scholarly journals Presence of the vomeronasal system in aquatic salamanders

2000 ◽  
Vol 355 (1401) ◽  
pp. 1209-1213 ◽  
Author(s):  
Heather L. Eisthen
Keyword(s):  
Electron Microscopy ◽  
Common Ancestor ◽  
Vomeronasal Organ ◽  
Last Common Ancestor ◽  
Vomeronasal System ◽  
Necturus Maculosus ◽  
Transmission Electron ◽  
Terrestrial Life ◽  
Olfactory Systems ◽  
Aquatic Salamanders

Previous reports have indicated that members of the proteid family of salamanders lack a vomeronasal system, and this absence has been interpreted as representing the ancestral condition for aquatic amphibians. I examined the anatomy of the nasal cavities, nasal epithelia, and forebrains of members of the proteid family, mudpuppies ( Necturus maculosus ), as well as members of the amphiumid and sirenid families ( Amphiuma tridactylum and Siren intermedia ). Using a combination of light and transmission electron microscopy, I found no evidence that mudpuppies possess a vomeronasal system, but found that amphiuma and sirens possess both vomeronasal and olfactory systems. Amphiumids and sirenids are considered to be outgroups relative to proteids; therefore, these data indicate that the vomeronasal system is generally present in salamanders and has been lost in mudpuppies. Given that the vomeronasal system is generally present in aquatic amphibians, and that the last common ancestor of amphibians and amniotes is believed to have been fully aquatic, I conclude that the vomeronasal system arose in aquatic tetrapods and did not originate as an adaptation to terrestrial life. This conclusion has important implications for the hypothesis that the vomeronasal organ is specialized for detection of non–volatile compounds.

scholarly journals Comparative morphology of gill glands in externally fertilizing and inseminating species of cheirodontine fishes, with implications on the phylogeny of the family Characidae (Actinopterygii: Characiformes)

2012 ◽  
Vol 10 (2) ◽  
pp. 349-360 ◽  
Author(s):  
Cristina L. C. de Oliveira ◽  
Luiz R. Malabarba ◽  
John R. Burns
Keyword(s):  
Electron Microscopy ◽  
Common Ancestor ◽  
Comparative Morphology ◽  
Variable Number ◽  
Single Origin ◽  
Clade B ◽  
Transmission Electron ◽  
The Family ◽  
Gill Filaments ◽  
Scanning Electron

The structure and form of gill gland among inseminating and externally fertilizing species of the Cheirodontinae are described under light microscopy, scanning electron microscopy, and transmission electron microscopy, and compared to other members of the family Characidae. At least one species from thirteen cheirodontine genera were analyzed, totaling seventeen species. Gill glands were found in all analyzed mature males of Cheirodontinae and were always absent in females, being located on the anteriormost portion of the lower branch of the first gill arch, extending posteriorly through a variable number of gill filaments. Gill glands of all cheirodontines and of all characid species in which this organ has been described possess the same structure, being considered homologous and supporting a single origin of the structure in a common ancestor to Clade A and Clade B characids.

Techniques for Transmission Electron Microscopy of Fiber-Matrix Interfaces in Aluminum Alloy-Boron Composites by Ion Erosio

1971 ◽  
Vol 29 ◽  
pp. 204-205
Author(s):  
G. G. Shaw
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Aluminum Alloy ◽  
Electron Beam ◽  
Pure Aluminum ◽  
Ion Milling ◽  
Transmission Electron ◽  
Fiber Matrix ◽  
Ion Erosion ◽  
Row Of Fibers

The morphology and composition of the fiber-matrix interface can best be studied by transmission electron microscopy and electron diffraction. For some composites satisfactory samples can be prepared by electropolishing. For others such as aluminum alloy-boron composites ion erosion is necessary.When one wishes to examine a specimen with the electron beam perpendicular to the fiber, preparation is as follows: A 1/8 in. disk is cut from the sample with a cylindrical tool by spark machining. Thin slices, 5 mils thick, containing one row of fibers, are then, spark-machined from the disk. After spark machining, the slice is carefully polished with diamond paste until the row of fibers is exposed on each side, as shown in Figure 1.In the case where examination is desired with the electron beam parallel to the fiber, preparation is as follows: Experimental composites are usually 50 mils or less in thickness so an auxiliary holder is necessary during ion milling and for easy transfer to the electron microscope. This holder is pure aluminum sheet, 3 mils thick.

