scholarly journals Oxygen diffusion in ellipsoidal tumour spheroids

2018 ◽  
Author(s):  
David Robert Grimes ◽  
Frederick J. Currell
Keyword(s):  
Oxygen Consumption ◽  
Oxygen Diffusion ◽  
Drug Distribution ◽  
Substantial Effect ◽  
Experimental Models ◽  
Oxygen Distribution ◽  
New Methods ◽  
Tumour Spheroids ◽  
Cellular Oxygen

AbstractOxygen plays a central role in cellular metabolism, in both healthy and tumour tissue. The presence and concentration of molecular oxygen in tumours has a substantial effect on both radiotherapy response and tumour evolution, and as a result the oxygen micro-environment is an area of intense research interest. Multicellular tumour spheroids closely mimic real avascular tumours, and in particular they exhibit physiologically relevant heterogeneous oxygen distribution. This property has made them a vital part of in vitro experimentation. For ideal spheroids, their heterogeneous oxygen distributions can be predicted from theory, allowing determination of cellular oxygen consumption rate (OCR) and anoxic extent. However, experimental tumour spheroids often depart markedly from perfect sphericity. There has been little consideration of this reality. To date, the question of how far an ellipsoid can diverge from perfect sphericity before spherical assumptions breakdown remains unanswered. In this work we derive equations governing oxygen distribution (and more generally, nutrient and drug distribution) in both prolate and oblate tumour ellipsoids, and quantify the theoretical limits of the assumption that the spheroid is a perfect sphere. Results of this analysis yield new methods for quantifying OCR in ellipsoidal spheroids, and how this can be applied to markedly increase experimental throughput and quality.Author summaryMulticellular tumour spheroids (MCTS) are an increasingly important tool in cancer research, exhibiting non-homogeneous oxygen distributions and central necrosis. These are more similar to in situ avascular tumours than conventional 2D biology, rendering them exceptionally useful experimental models. Analysis of spheroids can yield vital information about cellular oxygen consumption rates, and the heterogeneous oxygen contribution. However, such analysis pivots on the assumption of perfect sphericity, when in reality spheroids often depart from such an ideal. In this work, we construct a theoretical oxygen diffusion model for ellipsoidal tumour spheroids in both prolate and oblate geometries. With these models established, we quantify the limits of the spherical assumption, and illustrate the effect of this assumption breaking down. Methods of circumventing this breakdown are also presented, and the analysis here suggests new methods for expanding experimental throughput to also include ellipsoidal data.

scholarly journals Oxygen diffusion in ellipsoidal tumour spheroids

2018 ◽  
Vol 15 (145) ◽  
pp. 20180256 ◽  
Author(s):  
David Robert Grimes ◽  
Frederick J. Currell
Keyword(s):  
Consumption Rate ◽  
Drug Distribution ◽  
Substantial Effect ◽  
Oxygen Distribution ◽  
New Methods ◽  
Experimental Tumour ◽  
Tumour Spheroids ◽  
Cellular Oxygen

Oxygen plays a central role in cellular metabolism, in both healthy and tumour tissue. The presence and concentration of molecular oxygen in tumours has a substantial effect on both radiotherapy response and tumour evolution, and as a result the oxygen micro-environment is an area of intense research interest. Multi-cellular tumour spheroids closely mimic real avascular tumours, and in particular they exhibit physiologically relevant heterogeneous oxygen distribution. This property has made them a vital part of in vitro experimentation. For ideal spheroids, their heterogeneous oxygen distributions can be predicted from theory, allowing determination of cellular oxygen consumption rate (OCR) and anoxic extent. However, experimental tumour spheroids often depart markedly from perfect sphericity. There has been little consideration of this reality. To date, the question of how far an ellipsoid can diverge from perfect sphericity before spherical assumptions break down remains unanswered. In this work, we derive equations governing oxygen distribution (and, more generally, nutrient and drug distribution) in both prolate and oblate tumour ellipsoids, and quantify the theoretical limits of the assumption that the spheroid is a perfect sphere. Results of this analysis yield new methods for quantifying OCR in ellipsoidal spheroids, and how this can be applied to markedly increase experimental throughput and quality.

scholarly journals Quantitative analysis of tumour spheroid structure

eLife ◽  
2021 ◽  
Vol 10 ◽  
Author(s):  
Alexander P Browning ◽  
Jesse A Sharp ◽  
Ryan J Murphy ◽  
Gency Gunasingh ◽  
Brodie Lawson ◽  
...  
Keyword(s):  
Cell Lines ◽  
Tumour Microenvironment ◽  
Culture Conditions ◽  
Experimental Models ◽  
Seeding Density ◽  
Modelling Framework ◽  
Tumour Spheroid ◽  
Tumour Spheroids ◽  
Wide Range

