Analysis of dynamic characteristics of spiral groove liquid film seal under thermal–fluid–solid coupling

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bo Yu ◽  
Muming Hao ◽  
Sun Xinhui ◽  
Zengli Wang ◽  
Liu Fuyu ◽  
...  
Keyword(s):  
Steady State ◽  
Liquid Film ◽  
Dynamic Characteristics ◽  
Dynamic Stiffness ◽  
Dynamic Performance ◽  
Analysis Model ◽  
Spiral Groove ◽  
Content Type ◽  
Sealing Performance ◽  
Stiffness And Damping

Purpose The purpose of this paper is to investigate the dynamic characteristics of spiral groove liquid film seal under the effect of thermal–fluid–solid coupling. Design/methodology/approach The dynamic analysis model of spiral groove liquid film seal under the effect of thermal–fluid–solid coupling was established by perturbation method. The steady-state and perturbation Reynolds equations were solved, and the steady-state sealing performance and dynamic characteristic coefficients of the liquid film were obtained. Findings Compared with the liquid film without coupling method, a divergent seal gap is formed between the seal rings under the effect of thermal–fluid–solid coupling, the minimum liquid film thickness decreases, the dynamic stiffness and damping coefficients of the liquid film are increased and the thermoelastic deformation of the end-face improves the dynamic performance of the liquid film seal. Originality/value The dynamic characteristics of the spiral groove liquid film seal under the effect of thermal–fluid–solid coupling are studied, which provides a theoretical reference for optimizing the dynamic performance of the non-contacting liquid film seal.

scholarly journals Influence of Floating Ring Seal Working Condition Parameters on the Dynamic Characteristics of Transient Gas Film

2021 ◽  
Vol 2108 (1) ◽  
pp. 012087
Author(s):  
Lishan Xu ◽  
Weizheng Zhang ◽  
Junjie Lu ◽  
Zhu Liu
Keyword(s):  
Film Thickness ◽  
High Speed ◽  
Dynamic Stiffness ◽  
Dynamic Performance ◽  
Spiral Groove ◽  
Low Leakage ◽  
Ring Seal ◽  
Stiffness And Damping Coefficient ◽  
Small Perturbation Method ◽  
Stiffness And Damping

Abstract The high requirements for sealing performance in high-speed rotating machinery has led to the design of floating seal with annular spiral groove that offer the advantages of low leakage and extended stability. However, efforts to model the dynamic performance of these floating seal have suffered from the great complexity of the flow field. The present work addresses this issue by establishing a transient Reynolds formulation of a floating seal with annular spiral groove in a rotating coordinate system based on the small perturbation method. In addition, the influence of radial eccentricity and film thickness on the solution divergence and calculation accuracy is calculated. The dynamic stiffness and dynamic damping matrixes are built. Then the variation rules of the dynamic stiffness and damping coefficient of the gas film with structure and working conditions are investigated in detail. The results show that the floating ring seal is more suitable for the service conditions of small film thickness, low pressure, high speed and large eccentricity. Accordingly, the results obtained lay a theoretical foundation for evaluating real-world applications of floating ring seal.

A Comparison of the Steady-State and Dynamic Performance of First- and Second-Generation Foil Bearings

2010 ◽  
Author(s):  
M. J. Conlon ◽  
A. Dadouche ◽  
W. M. Dmochowski ◽  
R. Payette ◽  
J.-P. Be´dard
Keyword(s):  
Steady State ◽  
Experimental Evaluation ◽  
First Generation ◽  
Second Generation ◽  
Load Capacity ◽  
Dynamic Stiffness ◽  
Dynamic Performance ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Stiffness And Damping

Oil-free foil bearing technology has advanced intermittently over the years, driven by research efforts to improve both steady-state and dynamic performance characteristics, namely: load capacity, stiffness, and damping. Bearing designs are thus classified according to “generation”, with first-generation bearings being the most primitive. This paper presents an experimental evaluation of a first- and a second-generation foil bearing, and aims to provide the high-fidelity data necessary for proper validation of theoretical predictive models of foil bearing performance. The aforementioned test bearings were fabricated in-house, and are both 70mm in diameter with an aspect ratio of 1; bearing manufacturing details are provided. The work makes use of a facility dedicated to measuring both the steady-state and dynamic properties of foil bearings under a variety of controlled operating conditions. The bearing under test is placed at the midspan of a horizontal, simply-supported, stepped shaft which rotates at up to 60krpm. Static and dynamic loads of up to 3500N and 450N (respectively) can be applied by means of a pneumatic cylinder and two electrodynamic shakers. The bearings’ structural (static) stiffnesses are highly nonlinear, and this affects the accuracy of the dynamic coefficient determination. Both dynamic stiffness and damping are found to vary nonlinearly with excitation frequency, and are over-predicted by a structural experimental evaluation — the film plays an important role in bearing dynamics. The second-generation bearing is found to have a higher load capacity, dynamic stiffness, and damping than the first-generation bearing.

