Atomic absorption background of Ba in EXAFS analysis of BaFe12O19nanoparticles

2011 ◽  
Vol 18 (4) ◽  
pp. 557-563 ◽  
Author(s):  
Jana Padežnik Gomilšek ◽  
Alojz Kodre ◽  
Iztok Arčon ◽  
Simone de Panfilis ◽  
Darko Makovec
Keyword(s):  
Aqueous Solution ◽  
Absorption Spectrum ◽  
Atomic Absorption ◽  
Energy Region ◽  
Structural Parameters ◽  
Simple Analytical Model ◽  
Absorption Signal ◽  
X Ray ◽  
Exafs Analysis ◽  
Atomic Absorption Spectra

The approximate barium X-ray atomic absorption in the energy region ofL-edges is reconstructed from the absorption spectrum of an aqueous solution of BaCl2. The result is corroborated by comparison with pure atomic absorption spectra of neighbour elements Xe and Cs. The application of the atomic absorption signal as a proper EXAFS background is demonstrated and discussed in the analysis of Ba hexaferrite nanoparticles with a very weak structural signal. The essential gain is found in the decrease of uncertainty intervals of structural parameters and their correlations. A simple analytical model of the absorption background for the practical EXAFS analysis is demonstrated.

Spherical wave exafs analysis of the silicon K-edge X-ray absorption spectrum

1987 ◽  
Vol 61 (10) ◽  
pp. 635-639 ◽  
Author(s):  
A. Di Cicco ◽  
A. Bianconi ◽  
N.V. Pavel
Keyword(s):  
Absorption Spectrum ◽  
Spherical Wave ◽  
X Ray ◽  
Exafs Analysis ◽  
X Ray Absorption

Is there a “universal” MAC equation?

1990 ◽  
Vol 48 (2) ◽  
pp. 228-229
Author(s):  
Robert E. Ogilvie
Keyword(s):  
Absorption Coefficient ◽  
Atomic Absorption ◽  
Atomic Number ◽  
X Ray ◽  
Time Period ◽  
Image Position

The search for an empirical absorption equation begins with the work of Siegbahn (1) in 1914. At that time Siegbahn showed that the value of (μ/ρ) for a given element could be expressed as a function of the wavelength (λ) of the x-ray photon by the following equationwhere C is a constant for a given material, which will have sudden jumps in value at critial absorption limits. Siegbahn found that n varied from 2.66 to 2.71 for various solids, and from 2.66 to 2.94 for various gases.Bragg and Pierce (2) , at this same time period, showed that their results on materials ranging from Al(13) to Au(79) could be represented by the followingwhere μa is the atomic absorption coefficient, Z the atomic number. Today equation (2) is known as the “Bragg-Pierce” Law. The exponent of 5/2(n) was questioned by many investigators, and that n should be closer to 3. The work of Wingardh (3) showed that the exponent of Z should be much lower, p = 2.95, however, this is much lower than that found by most investigators.

Structural Study of a new Compound Based on Acid 1,4-Cyclohexanedicarboxylic (1,4-CDC)

2010 ◽  
Vol 6 (1) ◽  
pp. 891-896
Author(s):  
Manel Halouani ◽  
M. Dammak ◽  
N. Audebrand ◽  
L. Ktari
Keyword(s):  
Aqueous Solution ◽  
Water Molecules ◽  
Carboxyl Group ◽  
X Ray Diffraction ◽  
Compound I ◽  
Unit Cell Parameters ◽  
Monoclinic System ◽  
X Ray ◽  
Cell Parameters ◽  
Cyclohexanedicarboxylic Acid

One nickel 1,4-cyclohexanedicarboxylate coordination polymers, Ni2 [(O10C6H4)(COO)2].2H2O  (I), was hydrothermally synthesized from an aqueous solution of Ni (NO3)2.6H2O, (1,4-CDC) (1,4-CDC = 1,4-cyclohexanedicarboxylic acid) and tetramethylammonium nitrate. Compound (I) crystallizes in the monoclinic system with the C2/m space group. The unit cell parameters are a = 20.1160 (16) Å, b = 9.9387 (10) Å, c = 6.3672 (6) Å, β = 97.007 (3) (°), V= 1263.5 (2) (Å3) and Dx= 1.751g/cm3. The refinement converged into R= 0.036 and RW = 0.092. The structure, determined by single crystal X-ray diffraction, consists of two nickel atoms Ni (1) and Ni (2). Lots of ways of which is surrounded by six oxygen atoms, a carboxyl group and two water molecules.

