scholarly journals Experience of Using EasyEDA to Develop Training Boards on the PIC16f887 Microcontroller

2021 ◽  
Vol 2096 (1) ◽  
pp. 012098
Author(s):  
V Kh Abdrakhmanov ◽  
R B Salikhov ◽  
S A Popov
Keyword(s):  
Computer Aided Design ◽  
Liquid Crystal Display ◽  
Low Cost ◽  
Temperature Sensors ◽  
Stepper Motor ◽  
Serial Port ◽  
Analog To Digital ◽  
Cad System ◽  
Microprocessor Technology ◽  
Aided Design

Abstract A brief overview of computer-aided design (CAD) systems widely used in Russia is presented, and the main requirements for tracing PCB boards are given. The main features of the actively developing cloud CAD system EasyEDA are shown, and the expediency of its use is justified. The idea of creating low-cost electronic training boards based on the PIC16F887 microcontroller for studying the basics of microprocessor technology is presented. Electronic training boards demonstrate all the capabilities of the microcontroller – the operation of the I/O ports, serial port, analog-to-digital converter( ADC), with a two-line liquid crystal display (LCD), with temperature sensors, with a DC motor, with a stepper motor, etc. The experience of developing a budget electronic training boards based on a PIC microcontroller in EasyEDA, which can be used to study the programming of microcontrollers, is shown. Shown are the possibilities of using the jlcpcb.com service to order PCB boards in the largest PCB prototyping enterprise in China, called JLCPCB.

Fabrication of 3D Temperature Sensor Using Magnetostrictive Inkjet Printhead

2020 ◽  
Vol 64 (5) ◽  
pp. 50405-1-50405-5
Author(s):  
Young-Woo Park ◽  
Myounggyu Noh
Keyword(s):  
Flexible Electronics ◽  
Inkjet Printing ◽  
Temperature Sensor ◽  
Computer Aided Design ◽  
Low Cost ◽  
Three Dimensional ◽  
Drop On Demand ◽  
Aided Design ◽  
Nanoparticle Ink ◽  
Inkjet Printhead

Abstract Recently, the three-dimensional (3D) printing technique has attracted much attention for creating objects of arbitrary shape and manufacturing. For the first time, in this work, we present the fabrication of an inkjet printed low-cost 3D temperature sensor on a 3D-shaped thermoplastic substrate suitable for packaging, flexible electronics, and other printed applications. The design, fabrication, and testing of a 3D printed temperature sensor are presented. The sensor pattern is designed using a computer-aided design program and fabricated by drop-on-demand inkjet printing using a magnetostrictive inkjet printhead at room temperature. The sensor pattern is printed using commercially available conductive silver nanoparticle ink. A moving speed of 90 mm/min is chosen to print the sensor pattern. The inkjet printed temperature sensor is demonstrated, and it is characterized by good electrical properties, exhibiting good sensitivity and linearity. The results indicate that 3D inkjet printing technology may have great potential for applications in sensor fabrication.

A CAD System for Designers’ Decision Making: An Approach With 2D and 3D Integrated and Hierarchical Assembly Models

1991 ◽  
Author(s):  
S. Minami ◽  
T. Ishida ◽  
S. Yamamoto ◽  
K. Tomita ◽  
M. Odamura
Keyword(s):  
Decision Making ◽  
Computer Aided Design ◽  
Mechanical Design ◽  
Prototype System ◽  
Dimensional Model ◽  
3 Dimensional ◽  
Hierarchical Assembly ◽  
Cad System ◽  
Aided Design ◽  
2D And 3D

Abstract A concept for the initial stage of the mechanical design and its implementation in the computer-aided design (CAD) are presented. The process of decision making in design is: (1) determining an outline of the whole assembly using a 2-dimensional model that is easy to operate; (2) checking the outline using a 3-dimensional model in which it is easy to identify the spatial relationships; (3) determining details of its sub-assemblies or their components using the 2-dimensional model; and (4) checking the details using the 3-dimensional model. The CAD system must provide consistent relationships through all the steps. For that, following functions are implemented in our prototype system: (1) a 2D and 3D integrated model for consistency between 2- and 3-dimensional shapes, (2) a hierarchical assembly model with dimensional constraints for consistency within an assembly and their components, and (3) a check on constraints for consistency between shapes and designers’ intentions. As a result, the system can provide an environment well fitted to the designers’ decision making process.

