scholarly journals From atomistic interfaces to dendritic patterns

2018 ◽  
Vol 376 (2113) ◽  
pp. 20170210 ◽  
Author(s):  
P. K. Galenko ◽  
D. V. Alexandrov
Keyword(s):  
Computational Modelling ◽  
Experimental Tests ◽  
Theoretical Models ◽  
Boundary Integral ◽  
Transport Processes ◽  
Atomic Scale ◽  
Theme Issue ◽  
Two Phase ◽  
Field Methods ◽  
Atomistic Modelling

Transport processes around phase interfaces, together with thermodynamic properties and kinetic phenomena, control the formation of dendritic patterns. Using the thermodynamic and kinetic data of phase interfaces obtained on the atomic scale, one can analyse the formation of a single dendrite and the growth of a dendritic ensemble. This is the result of recent progress in theoretical methods and computational algorithms calculated using powerful computer clusters. Great benefits can be attained from the development of micro-, meso- and macro-levels of analysis when investigating the dynamics of interfaces, interpreting experimental data and designing the macrostructure of samples. The review and research articles in this theme issue cover the spectrum of scales (from nano- to macro-length scales) in order to exhibit recently developing trends in the theoretical analysis and computational modelling of dendrite pattern formation. Atomistic modelling, the flow effect on interface dynamics, the transition from diffusion-limited to thermally controlled growth existing at a considerable driving force, two-phase (mushy) layer formation, the growth of eutectic dendrites, the formation of a secondary dendritic network due to coalescence, computational methods, including boundary integral and phase-field methods, and experimental tests for theoretical models—all these themes are highlighted in the present issue. This article is part of the theme issue ‘From atomistic interfaces to dendritic patterns’.

The analysis on the influence of mixed sliding-rolling motion mode to precision degradation of ball screw

2021 ◽  
pp. 095440622098201
Author(s):  
Qiang Cheng ◽  
Baobao Qi ◽  
Hongyan Chu ◽  
Ziling Zhang ◽  
Zhifeng Liu ◽  
...  
Keyword(s):  
Structural Parameters ◽  
Experimental Tests ◽  
Theoretical Models ◽  
Operating Conditions ◽  
Ball Screw ◽  
Rolling Motion ◽  
Degradation Model ◽  
Sliding Motion ◽  
Factors Analysis ◽  
Motion Mode

The combination of sliding/rolling motion can influence the degree of precision degradation of ball screw. Precision degradation modeling and factors analysis can reveal the evolution law of ball screw precision. This paper presents a precision degradation model for factors analysis influencing precision due to mixed sliding-rolling motion. The precision loss model was verified through the comparison of theoretical models and experimental tests. The precision degradation due to rolling motion between the ball and raceway accounted for 29.09% of the screw precision loss due to sliding motion. Additionally, the total precision degradation due to rolling motion accounted for 21.03% of the total sliding precision loss of the screw and nut, and 17.38% of the overall ball screw precision loss under mixed sliding-rolling motion. In addition, the effects of operating conditions and structural parameters on precision loss were analyzed. The sensitivity coefficients of factors influencing were used to quantitatively describe impact degree on precision degradation.

scholarly journals Investigation of Pressure Oscillation and Cavitation Characteristics for Submerged Self-Resonating Waterjet

2021 ◽  
Vol 11 (15) ◽  
pp. 6972
Author(s):  
Lihua Cui ◽  
Fei Ma ◽  
Tengfei Cai
Keyword(s):  
Sudden Change ◽  
Three Dimensional ◽  
Pressure Oscillation ◽  
Experimental Tests ◽  
Low Pressure ◽  
The Self ◽  
Two Phase ◽  
Cavitation Phenomenon ◽  
Pressure Zone ◽  
Unsteady Characteristics

The cavitation phenomenon of the self-resonating waterjet for the modulation of erosion characteristics is investigated in this paper. A three-dimensional computational fluid dynamics (CFD) model was developed to analyze the unsteady characteristics of the self-resonating jet. The numerical model employs the mixture two-phase model, coupling the realizable turbulence model and Schnerr–Sauer cavitation model. Collected data from experimental tests were used to validate the model. Results of numerical simulations and experimental data frequency bands obtained by the Fast Fourier transform (FFT) method were in very good agreement. For better understanding the physical phenomena, the velocity, the pressure distributions, and the cavitation characteristics were investigated. The obtained results show that the sudden change of the flow velocity at the outlet of the nozzle leads to the forms of the low-pressure zone. When the pressure at the low-pressure zone is lower than the vapor pressure, the cavitation occurs. The flow field structure of the waterjet can be directly perceived through simulation, which can provide theoretical support for realizing the modulation of the erosion characteristics, optimizing nozzle structure.

