Homogeneity study of a GaAs:Cr pixelated sensor by means of X-rays

AbstractOver the last twenty years, orbiting coronagraphs have vastly increased the amount of observational material for the whitelight corona. Spanning almost two solar cycles, and augmented by ground-based K-coronameter, emission-line, and eclipse observations, these data allow us to assess,inter alia: the typical and atypical behavior of the corona; how the corona evolves on time scales from minutes to a decade; and (in some respects) the relation between photospheric, coronal, and interplanetary features. This talk will review recent results on these three topics. A remark or two will attempt to relate the whitelight corona between 1.5 and 6 R⊙to the corona seen at lower altitudes in soft X-rays (e.g., with Yohkoh). The whitelight emission depends only on integrated electron density independent of temperature, whereas the soft X-ray emission depends upon the integral of electron density squared times a temperature function. The properties of coronal mass ejections (CMEs) will be reviewed briefly and their relationships to other solar and interplanetary phenomena will be noted.

Download Full-text

Emergence of Twisted Magnetic Flux Related Sigmoidal Brightening

International Astronomical Union Colloquium ◽

10.1017/s0252921100064630 ◽

2000 ◽

Vol 179 ◽

pp. 263-264

Author(s):

K. Sundara Raman ◽

K. B. Ramesh ◽

R. Selvendran ◽

P. S. M. Aleem ◽

K. M. Hiremath

Keyword(s):

Magnetic Field ◽

Magnetic Fields ◽

Magnetic Flux ◽

Ultra Violet ◽

Active Regions ◽

Morphological Properties ◽

Energy Storage And Conversion ◽

The Sun ◽

X Rays ◽

The Magnetic Field

Extended AbstractWe have examined the morphological properties of a sigmoid associated with an SXR (soft X-ray) flare. The sigmoid is cospatial with the EUV (extreme ultra violet) images and in the optical part lies along an S-shaped Hαfilament. The photoheliogram shows flux emergence within an existingδtype sunspot which has caused the rotation of the umbrae giving rise to the sigmoidal brightening.It is now widely accepted that flares derive their energy from the magnetic fields of the active regions and coronal levels are considered to be the flare sites. But still a satisfactory understanding of the flare processes has not been achieved because of the difficulties encountered to predict and estimate the probability of flare eruptions. The convection flows and vortices below the photosphere transport and concentrate magnetic field, which subsequently appear as active regions in the photosphere (Rust & Kumar 1994 and the references therein). Successive emergence of magnetic flux, twist the field, creating flare productive magnetic shear and has been studied by many authors (Sundara Ramanet al.1998 and the references therein). Hence, it is considered that the flare is powered by the energy stored in the twisted magnetic flux tubes (Kurokawa 1996 and the references therein). Rust & Kumar (1996) named the S-shaped bright coronal loops that appear in soft X-rays as ‘Sigmoids’ and concluded that this S-shaped distortion is due to the twist developed in the magnetic field lines. These transient sigmoidal features tell a great deal about unstable coronal magnetic fields, as these regions are more likely to be eruptive (Canfieldet al.1999). As the magnetic fields of the active regions are deep rooted in the Sun, the twist developed in the subphotospheric flux tube penetrates the photosphere and extends in to the corona. Thus, it is essentially favourable for the subphotospheric twist to unwind the twist and transmit it through the photosphere to the corona. Therefore, it becomes essential to make complete observational descriptions of a flare from the magnetic field changes that are taking place in different atmospheric levels of the Sun, to pin down the energy storage and conversion process that trigger the flare phenomena.

Download Full-text

The Clinical, Roentgenological and Morphological Effects of an Acute Exposure of Phosgene on the Lungs of Dogs

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100065237 ◽

1971 ◽

Vol 29 ◽

pp. 236-237

Author(s):

R. F. Bils ◽

W. F. Diller ◽

F. Huth

Keyword(s):

Latent Period ◽

Chemical Industry ◽

Toxic Substance ◽

Lung Edema ◽

X Rays ◽

Beagle Dogs ◽

Male And Female ◽

Morphological Alterations ◽

Before And After ◽

Electron Microscopes

Phosgene still plays an important role as a toxic substance in the chemical industry. Thiess (1968) recently reported observations on numerous cases of phosgene poisoning. A serious difficulty in the clinical handling of phosgene poisoning cases is a relatively long latent period, up to 12 hours, with no obvious signs of severity. At about 12 hours heavy lung edema appears suddenly, however changes can be seen in routine X-rays taken after only a few hours' exposure (Diller et al., 1969). This study was undertaken to correlate these early changes seen by the roengenologist with morphological alterations in the lungs seen in the'light and electron microscopes.Forty-two adult male and female Beagle dogs were selected for these exposure experiments. Treated animals were exposed to 94.5-107-5 ppm phosgene for 10 min. in a 15 m3 chamber. Roentgenograms were made of the thorax of each animal before and after exposure, up to 24 hrs.

