scholarly journals Tillage unit with new design working bodies for minimal tillage

2021 ◽  
Vol 937 (3) ◽  
pp. 032049
Author(s):  
B Akhalaya ◽  
Yu Shogenov ◽  
S Starovoytov
Keyword(s):  
Fuel Consumption ◽  
Crop Yields ◽  
Acute Angle ◽  
Horizontal Surface ◽  
Back Side ◽  
Reduce Fuel Consumption ◽  
Working Bodies ◽  
Made In

Abstract The design of the tillage unit is presented, with new working bodies made in the form of a holder with rectilinear and oval parts, the rectilinear part is made in the form of a bar made at an acute angle to the horizontal surface and rigidly fixed on a rack with the possibility of dismantling. The lower part of the holder is shaped like an elongated ellipse, the upper oval part of which is a ripper, the lower-a slitter. The height of the ripper and the slitter is the same, on their butt line on the side of the toe, a groove is made for the pointed paw of the cultivator. On the back side of the paw, a groove is made for the holder, while the ratio of the length of the grooves of the paw and the holder is 1:3. The new design of the working body will improve the quality of tillage and water-air balance, increase crop yields and reduce fuel consumption.

scholarly journals Automated system as a tool to improve the quality of tillage with forest disk tools

10.12737/3362 ◽  
2014 ◽  
Vol 4 (1) ◽  
pp. 158-162
Author(s):  
Дручинин ◽  
Denis Druchinin ◽  
Миляев ◽  
Andrey Milyaev
Keyword(s):  
Fuel Consumption ◽  
Operating Conditions ◽  
Dynamic Loads ◽  
Automated System ◽  
Depth Of Processing ◽  
Advantages And Disadvantages ◽  
Working Bodies

The advantages and disadvantages of disk tillage in severe operating conditions of forestry are examined. Various methods proposed by scientists to eliminate the problems of weak deepens capacity of working bodies of tillage equipment of this type and their fragile progress at a given depth of processing are described. These proposed solutions make heavier disc tools, which leads to an increase in dynamic loads on the working bodies and to increased fuel consumption of mounted tractor. Developed special devices complicate the design of disk tillage equipment and their production.

Workload Perception of Air Traffic Control Officers and Pilots During Continuous Descent Operations Approach Procedures

2019 ◽  
Vol 9 (1) ◽  
pp. 2-11
Author(s):  
Marina Efthymiou ◽  
Frank Fichert ◽  
Olaf Lantzsch
Keyword(s):  
Fuel Consumption ◽  
Traffic Control ◽  
Air Traffic Control ◽  
Negative Impact ◽  
Air Traffic ◽  
Reduce Fuel Consumption ◽  
Total Load ◽  
Open Path

Abstract. The paper examines the workload perceived by air traffic control officers (ATCOs) and pilots during continuous descent operations (CDOs), applying closed- and open-path procedures. CDOs reduce fuel consumption and noise emissions. Therefore, they are supported by airports as well as airlines. However, their use often depends on pilots asking for CDOs and controllers giving approval and directions. An adapted NASA Total Load Index (TLX) was used to measure the workload perception of ATCOs and pilots when applying CDOs at selected European airports. The main finding is that ATCOs’ workload increased when giving both closed- and open-path CDOs, which may have a negative impact on their willingness to apply CDOs. The main problem reported by pilots was insufficient distance-to-go information provided by ATCOs. The workload change is important when considering the use of CDOs.

