scholarly journals Enhanced Relative Electron Transport Rate Contributes to Increased Photosynthetic Capacity in Autotetraploid Pak Choi

2020 ◽  
Vol 61 (4) ◽  
pp. 761-774 ◽  
Author(s):  
Changwei Zhang ◽  
Huiyu Wang ◽  
Yuanyuan Xu ◽  
Shuning Zhang ◽  
Jianjun Wang ◽  
...  

Abstract Autopolyploids often show growth advantages over their diploid progenitors because of their increased photosynthetic activity; however, the underlying molecular basis of such mechanism remains elusive. In this study, we aimed to characterize autotetraploid pak choi (Brassica rapa ssp. chinensis) at the physiological, cellular and molecular levels. Autotetraploid pak choi has thicker leaves than its diploid counterparts, with relatively larger intercellular spaces and cell size and greater grana thylakoid height. Photosynthetic data showed that the relative electron transport rate (rETR) was markedly higher in autotetraploid than in diploid pak choi. Transcriptomic data revealed that the expressions of genes involved in ‘photosynthesis’ biological process and ‘thylakoids’ cellular component were mainly regulated in autotetraploids. Overall, our findings suggested that the increased rETR in the thylakoids contributed to the increased photosynthetic capacity of autotetraploid leaves. Furthermore, we found that the enhanced rETR is associated with increased BrPetC expression, which is likely altered by histone modification. The ectopic expression of BrPetC in Arabidopsis thaliana led to increased rETR and biomass, which were decreased in BrPetC-silenced pak choi. Autotetraploid pak choi also shows altered hormone levels, which was likely responsible for the increased drought resistance and the impaired powdery mildew resistance of this lineage. Our findings further our understanding on how autotetraploidy provides growth advantages to plants.

2009 ◽  
Vol 21 (3) ◽  
pp. 167-174 ◽  
Author(s):  
Cleber Cunha Figueredo ◽  
Alessandra Giani ◽  
José Pires Lemos Filho

During photosynthesis, absorbed energy that is not used in photochemical reactions dissipates as fluorescence. Fluorescence provides important information on the physiological conditions of the studied organisms and its measurement is widely used by plant physiologists and can be valuable in phytoplankton studies. We describe a method adapting a plant fluorometric equipment to measure the photosynthetic capacity of microalgae. Unialgal cultures of three planktonic chlorophytes were exposed to 3(3,4-dichlorophenyl)-1,1-dimethylurea (DCMU), an inhibitor of photosystem II, at concentrations of 0.1, 1.0 and 10.0 µmol.L-1. Estimates were made of photosynthetic parameters, including operational and potential photosystem II quantum yield and electron transport rate between photosystems, using algal cells concentrated on glass-fiber filters. The technique allowed reliable measurements of fluorescence, and detection of distinct levels of inhibition. Physiological or morphological characteristics of the selected species might provide an explanation for the observed results: differences on the surface/volume ratio of the cells and colony morphology, for example, were associated with contrasting resistance to the toxicant. To characterize inhibition on phytoplanktonic photosynthesis, we suggest operational quantum yield and electron transport rate as best parameters, once they were more sensitive to the DCMU toxicity.


2020 ◽  
Vol 12 (11) ◽  
pp. 1718
Author(s):  
Oded Liran ◽  
Ofer M. Shir ◽  
Shai Levy ◽  
Ariel Grunfeld ◽  
Yuval Shelly

Photosynthesis performance can be assessed quantitatively with light response curves. These curves record the Electron Transport Rate (ETR) as a function of light intensity. Then, statistical fit on these curves parameterize light use efficiency, maximum photosynthetic activity and the reaction of the apparatus to stress. While this technique is performed with portable fluorometers in field conditions, it is difficult to scale it to the canopy level. The Fraunhofer line discrimination technique, which detects fluorescence signals emitted during photosynthesis, is a promising method to assess photosynthetic performance of canopies. In this study, we define a remote sensing ETR index based on a combination of three parameters: sun-induced fluorescence, normalized differential vegetation index and light intensity. Two representatives of C3 and C4 photosynthesis, L. sativa and Z. mays, experienced a fertilization concentrations gradient. ETR increased with light intensity in both crops. In L. sativa, ETR assumed a linear relationship between the photosynthetic activity and light intensity, with a correlation of R2 = 0.99 to the portable fluorometer. Additional parametrization revealed a resilience of its reaction centers to photoinhibition in maximum light intensities. When Z. mays experienced open field conditions, ETR correlated with the plant’s status. While the results of this study are promising, the index still requires validation in terms of temporal track and spatial variability.


2021 ◽  
Author(s):  
Susanne von Caemmerer

AbstractC4 plants play a key role in world agriculture. For example, C4 crops such as maize and sorghum are major contributors to both first and third world food production and the C4 grasses sugarcane; miscanthus and switchgrass are major plant sources of bioenergy. In the challenge to manipulate and enhance C4 photosynthesis, steady state models of leaf photosynthesis provide and important tool for gas exchange analysis and thought experiments that can explore photosynthetic pathway changes. Here the C4 photosynthetic model by von Caemmerer and Furbank (1999) has been updated with new kinetic parameterisation and temperature dependencies added. The parameterisation was derived from experiments on the C4 monocot, Setaria viridis, which for the first time provides a cohesive parametrisation. Mesophyll conductance and its temperature dependence have also been included, as this is an important step in the quantitative correlation between the initial slope of the CO2 response curve of CO2 assimilation and in vitro PEP carboxylase activity. Furthermore, the equations for chloroplast electron transport have been updated to include cyclic electron transport flow and equations have been added to calculate electron transport rate from measured CO2 assimilation rates.HighlightThe C4 photosynthesis model by von Caemmerer and Furbank (1999) has been updated. It now includes temperature dependencies and equations to calculate electron transport rate from measured CO2 assimilation rates.


