scholarly journals Estimation of Effective Reaction Rate Constant for NO‐RBC Reaction in Microcirculation

2010 ◽  
Vol 24 (S1) ◽  
Author(s):  
Prabhakar Deonikar ◽  
Mahendra Kavdia
Keyword(s):  
Rate Constant ◽  
Reaction Rate ◽  
Reaction Rate Constant ◽  
Effective Reaction ◽  
Effective Reaction Rate

scholarly journals Determination of exothermic batch reactor specific model parameters

2019 ◽  
Vol 292 ◽  
pp. 01063
Author(s):  
Lubomír Macků
Keyword(s):  
Rate Constant ◽  
Reaction Rate ◽  
Batch Reactor ◽  
Specific Model ◽  
Reaction Rate Constant ◽  
Order Reaction ◽  
First Order Reaction ◽  
Model Parameters ◽  
Reactor Model ◽  
First Order

An alternative method of determining exothermic reactor model parameters which include first order reaction rate constant is described in this paper. The method is based on known in reactor temperature development and is suitable for processes with changing quality of input substances. This method allows us to evaluate the reaction substances composition change and is also capable of the reaction rate constant (parameters of the Arrhenius equation) determination. Method can be used in exothermic batch or semi- batch reactors running processes based on the first order reaction. An example of such process is given here and the problem is shown on its mathematical model with the help of simulations.

Performance of Photocatalytic Microfiltration with Hollow Fiber Membrane

2007 ◽  
Vol 544-545 ◽  
pp. 95-98 ◽  
Author(s):  
Jong Tae Jung ◽  
Jong Oh Kim ◽  
Won Youl Choi
Keyword(s):  
Heavy Metals ◽  
Humic Acid ◽  
Rate Constant ◽  
Hollow Fiber ◽  
Reaction Rate ◽  
Hollow Fiber Membrane ◽  
Membrane Surface ◽  
Reaction Rate Constant ◽  
Operational Parameters ◽  
Tio2 Particles

The purpose of this study is to investigate the effect of the operational parameters of the UV intensity and TiO2 dosage for the removal of humic acid and heavy metals. It also evaluated the applicability of hollow fiber microfiltration for the separation of TiO2 particles in photocatalytic microfiltration systems. TiO2 powder P-25 Degussa and hollow fiber microfiltration with a 0.4 μm nominal pore size were used for experiments. Under the conditions of pH 7 and a TiO2 dosage 0.3 g/L, the reaction rate constant (k) for humic acid and heavy metals increased with an increase of the UV intensity in each process. For the UV/TiO2/MF process, the reaction rate constant (k) for humic acid and Cu, with the exception of Cr in a low range of UV intensity, was higher compared to that of UV/TiO2 due to the adsorption of the membrane surface. The reaction rate constant (k) increased as the TiO2 dosage increased in the range of 0.1~0.3 g/L. However it decreased for a concentration over 0.3 g/L of TiO2. For the UV/TiO2/MF process, TiO2 particles could be effectively separated from treated water via membrane rejection. The average removal efficiency for humic acid and heavy metals during the operational time was over 90 %. Therefore, photocatalysis with a membrane is believed to be a viable process for humic acid and heavy metals removal.

Reaction rate constant of SO3+ NH3in the gas phase

1990 ◽  
Vol 95 (D9) ◽  
pp. 13981 ◽  
Author(s):  
Gaunlin Shen ◽  
Masako Suto ◽  
L. C. Lee
Keyword(s):  
Gas Phase ◽  
Rate Constant ◽  
Reaction Rate ◽  
Reaction Rate Constant

Prediction of Chemical Reaction Yield in a Microreactor and Development of a Pilot Plant Using the Numbering-Up of Microreactors

2010 ◽  
Author(s):  
Shigenori Togashi ◽  
Yukako Asano ◽  
Yoshishige Endo
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Chemical Reaction ◽  
Rate Constant ◽  
Pilot Plant ◽  
Reaction Rate ◽  
Main Product ◽  
Reaction Rate Constant ◽  
Reaction Yield ◽  
Production Scale

