scholarly journals Fetal programming effects of early weaning on subsequent parity calf performance

2021 ◽  
Vol 5 (3) ◽  
Author(s):  
Jack L Oattes ◽  
Taoqi Shao ◽  
Parker A Henley ◽  
Daniel W Shike
Keyword(s):  
Growth Performance ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Postnatal Growth ◽  
Production Cycle ◽  
Gestation Length ◽  
Early Weaning ◽  
Fat Percentage ◽  
Marbling Score ◽  
Feedlot Performance

Abstract Mature Simmental × Angus cows [n = 147; body weight (BW) = 590 ± 72 kg] were used to evaluate the effects of early weaning on subsequent parity calf growth performance and carcass characteristics. Cows were assigned to one of two treatments based on their previous calf’s weaning age: early wean (EW) or conventional wean (CW). Dams assigned to the EW treatment had calves previously weaned at 88 ± 6 d of age, whereas dams assigned to the CW treatment had calves previously weaned at 185 ± 6 d of age. Cow BW and body condition scores (BCS) were monitored during the experiment. All cows were managed as a common group from the onset of the experiment at breeding until final pregnancy check of their next production cycle 462 d later. All calves in the experiment were managed as one group and weaned at a single time point, then feedlot performance and carcass characteristics were evaluated. Initial cow BW was different (P < 0.05), so it was included as a covariate for cow BW analysis. There was a treatment × date interaction (P < 0.01) for cow BW and cow BCS. Cow BW was consistently greater for the EW treatment from day 39 to the end of the experiment (P < 0.01). Cow BCS were not different at the onset of the experiment (P = 0.20), although after breeding and throughout lactation, BCS diverged between treatments and the EW treatment consistently had greater (P < 0.01) BCS than the CW treatment throughout the entire subsequent lactation. Gestation length was not different (P = 0.21) between treatments, yet calf birth BW was greater (P = 0.05) for the EW treatment. Neither artificially inseminated pregnancy percentage nor overall pregnancy percentage was different between treatments (P ≥ 0.61). Despite the greater birth BW for the EW treatment and no difference (P = 0.25) in milk production, weaning BW was not different (P = 0.50) between treatments. Feedlot performance measures were not different (P ≥ 0.13) between treatments, including feedlot arrival weight, final BW, average daily gain, dry matter intake, and gain to feed. Final carcass characteristics were not different (P ≥ 0.33) between treatments, including dressing percentage, hot carcass weight, LM area, 12th rib fat thickness, kidney, pelvic, heart fat percentage, USDA yield grade, and marbling score. Thus, early weaning resulted in improved BW and BCS of cows as well as increased birth BW of subsequent calf, although that did not transpire into differences in postnatal growth performance or carcass traits.

scholarly journals The influence of shade allocation or total shade plus overhead fan on growth performance, efficiency of dietary energy utilization, and carcass characteristics of feedlot cattle under tropical ambient conditions

2020 ◽  
Vol 33 (6) ◽  
pp. 1034-1041
Author(s):  
Beatriz I. Castro-Pérez ◽  
Alfredo Estrada-Angulo ◽  
Francisco G. Ríos-Rincón ◽  
Víctor H. Núñez-Benítez ◽  
Carlos R. Rivera-Méndez ◽  
...  
Keyword(s):  
Growth Performance ◽  
Energy Requirement ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Feedlot Cattle ◽  
Energy Utilization ◽  
Maximum Temperature ◽  
Dietary Energy ◽  
Marbling Score ◽  
Quadratic Effect