Tumour spheroids are common in vitro experimental models of avascular tumour growth. Compared with traditional two-dimensional culture, tumour spheroids more closely mimic the avascular tumour microenvironment where spatial differences in nutrient availability strongly influence growth. We show that spheroids initiated using significantly different numbers of cells grow to similar limiting sizes, suggesting that avascular tumours have a limiting structure; in agreement with untested predictions of classical mathematical models of tumour spheroids. We develop a novel mathematical and statistical framework to study the structure of tumour spheroids seeded from cells transduced with fluorescent cell cycle indicators, enabling us to discriminate between arrested and cycling cells and identify an arrested region. Our analysis shows that transient spheroid structure is independent of initial spheroid size, and the limiting structure can be independent of seeding density. Standard experimental protocols compare spheroid size as a function of time; however, our analysis suggests that comparing spheroid structure as a function of overall size produces results that are relatively insensitive to variability in spheroid size. Our experimental observations are made using two melanoma cell lines, but our modelling framework applies across a wide range of spheroid culture conditions and cell lines.

scholarly journals Quantitative analysis of tumour spheroid structure

2021 ◽  
Author(s):  
Alexander P Browning ◽  
Jesse A Sharp ◽  
Ryan J Murphy ◽  
Gency Gunasingh ◽  
Brodie Lawson ◽  
...  
Keyword(s):  
Cell Lines ◽  
Tumour Microenvironment ◽  
Culture Conditions ◽  
Experimental Models ◽  
Seeding Density ◽  
Modelling Framework ◽  
Tumour Spheroid ◽  
Tumour Spheroids ◽  
Wide Range

Tumour spheroids are common in vitro experimental models of avascular tumour growth. Compared with traditional two-dimensional culture, tumour spheroids more closely mimic the avascular tumour microenvironment where spatial differences in nutrient availability strongly influence growth. We show that spheroids initiated using significantly different numbers of cells grow to similar limiting sizes, suggesting that avascular tumours have a limiting structure; in agreement with untested predictions of classical mathematical models of tumour spheroids. We develop a novel mathematical and statistical framework to study the structure of tumour spheroids seeded from cells transduced with fluorescent cell cycle indicators, enabling us to discriminate between arrested and cycling cells and identify an arrested region. Our analysis shows that transient spheroid structure is independent of initial spheroid size, and the limiting structure can be independent of seeding density. Standard experimental protocols compare spheroid size as a function of time; however, our analysis suggests that comparing spheroid structure as a function of overall size produces results that are relatively insensitive to variability in spheroid size. Our experimental observations are made using two melanoma cell lines, but our modelling framework applies across a wide range of spheroid culture conditions and cell lines.

Neutralization of a Low Molecular Weight Heparin (LHN-1) and Conventional Heparin by Protamine Sulfate in Rats

1986 ◽  
Vol 56 (03) ◽  
pp. 318-322 ◽  
Author(s):  
V Diness ◽  
P B Østergaard
Keyword(s):  
Molecular Weight ◽  
Low Molecular Weight Heparin ◽  
Thrombus Formation ◽  
Experimental Models ◽  
Protamine Sulfate ◽  
Low Molecular Weight ◽  
Antithrombotic Effect ◽  
Higher Doses

SummaryThe neutralization of a low molecular weight heparin (LHN-1) and conventional heparin (CH) by protamine sulfate has been studied in vitro and in vivo. In vitro, the APTT activity of CH was completely neutralized in parallel with the anti-Xa activity. The APTT activity of LHN-1 was almost completely neutralized in a way similar to the APTT activity of CH, whereas the anti-Xa activity of LHN-1 was only partially neutralized.In vivo, CH 3 mg/kg and LHN-1 7.2 mg/kg was given intravenously in rats. The APTT and anti-Xa activities, after neutralization by protamine sulfate in vivo, were similar to the results in vitro. In CH treated rats no haemorrhagic effect in the rat tail bleeding test and no antithrombotic effect in the rat stasis model was found at a protamine sulfate to heparin ratio of about 1, which neutralized APTT and anti-Xa activities. In LHN-1 treated rats the haemorrhagic effect was neutralized when APTT was close to normal whereas higher doses of protamine sulfate were required for neutralization of the antithrombotic effect. This probably reflects the fact that in most experimental models higher doses of heparin are needed to induce bleeding than to prevent thrombus formation. Our results demonstrate that even if complete neutralization of APTT and anti-Xa activities were not seen in LHN-1 treated rats, the in vivo effects of LHN-1 could be neutralized as efficiently as those of conventional heparin. The large fall in blood pressure caused by high doses of protamine sulfate alone was prevented by the prior injection of LHN-1.