The chemical reaction yield was predicted by using Monte Carlo simulation. The targeted chemical reaction of a performance evaluation using the microreactor is the consecutive reaction. The main product P1 is formed in the first stage with the reaction rate constant k1. Moreover, the byproduct P2 is formed in the second stage with the reaction rate constant k2. It was found that the yield of main product P1 was improved by using a microreactor when the ratio of the reaction rate constants became k1/k2 >1. To evaluate the Monte Carlo simulation result, the yields of the main products obtained in three consecutive reactions. It was found that the yield of the main product in cased of k1/k2 >1 increased when the microreactor was uesd. Next, a pilot plant involving the numbering-up of 20 microreactors was developed. The 20 microreactor units were stacked in four sets, each containing five microreactor units arranged. The maximum flow rate when 20 microreactors were used was 1 × 104 mm3/s, which corresponds to 72 t/year. Evaluation of the chemical performance of the pilot plant was conducted using a nitration reaction. The pilot plant was found to capable of increasing the production scale without decreasing the yield of the products.

scholarly journals Kinetics and Thermodynamics Study of Ultrasound-Assisted Depolymerization of k-Carrageenan in Acidic Solution

2020 ◽  
Vol 15 (1) ◽  
pp. 280-289
Author(s):  
Ratnawati Ratnawati ◽  
Nita Indriyani
Keyword(s):  
Molecular Weight ◽  
Rate Constant ◽  
Reaction Rate ◽  
Acidic Solution ◽  
Biomedical Application ◽  
Bond Cleavage ◽  
Reaction Rate Constant ◽  
Order Kinetic ◽  
Kinetics And Thermodynamics ◽  
Ultrasound Assisted

K-carrageenan is a natural polymer with high molecular weight ranging from 100 to 1000 kDa. The oligocarrageenan with low molecular weight is widely used in biomedical application. The aim of this work was to depolymerize k-carrageenan in an acidic solution with the assistance of ultrasound irradiation. The ultrasonication was conducted at various pH (3 and 6), temperatures (30-60 °C), and depolymerization time (0-24 minutes). The results show that the depolymerization reaction follows pseudo-first-order kinetic model with reaction rate constant of 1.856×10-7 to 2.138×10-6 s-1. The reaction rate constant increases at higher temperature and lower pH. The Q10-temperature coefficients of the depolymerization are 1.25 and 1.51 for pH 6 and 3, respectively. The enthalpy of activation (ΔH‡) and the Gibbs energy of activation (ΔG‡) are positive, while the entropy of activation (ΔS‡) is negative, indicating that the activation step of the ultrasound-assisted depolymerization of k-carrageenan is endothermic, non-spontaneous, and the molecules at the transition state is more ordered than at the ground state. The ΔH‡ and the ΔS‡ are not affected by temperature, while the ΔG‡ is a weak function of temperature. The ΔH‡ and ΔS‡ become smaller at higher pH, while the ΔG‡ increases with the increase of pH. The kinetics and thermodynamics analysis show that the ultrasound-assisted depolymerization of k-carrageenan in acidic solution is possibly through three mechanisms, i.e. bond cleavage due to cavitational effect of microbubbles, hydroxyl radical and hydrogen peroxide, as well as proton. Copyright © 2020 BCREC Group. All rights reserved 

scholarly journals Fast and Efficient Piezo/Photocatalytic Removal of Methyl Orange Using SbSI Nanowires

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4803
Author(s):  
Krystian Mistewicz ◽  
Mirosława Kępińska ◽  
Marian Nowak ◽  
Agnieszka Sasiela ◽  
Maciej Zubko ◽  
...  
Keyword(s):  
Methyl Orange ◽  
Rate Constant ◽  
Reaction Rate ◽  
Reaction Rate Constant ◽  
Sonochemical Method ◽  
Reaction Rate Constants ◽  
Short Period ◽  
Photocatalytic Removal ◽  
Antimony Sulfoiodide ◽  
Novel Method

