Fabrication of 3D Temperature Sensor Using Magnetostrictive Inkjet Printhead

2020 ◽  
Vol 64 (5) ◽  
pp. 50405-1-50405-5
Author(s):  
Young-Woo Park ◽  
Myounggyu Noh
Keyword(s):  
Flexible Electronics ◽  
Inkjet Printing ◽  
Temperature Sensor ◽  
Computer Aided Design ◽  
Low Cost ◽  
Three Dimensional ◽  
Drop On Demand ◽  
Aided Design ◽  
Nanoparticle Ink ◽  
Inkjet Printhead

Abstract Recently, the three-dimensional (3D) printing technique has attracted much attention for creating objects of arbitrary shape and manufacturing. For the first time, in this work, we present the fabrication of an inkjet printed low-cost 3D temperature sensor on a 3D-shaped thermoplastic substrate suitable for packaging, flexible electronics, and other printed applications. The design, fabrication, and testing of a 3D printed temperature sensor are presented. The sensor pattern is designed using a computer-aided design program and fabricated by drop-on-demand inkjet printing using a magnetostrictive inkjet printhead at room temperature. The sensor pattern is printed using commercially available conductive silver nanoparticle ink. A moving speed of 90 mm/min is chosen to print the sensor pattern. The inkjet printed temperature sensor is demonstrated, and it is characterized by good electrical properties, exhibiting good sensitivity and linearity. The results indicate that 3D inkjet printing technology may have great potential for applications in sensor fabrication.

The development of a low-cost three-dimensional printed shoulder, arm, and hand prostheses for children

2016 ◽  
Vol 41 (2) ◽  
pp. 205-209 ◽  
Author(s):  
Jorge M Zuniga ◽  
Adam M Carson ◽  
Jean M Peck ◽  
Thomas Kalina ◽  
Rakesh M Srivastava ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Low Cost ◽  
Three Dimensional ◽  
Cost Effective ◽  
Research Participant ◽  
The Body ◽  
Shoulder Prosthesis ◽  
Main Function ◽  
And Performance ◽  
Aided Design

Background and aim: The prosthetic options for higher level amputees are limited and costly. Advancements in computer-aided design programs and three-dimensional printing offer the possibility of designing and manufacturing transitional prostheses at very low cost. The aim of this project was to describe an inexpensive three-dimensional printed mechanical shoulder prosthesis to assist a pre-selected subject in performing bi-manual activities. Technique: The main function of the body-powered, manually adjusted three-dimensional printed shoulder prosthesis is to provide a cost-effective, highly customized transitional device to individuals with congenital or acquired forequarter amputations. Discussion: After testing the prototype on a young research participant, a partial correction of the patient’s spinal deviation was noted due to the counterweight of the device. The patient’s family also reported improved balance and performance of some bimanual activities after 2 weeks of using the device. Limitations of the design include low grip strength and low durability. Clinical relevance The prosthetic options for higher level amputees are limited and costly. The low-cost three-dimensional printed shoulder prosthesis described in this study can be used as a transitional device in preparation for a more sophisticated shoulder prosthesis.

scholarly journals Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels

2015 ◽  
Vol 1 (9) ◽  
pp. e1500758 ◽  
Author(s):  
Thomas J. Hinton ◽  
Quentin Jallerat ◽  
Rachelle N. Palchesko ◽  
Joon Hyung Park ◽  
Martin S. Grodzicki ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Low Cost ◽  
Three Dimensional ◽  
Imaging Data ◽  
Three Dimensional Printing ◽  
Optical Computed Tomography ◽  
Biological Structures ◽  
Open Source Hardware ◽  
Aided Design ◽  
Human Brains

We demonstrate the additive manufacturing of complex three-dimensional (3D) biological structures using soft protein and polysaccharide hydrogels that are challenging or impossible to create using traditional fabrication approaches. These structures are built by embedding the printed hydrogel within a secondary hydrogel that serves as a temporary, thermoreversible, and biocompatible support. This process, termed freeform reversible embedding of suspended hydrogels, enables 3D printing of hydrated materials with an elastic modulus <500 kPa including alginate, collagen, and fibrin. Computer-aided design models of 3D optical, computed tomography, and magnetic resonance imaging data were 3D printed at a resolution of ~200 μm and at low cost by leveraging open-source hardware and software tools. Proof-of-concept structures based on femurs, branched coronary arteries, trabeculated embryonic hearts, and human brains were mechanically robust and recreated complex 3D internal and external anatomical architectures.

scholarly journals Automatized Evaluation of Students’ CAD Models

2021 ◽  
Vol 11 (4) ◽  
pp. 145
Author(s):  
Nenad Bojcetic ◽  
Filip Valjak ◽  
Dragan Zezelj ◽  
Tomislav Martinec
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Computer Application ◽  
Test Cases ◽  
Cad Model ◽  
Computer Solution ◽  
3D Cad ◽  
Computer Aided ◽  
Cad Models ◽  
Aided Design

The article describes an attempt to address the automatized evaluation of student three-dimensional (3D) computer-aided design (CAD) models. The driving idea was conceptualized under the restraints of the COVID pandemic, driven by the problem of evaluating a large number of student 3D CAD models. The described computer solution can be implemented using any CAD computer application that supports customization. Test cases showed that the proposed solution was valid and could be used to evaluate many students’ 3D CAD models. The computer solution can also be used to help students to better understand how to create a 3D CAD model, thereby complying with the requirements of particular teachers.

scholarly journals Computer-aided design of multi-purpose steel headframes for mines with a new technical level

