scholarly journals Adsorption process and mechanism of heavy metal ions by different components of cells, using yeast (Pichia pastoris) and Cu2+ as biosorption models

RSC Advances ◽  
2021 ◽  
Vol 11 (28) ◽  
pp. 17080-17091
Author(s):  
Xinggang Chen ◽  
Zhuang Tian ◽  
Haina Cheng ◽  
Gang Xu ◽  
Hongbo Zhou
Keyword(s):  
Heavy Metal ◽  
Pichia Pastoris ◽  
Metal Ions ◽  
Cell Walls ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Yeast Pichia Pastoris ◽  
Adsorption Sites

The Cu2+ first bound to the outer mannan and finally entered the cytoplasm. During the whole adsorption process, the number of adsorption sites in the outer and middle cell walls was the largest, and then gradually decreased.

scholarly journals Eco-Friendly Sustainable Fluorescent Carbon Dots for the Adsorption of Heavy Metal Ions in Aqueous Environment

Nanomaterials ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 315 ◽  
Author(s):  
Musa Yahaya Pudza ◽  
Zurina Zainal Abidin ◽  
Suraya Abdul Rashid ◽  
Faizah Md Yasin ◽  
A. S. M. Noor ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Carbon Dots ◽  
Heavy Metal Ions ◽  
Active Sites ◽  
Adsorption Process ◽  
Coefficient Of Determination ◽  
Aqueous Environment ◽  
Order Kinetic ◽  
Sensing Applications

The materials and substances required for sustainable water treatment by adsorption technique, are still being researched widely by distinguished classes of researchers. Thus, the need to synthesize substances that can effectively clean up pollutants from the environment cannot be overemphasized. So far, materials in bulk forms that are rich in carbon, such as biochar and varieties of activated carbon have been used for various adsorptive purposes. The use of bulk materials for such purposes are not efficient due to minimal surface areas available for adsorption. This study explores the adsorption task at nano dimension using carbon dots (CDs) from tapioca. The properties of carbon structure and its influence on the adsorptive efficacy of carbon nanoparticles were investigated by energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), high resolution transmission electron microscopy (HrTEM), and atomic force microscopy (AFM). The results implied carbon present in CDs are good adsorbents for effective adsorption of heavy metal ions (lead) with removal efficiency of 80.6% in aqueous environment. The adsorption process as explored by both Langmuir and Freundlich isotherms have proven favorability of the adsorption process. Langmuir form two and three have correlation coefficients R2 at 0.9922 and 0.9912, respectively. The Freundlich isotherm confirms CDs as having defined surface heterogeneity and the exponential distribution of active sites. The adsorption of lead unto CDs obeyed the second order kinetic model with coefficient of determination, R2 of 0.9668 and 0.9996 at an initial lead concentration of 20 mg/L and 100 mg/L, respectively. The findings validated the efficiency of CDs derived from tapioca as an excellent material for further utilization in the environmental fields of wastewater pollution detection and clean up, bio-imaging, and chemical sensing applications.

Removal of toxic heavy metals by iron-coated starfish

2007 ◽  
Vol 56 (9) ◽  
pp. 51-57 ◽  
Author(s):  
J.K. Yang ◽  
M.R. Yu ◽  
S.M. Lee
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Strong Acid ◽  
Batch Adsorption ◽  
Toxic Heavy Metals ◽  
Solution Ph ◽  
Entire Concentration Range ◽  
Adsorption Sites ◽  
Fecl3 Solution

In this study, the applicability of calcined starfish (SF) and iron-coated SF (ICSF) as potential adsorbents for the treatment of wastewater containing heavy metal ions was evaluated. ICSF was prepared by mixing FeCl3 solution previously adjusted to pH 7 ∼ 9 with SF at 105 °C. From the dissolution test at pH 2, ICSF showed strong acid-proof properties. In the batch adsorption, Cu(II) adsorption onto ICSF was completed within 150 minutes, while 47% Cu(II) was removed with SF alone. This result clearly suggests that the coated Fe(III) serves additional adsorption sites, resulting in the enhanced removal of heavy metal ions. The removed fraction of both Cu(II) and Pb(II) increased with increasing solution pH and nearly complete removals of Pb(II) and Cu(II) were observed at around pH 6 and 8, respectively. From the adsorption isotherm of Cu(II) onto SF and ICSF at pH 3.0, the removed amount of Cu(II) by ICSF was greater than that by SF over the entire concentration range studied. In the column test, the breakthrough of Cu(II) in the ICSF column was greatly retarded compared to that in the SF column. Based on the drinking water regulations for Cu(II), SF and ICSF were able to remove 3400 and 8600 mg/kg of Cu(II) from the wastewater, respectively.