3D Culture Modelling: An Emerging Approach for Translational Cancer Research in Sarcomas

2020 ◽  
Vol 27 (29) ◽  
pp. 4778-4788 ◽  
Author(s):  
Victoria Heredia-Soto ◽  
Andrés Redondo ◽  
José Juan Pozo Kreilinger ◽  
Virginia Martínez-Marín ◽  
Alberto Berjón ◽  
...  
Keyword(s):  
High Throughput Screening ◽  
Cancer Biology ◽  
Soft Tissues ◽  
Three Dimensional ◽  
3D Culture ◽  
Resistance Mechanisms ◽  
In Vitro Models ◽  
Tumour Spheroids ◽  
Current Therapies

Sarcomas are tumours of mesenchymal origin, which can arise in bone or soft tissues. They are rare but frequently quite aggressive and with a poor outcome. New approaches are needed to characterise these tumours and their resistance mechanisms to current therapies, responsible for tumour recurrence and treatment failure. This review is focused on the potential of three-dimensional (3D) in vitro models, including multicellular tumour spheroids (MCTS) and organoids, and the latest data about their utility for the study on important properties for tumour development. The use of spheroids as a particularly valuable alternative for compound high throughput screening (HTS) in different areas of cancer biology is also discussed, which enables the identification of new therapeutic opportunities in commonly resistant tumours.

Antimicrobial peptides for the treatment of pulmonary tuberculosis, allies or foes?

2018 ◽  
Vol 24 (10) ◽  
pp. 1138-1147
Author(s):  
Bruno Rivas-Santiago ◽  
Flor Torres-Juarez
Keyword(s):  
Pulmonary Tuberculosis ◽  
Antimicrobial Peptides ◽  
Experimental Models ◽  
New Drugs ◽  
World Health ◽  
Public Health Issue ◽  
Health Organization ◽  
Drug Resistant Strains

Tuberculosis is an ancient disease that has become a serious public health issue in recent years, although increasing incidence has been controlled, deaths caused by Mycobacterium tuberculosis have been accentuated due to the emerging of multi-drug resistant strains and the comorbidity with diabetes mellitus and HIV. This situation is threatening the goals of World Health Organization (WHO) to eradicate tuberculosis in 2035. WHO has called for the creation of new drugs as an alternative for the treatment of pulmonary tuberculosis, among the plausible molecules that can be used are the Antimicrobial Peptides (AMPs). These peptides have demonstrated remarkable efficacy to kill mycobacteria in vitro and in vivo in experimental models, nevertheless, these peptides not only have antimicrobial activity but also have a wide variety of functions such as angiogenesis, wound healing, immunomodulation and other well-described roles into the human physiology. Therapeutic strategies for tuberculosis using AMPs must be well thought prior to their clinical use; evaluating comorbidities, family history and risk factors to other diseases, since the wide function of AMPs, they could lead to collateral undesirable effects.

Epithelial Organotypic Cultures: A Viable Model to Address Mechanisms of Carcinogenesis by Epitheliotropic Viruses

2018 ◽  
Vol 18 (4) ◽  
pp. 246-255 ◽  
Author(s):  
Lara Termini ◽  
Enrique Boccardo
Keyword(s):  
Three Dimensional ◽  
Cell Types ◽  
Experimental Models ◽  
Biological Research ◽  
Specific Gene ◽  
Specific Cell ◽  
Organotypic Cultures ◽  
Skin Physiology

In vitro culture of primary or established cell lines is one of the leading techniques in many areas of basic biological research. The use of pure or highly enriched cultures of specific cell types obtained from different tissues and genetics backgrounds has greatly contributed to our current understanding of normal and pathological cellular processes. Cells in culture are easily propagated generating an almost endless source of material for experimentation. Besides, they can be manipulated to achieve gene silencing, gene overexpression and genome editing turning possible the dissection of specific gene functions and signaling pathways. However, monolayer and suspension cultures of cells do not reproduce the cell type diversity, cell-cell contacts, cell-matrix interactions and differentiation pathways typical of the three-dimensional environment of tissues and organs from where they were originated. Therefore, different experimental animal models have been developed and applied to address these and other complex issues in vivo. However, these systems are costly and time consuming. Most importantly the use of animals in scientific research poses moral and ethical concerns facing a steadily increasing opposition from different sectors of the society. Therefore, there is an urgent need for the development of alternative in vitro experimental models that accurately reproduce the events observed in vivo to reduce the use of animals. Organotypic cultures combine the flexibility of traditional culture systems with the possibility of culturing different cell types in a 3D environment that reproduces both the structure and the physiology of the parental organ. Here we present a summarized description of the use of epithelial organotypic for the study of skin physiology, human papillomavirus biology and associated tumorigenesis.