Objective: The objective of this experiment was to evaluate the effect of shade allocation and shade plus fan on growth performance, dietary energy utilization and carcass characteristics of feedlot cattle under tropical ambient conditionsMethods: Two trials were conducted, involving a total of 1,560 young bulls (289±22 kg BW) assigned to 24 pens (65 bulls/pen and 6 pens/treatment). Pens were 585 m<sup>2</sup> with 15 m fence line feed bunks. Shade treatments (m<sup>2</sup> shade/animal) were: i) limited shade (LS) to 1.2 m<sup>2</sup>shade/animal (LS<sub>1.2</sub>); ii) limited shade to 2.4 m<sup>2</sup> shade/animal (LS<sub>2.4</sub>); iii) total shade (TS) which correspond to 9 m<sup>2</sup>/animal, and iv) total shade equipped with fans (TS+F). Trials lasted 158 and 183 days. In both studies, the average weekly maximum temperature exceeded 34°C.Results: Increasing shade allocation tended (p = 0.08) to linearly increases average daily gain (ADG), and dry matter intake (DMI, quadratic effect, p = 0.03). This effect was most apparent between LS<sub>1.2</sub> and LS<sub>2.4</sub>. Shade allocation, per se, did not affect gain efficiency or estimated dietary net energy (NE). Compared with TS, TS+F increased (p<0.05) ADG, gain efficiency, and tended (p = 0.06) to increase dietary NE. There was a quadratic effect of shade on <i>longissimus</i> area and marbling score, with values being lower (p<0.01) for LS<sub>2.4</sub> than for LS<sub>1.2</sub> or TS. Likewise, marbling score was lower for TS+F than for TS. Percentage kidney, pelvic, and heart (KPH) linearly decreased with increasing shade. In contrast, KPH was greater for TS than for TS+F.Conclusion: Providing more than 2.4 m<sup>2</sup> shade/animal will not further enhance feedlot performance. The use of fans in combination with shade increases ADG and gain efficiency beyond that of shade, alone. These enhancements were not associated with increased DMI, but rather, to an amelioration of ambient temperature humidity index on maintenance energy requirement.

scholarly journals Effects of a pineapple (Ananas comosus L.) cannery by-product on growth performance and carcass characteristics in finishing Hanwoo steers

2021 ◽  
Vol 34 (2) ◽  
pp. 233-242
Author(s):  
Yongjun Choi ◽  
Sangrak Lee ◽  
Youngjun Na
Keyword(s):  
Body Weight ◽  
Growth Performance ◽  
Body Weight Gain ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Amino Acid Profile ◽  
Ananas Comosus ◽  
Marbling Score ◽  
Negative Effects ◽  
Feeding Group

Objective: The aim of this study was to determine the effect of pineapple cannery by-product (PCB) level on the growth performance and carcass characteristics of finishing Hanwoo steers.Methods: The feeding stage was divided into early and late finishing stages. A total of 60 castrated Hanwoo steers (13.9±0.8 months old, 418.8±36.5 kg initial body weight [BW]) were blocked by initial BW and then randomly allotted into 12 pens (five head/pen). The pens were randomly assigned to control (CONT), low PCB (LPCB), or high PCB (HPCB) treatments. These diets contained 0%, 1.5%, or 3.0% of PCB (on a dry matter [DM] basis; as-fed basis was 0%, 10.6%, or 21.2%), respectively.Results: For the early finishing stage, body weight gain (BWG) and average daily gain (ADG) of the CONT and LPCB feeding groups were greater (p<0.05) than those of the HPCB feeding group. In addition, there were linear and quadratic effects on BWG and ADG with increasing dietary PCB level (p<0.05). The gain to feed (G:F) ratio tends to quadratically decrease with an increasing PCB level in the early finishing stage (p = 0.076). Growth performances of late finishing stage were not affected by PCB level. The marbling score of the LPCB feeding group was similar to that of the CONT feeding group. However, there was a linear decrease (p< 0.05) in marbling score and quality grade among treatments as PCB was increased in the diet. In the <i>longissimus</i> muscle free amino acid profile, histidine composition increased linearly (p<0.05) with an increasing level of PCB.Conclusion: The level of PCB 1.5% DM in diet can be used for finishing steers without any adverse effects on growth and carcass performances. However, there were some negative effects on growth and carcass performance in the HPCB feeding group.

98 What We Think We “know” About Beef X Dairy Crossbred Cattle in the Feedlot

2021 ◽  
Vol 99 (Supplement_3) ◽  
pp. 53-54
Author(s):  
Tara L Felix
Keyword(s):  
United States ◽  
Growth Performance ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
The United States ◽  
Beef Production ◽  
Feedlot Performance ◽  
Early Maturing ◽  
Holstein Calves ◽  
Daily Gain

