scholarly journals A biomimetic accelerometer inspired by the cricket's clavate hair

2014 ◽  
Vol 11 (97) ◽  
pp. 20140438 ◽  
Author(s):  
H. Droogendijk ◽  
M. J. de Boer ◽  
R. G. P. Sanders ◽  
G. J. M. Krijnen
Keyword(s):  
Resonance Frequency ◽  
Microelectromechanical Systems ◽  
Dynamic Range ◽  
Detection Threshold ◽  
Gravitational Acceleration ◽  
Noise Levels ◽  
Short Term ◽  
Directional Response ◽  
System A ◽  
Short Term Adaptation

Crickets use so-called clavate hairs to sense (gravitational) acceleration to obtain information on their orientation. Inspired by this clavate hair system, a one-axis biomimetic accelerometer has been developed and fabricated using surface micromachining and SU-8 lithography. An analytical model is presented for the design of the accelerometer, and guidelines are derived to reduce responsivity due to flow-induced contributions to the accelerometer's output. Measurements show that this microelectromechanical systems (MEMS) hair-based accelerometer has a resonance frequency of 320 Hz, a detection threshold of 0.10 ms −2 and a dynamic range of more than 35 dB. The accelerometer exhibits a clear directional response to external accelerations and a low responsivity to airflow. Further, the accelerometer's physical limits with respect to noise levels are addressed and the possibility for short-term adaptation of the sensor to the environment is discussed.

Short-term adaptation to auditory-visual discordance: The ventriloquism aftereffect

2001 ◽  
Author(s):  
Jean Vroomen ◽  
Paul Bertelson ◽  
Ilja Frissen ◽  
Beatrice De Gelder
Keyword(s):  
Short Term ◽  
Short Term Adaptation ◽  
Ventriloquism Aftereffect

Determination of allostatic load dynamics in the assessment of adaptation in temporary workers in the Arctic

2020 ◽  
pp. 547-548
Author(s):  
O. Yu. Atkov ◽  
S. G. Gorokhova
Keyword(s):  
Body Mass Index ◽  
Glucose Level ◽  
Shift Work ◽  
Allostatic Load ◽  
The Arctic ◽  
Temporary Workers ◽  
Short Term ◽  
Short Term Adaptation ◽  
The Individual

The individual dynamics of the allostatic load index was revealed mainly due to changes in the glucose level, body mass index, which makes it applicable for assessing the short-term adaptation to the stay in the conditions of shift work

scholarly journals Coulomb-actuated microbeams revisited: experimental and numerical modal decomposition of the saddle-node bifurcation

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Anton Melnikov ◽  
Hermann A. G. Schenk ◽  
Jorge M. Monsalve ◽  
Franziska Wall ◽  
Michael Stolz ◽  
...  
Keyword(s):  
Finite Element ◽  
Microelectromechanical Systems ◽  
Dynamic Range ◽  
Dynamic Performance ◽  
Major Step ◽  
Element Analysis ◽  
Electrostatic Actuators ◽  
Voltage Range ◽  
Drive Voltage ◽  
Depth Analysis

AbstractElectrostatic micromechanical actuators have numerous applications in science and technology. In many applications, they are operated in a narrow frequency range close to resonance and at a drive voltage of low variation. Recently, new applications, such as microelectromechanical systems (MEMS) microspeakers (µSpeakers), have emerged that require operation over a wide frequency and dynamic range. Simulating the dynamic performance under such circumstances is still highly cumbersome. State-of-the-art finite element analysis struggles with pull-in instability and does not deliver the necessary information about unstable equilibrium states accordingly. Convincing lumped-parameter models amenable to direct physical interpretation are missing. This inhibits the indispensable in-depth analysis of the dynamic stability of such systems. In this paper, we take a major step towards mending the situation. By combining the finite element method (FEM) with an arc-length solver, we obtain the full bifurcation diagram for electrostatic actuators based on prismatic Euler-Bernoulli beams. A subsequent modal analysis then shows that within very narrow error margins, it is exclusively the lowest Euler-Bernoulli eigenmode that dominates the beam physics over the entire relevant drive voltage range. An experiment directly recording the deflection profile of a MEMS microbeam is performed and confirms the numerical findings with astonishing precision. This enables modeling the system using a single spatial degree of freedom.

scholarly journals A Low-g MEMS Accelerometer with High Sensitivity, Low Nonlinearity and Large Dynamic Range Based on Mode-Localization of 3-DoF Weakly Coupled Resonators