Dynamic characteristics of exponential slider bearings lubricated with a ferrofluid – Shliomis model

2018 ◽  
Vol 70 (4) ◽  
pp. 673-679
Author(s):  
Jaw-Ren Lin ◽  
Li-Ming Chu
Keyword(s):  
Dynamic Characteristics ◽  
Volume Concentration ◽  
Dynamic Stiffness ◽  
Transverse Magnetic ◽  
Slider Bearing ◽  
Content Type ◽  
Concentration Parameter ◽  
Slider Bearings ◽  
Modern Engineering ◽  
Stiffness And Damping

Purpose The purpose of this paper is to investigate the dynamic characteristics of exponential slider bearings lubricated with a ferrofluid. Because of the development of modern engineering, the increasing use of ferrofluids in lubrication fields has shown great importance. Understanding the dynamic characteristics of exponential film bearings is helpful for engineers in bearing selection. Design/methodology/approach Applying the Shliomis ferrohydrodynamic flow model and considering the squeezing action of bearing pads, a dynamic Reynolds equation is obtained for an exponential film slider bearing lubricated with a ferrofluid in the presence of a transverse magnetic field. Analytical solutions of dynamic characteristics are obtained. Findings According to the results, the ferrofluid-lubricated exponential film bearing provides better dynamic stiffness and damping characteristics than the non-ferrofluid ones, especially the bearing operating at higher values of the volume concentration parameter and the magnetic Langevin parameter. Originality/value Numerical tables of stiffness and damping coefficients for different values of the volume concentration parameter and the Langevin parameter are also included for engineering references.

Analysis of dynamic characteristics of spiral groove liquid film seal considering cavitation

2018 ◽  
Vol 70 (9) ◽  
pp. 1619-1629 ◽  
Author(s):  
Mu-ming Hao ◽  
Wen-jing Yang ◽  
Heng-chao Cao ◽  
Lu-shuai Xu ◽  
Yun-lei Wang ◽  
...  
Keyword(s):  
Liquid Film ◽  
Dynamic Characteristics ◽  
Design Method ◽  
Mechanical Seals ◽  
The Finite Element Method ◽  
Spiral Groove ◽  
Film Rupture ◽  
Content Type ◽  
Infinitesimal Perturbation ◽  
The Difference

Purpose The purpose of this paper is to investigate the dynamic characteristics of a spiral groove liquid film seal considering the effect of cavitation. Design/methodology/approach A mathematical model of a spiral groove liquid film seal was established based on the mass-conserving Jakobsson–Floberg–Olsson cavitation boundary condition. The film rupture and film reformation boundaries were assumed to be unchanged under infinitesimal perturbation conditions. Governing equations under steady and perturbed states were solved by the finite element method, and then the dynamic characteristics of the spiral groove liquid film seal were theoretically investigated considering the effect of cavitation. Findings The results indicate that dynamic coefficients considering cavitation are smaller than those neglecting cavitation. The difference value is consistent with the change in cavitation area. The liquid film seal does not suffer axial instability whether considering cavitation, but its angular instability is more likely to occur when cavitation is considered. Originality/value For liquid lubricated non-contacting mechanical seals, the dynamic characteristics considering cavitation are investigated. The results are expected to provide a theoretical basis for improving the design method of liquid film seals.