Abstract To increase profitably, dairy farms across the United States have rapidly adopted breeding a portion of their cows to beef sires, generating crossbred progeny. The resulting progeny have, in some cases, increased the value of the calf to the dairy, due to their perceived potential for improved growth, feed efficiency, and carcass characteristics for beef production. U.S. research is behind our European counterparts in recommending the appropriate beef sires for dairy matings, and U.S. semen trends show Angus sales over many other breeds. However, Kempster et al. (1982) reported that calves sired by British breed bulls were actually at a disadvantage in growth performance compared to even purebred Holstein calves. Finnish researchers agreed, reporting that the resulting crossbreds from Aberdeen Angus and Hereford bulls were extremely variable, making them undesirable for beef production. However, resulting crossbred calves from late maturing breed types (Charolais, Limousine, and Simmental) had better average daily gain and carcass characteristics than their counterparts from early maturing breeds (Huuskonen et al., 2013). A comprehensive review of early crossbred systems similarly suggested that calves sired by Continental breeds, like Charolais, had an advantage in the feedlot and the packing house (Shank, 2003). Going a bit further, another European study examined the used of 3 beef breeds (Belgian Blue, Limousine, and Galacian Blonde) known for heavy muscling, but not common in the United States, for use as crossbreeding sires (Fouz et al., 2012). Holstein cows bred to Belgian Blue sires had the greatest difficulty calving; however, calving difficulties were reduced with increasing dam age (Fouz et al., 2012). Unfortunately, that trial did not go on to evaluate feedlot performance. Thus, there remains a dearth of scientific references for crossbred mating decisions as well as subsequent growth performance and carcass outcomes.

Carcass and meat properties of six genotypes of young bulls finished under feedlot tropical conditions of Mexico

2017 ◽  
Vol 57 (6) ◽  
pp. 1186 ◽  
Author(s):  
O. V. Vazquez-Mendoza ◽  
G. Aranda-Osorio ◽  
M. Huerta-Bravo ◽  
A. E. Kholif ◽  
M. M. Y. Elghandour ◽  
...  
Keyword(s):  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Point Of View ◽  
Marbling Score ◽  
Feedlot Performance ◽  
Brown Swiss ◽  
Holstein Breed ◽  
Tropical Conditions ◽  
Daily Gain ◽  
Score Point

The effect of six genotypes (Zebu = Z, European Brown Swiss = EBS, Holstein = H, Z × EBS, Zebu × American Brown Swiss = ABS, Z × ABS, Z × H) on carcass and meat characteristics of young bullocks finished under feedlot conditions was tested. The Z × ABS bullocks had the highest (P = 0.001) average daily gain. The highest (P = 0.017) final liveweight was observed with Z × ABS > EBS > H genotypes. The ribeye area was larger (P = 0.012) for EBS bullocks. Both H and EBS bullocks had lowest (P = 0.001) physiological maturity; although the H bullocks had higher (P = 0.006) pelvis and heart fat values. The best (P = 0.014) conformation was obtained with the Z × ABS and Z × EBS genotypes. The greatest amount of marbling (P = 0.001) was obtained with the H genotype. In general, the crossbred genotypes showed better feedlot performance and carcass characteristics, and it seems that Holstein breed could have a an advantage from the marbling score point of view.

scholarly journals Effect of oscillating feeding time and corn processing on performance and carcass characteristics of feedlot steers

2020 ◽  
Vol 4 (2) ◽  
pp. 974-979
Author(s):  
Alejandro E Relling ◽  
David Douglas Clevenger ◽  
Francis L Fluharty
Keyword(s):  
Body Weight ◽  
Growth Performance ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Feedlot Cattle ◽  
Feeding Time ◽  
Marbling Score ◽  
Similar Time ◽  
Corn Processing ◽  
Animal Growth

Abstract The objectives of this experiment were to evaluate the effect of oscillating feeding time (OFT) and corn processing (CoP) on performance and carcass characteristics of feedlot cattle. One hundred sixty-five steers (initial body weight [BW] 277.2 ± 27.80 kg) were blocked by initial BW and allotted to 24 pens. Pens within each block were randomly assigned based on a 2 × 2 factorial arrangement of treatments. The two factors were CoP (whole shelled corn vs. ground corn [GC]) and feeding time (FT) (constant FT vs. 2 hours OFT). Animals were fed the same diet, only changing the CoP method depending on the treatment. Feed offered and feed refusals were collected daily. Body weight was collected at starting day of the experiment (d1) and every 28 d until the end of the experiment. At the end of the experiment, animals were harvested in a commercial slaughter facility, and carcass data were collected by a USDA grader. Animal growth performance and carcass characteristics data were analyzed with the PROC Mixed procedure (SAS) using CoP, FT, and their interaction as fixed variables; and treatments × pen within each block and block were considered random variables. There was no CoP by FT interaction differences (P &gt; 0.10) on animal growth performance variables, nor on hot carcass weight, back fat, rib eye area, or the percentage of kidney, pelvic, and heart fat. There was a tendency for an interaction (P = 0.08) for marbling score, where the steers from the GC processing fed on the oscillating time had a lesser marbling score than the other three treatments. Oscillating feeding time improved (P = 0.05) average daily gain; but did not affect (P ≥ 0.11) dry matter intake (DMI), nor carcass characteristics compared with feeding at a similar time every day. There were no effects (P ≥ 0.11) of CoP on growth performance, nor carcass characteristics. In conclusion, a 2-hour oscillation in FT might not decrease steer feedlot performance. This may be due to the high degree of control of DMI with feed bunk management.