Productivity and quality of soybean seeds with different fertilization on podzolized chernozem

2020 ◽  
Vol 1 (97) ◽  
pp. 136-144
Author(s):  
H.M. Hospodarenko ◽  
◽  
I.V. Prokopchuk ◽  
K. P. Leonova ◽  
V.P. Boyko
Keyword(s):  
Crop Rotation ◽  
Crop Yields ◽  
Spring Barley ◽  
Mineral Fertilizer ◽  
Nitrogen Fertilizers ◽  
Mineral Fertilizers ◽  
Forest Steppe ◽  
Soybean Seeds ◽  
Different Doses

The productivity of agricultural crops is the most variable and integral indicator of their vital activity, which accumulates their genetic potential, soil fertility, weather conditions and components of agricultural technology. Soybean under optimal growing conditions (the reaction of the soil is close to neutral, sufficient phosphorus and potassium nutrition, the use of nitraginization) assimilates from the air about 70 % of the total nitrogen requirement. Therefore, it is believed that it is enough to apply only a starting dose of nitrogen fertilizers (20–40 kg/ha a. s.), to get a high yield with good indicators of grain quality. The results of studies of the influence of long-term (8 years) application of different doses and ratios of fertilizers in field crop rotation on podzolized chernozem in the conditions of the Right -Bank Forest-Steppe of Ukraine on the yield and quality of soybean seeds preceded by spring barley were presented. It was found that crop yields could be increased by 18–77 % owing to different doses, ratios and types of fertilizers. The highest indicators of seed yields for three years of the research (3,02 t/ha) were obtained under the application of mineral fertilizers at a dose of N110P60K80 per 1 ha of crop rotation area, including under soybean – N60P60K60. Exclusion of the nitrogen component from the complete fertilizer (N60P60K60) reduced its yield by 26 %, phosphorus – by 17, and potassium by 11 %. There was no significant decrease in soybean yield in the variant of the experiment with a decrease in the proportion of potassium in the composition of complete mineral fertilizer (N60P60K30) for three years of study. The largest mass of 1000 soybean seeds was formed at doses of N60К60 fertilizers, and their protein content — under the application of complete mineral fertilizer in doses of N60P60K60 and N60P60K30.

Reuse of Sludge from Pulp and Paper Industry Pilot and Full Scale Applications

1993 ◽  
Vol 28 (2) ◽  
pp. 17-26 ◽  
Author(s):  
V. Eroǧlu ◽  
A. M. Saatçi
Keyword(s):  
Economic Analysis ◽  
Paper Industry ◽  
Pulp And Paper Industry ◽  
Pulp And Paper ◽  
Full Scale ◽  
Primary Sludge ◽  
Recent Advances ◽  
Made In

Recent advances made in the reuse of pulp and paper industry sludges in hardboard production are explained. Data obtained from pilot and full-scale plants using primary sludge of a pulp and paper industry as an additive in the production of hardboard is presented. An economic analysis of the reuse of pulp and paper primary sludge in hardboard manufacturing is given. The quality of the hardboard produced is tested and compared with the qualities of the hardboard produced by the same plant before the addition of primary sludge. The hardboard with primary sludge additive has been used in Turkey for about a year in the manufacturing of office and home furniture. The results are very satisfactory when the primary sludge is used at 1/4 ratio.

scholarly journals Determination of Environmental Factors for the Implementation of the Exploitability Index in Industrial Aggregate Mining Using Multi-Criteria Analysis

2021 ◽  
Vol 10 (4) ◽  
pp. 196
Author(s):  
Julio Manuel de Luis-Ruiz ◽  
Benito Ramiro Salas-Menocal ◽  
Gema Fernández-Maroto ◽  
Rubén Pérez-Álvarez ◽  
Raúl Pereda-García
Keyword(s):  
Environmental Factors ◽  
Environmental Factor ◽  
Human Life ◽  
Accurate Estimation ◽  
Analytic Hierarchy ◽  
Main Components ◽  
Hierarchy Process ◽  
Made In

