Thermal performance enhancement in a wedge duct with in-line pin fins combined with vortex generators

2019 ◽  
Vol 29 (8) ◽  
pp. 2545-2565
Author(s):  
Safeer Hussain ◽  
Jian Liu ◽  
Lei Wang ◽  
Bengt Ake Sunden
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Thermal Performance ◽  
Performance Enhancement ◽  
Numerical Study ◽  
Vortex Generators ◽  
Content Type ◽  
Pin Fin ◽  
Pin Fins ◽  
Cooling Enhancement

Purpose The purpose of this paper is to enhance the heat transfer and thermal performance in the trailing edge region of the vane with vortex generators (VGs). Design/methodology/approach This numerical study presents the enhancement of thermal performance in the trailing part of a gas turbine blade. In the trailing part, generally, pin fins are used either in staggered or in-line arrangements to enhance the heat transfer. In this study, based on the idea from heat exchangers, pin fins are combined with VGs. A pair of VGs is embedded in the boundary layer upstream of each pin fin in the first row of the pin fin array having an in-line configuration. The effects of the VG angle relative to the streamwise direction and streamwise distance between the pin fin and VGs are investigated at various Reynolds numbers. Findings The results indicated that the endwall heat transfer is enhanced with the addition of VGs and the heat transfer from the surfaces of the pin fins. The level of heat transfer enhancement compared to the case without VGs is more significant at high Reynolds number. The surfaces of the VGs also show a significant amount of heat transfer. Study of the angle of the attack suggested that a high angle of attack is more appropriate for pin fin cooling enhancement whereas an intermediate gap between the VGs and pin fins shows considerable improvement of thermal performance compared to the small and large gaps. The phenomenon of heat transfer augmentation with the VGs is demonstrated by the flow field. It shows that the enhancement of heat transfer is governed by the mixing of the flow as a result of the interaction of vortices generated by the VGs and pin fins. Originality/value VGs are used to disturb the thermal boundary layer. It shows that heat transfer is augmented as a result of the interaction of vortices associated with VGs and pin fins.

Heat Transfer and Pressure Loss Characteristics of Pin-Fins With Different Shapes in a Wide Channel

2017 ◽  
Author(s):  
Jin Xu ◽  
Jiaxu Yao ◽  
Pengfei Su ◽  
Jiang Lei ◽  
Junmei Wu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Thermal Performance ◽  
Pressure Loss ◽  
Bottom Surface ◽  
Number Range ◽  
Pin Fin ◽  
Nominal Diameter ◽  
Pin Fins

Convective heat transfer enhancement and pressure loss characteristics in a wide rectangular channel (AR = 4) with staggered pin fin arrays are investigated experimentally. Six sets of pin fins with the same nominal diameter (Dn = 8mm) are tested, including: Circular, Elliptic, Oblong, Dropform, NACA and Lancet. The relative spanwise pitch (S/Dn = 2) and streamwise pitch (X/Dn = 4.5) are kept the same for all six sets. Same nominal diameter and arrangement guarantee the same blockage area in the channel for each set. Reynolds number based on channel hydraulic diameter is from 10000 to 70000 with an increment of 10000. Using thermochromic liquid crystal (R40C20W), heat transfer coefficients on bottom surface of the channel are achieved. The obtained friction factor, Nusselt number and overall thermal performance are compared with the previously published data from other groups. The averaged Nusselt number of Circular pin fins is the largest in these six pin fins under different Re. Though Elliptic has a moderate level of Nusselt number, its pressure loss is next to the lowest. Elliptic pin fins have pretty good overall thermal performance in the tested Reynolds number range. When Re>40000, Lancet has a same level of performance as Circular, but its pressure loss is much lower than Circular. These two types are both promising alternative configuration to Circular pin fin used in gas turbine blade.

Comparison of Pin Surface Heat Transfer in Arrays of Oblong and Cylindrical Pin Fins

2013 ◽  
Vol 136 (4) ◽  
Author(s):  
Kathryn L. Kirsch ◽  
Jason K. Ostanek ◽  
Karen A. Thole
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Boundary Layer Separation ◽  
Diameter Ratio ◽  
Pin Fin ◽  
The Third ◽  
Spacing Effects ◽  
Pin Fins ◽  
Turbine Airfoils ◽  
Pin Fin Arrays