Removal of Toxic Heavy Metal Ions (Pb, Cr, Cu, Ni, Zn, Co, Hg, and Cd) from Waste Batteries or Lithium Cells Using Nanosized Metal Oxides: A Review

2020 ◽  
Vol 20 (12) ◽  
pp. 7231-7254 ◽  
Author(s):  
Yuzhe Zhang ◽  
Bin Wang ◽  
Qian Cheng ◽  
Xinling Li ◽  
Zhongyu Li
Keyword(s):  
Heavy Metal ◽  
Iron Oxide ◽  
Metal Ions ◽  
Metal Oxides ◽  
Heavy Metal Ions ◽  
Ph Value ◽  
Reaction System ◽  
Toxic Heavy Metal ◽  
Adsorption Sites ◽  
Lithium Cells

How to remove harmful heavy metal ions from waste batteries or lithium cells efficiently has been the focus of scholars. More and more metal oxides had been used to deal with the pollution of heavy metal caused by waste batteries in recent years. Nanostructured metal oxides have great potential because of their large comparative areas. The adsorption for these heavy metal ions can be further improved by using modified metal oxides as adsorbents. At present, iron oxide is widely used in this field. Other metal oxides have also been studied in removing these heavy metal ions. Compared to other metal oxides, the adsorbents made of iron oxide are easy to be separated from the reaction system. pH value in the solution can affect the activity of adsorption sites on metal oxides adsorbents and change the distribution of ions in solution. As a result, pH value can significantly influence the adsorption of metal oxides adsorbents for heavy metal ions from waste batteries or lithium cells.

scholarly journals Different Insights into Silicate Rectorite Modification and Its Role in Removal of Heavy Metal Ions from Wastewater

Minerals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 176 ◽  
Author(s):  
Ya Gao ◽  
Hao Jiang ◽  
Xianyuan Li ◽  
Sultan Ahmed Khoso ◽  
Guoyuan Xiang ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Underlying Mechanism ◽  
Xps Analysis ◽  
Adsorption Efficiency ◽  
Removal Capacity ◽  
Chloride Hexahydrate ◽  
Ferric Chloride Hexahydrate

In the field of water management, the separation of metal contaminants from wastewater is very important and challenging. This study systematically investigated the effect and underlying mechanism of silicate rectorite (REC) on the removal of heavy metal ions (Cr(VI) and Pb(II)) from wastewater. The adsorption and removal capacity of REC was further improved by its novel modification with ferric chloride hexahydrate. Compared to natural REC, the modified rectorite (Fe-REC) showed comparatively superior adsorption efficiency for both Cr(VI) and Pb(II) due to the chemisorption of Fe3+ on the REC surface as its oxidation state (Fe–O, Fe–OH, Fe–OOH). Adsorption on Cr(VI) attributed to the reaction between iron hydroxy complexes (FeOH2+, Fe(OH)2+ and Fe(OH)3(aq)) and Cr(VI) species (HCrO4− and CrO42−) in the aqueous solution. This reaction was perfectly consistent with the binding energy shifts in O 1s and Fe 2p species, as reflected by XPS analysis. While, the existence of –Al–OH and –Si–OH in silicate REC slurry reacted with PbOH+ colloids produced from lead ions hydrolysis to promote Pb(II) adsorption. Zeta potential after modification and removal occurred to shift positively or negatively to testify the adsorption of Fe3+ and heavy metal ions. Freundlich and Langmuir isotherms conformed adsorption process for Cr(VI) and Pb(II), respectively.

The influence of heavy metals on the production of extracellular polymer substances in the processes of heavy metal ions elimination

2005 ◽  
Vol 52 (10-11) ◽  
pp. 151-156 ◽  
Author(s):  
J. Mikes ◽  
M. Siglova ◽  
A. Cejkova ◽  
J. Masak ◽  
V. Jirku
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Cell Wall ◽  
Metal Ions ◽  
Cell Walls ◽  
Heavy Metal Ions ◽  
Extracellular Polymeric Substances ◽  
Low Cost ◽  
Toxic Heavy Metals ◽  
Metal Interactions

Wastewaters from a chemical industry polluted by heavy metal ions represent a hazard for all living organisms. It can mean danger for ecosystems and human health. New methods are sought alternative to traditional chemical and physical processes. Active elimination process of heavy metals ions provided by living cells, their components and extracellular products represents a potential way of separating toxic heavy metals from industrial wastewaters. While the abilities of bacteria to remove metal ions in solution are extensively used, fungi have been recognized as a promising kind of low-cost adsorbents for removal of heavy-metal ions from aqueous waste sources. Yeasts and fungi differ from each other in their constitution and in their abilities to produce variety of extracellular polymeric substances (EPS) with different mechanisms of metal interactions. The accumulation of Cd(2+), Cr(6+), Pb(2+), Ni(2+) and Zn(2+) by yeasts and their EPS was screened at twelve different yeast species in microcultivation system Bioscreen C and in the shaking Erlenmayer's flasks. This results were compared with the production of yeast EPS and the composition of yeast cell walls. The EPS production was measured during the yeast growth and cell wall composition was studied during the cultivations in the shaking flasks. At the end of the process extracellular polymers and their chemical composition were isolated and amount of bound heavy metals was characterized. The variable composition and the amount of the EPS were found at various yeast strains. It was influenced by various compositions of growth medium and also by various concentrations of heavy metals. It is evident, that the amount of bound heavy metals was different. The work reviews the possibilities of usage of various yeast EPS and components of cell walls in the elimination processes of heavy metal ions. Further the structure and properties of yeasts cell wall and EPS were discussed. The finding of mechanisms mentioned above is necessary to identify the functional groups entered in the metals elimination processes.