Heterogeneous Fenton Catalytic Removal of Organic Pollutant in Aqueous Solution by using Coal Gangue as a Catalyst

2019 ◽  
Vol 12 (4) ◽  
pp. 312-325
Author(s):  
Jiwei Zhang ◽  
Jingjing Xu ◽  
Shuaixia Liu ◽  
Baoxiang Gu ◽  
Feng Chen ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Hydrogen Peroxide ◽  
Hydroxyl Radical ◽  
Removal Rate ◽  
Organic Pollutant ◽  
Coal Gangue ◽  
Ion Leakage ◽  
Heterogeneous Fenton ◽  
Solution Ph ◽  
X Ray

Background: Coal gangue was used as a catalyst in heterogeneous Fenton process for the degradation of azo dye and phenol. The influencing factors, such as solution pH gangue concentration and hydrogen peroxide dosage were investigated, and the reaction mechanism between coal gangue and hydrogen peroxide was also discussed. Methods: Experimental results showed that coal gangue has the ability to activate hydrogen peroxide to degrade environmental pollutants in aqueous solution. Under optimal conditions, after 60 minutes of treatment, more than 90.57% of reactive red dye was removed, and the removal efficiency of Chemical Oxygen Demand (COD) up to 72.83%. Results: Both hydroxyl radical and superoxide radical anion participated in the degradation of organic pollutant but hydroxyl radical predominated. Stability tests for coal gangue were also carried out via the continuous degradation experiment and ion leakage analysis. After five times continuous degradation, dye removal rate decreased slightly and the leached Fe was still at very low level (2.24-3.02 mg L-1). The results of Scanning Electron Microscope (SEM), energy dispersive X-Ray Spectrometer (EDS) and X-Ray Powder Diffraction (XRD) indicated that coal gangue catalyst is stable after five times continuous reuse. Conclusion: The progress in this research suggested that coal gangue is a potential nature catalyst for the efficient degradation of organic pollutant in water and wastewater via the Fenton reaction.

Small angle X-ray scattering study of porosity variation in a styrene-divinylbenzene copolymer

1981 ◽  
Vol 46 (7) ◽  
pp. 1675-1681 ◽  
Author(s):  
Josef Baldrian ◽  
Božena N. Kolarz ◽  
Henrik Galina
Keyword(s):  
Small Angle ◽  
Structural Parameters ◽  
Two Phase ◽  
X Ray ◽  
Porosity Variation ◽  
Swelling Agent ◽  
X Ray Scattering ◽  
Styrene Divinylbenzene ◽  
Ray Scattering

Porosity variations induced by swelling agent exchange were studied in a styrene-divinylbenzene copolymer. Standard methods were used in the characterization of copolymer porosity in the dry state and the results were compared with related structural parameters derived from small angle X-ray scattering (SAXS) measurements as developed for the characterization of two-phase systems. The SAXS method was also used for porosity determination in swollen samples. The differences in the porosity of dry samples were found to be an effect of the drying process, while in the swollen state the sample swells and deswells isotropically.