scholarly journals Computer Numerically Controlled Drawing Robot Based on Computer-Aided Design

2021 ◽  
Author(s):  
Antor Mahamudul Hashan ◽  
Abdullah Haidari ◽  
Srishti Saha ◽  
Titas Paul
Keyword(s):  
Open Source ◽  
Computer Aided Design ◽  
Low Cost ◽  
Rapid Development ◽  
Main Idea ◽  
Numerical Control ◽  
Computer Aided ◽  
Complex Circuits ◽  
Open Source Hardware ◽  
Aided Design

Due to the rapid development of technology, the use of numerically controlled machines in the industry is increasing. The main idea behind this paper is computer-aided design (CAD) based low-cost computer numerical control 2D drawing robot that can accurately draw complex circuits, diagrams, logos, etc. The system is created using open-source hardware and software, which makes it available at a low cost. The open-source LibreCAD application has been used for computer-aided design. Geometric data of a CAD model is converted to coordinate points using the python-based F-Engrave application. This system uses the Arduino UNO board as a signal generator of the universal g-code sender without compromising the performance. The proposed drawing robot is designed as a low-cost robot for educational purposes and aims to increase the student's interest in robotics and computer-aided design (CAD) skills to the next level. The drawing robot structure has been developed, and it meets the requirements of low cost with satisfactory experimental results.

Iterative Part Design With a Virtual Reality Interface

1996 ◽  
Author(s):  
S. N. Trika ◽  
P. Banerjee ◽  
R. L. Kashyap
Keyword(s):  
Virtual Reality ◽  
Computer Aided Design ◽  
Three Dimensions ◽  
Mechanical Parts ◽  
Cad System ◽  
Current State ◽  
Feature Based ◽  
New Feature ◽  
Feature Based Design ◽  
Aided Design

Abstract A virtual reality (VR) interface to a feature-based computer-aided design (CAD) system promises to provide a simple interface to a designer of mechanical parts, because it allows intuitive specification of design features such as holes, slots, and protrusions in three-dimensions. Given the current state of a part design, the designer is free to navigate around the part and in part cavities to specify the next feature. This method of feature specification also provides directives to the process-planner regarding the order in which the features may be manufactured. In iterative feature-based design, the existing part cavities represent constraints as to where the designer is allowed to navigate and place the new feature. The CAD system must be able to recognize the part cavities and enforce these constraints. Furthermore, the CAD system must be able to update its knowledge of part cavities when the new feature is added. In this paper, (i) we show how the CAD system can enforce the aforementioned constraints by exploiting the knowledge of part cavities and their adjacencies, and (ii) present efficient methods for updates of the set of part cavities when the designer adds a new feature.

Design and Implementation of an Intelligent CAD System

1987 ◽  
Author(s):  
M. J. Jakiela ◽  
P. Y. Papalambros
Keyword(s):  
Computer Aided Design ◽  
Design System ◽  
Knowledge Based Systems ◽  
Production Rules ◽  
Automated Assembly ◽  
Cad System ◽  
Design And Implementation ◽  
Knowledge Based ◽  
System Requirements ◽  
Aided Design

Abstract System requirements and system design for integrating a production rule program and a computer aided design system are presented. An implementation using a commercially available graphics modeling system is described. A “suggestive mode” interface is programmed as an example with application to design for automated assembly. Initial use of the implementation indicates that encoding production rules is more difficult than with conventional text-only knowledge-based systems, but that this system is a more effective way to use artificial intelligence techniques in design.

Simultaneous Computer-Aided Design of Rotational Plastic Parts

1993 ◽  
Author(s):  
Colin Chong ◽  
Kiyoshi Sogabe ◽  
Kosuke Ishii
Keyword(s):  
Injection Molding ◽  
Dynamic Characteristics ◽  
Computer Aided Design ◽  
Critical Speed ◽  
Dynamic Balance ◽  
Cad System ◽  
Compatibility Analysis ◽  
Computer Aided ◽  
Plastic Parts ◽  
Aided Design

Abstract This paper addresses the problem of balancing rotational plastic parts during the early stages of design. The study develops an interactive methodology that uses a solid modeling CAD system and considers injection molding concerns simultaneously with static and dynamic balance. The Transfer Matrix Method evaluates the dynamic characteristics by predicting the approximate critical speed of the part. Design Compatibility Analysis (DCA) checks for injection molding guidelines. Using these evaluation modules interactively, designers can develop a functional and manufacturable part quickly.