Design and structural performance measurements of a novel multi-cantilever foil bearing

2014 ◽  
Vol 229 (10) ◽  
pp. 1830-1838 ◽  
Author(s):  
Kai Feng ◽  
Xueyuan Zhao ◽  
Zhiyang Guo
Keyword(s):  
Dynamic Characteristics ◽  
Dynamic Load ◽  
Dynamic Stiffness ◽  
Excitation Frequency ◽  
Viscous Damping ◽  
Equivalent Viscous Damping ◽  
Foil Bearing ◽  
Load Tests ◽  
Stiffness And Damping ◽  
Motion Amplitude

With increasing need for high-speed, high-temperature, and oil-free turbomachinery, gas foil bearings (GFBs) have been considered to be the best substitutes for traditional oil-lubricated bearings. A multi-cantilever foil bearing (MCFB), a novel GFB with multi-cantilever foil strips serving as the compliant underlying structure, was designed, fabricated, and tested. A series of static and dynamic load tests were conducted to measure the structural stiffness and equivalent viscous damping of the prototype MCFB. Experiments of static load versus deflection showed that the proposed bearing has a large mechanical energy dissipation capability and a pronounced nonlinear static stiffness that can prevents overly large motion amplitude of journal. Dynamic load tests evaluated the influence of motion amplitude, loading orientation and misalignment on the dynamic stiffness and equivalent viscous damping with respect to excitation frequency. The test results demonstrated that the dynamic stiffness and damping are strongly dependent on the excitation frequency. Three motion amplitudes were applied to the bearing housing to investigate the effects of motion amplitude on the dynamic characteristics. It is noted that the bearing dynamic stiffness and damping decreases with incrementally increasing motion amplitudes. A high level of misalignment can lead to larger static and dynamic bearing stiffness as well as to larger equivalent viscous damping. With dynamic loads applied to two orientations in the bearing midplane separately, the dynamic stiffness increases rapidly and the equivalent viscous damping declines slightly. These results indicate that the loading orientation is a non-negligible factor on the dynamic characteristics of MCFBs.

The Surface Roughness Effect on the Dynamic Stiffness and Damping Characteristics of the Hydrostatic Thrust Spherical Bearings: Part 5 of 5 — Clearance Type of Bearings

2007 ◽  
Author(s):  
Ahmad W. Yacout
Keyword(s):  
Surface Roughness ◽  
Capillary Tube ◽  
Dynamic Stiffness ◽  
Dynamic Performance ◽  
Major Effect ◽  
Design Parameters ◽  
Compressibility Effect ◽  
Damping Coefficients ◽  
Stiffness And Damping ◽  
Fluid Compressibility

This study has theoretically analyzed the surface roughness, centripetal inertia and recess volume fluid compressibility effects on the dynamic behavior of a restrictor compensated hydrostatic thrust spherical clearance type of bearing. The stochastic Reynolds equation, with centripetal inertia effect, and the recess flow continuity equation with recess volume fluid compressibility effect have been derived to take into account the presence of roughness on the bearing surfaces. On the basis of a small perturbations method, the dynamic stiffness and damping coefficients have been evaluated. In addition to the usual bearing design parameters the results for the dynamic stiffness and damping coefficients have been calculated for various frequencies of vibrations or squeeze parameter (frequency parameter) and recess volume fluid compressibility parameter. The study shows that both of the surface roughness and the centripetal inertia have slight effects on the stiffness coefficient and remarkable effects on the damping coefficient while the recess volume fluid compressibility parameter has the major effect on the bearing dynamic characteristics. The cross dynamic stiffness showed the bearing self-aligning property and the ability to oppose whirl movements. The orifice restrictor showed better dynamic performance than that of the capillary tube.

Numerical analysis of the dynamic performance of aerostatic thrust bearings with different restrictors

2018 ◽  
Vol 233 (3) ◽  
pp. 406-423 ◽  
Author(s):  
Hailong Cui ◽  
Yang Wang ◽  
Xiaobin Yue ◽  
Yifei Li ◽  
Zhengyi Jiang
Keyword(s):  
Load Capacity ◽  
Dynamic Stiffness ◽  
Dynamic Performance ◽  
Dynamic Mesh ◽  
Eccentricity Ratio ◽  
Thrust Bearings ◽  
Stiffness And Damping Coefficient ◽  
Stiffness And Damping ◽  
The Impact ◽  
The Relationship

This study utilizes a dynamic mesh technology to investigate the dynamic performance of aerostatic thrust bearings with orifice restrictor, multiple restrictors, and porous restrictor. An experiment, which investigates the bearing static load capacity, was carried out to verify the calculation accuracy of dynamic mesh technology. Further, the impact of incentive amplitude, incentive frequency, axial eccentricity ratio, and non-flatness on the bearing dynamic performance was also studied. The results show incentive amplitude effect can be ignored at the condition of amplitude less than 5% film thickness, while the relationship between dynamic characteristics and incentive frequency presented a strong nonlinear relationship in the whole frequency range. The change law of dynamic stiffness and damping coefficient for porous restrictor was quite different from orifice restrictor and multiple restrictors. The bearing dynamic performance increased significantly with the growth of axial eccentricity ratio, and the surface non-flatness enhanced dynamic performance of aerostatic thrust bearings.