Pin fin arrays are most commonly used to promote convective cooling within the internal passages of gas turbine airfoils. Contributing to the heat transfer are the surfaces of the channel walls as well as the pin itself. Generally the pin fin cross section is circular; however, certain applications benefit from using other shapes such as oblong pin fins. The current study focuses on characterizing the heat transfer distribution on the surface of oblong pin fins with a particular focus on pin spacing effects. Comparisons were made with circular cylindrical pin fins, where both oblong and circular cylindrical pins had a height-to-diameter ratio of unity, with both streamwise and spanwise spacing varying between two and three diameters. To determine the effect of relative pin placement, measurements were taken in the first of a single row and in the third row of a multirow array. Results showed that area-averaged heat transfer on the pin surface was between 30 and 35% lower for oblong pins in comparison to cylindrical. While heat transfer on the circular cylindrical pin experienced one minimum prior to boundary layer separation, heat transfer on the oblong pin fins experienced two minimums, where one is located before the boundary layer transitions to a turbulent boundary layer and the other prior to separation at the trailing edge.

Experimental and Numerical Study on the Convective Heat Transfer and Pressure Loss in Rectangular Ducts With Inclined Pin-Fin on a Wavy Endwall

2012 ◽  
Author(s):  
K. Takeishi ◽  
Y. Oda ◽  
Y. Miyake ◽  
Y. Motoda
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Pressure Loss ◽  
Numerical Study ◽  
Average Heat Transfer Coefficient ◽  
Average Heat ◽  
Pin Fin ◽  
Pin Fins

Local endwall heat transfer characteristics and overall pressure loss of normal and inclined pin fins arrayed in rectangular ducts with flat and wavy endwalls have been investigated to improve the cooling efficiency of jet engine combustor liners. The detailed time-mean local Nusselt number profiles were measured using a naphthalene sublimation method based on the heat/mass transfer analogy. Four kinds of angled pin fins (−45, 0, and +45 degrees with a flat endwall, and −45 degrees with a wavy endwall) were tested and compared with each other. As a result, the average heat transfer coefficient on the flat endwall of normal pin fins was higher than that of the angled pin fins. The average heat transfer coefficient of −45-degree inclined pin fins with a wavy endwall is the same or a little higher than the heat transfer coefficient of those with a flat endwall; however, the pressure loss of the −45-degree inclined pin fins with a wavy endwall is less than the pressure loss of those with a flat endwall. Corresponding numerical simulations using Large Eddy Simulation (LES) with the Mixed Time Scale (MTS) model have been also conducted at Red = 1000 for fully developed regions, and the results have shown good quantitative agreement with mass transfer experiments. It can be concluded that wavy endwalls can realize better heat transfer with less pressure loss as long as the aim consists in enhancing endwall heat transfer in inclined pin-fin channels.

Influence of Rib Turbulators on Pin-Fin Heat Transfer in the Trailing Region of Gas Turbine Vane: A Numerical Study

2006 ◽  
Author(s):  
N. Kulasekharan ◽  
B. V. S. S. S. Prasad
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Numerical Study ◽  
Pressure Ratio ◽  
Constant Heat Flux ◽  
Transfer Coefficients ◽  
Flux Boundary Condition ◽  
Pin Fin ◽  
Pin Fins ◽  
Rib Turbulators

A numerical investigation is carried out for estimating the influence of rib turbulators on heat transfer and pressure drop of staggered non-uniform pin-fin arrays of different shapes, in a simulated cambered vane trailing region. Pin-fins of square, circular and the diamond shapes, each of two sizes (d) were chosen. The ratio of span-wise pitch to longitudinal pitch is 1.06 and that to the pin size are 4.25 and 3.03, for all pin shapes. A constant heat flux boundary condition is assumed over the coolant channel walls, rib surfaces and circumferential faces of the pin-fins. Reynolds number is varied (20,000<ReD<40,000) by changing the coolant outlet to inlet pressure ratio. Pin end-wall and pin surface averaged heat transfer coefficients and Nusselt numbers are estimated and detailed contours of heat transfer coefficient on both the pressure and suction surfaces are presented. Whilst there is an enhancement in heat transfer and pressure drop with ribs for all the pin shapes, diamond pins have shown the highest enhancement values for both ribbed and non-ribbed configuration.