Piezocatalysis is a novel method that can be applied for degradation of organic pollutants in wastewater. In this paper, ferroelectric nanowires of antimony sulfoiodide (SbSI) have been fabricated using a sonochemical method. Methyl orange (MO) was chosen as a typical pollutant, as it is widely used as a dye in industry. An aqueous solution of MO at a concentration of 30 mg/L containing SbSI nanowires (6 g/L) was subjected to ultrasonic vibration. High degradation efficiency of 99.5% was achieved after an extremely short period of ultrasonic irradiation (40 s). The large reaction rate constant of 0.126(8) s−1 was determined for piezocatalytic MO decomposition. This rate constant is two orders of magnitude larger than values of reaction rate constants reported in the literature for the most efficient piezocatalysts. These promising experimental results have proved a great potential of SbSI nanowires for their application in environmental purification and renewable energy conversion.

scholarly journals Kinetic and Mechanistic Study of Rhodamine B Degradation by H2O2 and Cu/Al2O3/g-C3N4 Composite

Catalysts ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 317 ◽  
Author(s):  
Chunsun Zhou ◽  
Zhongda Liu ◽  
Lijuan Fang ◽  
Yulian Guo ◽  
Yanpeng Feng ◽  
...  
Keyword(s):  
Rate Constant ◽  
Rhodamine B ◽  
Active Sites ◽  
Reaction Rate ◽  
Reaction Rate Constant ◽  
Mechanistic Study ◽  
Al2o3 Composite ◽  
Degradation Rates ◽  
Wide Range ◽  
Alkaline Conditions

The classic Fenton reaction, which is driven by iron species, has been widely explored for pollutant degradation, but is strictly limited to acidic conditions. In this work, a copper-based Fenton-like catalyst Cu/Al2O3/g-C3N4 was proposed that achieves high degradation efficiencies for Rhodamine B (Rh B) in a wide range of pH 4.9–11.0. The Cu/Al2O3 composite was first prepared via a hydrothermal method followed by a calcination process. The obtained Cu/Al2O3 composite was subsequently stabilized on graphitic carbon nitride (g-C3N4) by the formation of C−O−Cu bonds. The obtained composites were characterized through FT-IR, XRD, TEM, XPS, and N2 adsorption/desorption isotherms, and the immobilized Cu+ was proven to be active sites. The effects of Cu content, g-C3N4 content, H2O2 concentration, and pH on Rh B degradation were systematically investigated. The effect of the catalyst dose was confirmed with a specific reaction rate constant of (5.9 ± 0.07) × 10−9 m·s−1 and the activation energy was calculated to be 71.0 kJ/mol. In 100 min 96.4% of Rh B (initial concentration 20 mg/L, unadjusted pH (4.9)) was removed in the presence of 1 g/L of catalyst and 10 mM of H2O2 at 25 °C, with an observed reaction rate constant of 6.47 × 10−4 s−1. High degradation rates are achieved at neutral and alkaline conditions and a low copper leaching (0.55 mg/L) was observed even after four reaction cycles. Hydroxyl radical (HO·) was identified as the reactive oxygen species by using isopropanol as a radical scavenger and by ESR analysis. HPLC-MS revealed that the degradation of Rh B on Cu/Al2O3/CN composite involves N-de-ethylation, hydroxylation, de-carboxylation, chromophore cleavage, ring opening, and the mineralization process. Based on the results above, a tentative mechanism for the catalytic performance of the Cu/Al2O3/g-C3N4 composite was proposed. In summary, the characteristics of high degradation rate constants, low ion leaching, and the excellent applicability in neutral and alkaline conditions prove the Cu/Al2O3/g-C3N4 composite to be a superior Fenton-like catalyst compared to many conventional ones.

Sign in / Sign up

Export Citation Format

Share Document