Broadband high-efficiency near-infrared graphene phase modulators enabled by metal–nanoribbon integrated hybrid plasmonic waveguides

The phase modulator is a key component in optical communications for its phase modulation functions. In this paper, we numerically demonstrate a variety of ultra-compact high-efficiency graphene phase modulators (GPMs) based on metal–nanoribbon integrated hybrid plasmonic waveguides in the near-infrared region. Benefiting from the good in-plane mode polarization matching and strong hybrid surface plasmon polariton and graphene interaction, the 20 μm-length GPM can achieve excellent phase modulation performance with a good phase and amplitude decoupling effect, a low insertion loss around 0.3 dB/μm, a high modulation efficiency with V π L π of 118.67 V μm at 1.55 μm, which is 1–3 orders improvement compared to the state-of-the-art graphene modulators. Furthermore, it has a wide modulation bandwidth of 67.96 GHz, a low energy consumption of 157.49 fJ/bit, and a wide operating wavelength ranging from 1.3 to 1.8 μm. By reducing the overlap width of the graphene–Al2O3–graphene capacitor, the modulation bandwidth and energy consumption of the modulator can be further improved to 370.36 GHz and 30.22 fJ/bit, respectively. These compact and energy-efficient GPMs may hold a key to various high-speed telecommunications, interconnects, and other graphene-based integrated photonics applications.

Determine the Physical Mechanism and Source Region of Beat Wave Modulation by Changing the Frequency of HF Waves

This paper introduces a new approach for the determination of the source region of BW (beat wave) modulation. This type of modulation is achieved by transmitting HF continuous waves with a frequency difference of f, where f is the frequency of modulated ELF/VLF (extremely low frequency/very low frequency) waves from two sub-arrays of a high power HF transmitter. Despite the advantages of BW modulation in terms of generating more stable ELF/VLF signal and high modulation efficiency, there exists a controversy on the physical mechanism of BW and its source region. In this paper, the two controversial theories, i.e. BW based on D-E region thermal nonlinearity and BW based on F region ponderomotive nonlinearity are examined for cases where each of these two theories exists exclusively or both of them exist simultaneously. According to the analysis and the simulation results presented in this paper, it is found that the generated VLF signal amplitude exhibits significant variation as a function of HF frequency in different source regions. Therefore, this characteristic can be utilised as a potential new approach to determine the physical mechanism and source location of BW.

Modulation Technique for Modified Active Quasi-Z-Source Inverter with Common-Mode Voltage Reduction

In Z-source topologies, a high-amplitude common-mode voltage can occur when shoot-through states are inserted. In this study, a new space vector pulse-width modulation for an active quasi-Z-source topology is proposed to operate at a high modulation index and reduce the common-mode voltage to one-third of the DC-link voltage. Moreover, the quality of the output voltage is improved by operation with a high modulation index and decreasing the switching loss of the H-bridge switches. The detailed operating principles of the active quasi-Z-source topology using the proposed space vector modulation (SVM) method are presented. A simulation model was built, and an experimental prototype was verified to correct the theoretical analysis.

Graphene Optical Modulators Using Bound States in the Continuum

Graphene-based optical modulators have been widely investigated due to the high mobility and tunable permittivity of graphene. However, achieving a high modulation depth with a low insertion loss is challenging owing to low graphene-light interaction. To date, only waveguide-type modulators have been extensively studied to improve light-graphene interaction, and few free-space type modulators have been demonstrated in the optical communication wavelength range. In this study, we propose two graphene-based optical free-space type modulators in a simple silicon photonic crystal structure that supports bound states in the continuum. The designed modulator with an ultra-high quality factor from the bound states in the continuum achieves a high modulation depth (MD = 0.9972) and low insertion loss (IL=0.0034) with a small Fermi level change at the optical communication wavelength. In addition, the proposed modulators support outstanding modulation performance in the normal chemical vapor deposition (CVD) graphene (mobility = 0.5 m2/Vs). We believe the scheme may pave the way for graphene-based optical active devices.

Band structure tuning of g-C3N4 via sulfur doping for broadband near-infrared ultrafast photonic applications

Graphitic carbon nitride (g-C3N4) featuring a stable heptazine ring structure and high polymerization degree, was indexed as a high thermochemical stability material, attracting rising research enthusiasm for diverse applications. However, the poor near-infrared (NIR) optical absorption and resulting limited NIR applications were pronounced for g-C3N4 due to its large bandgap of 2.7 eV. In the present work, sulfur-doping was manifested by first-principles calculations to introduce impurity level and result in anisotropic spin splitting in g-C3N4 for enhancing broadband nonlinear optical characteristics in NIR regime. The modified sulfur-doped g-C3N4 (S-C3N4) exhibited the maximum effective nonlinear absorption coefficient to be −0.82 cm/GW. Pulse duration within hundred nanoseconds was realized with high modulation stability employing S-C3N4 as saturable absorber in Q-switching operations. Moreover, broadband ultrafast photonics properties were successfully demonstrated in constructed ytterbium-doped and erbium-doped fiber lasers, generating highly stable dissipative soliton and traditional soliton mode-locking pulses. The presented S-C3N4 nanomaterial with remarkable nonlinear optical performances might explicitly boost the development and application of g-C3N4 materials in advanced optoelectronic and ultrafast photonic devices.