Cooling effectiveness of matrix, pin fin array and hybrid structure: A comparative study

2020 ◽  
pp. 095441002096540
Author(s):  
Lianfeng Yang ◽  
Yigang Luan ◽  
Shi Bu ◽  
Haiou Sun ◽  
Franco Magagnato
Keyword(s):  
Heat Transfer ◽  
Comparative Study ◽  
Thermal Performance ◽  
Gas Turbines ◽  
Pressure Loss ◽  
Hybrid Structure ◽  
Hybrid Structures ◽  
Pin Fin ◽  
Pin Fins ◽  
Pin Fin Array

In modern gas turbines, the trailing edge of turbine blades must be cooled by compact heat transfer structures. The basic problems in the design of cooling ducts include enhancing heat transfer, reducing pressure loss and obtaining uniform temperature distribution. The purpose is to improve energy efficiency and guarantee the engine lifespan. In this work, both experiment and numerical simulation are employed to study pressure drop and heat transfer of various kinds of cooling configurations. Pin fin array, matrix and hybrid structures are investigated in a comparative study. Thermochromic liquid crystal technique is applied to obtain heat transfer distribution on the channel surface. The results show that matrix creates much stronger heat transfer than pin fin array with increased pressure loss penalty. Performances of matrix structures are quite different due to the configurations (dense or sparse). Hybrid structures are always worse than the baseline matrix in terms of average thermal performance, due to the higher pressure loss, however, heat transfer can be improved. The performance of hybrid structure depends on the arrangement and diameter of the pin fins. Pin fins in central area provide not only larger pressure loss but also stronger heat transfer than pin fins near the bend region. Cases with larger diameter result in the thermal performance degradation. Compared with sparse matrix, the hybrid structures can compensate for the lower heat transfer enhancement. As for the dense hybrid structures, the average heat transfer capacity can be improved with reasonable pin fin arrangement.

Comparison of Pin Surface Heat Transfer in Arrays of Oblong and Cylindrical Pin Fins

2013 ◽  
Author(s):  
Kathryn L. Kirsch ◽  
Jason K. Ostanek ◽  
Karen A. Thole
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Boundary Layer Separation ◽  
Diameter Ratio ◽  
Pin Fin ◽  
The Third ◽  
Spacing Effects ◽  
Pin Fins ◽  
Turbine Airfoils ◽  
Pin Fin Arrays

Pin fin arrays are most commonly used to promote convective cooling within the internal passages of gas turbine airfoils. Contributing to the heat transfer are the surfaces of the channel walls as well as the pin itself. Generally the pin fin cross-section is circular; however, certain applications benefit from using other shapes such as oblong pin fins. The current study focuses on characterizing the heat transfer distribution on the surface of oblong pin fins with a particular focus on pin spacing effects. Comparisons were made with circular cylindrical pin fins, where both oblong and circular cylindrical pins had a height-to-diameter ratio of unity, with both streamwise and spanwise spacing varying between two and three diameters. To determine the effect of relative pin placement, measurements were taken in the first of a single row and in the third row of a multi-row array. Results showed that area-averaged heat transfer on the pin surface was between 30 and 35 percent lower for oblong pins in comparison to cylindrical. While heat transfer on the circular cylindrical pin experienced one minimum prior to boundary layer separation, heat transfer on the oblong pin-fins experienced two minimums, where one is located before the boundary layer transitions to a turbulent boundary layer and the other prior to separation at the trailing edge.

Flow and Heat Transfer From the Annular Fin Heat Exchanger Using Winglet Type Vortex Generators

2013 ◽  
Author(s):  
Basanta Kumar Rana ◽  
Amaresh Dalal ◽  
Gautam Biswas
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Heat Exchanger ◽  
Thermal Boundary Layer ◽  
Numerical Study ◽  
Three Dimensional ◽  
Vortex Generators ◽  
Flow And Heat Transfer ◽  
Finned Tube Heat Exchanger ◽  
Annular Fin

A numerical study of three-dimensional flow and heat transfer from the annular finned tube heat exchanger with built-in delta winglets is carried out. The delta winglets type vortex generators which are placed on the annular fin surface in the neighborhood of the cylinder are used to enhance the heat transfer. The winglets are placed in common flow orientation. Longitudinal vortices develop along the side edge of the delta winglets due to the pressure difference between the front surface (facing the flow) and back surface. These vortices interact with thermal boundary layer and produce a three dimensional swirling flow that mixes near wall fluid with the midstream. Thus the thermal boundary layer is disrupted and heat transfer is enhanced. The investigations are carried out for four different Reynolds number (100, 500 and 1000) and four different angles of attack (35°, 40°, 45°, 50°) for common flow up (CFU) configuration. It is found that heat transfer increases about 11% for Re = 1000 with angle of attack 40°.