scholarly journals Solitary flexural–gravity waves in three dimensions

2018 ◽  
Vol 376 (2129) ◽  
pp. 20170345 ◽  
Author(s):  
Olga Trichtchenko ◽  
Emilian I. Părău ◽  
Jean-Marc Vanden-Broeck ◽  
Paul Milewski
Keyword(s):  
Gravity Waves ◽  
Three Dimensional ◽  
Ice Sheet ◽  
Boundary Integral ◽  
Three Dimensions ◽  
Cosserat Theory ◽  
Theme Issue ◽  
Flexural Gravity Waves ◽  
Forced Waves ◽  
Ice Phenomena

The focus of this work is on three-dimensional nonlinear flexural–gravity waves, propagating at the interface between a fluid and an ice sheet. The ice sheet is modelled using the special Cosserat theory of hyperelastic shells satisfying Kirchhoff's hypothesis, presented in (Plotnikov & Toland. 2011 Phil. Trans. R. Soc. A 369 , 2942–2956 ( doi:10.1098/rsta.2011.0104 )). The fluid is assumed inviscid and incompressible, and the flow irrotational. A numerical method based on boundary integral equation techniques is used to compute solitary waves and forced waves to Euler's equations. This article is part of the theme issue ‘Modelling of sea-ice phenomena’.

scholarly journals Experimental Investigation of Droplet Injections in the Vicinity of the Critical Point: A comparison of different model approaches

2017 ◽  
Author(s):  
Christoph Steinhausen ◽  
Grazia Lamanna ◽  
Bernhard Weigand ◽  
Rolf Stierle ◽  
Joachim Groß ◽  
...  
Keyword(s):  
Experimental Investigation ◽  
Raman Scattering ◽  
High Pressures ◽  
Region Of Interest ◽  
Theoretical Models ◽  
Nitrogen Atmosphere ◽  
Material Surface ◽  
Atmospheric Conditions ◽  
Mixing Processes ◽  
Two Phase

The disintegration process of liquid fuel within combustion chambers is one of the most important parameters forefficient and stable combustion. Especially for high pressures exceeding the critical value of the injected fluids the mixing processes are not fully understood yet. Recently, different theoretical macroscopic models have been introduced to understand breakdown of the classical two phase regime and predict the transition from evaporation to a diffuse-mixing process. In order to gain deeper insight into the physical processes of this transition, a parametric study of free-falling n-pentane droplets in an inert nitrogen atmosphere is presented. Atmospheric conditions varied systematically from sub- to supercritical values with respect to the fluid properties. An overlay of a diffuse lighted image with a shadowgram directly in the optical setup (front lighted shadowgraphy) was applied to simultaneously detect the presence of a material surface of the droplet as well as changes in density gradients in the surrounding atmosphere. The experimental investigation illustrates, that the presence of a material surface cannot be shown by a direct shadowgram. However, reflections and refractions caused by diffuse ambient illumination are able to indicate the presence of a material surface. In case of the supercritical droplet injections in this study, front lighted shadowgraphy clearly revealed the presence of a material surface, even when the pre-heated droplets are released into a supercritical atmosphere. This detection of the droplet interface indicates, that the droplet remains subcritical in the region of interest, even though it is injected into a supercritical atmosphere. Based on the adiabatic mixing assumption recent Raman-scattering results in the wake of the droplet are re-evaluated to compute the temperature distribution. Presented experimental findings as well as the re-evaluation of recent Raman scattering results are compared to thermodynamic models to predict the onset of diffuse-mixing and supercritical disintegration of the droplet. Additionally, a one dimensional evaporation model is used to evaluate the validity of the adiabatic mixing assumption in the estimation of the droplet temperature. The presented findings contribute to the understanding of recent theoretical models for prediction of spray and droplet disintegration and the onset of diffuse-mixing processes.DOI: http://dx.doi.org/10.4995/ILASS2017.2017.4635

A Theoretical and Experimental Analysis of the Bending Behavior of Unbonded Flexible Pipes

2014 ◽  
Author(s):  
Tatiana Vargas-Londoño ◽  
José Renato M. de Sousa ◽  
Carlos Magluta ◽  
Ney Roitman
Keyword(s):  
Internal Pressure ◽  
Cross Section ◽  
Structural Response ◽  
Experimental Tests ◽  
Theoretical Models ◽  
External Pressure ◽  
Local Behavior ◽  
Flexible Pipes ◽  
Floating System ◽  
Bending Loads

Due to its compound cross-section, the prediction of the structural response of flexible pipes to loads such as their self-weight, internal and external pressure, movements imposed by the floating system and environmental loads such as currents, waves and wind is quite complex. All these loads generate stresses and strains in the cross section of the pipe that have to be properly evaluated in order to ensure integrity of the line. Research has been done on the local behavior of flexible pipes under combined axisymmetric loads as well as under bending loads. However, there is a lack of research combining both axisymmetric and bending loads, as also in the study of the strains in the tensile amour layers of the pipes, aspects which are important for the calibration of theoretical models to predict such behavior. Based on that, this study aims to evaluate the local behavior of flexible pipes under combinations of axisymmetric (tension, and internal pressure) and bending loads via a series of experimental tests in a 9.13″ I.D pipe. In the experimental tests, the behavior of the pipe was studied for three load combinations: i) bending combined with tension; ii) bending combined with internal pressure; and iii) bending combined with tension and internal pressure. Based on these tests, the authors obtained the strains in the tensile armor layer, axial elongation due to tension, axial reaction forces due to internal pressure, and deflection due to bending. These measurements were used to calibrate a theoretical model devoted to simulate the pipe’s response, getting accurate results for stiffness and stresses of the pipe in each scenario.