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 310
Author(s):  
Muhammad Mubasher Saleem ◽  
Shayaan Saghir ◽  
Syed Ali Raza Bukhari ◽  
Amir Hamza ◽  
Rana Iqtidar Shakoor ◽  
...  
Keyword(s):  
Microelectromechanical Systems ◽  
Dynamic Range ◽  
Proof Mass ◽  
Amplitude Ratio ◽  
Silicon On Insulator ◽  
Coupled Resonators ◽  
Mode Localization ◽  
Mems Accelerometer ◽  
Weakly Coupled ◽  
Input Acceleration

This paper presents a new design of microelectromechanical systems (MEMS) based low-g accelerometer utilizing mode-localization effect in the three degree-of-freedom (3-DoF) weakly coupled MEMS resonators. Two sets of the 3-DoF mechanically coupled resonators are used on either side of the single proof mass and difference in the amplitude ratio of two resonator sets is considered as an output metric for the input acceleration measurement. The proof mass is electrostatically coupled to the perturbation resonators and for the sensitivity and input dynamic range tuning of MEMS accelerometer, electrostatic electrodes are used with each resonator in two sets of 3-DoF coupled resonators. The MEMS accelerometer is designed considering the foundry process constraints of silicon-on-insulator multi-user MEMS processes (SOIMUMPs). The performance of the MEMS accelerometer is analyzed through finite-element-method (FEM) based simulations. The sensitivity of the MEMS accelerometer in terms of amplitude ratio difference is obtained as 10.61/g for an input acceleration range of ±2 g with thermomechanical noise based resolution of 0.22 and nonlinearity less than 0.5%.

Imperfect crowding adaptation of mammalian cells towards osmotic stress and its modulation by osmolytes

2017 ◽  
Vol 13 (11) ◽  
pp. 2218-2221 ◽  
Author(s):  
David Gnutt ◽  
Oliver Brylski ◽  
Eugen Edengeiser ◽  
Martina Havenith ◽  
Simon Ebbinghaus
Keyword(s):  
Osmotic Stress ◽  
Mammalian Cells ◽  
Short Term ◽  
Short Term Adaptation

The short-term adaptation of cellular crowding after osmotic stress is imperfect but can be modulated by the osmolyte TMAO.

Recovery from Adaptation to Moving Gratings

Perception ◽  
1977 ◽  
Vol 6 (6) ◽  
pp. 719-725 ◽  
Author(s):  
Max J Keck ◽  
Benjamin Pentz
Keyword(s):  
Time Course ◽  
Spontaneous Recovery ◽  
Motion Aftereffect ◽  
Time Decay ◽  
Short Term ◽  
Test Grating ◽  
Test Conditions ◽  
Sinusoidal Gratings ◽  
Short Term Adaptation

Short-term adaptation to moving sinusoidal gratings results in a motion aftereffect which decays in time. The time decay of the motion aftereffect has been measured psychophysically, and it is found to depend on (i) the spontaneous recovery from the adapted state, and (ii) the contrast of the test grating. We have measured the decays for various test conditions. An extrapolation of the measurements allows us to obtain a decay which represents the time course of the spontaneous recovery of the direction-sensitive mechanisms.

scholarly journals Asymmetric short-term adaptation of the vertical vestibulo-ocular reflex in humans

2006 ◽  
Vol 172 (3) ◽  
pp. 343-350 ◽  
Author(s):  
Sarah Marti ◽  
Christopher J. Bockisch ◽  
Dominik Straumann
Keyword(s):  
Short Term ◽  
Ocular Reflex ◽  
Short Term Adaptation ◽  
Vestibulo Ocular Reflex

scholarly journals Analytical Modeling and Validation of a Preloaded Piezoceramic Current Output

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 353
Author(s):  
Bin Zhang ◽  
Hongsheng Liu ◽  
Dezhi Li ◽  
Jinhui Liang ◽  
Jun Gao
Keyword(s):  
Energy Harvesting ◽  
Integrated Circuit ◽  
Microelectromechanical Systems ◽  
Experimental Testing ◽  
Current Source ◽  
Model Parameters ◽  
Current Output ◽  
System A ◽  
A Current ◽  
Piezoelectric Characteristics

Energy harvesting using piezoceramic has drawn a lot of attention in recent years. Its potential usage in microelectromechanical systems is starting to become a reality thanks to the development of an integrated circuit. An accurate equivalent circuit of piezoceramic is important in energy harvesting and the sensing system. A piezoceramic is always considered to be a current source according to empirical testing, instead of the derivation from its piezoelectric characteristics, which lacks accuracy under complicated mechanical excitation situations. In this study, a new current output model is developed to accurately estimate its value under various kinds of stimulation. Considering the frequency, amplitude and preload variation imposed on a piezoceramic, the multivariate model parameters are obtained in relation to piezo coefficients. Using this model, the current output could be easily calculated without experimental testing in order to quickly estimate the output power in energy harvesting whatever its geometric shape and the various excitations.

