Mechanical Properties of Core-Shell Rubber (CSR)/Diallyl Phthalate (DAP)/Epoxy Systems for Electronic Packaging Materials

2011 ◽  
Vol 539 (1) ◽  
pp. 190/[530]-195/[535] ◽  
Author(s):  
Youngran Jo ◽  
Youngson Choe
2021 ◽  
Vol 2 (2) ◽  
pp. 419-430
Author(s):  
Ankur Bajpai ◽  
James R. Davidson ◽  
Colin Robert

The tensile fracture mechanics and thermo-mechanical properties of mixtures composed of two kinds of epoxy resins of different chemical structures and functional groups were studied. The base resin was a bi-functional epoxy resin based on diglycidyl ether of bisphenol-A (DGEBA) and the other resins were (a) distilled triglycidylether of meta-amino phenol (b) 1, 6–naphthalene di epoxy and (c) fluorene di epoxy. This research shows that a small number of multifunctional epoxy systems, both di- and tri-functional, can significantly increase tensile strength (14%) over neat DGEBA while having no negative impact on other mechanical properties including glass transition temperature and elastic modulus. In fact, when compared to unmodified DGEBA, the tri-functional epoxy shows a slight increase (5%) in glass transition temperature at 10 wt.% concentration. The enhanced crosslinking of DGEBA (90 wt.%)/distilled triglycidylether of meta-amino phenol (10 wt.%) blends may be the possible reason for the improved glass transition. Finally, the influence of strain rate, temperature and moisture were investigated for both the neat DGEBA and the best performing modified system. The neat DGEBA was steadily outperformed by its modified counterpart in every condition.


Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2588
Author(s):  
Mansuri M. Tosif ◽  
Agnieszka Najda ◽  
Aarti Bains ◽  
Grażyna Zawiślak ◽  
Grzegorz Maj ◽  
...  

In recent years, scientists have focused on research to replace petroleum-based components plastics, in an eco-friendly and cost-effective manner, with plant-derived biopolymers offering suitable mechanical properties. Moreover, due to high environmental pollution, global warming, and the foreseen shortage of oil supplies, the quest for the formulation of biobased, non-toxic, biocompatible, and biodegradable polymer films is still emerging. Several biopolymers from varied natural resources such as starch, cellulose, gums, agar, milk, cereal, and legume proteins have been used as eco-friendly packaging materials for the substitute of non-biodegradable petroleum-based plastic-based packaging materials. Among all biopolymers, starch is an edible carbohydrate complex, composed of a linear polymer, amylose, and amylopectin. They have usually been considered as a favorite choice of material for food packaging applications due to their excellent forming ability, low cost, and environmental compatibility. Although the film prepared from bio-polymer materials improves the shelf life of commodities by protecting them against interior and exterior factors, suitable barrier properties are impossible to attain with single polymeric packaging material. Therefore, the properties of edible films can be modified based on the hydrophobic–hydrophilic qualities of biomolecules. Certain chemical modifications of starch have been performed; however, the chemical residues may impart toxicity in the food commodity. Therefore, in such cases, several plant-derived polymeric combinations could be used as an effective binary blend of the polymer to improve the mechanical and barrier properties of packaging film. Recently, scientists have shown their great interest in underutilized plant-derived mucilage to synthesize biodegradable packaging material with desirable properties. Mucilage has a great potential to produce a stable polymeric network that confines starch granules that delay the release of amylose, improving the mechanical property of films. Therefore, the proposed review article is emphasized on the utilization of a blend of source and plant-derived mucilage for the synthesis of biodegradable packaging film. Herein, the synthesis process, characterization, mechanical properties, functional properties, and application of starch and mucilage-based film are discussed in detail.


2012 ◽  
Vol 21 (12) ◽  
pp. 855-868 ◽  
Author(s):  
Morteza Ahmadi ◽  
Mohammad Reza Moghbeli ◽  
Mahmood M. Shokrieh

2018 ◽  
Vol 163 ◽  
pp. 02002 ◽  
Author(s):  
Elzbieta Horszczaruk ◽  
Roman Jedrzejewski ◽  
Jolanta Baranowska ◽  
Ewa Mijowska

The results of investigation of the cement composites modified with 5% of silica-magnetite nanostructures of the core-shell type are presented in the paper. The nanoindentation method employing three-sided pyramidal Berkovich indenter was used in the research. The mechanical properties and microstructure of the modified cement composites were evaluated on the basis of the values of hardness and indentation modulus measured inside the cement matrix and in the aggregate-paste interfacial zone. The results were compared with those obtained for the reference composites without nanostructures. The positive influence of the presence of silica-magnetite nanoparticles on the tested properties was found out.


2019 ◽  
Vol 40 (10) ◽  
pp. 3805-3813 ◽  
Author(s):  
Kamila Gosz ◽  
Józef Haponiuk ◽  
Aleksandra Mielewczyk‐Gryń ◽  
Łukasz Piszczyk

Sign in / Sign up

Export Citation Format

Share Document