Author(s):  
Roque de Carvalho Dias ◽  
Leandro Bianchi ◽  
Vitor Muller Anunciato ◽  
Leandro Tropaldi ◽  
Paulo Vinicius da Silva ◽  
...  

Abstract Mefenpyr-diethyl is a foliar-acting safener of the pyrazoline chemical group, and after its absorption, the metabolization and detoxification of herbicides occur in treated plants. Studies have demonstrated the protective effect of this safener for the herbicide fenoxaprop-P-ethyl in grass. Thus, this work aimed to evaluate whether a tank mixture of mefenpyr-diethyl has a protective response to haloxyfop-methyl in non-perennial bahiagrass. The experiment had a completely randomized design and was carried out in a greenhouse, using five replications with a 10x2 factorial scheme and ten doses of haloxyfop-methyl (0.00, 0.24, 0.49, 0.97, 1.95, 3.90, 7.79, 15.59, 31.28, and 62.35 g a.i. ha-1) in the presence or absence of a tank mixture of mefenpyr-diethyl (50 g a.i. ha-1). Phytotoxicity and electron transport rate (ETR) were evaluated at 7, 14, 21, and 28 days after application (DAA), in addition to plant height and dry biomass at 28 DAA. In general, phytotoxicity increased due to the higher levels of the herbicide haloxyfop-methyl. The application of mefenpyr-diethyl, in turn, provided lower levels of phytotoxicity, as well as lower reductions in ETR, height, and dry biomass when compared to untreated plants. These results show the safener action of a tank mixture of mefenpyr-diethyl on low doses of haloxyfop-methyl in non-perennial bahiagrass.


Plants ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 960
Author(s):  
Kuan-Hung Lin ◽  
Feng-Chi Shih ◽  
Meng-Yuan Huang ◽  
Jen-Hsien Weng

The objective of this work was to study physiological characteristics and photosynthetic apparatus in differentially pigmented leaves of three Chinese kale cultivars. Chlorophyll (Chl) fluorescence and photochemical reflectance index (PRI) measurements in green, yellow-green, and dark-green cultivars in response to varying light intensities. As light intensity increased from 200 to 2000 photosynthetic photon flux density (PPFD), fraction of light absorbed in photosystem (PS) II and PRI values in all plants were strongly lowered, but fraction of light absorbed in PSII dissipated via thermal energy dissipation and non-photochemical quenching (NPQ) values in all plants wereremarkably elevated.When plants were exposed to 200 PPFD, the values of fraction of light absorbed in PSII, utilized in photosynthetic electron transport(p), andfraction of light absorbed excitation energy in PSII dissipated via thermal energy dissipation (D), remained stable regardless of the changes in levels of Chla + b. Under 800 and 1200 PPFD, the values of p and electron transport rate (ETR) decreased, but D and NPQ increased as Chla + bcontent decreased, suggesting that decrease inChla + bcontent led to lower PSII efficiency and it became necessary to increase dissipate excess energy. On the contrary, in 2000 PPFD, leaves with lower Chla + bcontent had relatively higher p and electron transport rate (ETR) values and lower D level, as well as tended to increase more in NPQ but decrease more in PRI values. The consistent relations between PRI and NPQ suggest that NPQ is mainly consisted ofthe xanthophyll cycle-dependentenergy quenching.Yellow-green cultivar showed lower Chla + bcontent but high carotenoids/Chla + b ratio and had high light protection ability under high PPFD. The precise management of photosynthetic parameters in response to light intensity can maximize the growth and development of Chinese kale plants.


2019 ◽  
Vol 11 (3) ◽  
pp. 329 ◽  
Author(s):  
Gustavo Lobos ◽  
Alejandro Escobar-Opazo ◽  
Félix Estrada ◽  
Sebastián Romero-Bravo ◽  
Miguel Garriga ◽  
...  

To overcome the environmental changes occurring now and predicted for the future, it is essential that fruit breeders develop cultivars with better physiological performance. During the last few decades, high-throughput plant phenotyping and phenomics have been developed primarily in cereal breeding programs. In this study, plant reflectance, at the level of the leaf, was used to assess several physiological traits in five Vaccinium spp. cultivars growing under four controlled conditions (no-stress, water deficit, heat stress, and combined stress). Two modeling methodologies [Multiple Linear Regression (MLR) and Partial Least Squares (PLS)] with or without (W/O) prior wavelength selection (multicollinearity, genetic algorithms, or in combination) were considered. PLS generated better estimates than MLR, although prior wavelength selection improved MLR predictions. When data from the environments were combined, PLS W/O gave the best assessment for most of the traits, while in individual environments, the results varied according to the trait and methodology considered. The highest validation predictions were obtained for chlorophyll a/b (R2Val ≤ 0.87), maximum electron transport rate (R2Val ≤ 0.60), and the irradiance at which the electron transport rate is saturated (R2Val ≤ 0.59). The results of this study, the first to model modulated chlorophyll fluorescence by reflectance, confirming the potential for implementing this tool in blueberry breeding programs, at least for the estimation of a number of important physiological traits. Additionally, the differential effects of the environment on the spectral signature of each cultivar shows this tool could be directly used to assess their tolerance to specific environments.


Sign in / Sign up

Export Citation Format

Share Document