Modelling of Io’s Atmosphere for the IVO Mission

2021 ◽  
Author(s):  
Peter Wurz ◽  
Audrey Vorburger ◽  
Alfred McEwen ◽  
Kathy Mandt ◽  
Ashley Davies ◽  
...  
Keyword(s):  
Mass Loss ◽  
Dynamic Range ◽  
Detection Threshold ◽  
Mass Range ◽  
Mission Design ◽  
Integration Time ◽  
Many Worlds ◽  
Initial State ◽  
Atmospheric Escape ◽  
Tidal Heating

<p>The Io Volcano Observer (IVO) is a proposed NASA Discovery-class mission (currently in Phase A), that would launch<span> in early 2029, arrive at </span> Jupiter in the early 2033, and perform ten flybys of Io while in Jupiter's orbit. IVO's mission motto is to 'follow the heat', shedding light onto tidal heating as a fundamental planetary process. Specifically, IVO will determine (i) how and where heat is generated in Io's interior, (ii) how heat is transported to the surface, and (iii) how Io has evolved with time. The answers to these questions will fill fundamental gaps in the current understanding of the evolution and habitability of many worlds across our Solar System and beyond where tidal heating plays a key role, and will give us insight into how early Earth, Moon, and Mars may have worked.</p><p>One of the five key science questions IVO will be addressing is determining Io's mass loss via atmospheric escape. Understanding Io's mass loss today will offer information on how the chemistry of Io has been altered from its initial state and would provide useful clues on how atmospheres on other bodies have evolved over time. IVO plans on measuring Io's mass loss in situ with the Ion and Neutral Mass Spectrometer (INMS), a successor to the instrument currently being built for the JUpiter Icy moons Explorer (JUICE). INMS will measure neutrals and ions in the mass range 1 – 300 u, with a mass resolution (M/ΔM) of 500, a dynamic range of > 10<sup>5</sup>, a detection threshold of 100 cm<sup>–3</sup> for an integration time of 5 s, and a cadence of 0.5 – 300 s per spectrum.</p><p>In preparation for IVO, we model atmospheric density profiles of species known and expected to be present on Io's surface from both measurements and previous modelling efforts. Based on the IVO mission design, we present three different measurement scenarios for INMS we expect to encounter at Io based on the planned flybys: (i) a purely sublimated atmosphere, (ii) the 'hot' atmosphere generated by lava fields, and (iii) the plume gases resulting from volcanic activity. We calculate the expected mass spectra to be recorded by INMS during these flybys for these atmospheric scenarios.</p>

scholarly journals Neural Rate and Timing Cues for Detection and Discrimination of Amplitude-Modulated Tones in the Awake Rabbit Inferior Colliculus

2007 ◽  
Vol 97 (1) ◽  
pp. 522-539 ◽  
Author(s):  
Paul C. Nelson ◽  
Laurel H. Carney
Keyword(s):  
Inferior Colliculus ◽  
Dynamic Range ◽  
Modulation Depth ◽  
Average Rate ◽  
Modulation Frequency ◽  
Detection Threshold ◽  
Depth Functions ◽  
Depth Discrimination ◽  
High Modulation ◽  
Envelope Processing

Neural responses to amplitude-modulated (AM) tones in the unanesthetized rabbit inferior colliculus (IC) were studied in an effort to establish explicit relationships between physiological and psychophysical measures of temporal envelope processing. Specifically, responses to variations in modulation depth ( m) at the cell’s best modulation frequency, with and without modulation maskers, were quantified in terms of average rate and synchronization to the envelope over the entire perceptual dynamic range of depths. Statistically significant variations in the metrics were used to define neural AM detection and discrimination thresholds. Synchrony emerged at modulation depths comparable with psychophysical AM detection sensitivities in some neurons, whereas the lowest rate-based neural thresholds could not account for psychoacoustical thresholds. The majority of rate thresholds (85%) were −10 dB or higher (in 20 log m), and 16% of the population exhibited no systematic dependence of average rate on m. Neural thresholds for AM detection did not decrease systematically at higher SPLs (as observed psychophysically): thresholds remained constant or increased with level for most cells tested at multiple sound-pressure levels (SPLs). At depths higher than the rate-based detection threshold, some rate modulation-depth functions were sufficiently steep with respect to the across-trial variability of the rate to predict depth discrimination thresholds as low as 1 dB (comparable with the psychophysics). Synchrony, on the other hand, did not vary systematically with m in many cells at high modulation depths. A simple computational model was extended to reproduce several features of the modulation frequency and depth dependence of both transient and sustained pure-tone responders.

Sign in / Sign up

Export Citation Format

Share Document