scholarly journals Utilization of wood sawdust as heavy metal adsorbent in paint industry waste

2021 ◽  
Vol 2098 (1) ◽  
pp. 012031
Author(s):  
Y Sukmawardani ◽  
Pitriani ◽  
P Pitriana ◽  
C Z Subarkah
Keyword(s):  
Heavy Metal ◽  
Qualitative Analysis ◽  
Adsorption Process ◽  
Waste Treatment ◽  
Industry Waste ◽  
Wood Sawdust ◽  
Sediment Formation ◽  
Before And After ◽  
Paint Industry ◽  
Heavy Metal Adsorbent

Abstract Abstract This study aims to utilize wood sawdust waste in the paint industry waste treatment. The first thing to do is a qualitative analysis of heavy metals before and after the processing. Furthermore, the parameters measured are temperature, pH, TDS, and dissolved oxygen (Dislove Oxgen). The use of wood sawdust as a heavy metal adsorbent in paint industry wastes is able to provide efficient results with no sediment formation when conducting qualitative analysis of Cu2+ and Cd2+ metal ions and raising the waste parameters to be environmentally friendly. This shows that the adsorption process works optimally.

Acute Toxicity Investigation of Landfill Leachates Treated with Fine Bubbles

2021 ◽  
Vol 41 ◽  
pp. 55-65
Author(s):  
Hikmat Kasmara ◽  
Desti Pratiwi ◽  
Sundoro Yoga Azhary ◽  
Eko Sulistyo ◽  
Camellia Panatarani ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Acute Toxicity ◽  
Toxicity Test ◽  
Waste Treatment ◽  
Probit Analysis ◽  
Acute Toxicity Test ◽  
Landfill Leachates ◽  
Leachate Treatment ◽  
Fine Bubble ◽  
Before And After

Landfill Leachates is one of the pollutants containing high organic matter and heavy metal which can cause toxic pollution to water due to less than optimal leachate processing. This study aims to introduce fine bubbles treatment to the leachate processing technology at the waste treatment facility at Sarimukti, West Java Indonesia. The toxicity test was conducted in the acute toxicity test and test for D. magna. The acute toxicity test was carried out using a static biological test according to APHA standards (1995). The LC50-48 hours ware calculates using the Finney Probit Analysis Software. The results showed that the effectiveness of Sarimukti TPA leachate treatment was 97.5% DO, 71% BOD, 86% TDS, and 74.8% turbidity. The XRF spectra on the leachate after fine bubble found a recovery of heavy metal elements such as Cr, Mn, Fe, Zn, Cu, Pb, As, and Sn. Based on the Minister of Environment and Forestry Regulation, the effectiveness of leachate processing has reached the safe standard limit for pH, mercury, cadmium parameters. The acute toxicity of leachate before and after treatment fine bubble was 14.516 ppm and 11.178 ppm. The acute toxicity of leachate is considered almost non-toxic.

scholarly journals Immutable heavy metal pollution before and after change in industrial waste treatment procedure

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Hirokazu Ozaki ◽  
Hiroshi Ichise ◽  
Emi Kitaura ◽  
Yuki Yaginuma ◽  
Masaaki Yoda ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Pollution ◽  
Heavy Metal Pollution ◽  
Industrial Waste ◽  
Waste Treatment ◽  
Treatment Procedure ◽  
Before And After ◽  
Industrial Waste Treatment

Sorption of Bisphenol A in Aqueous Solutions on Irradiated and as-Grown Multiwalled Carbon Nanotubes

2018 ◽  
Vol 69 (5) ◽  
pp. 1233-1239
Author(s):  
Raluca Madalina Senin ◽  
Ion Ion ◽  
Ovidiu Oprea ◽  
Rusandica Stoica ◽  
Rodica Ganea ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Bisphenol A ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Multiwalled Carbon Nanotubes ◽  
Adsorption Process ◽  
Sorption Process ◽  
Multiwalled Carbon ◽  
Before And After ◽  
Kinetic Sorption