The quality of human life is linked to the exploitation of mining resources. The Exploitability Index (EI) assesses the actual possibilities to enable a mine according to several factors. The environment is one of the most constraining ones, but its analysis is made in a shallow way. This research is focused on its determination, according to a new preliminary methodology that sets the main components of the environmental impact related to the development of an exploitation of industrial minerals and its weighting according to the Analytic Hierarchy Process (AHP). It is applied to the case of the ophitic outcrops in Cantabria (Spain). Twelve components are proposed and weighted with the AHP and an algorithm that allows for assigning a normalized value for the environmental factor to each deposit. Geographic Information Systems (GISs) are applied, allowing us to map a large number of components of the environmental factors. This provides a much more accurate estimation of the environmental factor, with respect to reality, and improves the traditional methodology in a substantial way. It can be established as a methodology for mining spaces planning, but it is suitable for other contexts, and it raises developing the environmental analysis before selecting the outcrop to be exploited.

scholarly journals Results of Laboratory Studies of the Automated Sorting System for Root and Onion Crops

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1257
Author(s):  
Alexey Dorokhov ◽  
Alexander Aksenov ◽  
Alexey Sibirev ◽  
Nikolay Sazonov ◽  
Maxim Mosyakov ◽  
...  
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Technological Parameters ◽  
Post Harvest ◽  
Manual Sorting ◽  
Sorting System ◽  
Working Bodies ◽  
Automatic Removal

The roller and sieve machines most commonly used in Russia for the post-harvest processing of root and tuber crops and onions have a number of disadvantages, the main one being a decrease in the quality of sorting due to the contamination of working bodies, which increases the quantity of losses during sorting and storage. To obtain high-quality competitive production, it is necessary to combine a number of technological operations during the sorting process, such as dividing the material into classes and fractions by quality and size, as well as identifying and removing damaged products. In order to improve the quality of sorting of root tubers and onions by size, it is necessary to ensure the development of an automatic control system for operating and technological parameters, the use of which will eliminate manual sorting on bulkhead tables in post-harvest processing. To fulfill these conditions, the developed automatic control system must have the ability to identify the material on the sorting surface, taking into account external damage and ensuring the automatic removal of impurities. In this study, the highest sorting accuracy of tubers (of more than 91%) was achieved with a forward speed of 1.2 m/s for the conveyor of the sorting table, with damage to 2.2% of the tubers, which meets the agrotechnical requirements for post-harvest processing. This feature distinguishes the developed device from similar ones.

scholarly journals Downregulation of exosomal let-7d and miR-16 in idiopathic pulmonary fibrosis

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Donato Lacedonia ◽  
Giulia Scioscia ◽  
Piera Soccio ◽  
Massimo Conese ◽  
Lucia Catucci ◽  
...  
Keyword(s):  
Idiopathic Pulmonary Fibrosis ◽  
Pulmonary Fibrosis ◽  
Therapy Response ◽  
Down Regulation ◽  
Cross Sectional ◽  
Exosomal Mirnas ◽  
Different Types ◽  
Sectional Analysis ◽  
Made In

Abstract Background Idiopathic Pulmonary Fibrosis (IPF) is a degenerative interstitial lung disease with both a poor prognosis and quality of life once the diagnosis is made. In the last decade many features of the disease have been investigated to better understand the pathological steps that lead to the onset of the disease and, moreover, different types of biomarkers have been tested to find valid diagnostic, prognostic and therapy response predictive ones. In the complexity of IPF, microRNA (miRNAs) biomarker investigation seems to be promising. Methods We analysed the expression of five exosomal miRNAs supposed to have a role in the pathogenesis of the disease from serum of a group of IPF patients (n = 61) and we compared it with the expression of the same miRNAs in a group of healthy controls (n = 15). Results In the current study what emerged is let-7d down-regulation and, unexpectedly, miR-16 significant down-regulation. Moreover, through a cross-sectional analysis, a clustering of the expression of miR-16, miR-21 and miR-26a was found. Conclusions These findings could help the individuation of previously unknown key players in the pathophysiology of IPF and, most interestingly, more specific targets for the development of effective medications.