Direct Observation of Heat Exchanger Deposits by Cross Sectioning

1967 ◽  
Vol 25 ◽  
pp. 364-365
Author(s):  
R. W. Anderson ◽  
D. L. Senecal
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Heat Exchanger ◽  
Direct Observation ◽  
Cross Sections ◽  
Preparation Method ◽  
Specimen Preparation ◽  
Flowing Water ◽  
Transmission Electron ◽  
Deposit Layer

A problem was presented to observe the packing densities of deposits of sub-micron corrosion product particles. The deposits were 5-100 mils thick and had formed on the inside surfaces of 3/8 inch diameter Zircaloy-2 heat exchanger tubes. The particles were iron oxides deposited from flowing water and consequently were only weakly bonded. Particular care was required during handling to preserve the original formations of the deposits. The specimen preparation method described below allowed direct observation of cross sections of the deposit layers by transmission electron microscopy.The specimens were short sections of the tubes (about 3 inches long) that were carefully cut from the systems. The insides of the tube sections were first coated with a thin layer of a fluid epoxy resin by dipping. This coating served to impregnate the deposit layer as well as to protect the layer if subsequent handling were required.

Phase Transformations in Ti-7w/oMo-3w/oMe Alloy

1974 ◽  
Vol 32 ◽  
pp. 514-515
Author(s):  
S. Fujishiro
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Mechanical Processing ◽  
Ray Method ◽  
X Ray ◽  
Transmission Electron ◽  
Water Quench ◽  
Alpha Beta

The mechanical properties of three titanium alloys (Ti-7Mo-3Al, Ti-7Mo- 3Cu and Ti-7Mo-3Ta) were evaluated as function of: 1) Solutionizing in the beta field and aging, 2) Thermal Mechanical Processing in the beta field and aging, 3) Solutionizing in the alpha + beta field and aging. The samples were isothermally aged in the temperature range 300° to 700*C for 4 to 24 hours, followed by a water quench. Transmission electron microscopy and X-ray method were used to identify the phase formed. All three alloys solutionized at 1050°C (beta field) transformed to martensitic alpha (alpha prime) upon being water quenched. Despite this heavily strained alpha prime, which is characterized by microtwins the tensile strength of the as-quenched alloys is relatively low and the elongation is as high as 30%.

Ultrastructural Analysis of the Salivary Glands of Gromphadorhina Portentosa (Schaum)

1977 ◽  
Vol 35 ◽  
pp. 638-639
Author(s):  
P.J. Dailey
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Salivary Glands ◽  
Secretory Vesicles ◽  
The Past ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
Gromphadorhina Portentosa ◽  
Scanning Electron ◽  
Topographical Relief

The structure of insect salivary glands has been extensively investigated during the past decade; however, none have attempted scanning electron microscopy (SEM) in ultrastructural examinations of these secretory organs. This study correlates fine structure by means of SEM cryofractography with that of thin-sectioned epoxy embedded material observed by means of transmission electron microscopy (TEM).Salivary glands of Gromphadorhina portentosa were excised and immediately submerged in cold (4°C) paraformaldehyde-glutaraldehyde fixative1 for 2 hr, washed and post-fixed in 1 per cent 0s04 in phosphosphate buffer (4°C for 2 hr). After ethanolic dehydration half of the samples were embedded in Epon 812 for TEM and half cryofractured and subsequently critical point dried for SEM. Dried specimens were mounted on aluminum stubs and coated with approximately 150 Å of gold in a cold sputtering apparatus.Figure 1 shows a cryofractured plane through a salivary acinus revealing topographical relief of secretory vesicles.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Transmission Electron Microscopy Studies of Pore Cells in Limax Maximus

1977 ◽  
Vol 35 ◽  
pp. 656-657
Author(s):  
B. S. Beltz
Keyword(s):  
Electron Microscopy ◽  
Cell Periphery ◽  
Salivary Duct ◽  
Terrestrial Mollusc ◽  
Buccal Ganglia ◽  
Transmission Electron ◽  
Pore Cells ◽  
Gland Tissue ◽  
Storage Area ◽  
Limax Maximus

The cells which are described in this study surround the salivary nerve of the terrestrial mollusc, Limax maximus. The salivary system of Limax consists of bilateral glands, ducts, and nerves. The salivary nerves originate at the buccal ganglia, which are situated on the posterior face of the buccal mass, and run along the salivary duct to the gland. The salivary nerve branches several times near the gland, and eventually sends processes into the gland.The pore cells begin to appear at the first large branch point of the salivary nerve, near the gland (Figure 1). They follow the nerve distally and eventually accompany the nerve branches into the gland tissue. The cells are 20-50 microns in diameter and contain very small nuclei (1-5 microns) (Figure 2).The cytoplasm of the pore cells is segregated into a storage area of glycogen and an organelle region located in a band around the cell periphery (Figure 3).