In this study, non-irradiated and weathered multiwalled carbon nanotubes (MWCNTs) obtained through irradiation, were studied as adsorbents for BPA, both nanomaterials being characterized before and after the adsorption process. The objectives of our investigation were to compare the characteristics of non-irradiated and irradiated MWCNTs, to evaluate the adsorption capacity of BPA by pristine and irradiated MWCNTs and to determine the variation of the kinetic, sorption and thermodynamic parameters during sorption process using both sorbents.

scholarly journals Adsorption process and mechanism of heavy metal ions by different components of cells, using yeast (Pichia pastoris) and Cu2+ as biosorption models

RSC Advances ◽  
2021 ◽  
Vol 11 (28) ◽  
pp. 17080-17091
Author(s):  
Xinggang Chen ◽  
Zhuang Tian ◽  
Haina Cheng ◽  
Gang Xu ◽  
Hongbo Zhou
Keyword(s):  
Heavy Metal ◽  
Pichia Pastoris ◽  
Metal Ions ◽  
Cell Walls ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Yeast Pichia Pastoris ◽  
Adsorption Sites

The Cu2+ first bound to the outer mannan and finally entered the cytoplasm. During the whole adsorption process, the number of adsorption sites in the outer and middle cell walls was the largest, and then gradually decreased.

scholarly journals The application of silica-cellulose material as heavy metal adsorbent on laboratory wastewater

2021 ◽  
Author(s):  
Moch. Royanudin ◽  
Yudhi Utomo ◽  
Surjani Wonorahardjo
Keyword(s):  
Heavy Metal ◽  
Cellulose Material ◽  
Heavy Metal Adsorbent

Review of chitosan composite as a heavy metal adsorbent: Material preparation and properties

2021 ◽  
Vol 259 ◽  
pp. 117613
Author(s):  
Shabbah Begum ◽  
Nor Yuliana Yuhana ◽  
Noorashikin Md Saleh ◽  
Nur Hidayatul Nazirah Kamarudin ◽  
Abu Bakar Sulong
Keyword(s):  
Heavy Metal ◽  
Heavy Metal Adsorbent ◽  
Chitosan Composite ◽  
Material Preparation

Coatings update: heavy metal contamination in the paint industry, part 2

1983 ◽  
Vol 12 (4) ◽  
pp. 11-13 ◽  
Author(s):  
Americus
Keyword(s):  
Heavy Metal ◽  
Metal Contamination ◽  
Heavy Metal Contamination ◽  
Paint Industry

scholarly journals Reuse of Newspaper As An Adsorbent For Cu (II) Removal By Citric Acid Modification

2018 ◽  
Vol 156 ◽  
pp. 02012 ◽  
Author(s):  
Mardiah ◽  
Rif’an Fathoni ◽  
Pratiwi Pudyaningtyas ◽  
Hamdania Gamu ◽  
Rinaldy
Keyword(s):  
Citric Acid ◽  
Adsorption Process ◽  
Kinetic Studies ◽  
Order Reaction ◽  
Acid Modification ◽  
Pseudo First Order Reaction ◽  
First Order ◽  
Pseudo Second Order ◽  
Heavy Metal Adsorbent ◽  
The Impact

High Consumption of paper, bring the impact of the waste paper itself. And the utilization of the paper is limited to recycled products and crafts, whereas paper such as newspaper still contains cellulose that can be potential to be used as a heavy metal adsorbent. In this study, newspaper was dissolved in sodium bicarbonate to reduce various impurities and then was reacted with citric acid (CA). The modified adsorbent was characterized by FTIR and was tested for adsorb Cu(II) in artificial solution. After adsorption process, the solution was filtered and analysed using Atomic Absorption Spectrophotometer (AAS). The adsorption experimental data was fitted to Langmuir, Freundlich, Tempkin, and Dubinin-Radushkevich for equilibrium model and was fitted to pseudo first order reaction and pseudo second order reaction for kinetic studies. The result showed that CA-modification newspaper able to remove heavy metals Cu(II) in solution.

Sign in / Sign up

Export Citation Format

Share Document