scholarly journals Thiophene extraction in PEG - hexan - water based systems

2022 ◽  
Vol 1212 (1) ◽  
pp. 012025
Author(s):  
V O Solov‘ev’ ◽  
S V Solov’eva ◽  
N A Milevsky
Keyword(s):  
Polyethylene Glycol ◽  
Sodium Chloride ◽  
Organic Phase ◽  
Sodium Nitrate ◽  
Iron Chloride ◽  
Water Based ◽  
Polyethylene Glycol 1500 ◽  
Peg 8000

Abstract The effect of individual and multicomponent additives of sodium chloride, iron chloride, sodium nitrate and 1-methyl-2-pyrrolidone on the interfacial distribution of thiophene in the systems polyethylene glycol 1500 (PEG-1500) - hexane - water and polyethylene glycol 8000 (PEG-8000) - hexane - water has been studied in this investigation. It was found that in most cases, the introduction of a small amount of individual and joint additives increases the extraction of thiophene from the organic phase to the aqueous.

Development, Evaluation and Optimization of Osmotic Controlled Tablets of Aceclofenac for Rheumatoid Arthritis Management

2019 ◽  
Vol 9 (1) ◽  
pp. 29-36
Author(s):  
Bijaya Ghosh ◽  
Niraj Mishra ◽  
Preeta Bose ◽  
Moumita D. Kirtania
Keyword(s):  
Rheumatoid Arthritis ◽  
Polyethylene Glycol ◽  
Sodium Chloride ◽  
Cellulose Acetate ◽  
Hydroxypropyl Methylcellulose ◽  
Release Profile ◽  
Polyethylene Glycol 400 ◽  
Permeable Membrane ◽  
Cumulative Release ◽  
The Core

Objective: Rheumatoid arthritis is a dreaded disease, characterized by pain, inflammation and stiffness of joints, leading to severe immobility problems. The disease shows circadian variation and usually gets aggravated in early morning hours. Aceclofenac, a BCS Class II compound is routinely used in the treatment of pain and inflammation associated with rheumatoid arthritis. The objective of this study was to develop an osmotic delivery system of Aceclofenac that after administration at bedtime would deliver the drug in the morning hours. </P><P> Methods: A series of osmotically controlled systems of aceclofenac was developed by using lactose, sodium chloride and hydroxypropyl methylcellulose K100M as osmogens. Cellulose acetate (2% w/v in acetone) with varying concentrations of polyethylene glycol-400 was used as the coating polymer to create semi permeable membrane and dissolution was carried out in 290 mOsm phosphate buffer. Formulation optimization was done from four considerations: cumulative release at the end of 6 hours (lag time), cumulative release at the end of 7 hours (burst time), steady state release rate and completeness of drug release. </P><P> Results: A formulation having swelling polymer hydroxypropyl methylcellulose in the core and lactose and sodium chloride as osmogens, polyethylene glycol-400 (16.39 %) as pore former, with a coating weight of 5% was a close fit to the target release profile and was chosen as the optimum formulation. Conclusion: Aceclofenac tablets containing lactose, HPMC and sodium chloride in the core, given a coating of cellulose acetate and PEG-400 (5% wt gain), generated a release profile for optimum management of rheumatoid arthritic pain.

Europium and cerium extraction by the nitrobenzene solution of dicarbolide in the presence of polyethylene glycols

1986 ◽  
Vol 51 (3) ◽  
pp. 498-515 ◽  
Author(s):  
Emanuel Makrlík ◽  
Petr Vaňura
Keyword(s):  
Molecular Weight ◽  
Polyethylene Glycol ◽  
Organic Phase ◽  
Perchloric Acid ◽  
Equilibrium Constants ◽  
Polyethylene Glycols ◽  
Individual Species ◽  
Nitrobenzene Solution ◽  
Separation Factors ◽  
Equilibrium Data