Geometric Modelling and Computer-Aided Design

2009 ◽  
pp. 1-31
Author(s):  
Xun Xu
Keyword(s):  
Computer Aided Design ◽  
Data Exchange ◽  
Geometric Model ◽  
Point Of View ◽  
Geometric Modelling ◽  
Cad Systems ◽  
Cad System ◽  
Wire Frame ◽  
Computer Aided ◽  
Aided Design

One of the key activities in any product design process is to develop a geometric model of the product from the conceptual ideas, which can then be augmented with further engineering information pertaining to the application area. For example, the geometric model of a design may be developed to include material and manufacturing information that can later be used in computer-aided process planning and manufacturing (CAPP/CAM) activities. A geometric model is also a must for any engineering analysis, such as finite elopement analysis (FEA). In mathematic terms, geometric modelling is concerned with defining geometric objects using computational geometry, which is often, represented through computer software or rather a geometric modelling kernel. Geometry may be defined with the help of a wire-frame model, surface model, or solid model. Geometric modelling has now become an integral part of any computer-aided design (CAD) system. In this chapter, various geometric modelling approaches, such as wire-frame, surface, and solid modelling will be discussed. Basic computational geometric methods for defining simple entities such as curves, surfaces, and solids are given. Concepts of parametric, variational, history-based, and history-free CAD systems are explained. These topics are discussed in this opening chapter because (a) CAD was the very first computer-aided technologies developed and (b) its related techniques and methods have been pervasive in the other related subjects like computer-aided manufacturing. This chapter only discusses CAD systems from the application point of view; CAD data formats and data exchange issues are covered in the second chapter.

scholarly journals Feature-based translation of CAD models with macro-parametric approach: issues of feature mapping, persistent naming, and constraint translation

2020 ◽  
Vol 7 (5) ◽  
pp. 603-614 ◽  
Author(s):  
Mutahar Safdar ◽  
Tahir Abbas Jauhar ◽  
Youngki Kim ◽  
Hanra Lee ◽  
Chiho Noh ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Parametric Approach ◽  
Model Data ◽  
Feature Mapping ◽  
Product Model ◽  
Cad Systems ◽  
Cad System ◽  
Cad Models ◽  
Feature Based ◽  
Aided Design

Abstract Feature-based translation of computer-aided design (CAD) models allows designers to preserve the modeling history as a series of modeling operations. Modeling operations or features contain information that is required to modify CAD models to create different variants. Conventional formats, including the standard for the exchange of product model data or the initial graphics exchange specification, cannot preserve design intent and only geometric models can be exchanged. As a result, it is not possible to modify these models after their exchange. Macro-parametric approach (MPA) is a method for exchanging feature-based CAD models among heterogeneous CAD systems. TransCAD, a CAD system for inter-CAD translation, is based on this approach. Translators based on MPA were implemented and tested for exchange between two commercial CAD systems. The issues found during the test rallies are reported and analyzed in this work. MPA can be further extended to remaining features and constraints for exchange between commercial CAD systems.

An Automated Process Sequence Design and Finite Element Simulation of Axisymmetric Deep Drawn Components

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
Ali Fazli ◽  
Behrooz Arezoo ◽  
Mohammad H. Hasanniya
Keyword(s):  
Finite Element ◽  
Computer Aided Design ◽  
Die Design ◽  
Automatic Process ◽  
Blank Holder ◽  
Cad System ◽  
Process Sequence ◽  
Element Simulation ◽  
Process Sequence Design ◽  
Aided Design

A computer-aided design (CAD) system is developed for automatic process design and finite element (FE) modeling of axisymmetric deep drawn components. Using the theoretical and experimental rules, the system initially designs the process sequence of the component. The obtained process sequence is automatically modeled in abaqus software and the system tests whether failure occurs. The failure is supposed to happen when the fracture is predicted in FE simulation. If failure is predicted, the system changes the appropriate process parameters and carries out the simulation process again until all drawing stages are successful. The system returns the requested parameters for die design such as part geometries in middle stages, drawing forces, blank-holder forces, die, and punch profiles radii. The system is successfully tested for some components found in industry and handbooks.

Sign in / Sign up

Export Citation Format

Share Document