A Variable Viscosity Approach for the Analysis of Steady State and Dynamic Characteristics of Two-Lobe Journal Bearing With TiO2 Based Nanolubricant

2017 ◽  
Author(s):  
Ashutosh Kumar ◽  
Sashindra Kumar Kakoty
Keyword(s):  
Steady State ◽  
Dynamic Characteristics ◽  
Journal Bearing ◽  
Volume Fraction ◽  
Variable Viscosity ◽  
Flow Coefficient ◽  
Viscosity Model ◽  
Nano Lubricant ◽  
The Stability ◽  
Stiffness And Damping

Steady-state and dynamic characteristics of two-lobe journal bearing, operating on TiO2 based Nano-lubricant has been obtained. The effective viscosity is obtained by using Krieger-Dougherty viscosity model for a given volume fraction of nanoparticle in the base fluid. Various bearing performance characteristics are then obtained by solving modified Reynolds equation for variable viscosity model and couple stress model. The stiffness and damping coefficients are also determined for various values of the volume fraction of the nanoparticle in the nanofluid. Results reveal that load carrying capacity and flow coefficient increase whereas friction variable decreases without affecting the stability condition of two-lobe journal bearing operating on TiO2 based nanolubricant. On the other hand attitude angle and dynamic coefficients remains constant for all the values of volume fraction of nanoparticle.

The influence of 3-DOF film thickness disturbance on transient performance of typical spiral groove dry gas seals

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yuan Chen ◽  
Hao Shang ◽  
Xiaolu Li ◽  
Yuntang Li ◽  
Bingqing Wang ◽  
...  
Keyword(s):  
Film Thickness ◽  
Degrees Of Freedom ◽  
Thickness Distribution ◽  
Transient Performance ◽  
Spiral Groove ◽  
Double Row ◽  
Content Type ◽  
Dry Gas Seal ◽  
Sealing Performance ◽  
Gas Seals

Purpose The purpose of this paper is to investigate the influence rule and mechanism of three degrees of freedom film thickness disturbance on the transient performance of spiral groove, upstream pumping spiral groove dry gas seal (UP-SDGS) and double-row spiral groove dry gas seal (DR-SDGS). Design/methodology/approach The transient performance of spiral groove, UP-SDGS and DR-SDGS are obtained by solving the transient Reynolds equation under different axial and angular disturbance coefficients. The transient and steady performance of the above-mentioned DGSs are compared and analyzed. Findings The film thickness disturbance has a remarkable impact on the sealing performance of DGS with different structures and the calculation deviations of the leakage rate of the UP-DGS will increase significantly if the film thickness disturbance is ignored. The axial and angular disturbance jointly affect the film thickness distribution of DGS, but there is no significant interaction between them on the transient sealing performance. Originality/value The influence mechanism of axial disturbance and angular disturbance on the transient performance of typical SDGSs behavior has been explained by theory. Considering small and large disturbance, the interaction between axial disturbance and angular disturbance on the transient performance have been studied.

Dynamic Characteristics Analysis of Axle Box Spring by FEM

2013 ◽  
Vol 712-715 ◽  
pp. 1535-1540
Author(s):  
Li Liu ◽  
Wei Hua Zhang ◽  
Dong Li Song
Keyword(s):  
Dynamic Characteristics ◽  
Dynamic Stiffness ◽  
Dynamic Performance ◽  
Excitation Frequency ◽  
Railway Vehicle ◽  
Helical Spring ◽  
Working Stress ◽  
Characteristics Analysis ◽  
In Series ◽  
Spring Method

Axle box spring of railway vehicle is the structure of helical spring in series with rubber pad to reduce working stress of helical spring and absorb high-frequency vibration. Rubber pad model was built. Static and dynamic characteristics were researched in axial and radial directions. The results show that the static stiffness of rubber pad decreases with the increase of radial displacement and increases distinctly with the increase of the amount of compression; The dynamic stiffness of rubber pad increases with the decrease of the excitation force in the case of the same excitation frequency and decreases with the decrease of the frequency in the case of the same excitation displacement. Axle box spring method was established and the amplitude-frequency curve of dynamic stiffness of the spring was presented. The results provide a theoretical basis to research the dynamic performance of railway vehicle.

Sign in / Sign up

Export Citation Format

Share Document