scholarly journals Organoids of the female reproductive tract

2021 ◽  
Vol 99 (4) ◽  
pp. 531-553 ◽  
Author(s):  
Cindrilla Chumduri ◽  
Margherita Y. Turco
Keyword(s):  
Reproductive Tract ◽  
Personalised Medicine ◽  
Three Dimensional ◽  
In Vitro Models ◽  
Experimental Models ◽  
Female Reproductive Tract ◽  
Cellular Heterogeneity ◽  
Dynamic Regulation ◽  
Pregnancy And Childbirth

AbstractHealthy functioning of the female reproductive tract (FRT) depends on balanced and dynamic regulation by hormones during the menstrual cycle, pregnancy and childbirth. The mucosal epithelial lining of different regions of the FRT—ovaries, fallopian tubes, uterus, cervix and vagina—facilitates the selective transport of gametes and successful transfer of the zygote to the uterus where it implants and pregnancy takes place. It also prevents pathogen entry. Recent developments in three-dimensional (3D) organoid systems from the FRT now provide crucial experimental models that recapitulate the cellular heterogeneity and physiological, anatomical and functional properties of the organ in vitro. In this review, we summarise the state of the art on organoids generated from different regions of the FRT. We discuss the potential applications of these powerful in vitro models to study normal physiology, fertility, infections, diseases, drug discovery and personalised medicine.

scholarly journals A “Smart” Biosensor-Enabled Intravascular Catheter and Platform for Dynamic Delivery of Propofol to “Close the Loop” for Total Intravenous Anesthesia

2021 ◽  
Vol 186 (Supplement_1) ◽  
pp. 370-377
Author(s):  
Edward Chaum ◽  
Ernő Lindner
Keyword(s):  
Real Time ◽  
Drug Distribution ◽  
Population Based ◽  
Pharmacokinetic Data ◽  
Drug Infusion ◽  
Blood Concentrations ◽  
The Usa ◽  
The Difference ◽  
Automated Delivery

ABSTRACT Background Target-controlled infusion anesthesia is used worldwide to provide user-defined, stable, blood concentrations of propofol for sedation and anesthesia. The drug infusion is controlled by a microprocessor that uses population-based pharmacokinetic data and patient biometrics to estimate the required infusion rate to replace losses from the blood compartment due to drug distribution and metabolism. The objective of the research was to develop and validate a method to detect and quantify propofol levels in the blood, to improve the safety of propofol use, and to demonstrate a pathway for regulatory approval for its use in the USA. Methods We conceptualized and prototyped a novel “smart” biosensor-enabled intravenous catheter capable of quantifying propofol at physiologic levels in the blood, in real time. The clinical embodiment of the platform is comprised of a “smart” biosensor-enabled catheter prototype, a signal generation/detection readout display, and a driving electronics software. The biosensor was validated in vitro using a variety of electrochemical methods in both static and flow systems with biofluids, including blood. Results We present data demonstrating the experimental detection and quantification of propofol at sub-micromolar concentrations using this biosensor and method. Detection of the drug is rapid and stable with negligible biofouling due to the sensor coating. It shows a linear correlation with mass spectroscopy methods. An intuitive graphical user interface was developed to: (1) detect and quantify the propofol sensor signal, (2) determine the difference between targeted and actual propofol concentration, (3) communicate the variance in real time, and (4) use the output of the controller to drive drug delivery from an in-line syringe pump. The automated delivery and maintenance of propofol levels was demonstrated in a modeled benchtop “patient” applying the known pharmacokinetics of the drug using published algorithms. Conclusions We present a proof-of-concept and in vitro validation of accurate electrochemical quantification of propofol directly from the blood and the design and prototyping of a “smart,” indwelling, biosensor-enabled catheter and demonstrate feedback hardware and software architecture permitting accurate measurement of propofol in blood in real time. The controller platform is shown to permit autonomous, “closed-loop” delivery of the drug and maintenance of user-defined propofol levels in a dynamic flow model.

Sign in / Sign up

Export Citation Format

Share Document