Über den Mechanismus der Bildung von Polyanionen in wäßriger Lösung. Zum Bildungsmechanismus eines Polytetramolybdations [Mo4O144-]n / On the Mechanism of Formation of Polyanions in Aqueous Solution. Concerning the Mechanism of Formation of a Polytetramolybdate Ion [Mo4O144-]n

1976 ◽  
Vol 31 (6) ◽  
pp. 737-748 ◽  
Author(s):  
Karl-Heinz Tytko
Keyword(s):  
Aqueous Solution ◽  
Coordination Sphere ◽  
Analytical Formula ◽  
Reaction Pathways ◽  
Mechanism Of Formation ◽  
X Ray ◽  
Theoretical Considerations

Possible structures and the pertinent reaction pathways for the polymetalate ion present in a slightly soluble polymetalate having the analytical formula A2O · 2 MOs have been derived on the basis of theoretical considerations. Structure and kind of combination of the tetrameric units of one of the possibilities are in agreement with the results of X-ray structure analyses. First the previously proposed planar tetrametalate ion [M4O12(OH)4]4--is formed by stepwise aggregation according to an addition mechanism. This species undergoes a rearrangement of the coordination sphere of two of the M atoms and is then subject to a polycondensation resulting in a polytetrametalate chain, [M4O144-]n.

scholarly journals Removal of Phenol from Aqueous Solution Using Internal Microelectrolysis with Fe-Cu: Optimization and Application on Real Coking Wastewater

Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 720
Author(s):  
Do Tra Huong ◽  
Nguyen Van Tu ◽  
Duong Thi Tu Anh ◽  
Nguyen Anh Tien ◽  
Tran Thi Kim Ngan ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Reaction Rate Constant ◽  
Phenol Concentration ◽  
Treated Wastewater ◽  
Coking Wastewater ◽  
X Ray ◽  
Chemical Plating ◽  
Internal Electrolysis ◽  
Phenol Decomposition

Fe-Cu materials were synthesized using the chemical plating method from Fe powder and CuSO4 5% solution and then characterized for surface morphology, composition and structure by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The as-synthesized Fe-Cu material was used for removal of phenol from aqueous solution by internal microelectrolysis. The internal electrolysis-induced phenol decomposition was then studied with respect to various parameters such as pH, time, Fe-Cu material weight, phenol concentration and shaking speed. The optimal phenol decomposition (92.7%) was achieved under the conditions of (1) a pH value of phenol solution of 3, (2) 12 h of shaking at the speed of 200 rpm, (3) Fe-Cu material weight of 10 g/L, (4) initial phenol concentration of 100.98 mg/L and (5) at room temperature (25 ± 0.5 °C). The degradation of phenol using Fe-Cu materials obeyed the second-order apparent kinetics equation with a reaction rate constant of k of 0.009 h−1L mg−1. The optimal process was then tested against real coking wastewater samples, resulting in treated wastewater with favorable water indicators. Current findings justify the use of Fe-Cu materials in practical internal electrolysis processes.

scholarly journals Leaching Titaniferous Magnetite Concentrate by Alkaline Aqueous Solution

2021 ◽  
Author(s):  
Ke Guo ◽  
Shaoyan Wang ◽  
Renfeng Song ◽  
Zhiqiang Zhang
Keyword(s):  
Aqueous Solution ◽  
Alkali Concentration ◽  
Water Usage ◽  
X Ray Diffraction ◽  
High Concentration ◽  
X Ray ◽  
Iron Concentrate ◽  
Titaniferous Magnetite ◽  
Magnetite Concentrate ◽  
Kinetics Of

AbstractLeaching titaniferous magnetite concentrate with alkali solution of high concentration under high temperature and high pressure was utilized to improve the grade of iron in iron concentrate and the grade of TiO2 in titanium tailings. The titaniferous magnetite concentrate in use contained 12.67% TiO2 and 54.01% Fe. The thermodynamics of the possible reactions and the kinetics of leaching process were analyzed. It was found that decomposing FeTiO3 with NaOH aqueous solution could be carried out spontaneously and the reaction rate was mainly controlled by internal diffusion. The effects of water usage, alkali concentration, reaction time, and temperature on the leaching procedure were inspected, and the products were characterized by X-ray diffraction, scanning electron microscope, and energy dispersive spectroscopy, respectively. After NaOH leaching and magnetic separation, the concentrate, with Fe purity of 65.98% and Fe recovery of 82.46%, and the tailings, with TiO2 purity of 32.09% and TiO2 recovery of 80.79%, were obtained, respectively.

Sign in / Sign up

Export Citation Format

Share Document