Study of a shear thickening fluid: the suspensions of monodisperse polystyrene microspheres in polyethylene glycol

2016 ◽  
Vol 38 (7) ◽  
pp. 935-942 ◽  
Author(s):  
Jianbin Qin ◽  
Guangcheng Zhang ◽  
Xuetao Shi
2019 ◽  
Vol 69 (4) ◽  
pp. 402-408 ◽  
Author(s):  
Mansi Singh ◽  
Sanjeev K Verma ◽  
Ipsita Biswas ◽  
Rajeev Mehta

Shear thickening properties of fumed silica-polyethylene glycol (PEG) with shear thickening fluid (STF) of different concentrations and with an organically modified clay, Nanomer I.28 E as nano-additive have been investigated by both steady-state and dynamic state rheology. Difference in rheology if instead of nanoclay, an equal wt% of additional fumed silica is added to 20 per cent fumed silica-PEG200 STF, has been studied. At 25 °C, in case of addition of nanoclay the increase in critical viscosity is less than that observed for same additional amount of fumed silica. Interestingly, an opposite result is seen at higher temperatures i.e. 45 °C and 55 °C. Moreover, the difference in steady-state and dynamic state viscosity values decreases on addition of nanoclay. It is noted that an increase in concentration of clay increases the value of dynamic parameters whereas for STF of only fumed silica particles the values are constant irrespective of the change in concentration. More importantly, ease of processing, elasticity, stability and consistency of rheological results of STF increases to a significant extent on addition of relatively inexpensive nano-additive.


This research aims to participate in producing body shield that can overcome pervious drawbacks using behaviour of shear thickening fluid. Initially, the rheological behaviour of silica-polyethylene glycol shear thickening fluid is examined at different concentrations. Then, ballistic fabric samples are impregnated into silica-polyethylene glycol shear thickening fluid at various concentrations of silica and tested using gas gun simulating real ballistic threat. After that, the impact of rubbery hot water pack filled with around 66.67 wt% starch in water is tested using gas gun. Results showed as the concentration of silica increases, the indentation depth in the impregnated fabric decreases which may result in improving performance of ballistic fabric to 12.5 % in case of using 60 wt% silica, 7.35 % in case of using 30 wt% silica and 3.31 % in case of using 7.5 wt% silica with respect to plain sample. As it showed that no indentation depth is formed in modelling clay when rubbery hot water pack filled with around 66.67 wt% starch in water is tested using gas gun causing improvement percentage to be 100% compared to plain sample of Twaron (CT 714).


2012 ◽  
Author(s):  
Mahesh Hosur ◽  
Norman Wagner ◽  
C. T. Sun ◽  
Vijaya Rangari ◽  
Jack Gillespie ◽  
...  

2021 ◽  
pp. 002199832098424
Author(s):  
Mohsen Jeddi ◽  
Mojtaba Yazdani

Whereas most previous studies have focused on improving the penetration resistance of Shear Thickening Fluids (STFs) treated composites, in this study, the dynamic compressive response of single and multi-ply 3 D E-Glass Fiber Reinforced Polymer (GFRP) composites with the STF matrix was investigated by using a drop-weight low-velocity impact test. The experimental results revealed the STF improved the compressive and cushioning performance of the composites such that with increasing its concentration, further improvement was observed. The five-ply composite containing the STF of 30 wt% silica nanoparticles and 1 wt% carbon nanotubes (CNTs) reduced the applied peak force by 56% and 26% compared to a steel plate and five-ply neat samples, respectively. A series of repeated impacts was performed, and it was found that the performance of high-concentration composites is further decreased under this type of loading.


Author(s):  
Qianyun He ◽  
Saisai Cao ◽  
Yunpeng Wang ◽  
Shouhu Xuan ◽  
Pengfei Wang ◽  
...  

2011 ◽  
Vol 53 (2) ◽  
pp. 172-182 ◽  
Author(s):  
E. G. Vlakh ◽  
Yu. N. Sergeeva ◽  
T. G. Evseeva ◽  
N. N. Saprykina ◽  
A. Yu. Men’shikova ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document