Download Full-text

Chemical Species Identification in an SEM by Changes in Emitted X-Ray Energies

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100052869 ◽

1974 ◽

Vol 32 ◽

pp. 570-571

Author(s):

R. H. Duff

Keyword(s):

Species Identification ◽

Valence Electron ◽

Chemical Species ◽

X Rays ◽

Chemical Bonds ◽

Small Shift ◽

X Ray ◽

Electron Transitions ◽

Peak Energy ◽

Chemical Combination

A material irradiated with electrons emits x-rays having energies characteristic of the elements present. Chemical combination between elements results in a small shift of the peak energies of these characteristic x-rays because chemical bonds between different elements have different energies. The energy differences of the characteristic x-rays resulting from valence electron transitions can be used to identify the chemical species present and to obtain information about the chemical bond itself. Although these peak-energy shifts have been well known for a number of years, their use for chemical-species identification in small volumes of material was not realized until the development of the electron microprobe.

Download Full-text

Influence of X-Ray Induced Fluorescence on Energy Dispersive X-Ray Analysis of Thin Foils

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100079164 ◽

1977 ◽

Vol 35 ◽

pp. 328-329

Author(s):

E. A. Kenik ◽

J. Bentley

Keyword(s):

Thin Foil ◽

Electron Excitation ◽

Simple Approach ◽

Foil Thickness ◽

X Rays ◽

X Ray ◽

Hole Spectrum ◽

Illumination System ◽

Thin Foils ◽

Intensity Ratios

Cliff and Lorimer (1) have proposed a simple approach to thin foil x-ray analy sis based on the ratio of x-ray peak intensities. However, there are several experimental pitfalls which must be recognized in obtaining the desired x-ray intensities. Undesirable x-ray induced fluorescence of the specimen can result from various mechanisms and leads to x-ray intensities not characteristic of electron excitation and further results in incorrect intensity ratios.In measuring the x-ray intensity ratio for NiAl as a function of foil thickness, Zaluzec and Fraser (2) found the ratio was not constant for thicknesses where absorption could be neglected. They demonstrated that this effect originated from x-ray induced fluorescence by blocking the beam with lead foil. The primary x-rays arise in the illumination system and result in varying intensity ratios and a finite x-ray spectrum even when the specimen is not intercepting the electron beam, an ‘in-hole’ spectrum. We have developed a second technique for detecting x-ray induced fluorescence based on the magnitude of the ‘in-hole’ spectrum with different filament emission currents and condenser apertures.

Download Full-text

Structural preservation and absolute contrast of catalase crystal sections prepared with tannic acid

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010007597x ◽

1983 ◽

Vol 41 ◽

pp. 448-449

Author(s):

C.W. Akey ◽

M. Szalay ◽

S.J. Edelstein

Keyword(s):

Tannic Acid ◽

Beef Heart ◽

X Rays ◽

Screw Axis ◽

General Applicability ◽

Thin Sections ◽

Beef Liver ◽

3 Dimensional ◽

Dimensional Reconstruction ◽

Structural Preservation

Three methods of obtaining 20 Å resolution in sectioned protein crystals have recently been described. They include tannic acid fixation, low temperature embedding and grid sectioning. To be useful for 3-dimensional reconstruction thin sections must possess suitable resolution, structural fidelity and a known contrast. Tannic acid fixation appears to satisfy the above criteria based on studies of crystals of Pseudomonas cytochrome oxidase, orthorhombic beef liver catalase and beef heart F1-ATPase. In order to develop methods with general applicability, we have concentrated our efforts on a trigonal modification of catalase which routinely demonstrated a resolution of 40 Å. The catalase system is particularly useful since a comparison with the structure recently solved with x-rays will permit evaluation of the accuracy of 3-D reconstructions of sectioned crystals.Initially, we re-evaluated the packing of trigonal catalase crystals studied by Longley. Images of the (001) plane are of particular interest since they give a projection down the 31-screw axis in space group P3121. Images obtained by the method of Longley or by tannic acid fixation are negatively contrasted since control experiments with orthorhombic catalase plates yield negatively stained specimens with conditions used for the larger trigonal crystals.

