Effect of Drying Temperature and Pretreatment on Protein Content and Color Changes during Fluidized Bed Drying of Finger Millets (Ragi,Eleusine coracana) Sprouts

2013 ◽  
Vol 31 (5) ◽  
pp. 507-518 ◽  
Author(s):  
S. P. Shingare ◽  
B. N. Thorat
2020 ◽  
Vol 63 (3) ◽  
pp. 583-595 ◽  
Author(s):  
Kaushik Luthra ◽  
Sammy S. Sadaka

Highlights Fluidized bed drying of rice has several advantages that outweigh its disadvantages. Increasing the drying temperature above 60°C could reduce rice quality. Research related to energy and exergy efficiencies in fluidized bed dryers of rice is needed. Abstract. Rice (Oryza sativa L.) is a staple food for more than half the world’s population. World rice production reached approximately 740 million metric tons (MMT) in 2018 due to the ever-increasing demand driven by population and economic growth. Rice producers face challenges in meeting this demand, especially in developing countries where rice is prone to spoilage if the moisture content is not reduced to a safe level shortly after harvest. Rice producers, particularly in developing countries, typically use conventional drying methods, i.e., sun drying and natural air drying. These methods are time-consuming and environmentally dependent. On the other hand, fluidized bed drying, which is a well established technology, could provide rice producers with an effective drying technique that is quick, practical, affordable, and portable. Several innovative designs for fluidized bed dryers have been developed that could be installed on-farm or off-farm at a reasonable cost. Some studies have mentioned that the main advantage of fluidized bed drying is the increase in drying rate and the reduction of rice spoilage after harvest. Conversely, other studies have raised alarms regarding low rice quality, which is seen as a significant flaw of fluidized bed drying. Due to this lack of consensus, there is a great need to review this drying technology objectively. Therefore, this review article explores fluidized bed drying and details its advantages and disadvantages related to rice drying. It also sheds light on the effects of the operating parameters involved in fluidized bed drying, i.e., rice moisture content, drying temperature, airflow rate, air velocity, drying duration, and tempering duration, on dryer performance and rice quality. Several fluidized bed numerical models are also reviewed and evaluated. Additionally, this review explores the energy and exergy efficiencies of fluidized bed dryers and suggests opportunities for research associated with fluidized bed drying of rice. Keywords: Energy, Exergy, Fluidized bed drying, Fluidized bed modeling, Moisture content, Rice quality, Rough rice, Tempering.


2004 ◽  
Vol 22 (7) ◽  
pp. 1731-1754 ◽  
Author(s):  
Supawan Tirawanichakul ◽  
Somkiat Prachayawarakorn ◽  
Warunee Varanyanond ◽  
Patcharee Tungtrakul ◽  
Somchart Soponronnarit

Author(s):  
Sueli Rodrigues ◽  
Thatyane Vidal Fonteles ◽  
Ronnyely Braz Reis Do Nascimento ◽  
Fabiano Andre Narciso Fernandes

Fluidized bed drying is a method for controlled and mild drying of wetThis study aimed to evaluate the effects of ozone pretreatment on drying of green apple carried out in a fluidized bed dryer to determine drying kinetics and identify operating parameters for improved product quality. Results reveal that drying temperature in different levels affected water diffusivity and retention of bioactive compounds. The ozone pretreatment showed unexpected results since the pretreatment reduced the water difusivity and promoted an increase in the enzyme activity. The treatment time strongly afftected the final polyphenoloxidase and peroxidase activities. On the other hand, the ozone treatment resulted in lower color changes compared to non-ozone treated dried apples.Keywords: diffusivity; polyphenoloxidase; enzymatic browning; ozone.


2014 ◽  
Vol 10 (1) ◽  
pp. 167-181 ◽  
Author(s):  
Masoud Hashemi Shahraki ◽  
Seid Mahdi Jafari ◽  
Mana Mashkour ◽  
Ebrahim Esmaeilzadeh

Abstract Optimization of fluidized bed drying of sesame seeds was done by response surface methodology (RSM) and genetic algorithms (GA). Effect of drying parameters (drying temperature (40, 50, 60°C), drying time (60, 120, 180 min), air velocity (1, 1.5, 2 m/s) and bed depth of dryer (1–3 cm) was investigated based on the quality attributes of dried seeds. These factors were optimized with respect to the moisture ratio, color indices, and texture parameters (hardness and fracturability). The obtained models showed very well fitness with experimental data. The coefficients of resulting models with RSM were further optimized using GA. It was revealed that GA-optimized models have better fitness with the experimental results than RSM models. Our results suggest that sesame seed dried in 40–45°C for 115–120 min with 1 m/s air velocity had the lowest moisture content and color changes and the best texture.


2009 ◽  
Vol 95 (3) ◽  
pp. 517-524 ◽  
Author(s):  
Petcharat Jaiboon ◽  
Somkiat Prachayawarakorn ◽  
Sakamon Devahastin ◽  
Somchart Soponronnarit

Foods ◽  
2019 ◽  
Vol 8 (5) ◽  
pp. 147 ◽  
Author(s):  
Saheeda Mujaffar ◽  
Sheena Ramsumair

Pumpkin seeds are a major agricultural waste from the fresh-cut produce industry. The objective of this study was to investigate the drying behavior of untreated, whole pumpkin seeds in a fluidized bed dryer at 50–80 °C (2.87 m/s), with a view to producing a high-quality pumpkin powder from dried seeds. Seeds were dried at 50–80 °C to an average equilibrium moisture value of 0.035 to 0.006 g H2O/g DM (3.4 to 0.6% wb). Drying occurred in the falling rate period only and drying rate constants ranged from 0.0226 to 0.0900 1/min with corresponding diffusivity values for the first falling-rate period ranging from 4.68 to 18.63 × 10−10 m2/s. The activation energy (Ea)—for the first falling rate period was determined to be 43.9 kJ/mol. Of the nineteen thin layer models tested, the Alibas model could be successfully used as a general model to predict the Moisture Ratio (MR) data for all temperatures investigated. After drying, seeds were blended to produce powders, which were found to be high in fat, crude protein and fiber.


2011 ◽  
Vol 29 (11) ◽  
pp. 1325-1331 ◽  
Author(s):  
Deyong Yang ◽  
Zhenhua Wang ◽  
Xiaoli Huang ◽  
Zhifeng Xiao ◽  
Xiangdong Liu

Sign in / Sign up

Export Citation Format

Share Document