Adsorption of Pb2+, Cu2+ and Cr3+ on Yongnian Bentonite

2014 ◽  
Vol 1056 ◽  
pp. 16-19
Author(s):  
Shu Li Ding ◽  
Dan Dan Hou ◽  
Bo Hui Xu ◽  
Yu Zhuang Sun
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Constant Temperature ◽  
Langmuir Isotherm ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Isotherm Model ◽  
Adsorption Characteristics ◽  
Adsorption Capacities ◽  
Langmuir Isotherm Model

The Bentonite from Yongnian is Ca-Bentonite, Montmorillonite Content 52%, Colloidal Value 57ml/15g, Eca2+/CEC 53.60%. the Adsorption Characteristics of Pb2+, Cu2+ and Cr3+ onto Bentonite under Conditions of Constant Temperature and Ph have been Studied. the Results Show that the Adsorption Capacities of Heavy Metal Ions onto Bentonite from Yongnian Follow the Order of Pb2+> Cu2+> Cr3+. it is Found that the Adsorption Process of Bentonite Accords with the Langmuir Isotherm Model. the Maximum Adsorption of 3 Kinds of Metal Ions onto Bentonite is in Order of Cr3+>Cu2+>Pb2+.

Simultaneous removal of lead(II), chromium(III), and copper(II) heavy metal ions through an adsorption process using C-phenylcalix[4]pyrogallolarene material

2020 ◽  
Vol 8 (4) ◽  
pp. 103971 ◽  
Author(s):  
Jumina ◽  
Yoga Priastomo ◽  
Hamid Rohma Setiawan ◽  
Mutmainah ◽  
Yehezkiel Steven Kurniawan ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Simultaneous Removal

scholarly journals Effects of Anions on Adsorption of Trace Levels of Cu(II), Pb(II) and Cr(VI) by Amino-Functionalized Multi-Walled Carbon Nanotubes

2017 ◽  
Vol 68 (2) ◽  
pp. 362-368 ◽  
Author(s):  
Aleksandra Sucurovic ◽  
Jelena Trickovic ◽  
Snezana Maletic ◽  
Marijana Kragulj Isakovski ◽  
Akos Kukovecz ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Chemical Interaction ◽  
Multiwalled Carbon ◽  
Intra Particle Diffusion ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

This work studies the adsorption of heavy metal ions (Cu(II), Pb(II) and Cr(VI)) in aqueous solutions on amino-functionalized multiwalled carbon nanotubes (MWCNTs-NH2) in the ppb concentration range (50-3000 �g/l) as a function of contact time, initial concentration of heavy metal ions and the presence of four inorganic electrolyte anions (Cl-, SO42-, NO3-, PO43-). The adsorption of heavy metals from aqueous solution was studied using different kinetic models. The results showed that the adsorption process is best fitted with the pseudo-second-order model indicating that the process is controlled by chemisorptions through electrostatic attraction and chemical interaction/complexation between the metal ions and the surface functional groups of MWCNTs-NH2. The intra-particle diffusion model showed that diffusion is slow, but did not govern the rate of the overall adsorption process. The effects of Cl-, SO42-, NO3- and PO43- anions on the adsorption of Cu(II), Pb(II) and Cr(VI) are variable (improvement, reduction, no impact).

scholarly journals STUDI KINETIKA ADSORPSI ION Fe (III) MENGGUNAKAN LIMBAH AMPAS SAGU

2019 ◽  
Vol 9 (1) ◽  
pp. 9-17
Author(s):  
Batseba Taihuttu ◽  
V Kayadoe ◽  
A Mariwy
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Second Order ◽  
Adsorption Efficiency ◽  
Adsorption Study ◽  
Pseudo Second Order

Adsorption study of the adsorption of heavy metal ions from Fe (III) using sago dregs waste was carried out. adsorption was carried out in batches, with the mass of adsorbent is 1 g and the concentration of Fe (III) ion is 10 ppm. in this study variations in contact time were 60, 90, 120, 150 and 180 minutes to determine the kinetic suitable for the adsorption process of ion Fe (III) and the capacity and efficiency of sago dregs adsorption. The results showed that the adsorption of ion fe (III) using sago dregs followed pseudo second-order kinetics with R2 values that were closer to 1 that is 0,9651. adsorption of ion Fe (III) at optimum contact time of 90 minutes with adsorbent mass of 1 g obtained by adsorption capacity 0,3211 mg/g and the adsorption efficiency is 64,2%.

Sign in / Sign up

Export Citation Format

Share Document