Neurometric correlates to sensitive high-frequency sound amplitude modulation detection by mice

Amplitude modulation (AM) is a common feature of natural sounds, including speech and animal vocalizations. Here, we used operant conditioning and in vivo electrophysiology to determine the AM detection threshold of mice as well as its underlying neuronal encoding. Mice were trained in a Go-NoGo task to detect the transition to AM within a noise stimulus designed to prevent the use of spectral side-bands or a change in intensity as alternative cues. Our results indicate that mice, in comparison with other species, detect high modulation frequencies up to 512 Hz exceptionally well, but show poor performance at low frequencies. Our in vivo multielectrode recordings in the inferior colliculus (IC) of both anesthetized and awake mice revealed a few single units with remarkable phase-locking ability to 512 Hz modulation, but not sufficient to explain the good behavioral detection. Using a model of the population response that combined dimensionality reduction with threshold detection, we reproduced the general high-pass characteristics of behavioral detection based on a subset of neurons showing the largest firing rate change (both increase and decrease) in response to AM. Our data thus identify candidate neurons in the IC to explain the high-pass transfer function for AM detection in the mouse.

Artifact-free holographic light shaping through moving acousto-optic holograms

Holographic light modulation is the most efficient method to shape laser light into well-defined patterns and is therefore the means of choice for many intensity demanding applications. During the last two decades, spatial light modulators based on liquid crystals prevailed among several technologies and became the standard tool to shape light holographically. But in the near future, this status might be challenged by acousto-optic deflectors. These devices are well known for their excelling modulation rates and high optical power resilience. But only few scattered precedents exist that demonstrate their holographic capabilities, despite the many interesting properties that they provide. We implemented a holographic acousto-optic light modulation (HALM) system, that is based on displaying holograms on acousto-optic deflectors. We found that this system can eliminate the ubiquitous coherent artifacts that arise in holography through the inherent motion of acousto-optic holograms. That distinguishes our approach from any other holographic modulation technique and allows to reconstruct intensity patterns of the highest fidelity. A mathematical description of this effect is presented and experimentally confirmed by reconstructing images holographically with unprecedented quality. Our results suggest that HALM promotes acousto-optic deflectors from highly specialized devices to full-fledged spatial light modulators, that can compete in a multitude of applications with LC-SLMs. Especially applications that require large optical output powers, high modulation speeds or accurate gray-scale intensity patterns will profit from this technology. We foresee that HALM may play a major role in future laser projectors and displays, structured illumination microscopy, laser material processing and optical trapping.

VCSEL with multi-transverse cavities with bandwidth beyond 100 GHz

To fulfill the demands of high-speed photonic applications, researchers, and engineers have been working to improve the modulation bandwidth (MBW) of semiconductor lasers. We extend our prior work on modeling a vertical-cavity surface-emitting laser (VCSEL) with multiple transverse-coupled-cavities (MTCCs) to evaluate the feasibility of boosting MBW beyond 100 GHz in this study. Because of the strong coupling of slow-light feedback from nearby lateral transverse coupled cavities (TCCs) into the VCSEL cavity, the laser has a high modulation performance. The intensity modulation response of the VCSEL design using one, two, four, and six TCCs is compared. Due to the optical-feedback (OFB) from short TCCs, which achieves 3 dB MBW reaching 170 GHz, photon–photon-resonance (PPR) is projected to occur at ultra-high frequencies beyond 145 GHz. In terms of the Fourier spectrum of the relative intensity noise (RIN), we characterize the noise features of the MTCC-VCSEL in the ultra-high bandwidth domain.

Design of an On-Chip Plasmonic Modulator Based on Hybrid Orthogonal Junctions Using Vanadium Dioxide

We present the design of a plasmonic modulator based on hybrid orthogonal silver junctions using vanadium dioxide as the modulating material on a silicon-on-insulator. The modulator has an ultra-compact footprint of 1.8 μm × 1 μm with a 100 nm × 100 nm modulating section based on the hybrid orthogonal geometry. The modulator takes advantage of the large change in the refractive index of vanadium dioxide during its phase transition to achieve a high modulation depth of 46.89 dB/μm. The simulated device has potential applications in the development of next generation high frequency photonic modulators for optical communications which require nanometer scale footprints, large modulation depth and small insertion losses.

The effects of the cross-entropy stopping criterion and quadrature amplitude modulation on iterative turbo decoding performance

One of the most often-used stopping criteria is the cross-entropy stopping criterion (CESC). The CESC can stop turbo decoder iterations early by calculating mutual information improvements while maintaining bit error rate (BER) performance. Most research on iterative turbo decoding stopping criteria has utilised low-modulation methods, such as binary phase-shift keying. However, a high-speed network requires high modulation to transfer data at high speeds. Hence, a high modulation technique needs to be integrated into the CESC to match its speed. Therefore, the present paper investigated and analysed the effects of the CESC and quadrature amplitude modulation (QAM) on iterative turbo decoding. Three thresholds were simulated and tested under four situations: different code rates, different QAM formats, different code generators, and different frame sizes. The results revealed that in most situations, the use of CESC is suitable only when the signal-to-noise ratio (SNR) is high. This is because the CESC significantly reduces the average iteration number (AIN) while maintaining the BER. The CESC can terminate early at a high SNR and save more than 40% AIN compared with the fixed stopping criterion. Meanwhile, at a low SNR, the CESC fails to terminate early, which results in maximum AIN.