298 The Effects of Chromium Propionate Supplementation to Calf-fed Steers in a Commercial Feedyard on Growth Performance, Carcass Characteristics and Health

2021 ◽  
Vol 99 (Supplement_3) ◽  
pp. 165-165
Author(s):  
Sara J Trojan ◽  
Jerilyn Hergenreder ◽  
Landon Canterbury ◽  
Tyler Leonhard ◽  
John M Long
Keyword(s):  
Growth Performance ◽  
Average Daily Gain ◽  
Bos Indicus ◽  
Carcass Characteristics ◽  
Beta Agonist ◽  
Respiratory Morbidity ◽  
Marbling Score ◽  
Chromium Propionate ◽  
Retreatment Rate ◽  
Dietary Treatments

Abstract Crossbred steers [British x Continental x Bos Indicus; n = 1844; initial body weight (BW) = 248 ± 28 kg] were used to evaluate the effects of chromium propionate supplementation to calf-fed steers in a commercial feedyard on growth performance, carcass characteristics and health. Steers were blocked by initial BW; pens were assigned randomly to one of two dietary treatments within block. Treatments, replicated in 15 pens/treatment with 57 to 62 head per pen, included: 1) control, 0 mg supplemental Cr/kg dietary dry matter (DM) (CTL); 2) 0.50 mg supplemental Cr/kg dietary DM (chromium propionate; KemTRACE® Chromium 0.04%, Kemin Industries, Des Moines, IA) (CR). Due to inadvertent oversight, during the final 30 days on feed, CR cattle did not receive trace minerals, vitamins, an ionophore, antibiotic, or ractopamine-hydrochloride. Final BW, average daily gain (ADG) and DM intake did not differ among treatments (P ≥ 0.25). Gain efficiency was greater (P = 0.03) for CTL than CR (0.16 vs. 0.15). Hot carcass weight and dressing percentage were similar among treatments (P ≥ 0.19). Yield grade was higher for CR than CTL (2.44 vs. 2.27; P &lt; 0.01); 12th-ribfat tended to be greater for CR than CTL (P = 0.09), and longissimus area was greater for CTL vs. CR (P &lt; 0.01). Marbling score tended (P = 0.10) to be greater for CR than CTL. Steers fed CR tended (P = 0.07) to have a greater distribution of prime carcasses than CTL (1.9% vs. 0.07%), and percentage choice carcasses was higher for CR than CTL (67.34% vs. 61. 71%, P = 0.01). Respiratory morbidity (12.20%), and retreatment rate did not differ among treatments (P ≥ 0.20). In the absence of a beta-agonist, CR steers had higher quality carcasses, and similar ADG and HCW to CTL.

PSVIII-15 Effect of Endovac-Beef vaccination on performance, dietary energetics, and carcass characteristics of growing-finishing calf-fed Holstein steers

2021 ◽  
Vol 99 (Supplement_3) ◽  
pp. 429-430
Author(s):  
Brooke C Latack ◽  
Pedro H Carvalho ◽  
Richard A Zinn
Keyword(s):  
Growth Performance ◽  
Animal Health ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Live Weight ◽  
Net Energy ◽  
Feeding Period ◽  
Marbling Score ◽  
Muscle Area ◽  
Eye Infection