Comparative Microstructures of Ion Milled and Electrochemically Thinned Composite Materials

1974 ◽  
Vol 32 ◽  
pp. 546-547
Author(s):  
R.R. Russell
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Composite Materials ◽  
Great Difficulty ◽  
Ion Milling ◽  
Transmission Electron ◽  
Ion Damage ◽  
Intermetallic Composite

Transmission electron microscopy of metallic/intermetallic composite materials is most challenging since the microscopist typically has great difficulty preparing specimens with uniform electron thin areas in adjacent phases. The application of ion milling for thinning foils from such materials has been quite effective. Although composite specimens prepared by ion milling have yielded much microstructural information, this technique has some inherent drawbacks such as the possible generation of ion damage near sample surfaces.

Maytansine-Induced Mitotic Arrest in Human Lymphoblasts

1977 ◽  
Vol 35 ◽  
pp. 460-461
Author(s):  
Tai-Te Chao ◽  
John Sullivan ◽  
Awtar Krishan
Keyword(s):  
Electron Microscopy ◽  
Cell Cycle ◽  
Transmission Electron Microscopy ◽  
Tubulin Polymerization ◽  
Vinca Alkaloids ◽  
Antimitotic Activity ◽  
Transmission Electron ◽  
Flow Microfluorometry ◽  
Brain Tubulin

Maytansine, a novel ansa macrolide (1), has potent anti-tumor and antimitotic activity (2, 3). It blocks cell cycle traverse in mitosis with resultant accumulation of metaphase cells (4). Inhibition of brain tubulin polymerization in vitro by maytansine has also been reported (3). The C-mitotic effect of this drug is similar to that of the well known Vinca- alkaloids, vinblastine and vincristine. This study was carried out to examine the effects of maytansine on the cell cycle traverse and the fine struc- I ture of human lymphoblasts.Log-phase cultures of CCRF-CEM human lymphoblasts were exposed to maytansine concentrations from 10-6 M to 10-10 M for 18 hrs. Aliquots of cells were removed for cell cycle analysis by flow microfluorometry (FMF) (5) and also processed for transmission electron microscopy (TEM). FMF analysis of cells treated with 10-8 M maytansine showed a reduction in the number of G1 cells and a corresponding build-up of cells with G2/M DNA content.

Scanning and Transmission Microscopy of Nematocyst Batteries in Epitheliomuscular Cells of Hydra

1971 ◽  
Vol 29 ◽  
pp. 410-411 ◽  
Author(s):  
Jane A. Westfall ◽  
S. Yamataka ◽  
Paul D. Enos
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Osmium Tetroxide ◽  
External Surface ◽  
Three Dimensional ◽  
Surface Structures ◽  
Transmission Microscopy ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Scanning Electron

Scanning electron microscopy (SEM) provides three dimensional details of external surface structures and supplements ultrastructural information provided by transmission electron microscopy (TEM). Animals composed of watery jellylike tissues such as hydras and other coelenterates have not been considered suitable for SEM studies because of the difficulty in preserving such organisms in a normal state. This study demonstrates 1) the successful use of SEM on such tissue, and 2) the unique arrangement of batteries of nematocysts within large epitheliomuscular cells on tentacles of Hydra littoralis.Whole specimens of Hydra were prepared for SEM (Figs. 1 and 2) by the fix, freeze-dry, coat technique of Small and Màrszalek. The specimens were fixed in osmium tetroxide and mercuric chloride, freeze-dried in vacuo on a prechilled 1 Kg brass block, and coated with gold-palladium. Tissues for TEM (Figs. 3 and 4) were fixed in glutaraldehyde followed by osmium tetroxide. Scanning micrographs were taken on a Cambridge Stereoscan Mark II A microscope at 10 KV and transmission micrographs were taken on an RCA EMU 3G microscope (Fig. 3) or on a Hitachi HU 11B microscope (Fig. 4).

Sign in / Sign up

Export Citation Format

Share Document