Download Full-text

Diagnosis of Silica Induced Granulomatous Hypersensitivity

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100054303 ◽

1982 ◽

Vol 40 ◽

pp. 336-337

Author(s):

C. W. Mehard ◽

W. L. Epstein

Keyword(s):

Electron Microscope ◽

White Female ◽

X Rays ◽

Blood Tests ◽

Analytical Electron ◽

Analytical Electron Microscope

The underlying cause of a disease may not he readily apparent but may have a long history in development. We report one such case which was diagnosed with the aid of the analytical electron microscope.The patient, a 48 yr. old white female, developed a tender nodule on the sole of her foot in December, 1981. Subsequently additional lesions developed on the same foot resulting in deep pain and tenderness. Superficial lesions also extended up to the knee on both legs. No abnormalities were revealed in blood tests or chest X-rays.

Download Full-text

The Potentials of Scanning Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100101505 ◽

1968 ◽

Vol 26 ◽

pp. 352-353

Author(s):

A. V. Crewe

Keyword(s):

Salient Feature ◽

Secondary Emission ◽

Resolving Power ◽

X Rays ◽

Scanning Microscope ◽

Forming Process ◽

Additional Tool ◽

Detection Systems ◽

Conventional Microscope ◽

Present Information

If the resolving power of a scanning electron microscope can be improved until it is comparable to that of a conventional microscope, it would serve as a valuable additional tool in many investigations.The salient feature of scanning microscopes is that the image-forming process takes place before the electrons strike the specimen. This means that several different detection systems can be employed in order to present information about the specimen. In our own particular work we have concentrated on the use of energy loss information in the beam which is transmitted through the specimen, but there are also numerous other possibilities (such as secondary emission, generation of X-rays, and cathode luminescence).Another difference between the pictures one would obtain from the scanning microscope and those obtained from a conventional microscope is that the diffraction phenomena are totally different. The only diffraction phenomena which would be seen in the scanning microscope are those which exist in the beam itself, and not those produced by the specimen.

Download Full-text

X-ray micro tomography in the scanning electron microscope

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100107678 ◽

1978 ◽

Vol 36 (1) ◽

pp. 106-107 ◽

Cited By ~ 1

Author(s):

W. Brünger

Keyword(s):

Electron Beam ◽

Electron Microscope ◽

Scanning Electron Microscope ◽

Target Surface ◽

The Body ◽

X Rays ◽

Cross Sectional ◽

X Ray ◽

Micro Tomography ◽

Scanning Electron

Reconstructive tomography is a new technique in diagnostic radiology for imaging cross-sectional planes of the human body /1/. A collimated beam of X-rays is scanned through a thin slice of the body and the transmitted intensity is recorded by a detector giving a linear shadow graph or projection (see fig. 1). Many of these projections at different angles are used to reconstruct the body-layer, usually with the aid of a computer. The picture element size of present tomographic scanners is approximately 1.1 mm2.Micro tomography can be realized using the very fine X-ray source generated by the focused electron beam of a scanning electron microscope (see fig. 2). The translation of the X-ray source is done by a line scan of the electron beam on a polished target surface /2/. Projections at different angles are produced by rotating the object.During the registration of a single scan the electron beam is deflected in one direction only, while both deflections are operating in the display tube.

Download Full-text

Measurements in 3D images

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100086349 ◽

1991 ◽

Vol 49 ◽

pp. 408-409

Author(s):

John C. Russ

Keyword(s):

Three Dimensional ◽

Image Plane ◽

X Rays ◽

Traditional Use ◽

3D Images ◽

Confocal Scanning Laser Microscope ◽

Hard Materials ◽

Depth Direction ◽

Confocal Scanning ◽

Confocal Scanning Laser

Three-dimensional (3D) images consisting of arrays of voxels can now be routinely obtained from several different types of microscopes. These include both the transmission and emission modes of the confocal scanning laser microscope (but not its most common reflection mode), the secondary ion mass spectrometer, and computed tomography using electrons, X-rays or other signals. Compared to the traditional use of serial sectioning (which includes sequential polishing of hard materials), these newer techniques eliminate difficulties of alignment of slices, and maintain uniform resolution in the depth direction. However, the resolution in the z-direction may be different from that within each image plane, which makes the voxels non-cubic and creates some difficulties for subsequent analysis.

Download Full-text