Abstract Objectives were to evaluate the influence of ENDOVAC-Beef® (Endovac Animal Health, Columbia, MO) vaccination on calf-fed Holstein steer growth performance, dietary energetics, and carcass characteristics. Fifty Holstein steer calves were utilized in a 322 d trial. Calves were blocked by initial shrunk body weight (134 ±5 kg) and randomly assigned to treatments within weight groups to 10 pens (5 steers per pen, 5 pens per treatment). Five pen groups received the ENDOVAC-Beef vaccination on d 28 and d 56, and the remaining 5 pens did not receive the ENDOVAC-Beef vaccination. All steers were fed the same steam-flaked corn-based growing-finishing diet. Vaccination did not affect (P ≥ 0.10) live weight, average daily gain, and dry matter intake during the 322 d feeding period. However, vaccination increased (P ≤ 0.04) gain efficiency and estimated dietary net energy values (NE) during the first 112 d on feed. Vaccination did not affect (P ≥ 0.14) gain efficiency or estimated dietary NE during the final 112 to 322 d, or over the entire feeding period (1 to 322 d). Vaccination did not affect (P ≥ 0.31) hot carcass weight, dressing percentage, and marbling score. However, vaccinating calf-fed Holstein steers with ENDOVAC-Beef increased (P ≤ 0.01) longissimus muscle area (LMA; 86.5 vs 76.8 cm2) and retail yield (51.3 vs 50.4); but, tended to increase (P = 0.07) carcass fat thickness. Morbidity and pink eye infection were low and not affect by treatment (P ≥ 0.18). We conclude that while vaccinating calf-fed Holstein steers with ENDOVAC-Beef did not have an overall effect on growth-performance, it increased (13%) LMA and retail carcass yield (1.8%).

297 The Effects of Chromium Propionate Supplementation to Yearling Steers in a Commercial Feedyard on Growth Performance, Carcass Characteristics and Health

2021 ◽  
Vol 99 (Supplement_3) ◽  
pp. 165-166
Author(s):  
Sara J Trojan ◽  
Jerilyn Hergenreder ◽  
Landon Canterbury ◽  
Tyler Leonhard ◽  
John M Long
Keyword(s):  
Growth Performance ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Respiratory Morbidity ◽  
Marbling Score ◽  
Muscle Area ◽  
High Performing ◽  
Chromium Propionate ◽  
Respiratory Treatment ◽  
Dietary Treatments

Abstract British crossbred steers [n = 3074; initial body weight (BW) = 358 ± 37 kg] were used to evaluate the effects of chromium propionate supplementation to yearling steers in a commercial feedyard on growth performance, carcass characteristics and health. Steers were blocked by initial BW; pens were assigned randomly to one of two dietary treatments within block. Treatments, replicated in 15 pens/treatment with 75 to 135 head per pen, included: 1) control, 0 mg supplemental Cr/kg dietary dry matter (DM) (CTL); 2) 0.50 mg supplemental Cr/kg diet DM (chromium propionate; KemTRACE® Chromium 0.04%, Kemin Industries, Des Moines, IA) (CR). Final BW (638 vs. 641 kg.), average daily gain, (1.81 vs. 1.82 kg), DM intake (11.02 vs. 11.02 kg) and gain efficiency (0.164 vs 0.165) did not differ between CTL and CR, respectively (P ≥ 0.75). No differences among treatments for hot carcass weight (407 vs. 408 kg., CTL and CR, respectively), dressing percentage, longissimus muscle area, or yield grade were observed (P ≥ 0.15). Twelfth-rib fat thickness tended (P = 0.10) to be greater for CR vs. CTL (1.55 vs 1.29 cm, respectively). A trend (P = 0.10) for marbling score to be higher for CR vs. CTL was detected (452 vs. 440, respectively). Distribution of quality grade was similar between CR and CTL; 1.52% of carcasses graded prime (P =0.68), and 87.2% of carcasses graded choice (P = 0.68). Respiratory morbidity was low (1.93%) and not different among treatments (P = 0.20); likewise, there was no difference in respiratory treatment rates between treatments (P ≥ 0.18). Supplementing Cr to high-performing yearling steers did not alter growth performance, carcass characteristics or health outcomes.

scholarly journals 140 Influence of Enogen Feed Corn and Conventional Yellow Dent Corn in Pelleted or Meal-based Diets on Finishing Pig Performance and Carcass Characteristics

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 71-71
Author(s):  
Hadley Williams ◽  
Mike D Tokach ◽  
Jason C Woodworth ◽  
Robert D Goodband ◽  
Joel M DeRouchey ◽  
...  
Keyword(s):  
Growth Performance ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Starch Gelatinization ◽  
Dent Corn ◽  
Conditioning Temperature ◽  
Finishing Pig ◽  
Pig Performance ◽  
Pellet Form ◽  
Main Effects