Extraction of Eu3+ and Ce3+ microamounts from 0.1-0.4M perchloric acid by the nitrobenzene solution of dicarbolide H+[Co(C2B9H11)2]- in the presence of polyethylene glycols (Mr = 200, 300, 400) has been studied. The equilibrium data and the typical maxima on the dependence of the metal distribution ratio on the total analytical concentration of polyethylene glycol in the system can be explained assuming that the species ML3+org, ML3+2org, ML3+3org, MLH2+-1org, and HL+org (where M3+ = Eu3+, Ce3+; L = polyethylene glycol) are extracted into the organic phase. The values of extraction and equilibrium constants in the organic phase were determined and the effect of the polyethylene glycol molecular weight on the equilibrium constants and on the abundances of individual species in the organic phase is discussed. It has been found that the addition of polyethylene glycol to the acid - nitrobezene - dicarbolide system increases the values of the separation factors αCe/Eu.

scholarly journals Effects of Matric and Osmotic Priming Treatments on Broccoli Seed Germination

1996 ◽  
Vol 121 (3) ◽  
pp. 423-429 ◽  
Author(s):  
Lewis W. Jett ◽  
Gregory E. Welbaum ◽  
Ronald D. Morse
Keyword(s):  
Polyethylene Glycol ◽  
Seed Germination ◽  
Root Growth ◽  
Growth Rates ◽  
Germination Rate ◽  
Membrane Integrity ◽  
Seed Vigor ◽  
Radicle Emergence ◽  
The Mean ◽  
Peg 8000

Priming, a controlled-hydration treatment followed by redrying, improves the germination and emergence of seeds from many species. We compared osmotic and matric priming to determine which was the most effective treatment for improving broccoli seed germination and to gain a greater understanding of how seed vigor is enhanced by priming. Broccoli (Brassica oleracea L. var. italica) seeds were osmotically primed in polyethylene glycol (PEG 8000) at -1.1 MPa or matrically primed in a ratio of 1.0 g seed:0.8 g synthetic calcium silicate (Micro-Cel E):1.8 ml water at -1.2 MPa. In the laboratory, germination rates and root lengths were recorded from 5 to 42C and 10 to 35C, respectively. Broccoli seeds germinated poorly at >35C. Root growth after germination was more sensitive to temperatures >30C and <15C than radicle emergence. Matric and osmotic priming increased germination rate in the laboratory, greenhouse, and field. However, matric priming had a greater effect on germination and root growth rates from 15 to 30C. Neither priming treatment affected minimum or maximum germination or root growth temperatures. Both priming treatments decreased the mean thermal time for germination by >35%. The greater germination performance of matrically primed seeds was most likely the result of increased oxygen availability during priming, increased seed Ca content, or improved membrane integrity.

Dispersion of Barium Ferrite Particles for Slip Casting in Magnetic Field

2006 ◽  
Vol 317-318 ◽  
pp. 143-146 ◽  
Author(s):  
Jing Long Li ◽  
Saburo Sano ◽  
Akihiro Tsuzuki ◽  
Akihiro Gotou ◽  
Yasuo Shibasaki ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Polyethylene Glycol ◽  
Zeta Potential ◽  
Barium Ferrite ◽  
Slip Casting ◽  
Steric Repulsion ◽  
Ph Titration ◽  
Zeta Potentials ◽  
Water Based ◽  
Slip Cast

Water-based slurries containing barium ferrite particles have been prepared and slip cast in magnetic field. This paper presents the characteristics of the suspensions in terms of Iso-Electric Points (IEP) and zeta potential that were evaluated through pH titration and polymer adsorption. Both enlarging the specific surface area of particles by planetary milling and adjusting the pH to low value apparently increase the zeta potentials. Stable slurry was obtained by adding polyethylene glycol (PEG) into the suspension at pH = 2 ~ 3.5. The steric repulsion plays key role in dispersion and PEG films served as insulative layers and mechanically kept particles from contact each other. The barium ferrite particles formed many stacks of plates during slip casting, which either aligned randomly without magnetic field applied or regularly aligned to form textured structure when magnetic field was applied.

Sign in / Sign up

Export Citation Format

Share Document