scholarly journals Mutual assessment during ritualized fighting in mantis shrimp (Stomatopoda)

2018 ◽  
Vol 285 (1871) ◽  
pp. 20172542 ◽  
Author(s):  
P. A. Green ◽  
S. N. Patek
Keyword(s):  
Body Size ◽  
Network Analysis ◽  
Experimental Tests ◽  
Theoretical Models ◽  
Resource Holding Potential ◽  
Self Assessment ◽  
Mantis Shrimp ◽  
Behavioural Analysis ◽  
Survival And Reproduction ◽  
Strong Inference

Safe and effective conflict resolution is critical for survival and reproduction. Theoretical models describe how animals resolve conflict by assessing their own and/or their opponent's ability (resource holding potential, RHP), yet experimental tests of these models are often inconclusive. Recent reviews have suggested this uncertainty could be alleviated by using multiple approaches to test assessment models. The mantis shrimp Neogonodactylus bredini presents visual displays and ritualistically exchanges high-force strikes during territorial contests. We tested how N. bredini contest dynamics were explained by any of three assessment models—pure self-assessment, cumulative assessment and mutual assessment—using correlations and a novel, network analysis-based sequential behavioural analysis. We staged dyadic contests over burrow access between competitors matched either randomly or based on body size. In both randomly and size-matched contests, the best metric of RHP was body mass. Burrow residency interacted with mass to predict outcome. Correlations between contest costs and RHP rejected pure self-assessment, but could not fully differentiate between cumulative and mutual assessment. The sequential behavioural analysis ruled out cumulative assessment and supported mutual assessment. Our results demonstrate how multiple analyses provide strong inference to tests of assessment models and illuminate how individual behaviours constitute an assessment strategy.

scholarly journals Conquering the inner couch potato: precommitment is an effective strategy to enhance motivation for effortful actions

2018 ◽  
Vol 374 (1766) ◽  
pp. 20180131 ◽  
Author(s):  
Bettina Studer ◽  
Carolin Koch ◽  
Stefan Knecht ◽  
Tobias Kalenscher
Keyword(s):  
Risk Taking ◽  
Small Reward ◽  
Computational Modelling ◽  
Self Control ◽  
Clinical Implications ◽  
Theme Issue ◽  
Choice Behaviour ◽  
Impulsive Behaviour ◽  
Theoretical Perspectives ◽  
Regulatory Measure

Letting effort-free gratification derail us from effort-requiring goals is one reason why we fail to realize health-relevant intentions like ‘exercise regularly’. We tested the effectiveness of the self-control strategy precommitment in such effort-related conflicts, using a novel laboratory choice paradigm, where participants could precommit to an effort-requiring large reward by pre-eliminating an effort-free small reward from their choice set. Our participants used precommitment frequently and effectively, such that they reached effort-requiring large rewards more often. Using computational modelling and Bayesian model comparisons, we assessed whether participants employed precommitment to avoid anticipated willpower failures (i.e. as a self-regulatory measure) or to maximize their motivation to choose the effort-requiring option (i.e. as a self-motivational measure). Observed choices and precommitment decisions were consistent with the motivation maximization hypothesis, but not the willpower hypothesis. Our findings show that offering precommitment is effective in helping individuals optimize their motivation and choice behaviour and thereby achieve effort-requiring goals, and strongly encourage application of precommitment schemes in exercise and rehabilitation interventions. This article is part of the theme issue ‘Risk taking and impulsive behaviour: fundamental discoveries, theoretical perspectives and clinical implications’.

scholarly journals Avalanche Dynamics. Review of Experiments and Theoretical Models of Flow and Powder-Snow Avalanches

1983 ◽  
Vol 29 (102) ◽  
pp. 283-285 ◽  
Author(s):  
Thomas Scheiwiller ◽  
Kolumban Hutter
Keyword(s):  
Shear Flow ◽  
Granular Materials ◽  
Binary Mixtures ◽  
Theoretical Models ◽  
Gravity Currents ◽  
Phase Model ◽  
Snow Avalanches ◽  
Two Phase ◽  
Avalanche Dynamics ◽  
Fluctuation Energy

Abstract The paper of which this is an extended abstract reviews theoretical formulations for flow and airborne powder-snow avalanches. First powder-snow avalanches are considered as plane turbulent gravity currents. Then we propose a two-phase model describing powder-snow avalanches as turbulent binary mixtures of snow granules and air. An analogy is postulated between flow avalanches and the rapid shear flow of granular materials which leads to a non-polar continuum with microstructure taking into account the fluctuation energy of the snow granules.

Sign in / Sign up

Export Citation Format

Share Document