Abstract Previous research has indicated that starch gelatinization during the pelleting process is greater for Enogen® Feed corn compared to conventional yellow dent corn. Increasing starch gelatinization in the pellet increases the starch digestibility in the pig, which potentially leads to increased growth rate. Therefore, the objective of this study was to determine the effects of feeding Enogen Feed corn in meal or pellet form on finishing pig growth performance and carcass characteristics. A total of 288 pigs (53.0 ± 0.5 kg) were used with 8 pigs/pen and 9 pens/treatment in a 72-d study. Treatments were arranged in a 2×2 factorial with main effects of corn source (Enogen Feed corn or conventional yellow dent corn) and diet form (meal or pellet). Main effects of corn source and diet form as well as their interactions were tested. Pelleting parameters were established with a target conditioner temperature of 82.2°C and corn moisture of 13 to 14%. When pelleting the diets, the conditioning temperature for conventional yellow dent corn averaged 68.4°C and Enogen Feed corn averaged 67.7°C. The hot pellet temperature for conventional yellow dent corn averaged 75.1°C and 75.8°C for Enogen feed corn. For overall performance (d 0 to 72), no interactions between corn source and diet form were observed (P &gt; 0.05). There was a tendency (P &lt; 0.10) for slightly improved average daily gain (ADG) and gain:feed ratio (G:F) for pigs fed conventional yellow dent corn compared to those fed Enogen Feed corn. Pigs fed pelleted diets had increased (P &lt; 0.001) ADG, G:F, and hot carcass weight compared to pigs fed meal diets. In summary, feeding pelleted diets to finishing pigs increased ADG and G:F compared to those fed meal-based diets. There were no major differences observed between corn sources or interactions between corn source and diet form on growth performance.

scholarly journals Effects of coated and noncoated steroidal implants on growth performance, carcass characteristics, and serum estradiol-17β concentrations of finishing Holstein steers

2020 ◽  
Vol 4 (4) ◽  
Author(s):  
Pedro H V Carvalho ◽  
Mariana F Westphalen ◽  
Jonathan A Campbell ◽  
Tara L Felix
Keyword(s):  
Growth Performance ◽  
Animal Health ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Feed Ratio ◽  
Serum Estradiol ◽  
Trenbolone Acetate ◽  
Coated Implant ◽  
Daily Gain ◽  
Estradiol 17Β

Abstract The objectives of the study were to determine the effect of coated or noncoated hormone implants on growth performance, carcass characteristics, and serum estradiol-17β (E2) concentrations of Holstein steers fed a grain-based diet for 112 d. Seventy-nine Holstein steers [average initial body weight (BW) = 452 ± 5.5 kg] were stratified by BW and allotted to one of two treatments: 1) Holstein steers implanted with a coated implant containing 200 mg of trenbolone acetate (TBA) and 40 mg E2 (Revalor-XS (Merck Animal Health; Summit, NJ)] on day 0 (XS) or 2) Holstein steers implanted two times (days 0 and 56) with a noncoated implant containing 80 mg of TBA and 16 mg of E2 [(2IS) Revalor-IS (Merck Animal Health)]. Data were analyzed using the MIXED procedure of SAS (SAS Inst. Inc., Cary, NC). There was no effect (P ≥ 0.71) of implant strategy on initial, middle, and final BW. No effect (P ≥ 0.12) of implant strategy was observed on average daily gain, dry matter intake, or gain-to-feed ratio. There were no effects (P ≥ 0.11) of implant strategy on carcass characteristics. There was an implant × day interaction (P &lt; 0.01) for the circulation of serum E2 concentrations. Serum E2 concentration increased similarly 14 d after Holstein steers were implanted, regardless of implant strategy. At 28 d, after steers were implanted, steers in the XS group had less serum E2 concentration than Holstein steers in the 2IS group. However, at 56 d after the first implantation, both groups, once again, had similar serum E2 concentrations and E2 concentrations were less on day 56 than day 28 for both strategies. Holstein steers implanted with 2IS had greater serum E2 concentration on day 70 and E2 concentrations remained greater than serum E2 of Holstein steers implanted XS for the duration of the trial (day 112). In summary, there was no effect of coated or two doses of noncoated implant on growth performance or carcass characteristics of Holstein steers.

Sign in / Sign up

Export Citation Format

Share Document