2020 ◽  
Vol 174 ◽  
pp. 01048
Author(s):  
Elena Kassikhina ◽  
Vladimir Pershin ◽  
Nina Rusakova
Keyword(s):  
Cross Sections ◽  
Computer Aided Design ◽  
Information Technologies ◽  
Three Dimensional ◽  
Numerical Control ◽  
Technical Level ◽  
Resource Saving ◽  
Existing Structures ◽  
Set Up ◽  
Aided Design

The existing structures of the steel sinking headgear and permanent headframe do not meet the requirements of resource saving (metal consumption and manpower input at installation), and the present methods of the headframe designing do not fully reflect recent possibilities of applying of the advanced information technologies. Technical level of the modern software makes it possible for designers to set up multiple numerical experiments to create a computer simulation that allows solving the problem without field and laboratory experiments, and therefore without special costs. In this regard, a mathematical simulation has been developed and based on it, software to select cross-sections of multi- purpose steel headframe elements and to calculate proper weight of its metal structures depending on the characteristics and hoisting equipment. A headframe drawing is displayed, as the results of the software work, including list of elements, obtained optimal hoisting equipment in accordance with the initial data. The software allows speeding up graphic work and reducing manpower input on calculations and paper work. The software allows developing a three-dimensional image of the structure and its functional blocks, based on the obtained initial parameters, as well as developing control software for units with numerical control (NC) in order to manufacture multi-purpose headframes.

The generation of adaptive assembly from predicting change propagation

2015 ◽  
Vol 35 (3) ◽  
pp. 269-280 ◽  
Author(s):  
Hu Qiao ◽  
Rong Mo ◽  
Ying Xiang
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Original Method ◽  
Change Propagation ◽  
Assembly Model ◽  
Practical Application ◽  
Content Type ◽  
Design Structure ◽  
Aided Design ◽  
Practical Implications

Purpose – The purpose of this paper is to establish an adaptive assembly, to realize the adaptive changing of the models and to improve the flexibility and reliability of assembly change. For a three-dimensional (3D) computer-aided design (CAD) assembly in a changing process, there are two practical problems. One is delivering parameters’ information not smoothly. The other one is to easily destroy an assembly structure. Design/methodology/approach – The paper establishes associated parameters design structure matrix of related parts, and predicts possible propagation paths of the parameters. Based on the predicted path, structured storage is made for the affected parameters, tolerance range and the calculation relations. The study combines structured path information and all constrained assemblies to build the adaptive assembly, proposes an adaptive change algorithm for assembly changing and discusses the extendibility of the adaptive assembly. Findings – The approach would improve the flexibility and reliability of assembly change and be applied to different CAD platform. Practical implications – The examples illustrate the construction and adaptive behavior of the assembly and verify the feasibility and reasonability of the adaptive assembly in practical application. Originality/value – The adaptive assembly model proposed in the paper is an original method to assembly change. And compared with other methods, good results have been obtained.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

Analysing the Natural Resting Aspects of a Component for Automated Assembly

1995 ◽  
Vol 209 (2) ◽  
pp. 125-131 ◽  
Author(s):  
B K A Ngoi ◽  
L E N Lim ◽  
S S G Lee ◽  
S W Lye
Keyword(s):  
Cross Sections ◽  
Computer Aided Design ◽  
Energy Barrier ◽  
Three Dimensional ◽  
Rectangular Prism ◽  
Automatic Assembly ◽  
Automated Assembly ◽  
Barrier Method ◽  
Aided Design ◽  
Natural Resting Aspect

This paper proposes the construction of an energy envelope that can be used to advantage with the energy barrier method to analyse the natural resting aspect of engineering parts destined for automatic assembly. Unlike the energy barrier method, the energy envelope does not require any visualization of the projection of the energy barrier on the aspect of interest. The energy envelope is the three-dimensional topology of the changes in height of the centroid, as the part attempts changes of aspect. The paper describes how it may be computed in a CAD (computer aided design) solid modeller. The results of applying the energy envelope to prisms of square and cylindrical cross-sections are the same as those predicted by the energy barrier method. When extended to the analysis of a rectangular prism, the results were consistent with Boothroyd's dynamic solution and Boothroyd's experimental data. This conclusion is encouraging as there is no irrefutable evidence that the energy barrier method may be applied to the analysis of the rectangular prism.

Simulation of Three-Dimensional Stress Distribution in Compression Dies

2008 ◽  
Vol 575-578 ◽  
pp. 449-454
Author(s):  
Chu Yun Huang ◽  
Sai Yu Wang ◽  
Tao Yang ◽  
Xu Dong Yan
Keyword(s):  
Stress Distribution ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Distribution Model ◽  
Extrusion Dies ◽  
Maximum Value ◽  
Multiple Unit ◽  
Stress Freezing Method ◽  
Experimental Values ◽  
Aided Design

The stress fields of rectangular and T shape compression dies were simulated by three dimensional photo-elasticity of stress freezing method. The rules of stress distribution of σx, σy, σz on the surface of rectangular and T-shaped dies were discovered, and the rules were also found inside the dies. The results indicate that the stress distribution of rectangular die is similar to that of T shape die. Obvious stress concentration in corner of die hole was observed. σz rises from die hole to periphery until it achieves maximum value then it diminishes gradually, and σz between die hole and fix diameter zone is higher than it is in other position. At the same time, the equations of stress field of extrusion dies were obtained by curved surface fitting experimental values in every observed point with multiple-unit regression analysis method and orthogonal transforms. These works can provide stress distribution model for die computer aided design and make.

Sign in / Sign up

Export Citation Format

Share Document