesis and Characterization of Clay Polymer Nanocomposites of P(4VP-co-AAm) and Their Application for the Removal of Atrazine

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 721 ◽  
Author(s):  
Jorge A. Ramírez-Gómez ◽  
Javier Illescas ◽  
María del Carmen Díaz-Nava ◽  
Claudia Muro-Urista ◽  
Sonia Martínez-Gallegos ◽  
...  
Keyword(s):  
Polymer Nanocomposites ◽  
Nanocomposite Materials ◽  
Synthesis And Characterization ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
Numerous Species ◽  
X Ray ◽  
Different Types ◽  
Synthesized Materials

Atrazine (ATZ) is an herbicide which is applied to the soil, and its mechanism of action involves the inhibition of photosynthesis. One of its main functions is to control the appearance of weeds in crops, primarily in corn, sorghum, sugar cane, and wheat; however, it is very toxic for numerous species, including humans. Therefore, this work deals with the adsorption of ATZ from aqueous solutions using nanocomposite materials, synthesized with two different types of organo-modified clays. Those were obtained by the free radical polymerization of 4-vinylpyridine (4VP) and acrylamide (AAm) in different stoichiometric ratios, using tetrabutylphosphonium persulfate (TBPPS) as a radical initiator and N,N′-methylenebisacrylamide (BIS) as cross-linking agent. The structural, morphological, and textural characteristics of clays, copolymers, and nanocomposites were determined through different analytical and instrumental techniques, i.e., X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Adsorption kinetics experiments of ATZ were determined with the modified and synthesized materials, and the effect of the ratio between 4VP and AAm moieties on the removal capacities of the obtained nanocomposites was evaluated. Finally, from these sets of experiments, it was demonstrated that the synthesized nanocomposites with higher molar fractions of 4VP obtained the highest removal percentages of ATZ.

scholarly journals Microwave-Assisted Fabrication of Mesoporous Silica-Calcium Phosphate Composites for Dental Application

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 53
Author(s):  
Adrian Szewczyk ◽  
Adrianna Skwira ◽  
Marta Ginter ◽  
Donata Tajer ◽  
Magdalena Prokopowicz
Keyword(s):  
Calcium Phosphate ◽  
Mesoporous Silica ◽  
Octacalcium Phosphate ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Coating Solution ◽  
X Ray ◽  
Microwave Assisted ◽  
Calcium Orthophosphates ◽  
Different Types

Herein, the microwave-assisted wet precipitation method was used to obtain materials consisting of mesoporous silica (SBA-15) and calcium orthophosphates (CaP). Composites were prepared through immersion of mesoporous silica in different calcification coating solutions and then exposed to microwave radiation. The composites were characterized in terms of molecular structure, crystallinity, morphology, chemical composition, and mineralization potential by Fourier-transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy (SEM-EDX). The application of microwave irradiation resulted in the formation of different types of calcium orthophosphates such as calcium deficient hydroxyapatite (CDHA), octacalcium phosphate (OCP), and amorphous calcium phosphate (ACP) on the SBA-15 surface, depending on the type of coating solution. The composites for which the progressive formation of hydroxyapatite during incubation in simulated body fluid was observed were further used in the production of final pharmaceutical forms: membranes, granules, and pellets. All of the obtained pharmaceutical forms preserved mineralization properties.

scholarly journals Measuring the supermassive black hole parameters with space missions

2006 ◽  
Vol 2 (S238) ◽  
pp. 475-476
Author(s):  
Alexander F. Zakharov
Keyword(s):  
Black Hole ◽  
Spectral Line ◽  
Accretion Disks ◽  
Seyfert Galaxies ◽  
Emission Lines ◽  
X Ray ◽  
Line Shapes ◽  
Supermassive Black Hole ◽  
Broad Emission ◽  
Different Types

AbstractRecent X-ray observations of microquasars and Seyfert galaxies reveal broad emission lines in their spectra, which can arise in the innermost parts of accretion disks. Recently Müller & Camenzind (2004) classified different types of spectral line shapes and described their origin. Zakharov (2006b) clarified their conclusions about an origin of doubled peaked and double horned line shapes in the framework of a radiating annulus model and discussed s possibility to evaluate black hole parameters analyzing spectral line shapes.

3-D microstructure of olivine in complex geological materials reconstructed by correlative X-ray μ-CT and EBSD analyses

2017 ◽  
Vol 268 (2) ◽  
pp. 193-207 ◽  
Author(s):  
W.-A. KAHL ◽  
N. DILISSEN ◽  
K. HIDAS ◽  
C.J. GARRIDO ◽  
V. LÓPEZ-SÁNCHEZ-VIZCAÍNO ◽  
...  
Keyword(s):  
X Ray ◽  
Geological Materials

Determination of crystallinity of Chinese handmade papers by means of X-ray diffraction

2020 ◽  
Vol 41 (2) ◽  
pp. 69-86
Author(s):  
Peng Liu ◽  
Hongbin Zhang ◽  
Sinong Wang ◽  
Hui Yu ◽  
Bingjie Lu ◽  
...  
Keyword(s):  
Negative Influence ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Eulaliopsis Binata ◽  
Different Types ◽  
Powder Samples ◽  
Xrd Patterns ◽  
Xrd Method

AbstractThe crystallinity indices (CrI) of Chinese handmade papers were investigated using the X-ray diffraction (XRD) method. Four Chinese handmade papers, Yingchun, Zhuma, Yuanshu and Longxucao papers were used as model substrates of mulberry bark, ramie, bamboo and Eulaliopsis binata papers, respectively. Two forms of the paper samples, paper sheets and their comminuted powders, were used in this study. The results showed that their XRD patterns belong to the cellulose-I type and Iβ dominates the cellulose microstructure of these paper samples. Moreover, it was found that the microstructures and CrIs of cellulose of these papers were changed by the grinding treatment. This work suggested that the sheet form of the handmade papers is suitable to determine CrI by XRD, despite the contribution of non-cellulosic components in the papers. The order of CrIs for these paper sheet samples was Yingchun, Zhuma, Longxucao and Yuanshu papers. Besides CrIs, differences in cross-sectional areas of the crystalline zone of cellulose can be used for comparing different types of handmade papers. It was also found that the CrIs and crystallite size of paper cellulose varied between the sheet samples and the powder samples, illustrating that the pulverisation has a negative influence on the microstructure of the handmade papers.

Sign in / Sign up

Export Citation Format

Share Document