Arthroscopic International Cartilage Repair Society Classification System Has Only Moderate Reliability in a Porcine Cartilage Repair Model

2021 ◽  
pp. 036354652199800
Author(s):  
Jani Puhakka ◽  
Teemu Paatela ◽  
Eve Salonius ◽  
Virpi Muhonen ◽  
Anna Meller ◽  
...  
Keyword(s):  
Cartilage Repair ◽  
Scoring System ◽  
Femoral Condyle ◽  
Intraclass Correlation ◽  
Type Iii Collagen ◽  
Intrarater Reliability ◽  
Scoring Method ◽  
International Cartilage Repair Society ◽  
Made In

Background: The International Cartilage Repair Society (ICRS) score was designed for arthroscopic use to evaluate the quality of cartilage repair. Purpose: To evaluate the reliability of the ICRS scoring system using an animal cartilage repair model. Study Design: Controlled laboratory study. Methods: A chondral defect with an area of 1.5 cm2 was made in the medial femoral condyle of 18 domestic pigs. Five weeks later, 9 pigs were treated using a novel recombinant human type III collagen/polylactide scaffold, and 9 were left to heal spontaneously. After 4 months, the pigs were sacrificed, then 3 arthroscopic surgeons evaluated the medial femoral condyles via video-recorded simulated arthroscopy using the ICRS scoring system. The surgeons repeated the evaluation twice within a 9-month period using their recorded arthroscopy. Results: The porcine cartilage repair model produced cartilage repair tissue of poor to good quality. The mean ICRS total scores for all observations were 6.6 (SD, 2.6) in arthroscopy, 5.9 (SD, 2.7) in the first reevaluation, and 6.2 (SD, 2.8) in the second reevaluation. The interrater reliability with the intraclass correlation coefficient (ICC) for the ICRS total scores (ICC, 0.46-0.60) and for each individual subscore (ICC, 0.26-0.71) showed poor to moderate reliability. The intrarater reliability with the ICC also showed poor to moderate reliability for ICRS total scores (ICC, 0.52-0.59) and for each individual subscore (ICC, 0.29-0.58). A modified Bland-Altman plot for the initial arthroscopy and for the 2 reevaluations showed an evident disagreement among the observers. Conclusion: In an animal cartilage repair model, the ICRS scoring system seems to have poor to moderate reliability. Clinical Relevance: Arthroscopic assessment of cartilage repair using the ICRS scoring method has limited reliability. We need more objective methods with acceptable reliability to evaluate cartilage repair outcomes.

scholarly journals Learning As It Happens: A Decade of Analyzing and Shaping a Large-Scale Online Learning System

2018 ◽  
Vol 5 (2) ◽  
Author(s):  
Matthieu J. S. Brinkhuis ◽  
Alexander O. Savi ◽  
Abe D. Hofman ◽  
Frederik Coomans ◽  
Han L. J. Van der Maas ◽  
...  
Keyword(s):  
Online Learning ◽  
Large Scale ◽  
Response Times ◽  
Learning System ◽  
Learning Gains ◽  
Online Experimentation ◽  
Quality Of Fit ◽  
Item Reliability ◽  
Made In

With the advent of computers in education, and the ample availability of online learning and practice environments, enormous amounts of data on learning become available. The purpose of this paper is to present a decade of experience with analyzing and improving an online practice environment for math, which has thus far recorded over a billion responses. We present the methods we use to both steer and analyze this system in real-time, using scoring rules on accuracy and response times, a tailored rating system to provide both learners and items with current ability and difficulty ratings, and an adaptive engine that matches learners to items. Moreover, we explore the quality of fit by means of prediction accuracy and parallel item reliability. Limitations and pitfalls are discussed by diagnosing sources of misfit, like violations of unidimensionality and unforeseen dynamics. Finally, directions for development are discussed, including embedded learning analytics and a focus on online experimentation to evaluate both the system itself and the users’ learning gains. Though many challenges remain open, we believe that large steps have been made in providing methods to efficiently manage and research educational big data from a massive online learning system.

Sign in / Sign up

Export Citation Format

Share Document