Numerical Study on Flow and Heat Transfer Characteristics of Pin-Fins With Different Shapes

2019 ◽  
Author(s):  
Wei Jin ◽  
Ning Jia ◽  
Junmei Wu ◽  
Jiang Lei ◽  
Lin Liu
Keyword(s):  
Heat Transfer ◽  
Friction Factor ◽  
Numerical Study ◽  
Heated Surface ◽  
Transfer Effect ◽  
Enhancement Effect ◽  
Trailing Edge ◽  
Pin Fin ◽  
Flow And Heat Transfer ◽  
Pin Fins

Abstract Equipping pin-fins in the blade trailing edge is an significant method for enhancing heat transfer. In order to obtain a geometry of pin-fins with good heat transfer effect and small friction factor, six pin-fins (circular, elliptic, oblong, teardrop, lancet and NACA) are selected. The flow and heat transfer features of the rectangular channel with the staggered pin-fins were numerically studied through FLUENT software. The channels with different pin-fins have the same relative spanwise pitch (S/D = 2.5) and streamwise pitch (X/D = 2.5), and the range of Reynolds number is 5×103 to 3×104. The applicability and accuracy of five turbulence models (Standard k-ε, Realizable k-ε, RNG k-ε, Standard k-ω and SST k-ω) are checked by comparing the numerically predicted results with the experimental from literature. It is found that the Realizable k-ε model is better at capturing the microstructure of flow field and has higher precision in predicting the averaged Nusselt number on the heated surface. For the six pin-fins, the leading edge is surrounded by a “U-shaped” strong heat exchange zone, but the vortex systems in the trailing edge are different from each other. Compared to the circular pin-fin, the oblong pin-fin has the best heat transfer enhancement effect, but the friction factor of channel is also larger. While the NACA pin-fin has the lowest friction factor, and the heat transfer effect is second only to the oblong. NACA pin-fin may be applied in blade trailing edge cooling by further optimizing the relative position of the pin-fins in the channel.

An Experimental Study of Transitional Flow Friction and Heat Transfer Performance of a Channel With Staggered Arrays of Mini-Scale Short Pin Fins

2009 ◽  
Author(s):  
Yu Rao ◽  
Chaoyi Wan ◽  
Shusheng Zang
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Reynolds Number ◽  
Thermal Performance ◽  
Heat Transfer Performance ◽  
Diameter Ratio ◽  
Transitional Flow ◽  
Transfer Performance ◽  
Pin Fin ◽  
Pin Fins

An experimental study was conducted to investigate the friction and heat transfer performance of air transitional flow in a rectangular channel with staggered arrays of short pin fins with transverse spacing-to-diameter of 1.5 and streamwise spacing-to-diameter ratio of 2.5. The friction factor, averaged Nusselt number and the overall thermal performance of the transitional flow have been obtained, and compared with Metzger’s pin fin channel with transverse spacing-to-diameter of 2.5 and streamwise spacing-to-diameter ratio of 2.5. The experimental study has showed that in the Reynolds number range of 1678–8500, the pin fin channel with transverse spacing-to-diameter of 1.5 has a higher convective heat transfer performance, but the enhancement capability decreases with the Reynolds number. For Re <6000, the overall thermal performance of the pin fin channel with transverse spacing-to-diameter of 1.5 is higher than the pin fin channel transverse spacing-to-diameter of 2.5, however for Re >6000 the overall thermal performance of the former is lower than the latter. For both of the pin fin channels, the overall thermal performance gets highest when the flow transition occurs.

Numerical Study on Heat Transfer Characteristics in Rectangular Ducts With Pin-Fins

2011 ◽  
Author(s):  
Xinjun Wang ◽  
Xiaowei Bai ◽  
Jiangbo Wu ◽  
Rui Liu ◽  
Ding Zhu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Numerical Study ◽  
Flow Direction ◽  
Three Dimensional ◽  
Heat Transfer Characteristics ◽  
Pin Fin ◽  
Transfer Characteristics ◽  
Pin Fins

By using the CFX software, three-dimensional flow and heat transfer characteristics in rectangular cooling ducts with in-line and staggered array pin-fins of gas turbine blade trailing edge were numerically simulated. The effects of in-line and staggered arrays of pin-fins, flow Reynolds number as well as density of cylindrical pin-fins in flow direction on heat transfer characteristics were analyzed. Both in the cases of in-line and staggered arrays of pin-fins, the results show that the pin-fin surface averaged Nusselt number increases with the increasing of Reynolds number. In the case of the same Reynolds number, the mean Nusselt number of pin-fin surface decreased with the increasing of X/D (the ratio of streamwise pin-pitch to pin-fin diameter) value. The Nusselt number increases gradually before the first pin-fin row and then reached the fully developed value at fourth or fifth row. The pin-fin Nusselt number at flow direction is larger than that at back flow direction. Along the height direction of pin-fin, the Nusselt number in middle area is larger.

Sign in / Sign up

Export Citation Format

Share Document