Synthesis of water-based cationic polyacrylate copolymer emulsion by RAFT polymerization and its application as an inkjet printing agent

2020 ◽  
Vol 49 (5) ◽  
pp. 401-408
Author(s):  
Haojia Su ◽  
Zhengchun Cai ◽  
Zhengwei lv ◽  
Yongkang Chen ◽  
Yongxin Ji
Keyword(s):  
Contact Angle ◽  
Particle Size ◽  
Epoxy Resin ◽  
Water Contact Angle ◽  
Inkjet Printing ◽  
Raft Polymerization ◽  
Printing Industry ◽  
Water Contact ◽  
Content Type ◽  
Ethyl Methacrylate

Purpose In this work, the authors used reversible addition-fragmentation transfer (RAFT) polymerization to develop a new cationic acrylate modified epoxy resin emulsion for water-borne inkjet which have the advantages of both polyacrylate and epoxy resin. The emulsion was successfully used in the canvas coating for inkjet printing. This paper aims to contribute to the development of novel cationic emulsions for inkjet printing industry. Design/methodology/approach In this work, the epoxy acrylate was synthesized from RAFT agent and epoxy resin firstly. Cationic macromolecular emulsifier was prepared by RAFT polymerization, using 2,2’-Azobisisobutyronitrile as initiator, 2-(dimethylamino)ethyl methacrylate and styrene as monomer, which was directly used to prepare the emulsion. The influences of the amount of 2-(dimethylamino)ethyl methacrylate on particle size, zeta potential and water contact angle were studied. Finally, the cationic emulsion was used to print images by inkjet printing. Findings The emulsion has the smallest particle size, the highest potential and the highest water contact angle when the DM content is 13 Wt.%. The transmission electron microscopy analysis reveals the latex particles is core-shell sphere with the diameters in the range 120–200 nm. The emulsion was successfully used in the canvas coating for inkjet printing. This work will contribute to the development of novel cationic emulsions for inkjet printing industry. Originality/value The emulsion was successfully used in the canvas coating for inkjet printing. This work will contribute to the development of novel cationic emulsions for inkjet printing industry.

Colloidal characteristics of gelatin-treated clay: Intercalation, stability, wettability, and rheological properties

2021 ◽  
Vol 29 (9_suppl) ◽  
pp. S1361-S1370
Author(s):  
Xuwu Luo ◽  
Guancheng Jiang ◽  
Xinliang Li ◽  
Lili Yang
Keyword(s):  
Contact Angle ◽  
Particle Size ◽  
Rheological Properties ◽  
Water Contact Angle ◽  
X Ray Diffraction ◽  
Sem Images ◽  
Water Contact ◽  
Ζ Potential ◽  
And Behavior ◽  
Clay Intercalation

In this paper, sodium montmorillonite was modified with gelatin of different concentrations, and various colloidal characteristics of the gelatin-treated clays were measured and analyzed in detail. First, the influence of gelatin on the interlayer space of Mt layers was investigated by X-ray diffraction analysis. Moreover, the aggregation of Mt particles was examined using a combination of electron microscopy and particle size distribution experiments, while the variation of the electrical property of Mt was measured using ζ potential test. Gelatin of different concentrations can increase the particle size of Mt in different degrees. The addition of 4% gelatin could improve the ζ potential of Mt from −30.65 to −15.55 mV. The wettability change of modified Mt induced by the adsorption of gelatin was followed by measurements of water contact angle and observations of the morphology of Mt/gelatin membrane through SEM images. 4% gelatin could improve the water contact angle of Mt to 81.3°. Finally, the rheological properties of Mt/gelatin dispersion including shear viscosity and shear stress were measured using a stress-controlled rheometer. All of the results were consistent by showing that the overall colloidal characteristics and behavior of the gelatin-treated Mt strongly varied depending on the gelatin concentration used in the modification process. These results can provide a deep and comprehensive understanding of the colloidal properties of clay/gelatin systems and give important guidance for the performance design and improvement of Mt/gelatin composite materials. Furthermore, this study can also be expanded the application of gelatin and its composites to other fields.

Towards superhydrophobic and ultraviolet protective nylon fabrics

2017 ◽  
Vol 29 (5) ◽  
pp. 696-705 ◽  
Author(s):  
Mangesh Teli ◽  
Bhagyashri N. Annaldewar
Keyword(s):  
Contact Angle ◽  
Copper Oxide ◽  
Water Contact Angle ◽  
Sodium Stearate ◽  
Uv Protection ◽  
Water Contact ◽  
Protective Properties ◽  
Content Type ◽  
Nylon Fabric ◽  
Uv Protective Properties

Purpose The purpose of this paper is to prepare coloured superhydrophobic and ultraviolet (UV) protective nylon fabrics using nanosilica copper oxide coating. Design/methodology/approach In this study, brown coloured superhydrophobic nylon fabric exhibiting UV protective properties was prepared by step-wise deposition of silica nanoparticles, copper oxide and sodium stearate. The hydrophobicity of treated fabrics was characterised by water contact angle measurement and UV protection properties of fabric were assessed by Australian/New Zealand Standard. Also, a colouring effect of treatment on nylon fabric was measured using spectrophotometer. Findings The modified fabric not only exhibited superhydrophobicity with the water contact angle of 150.6°, but also rendered excellent protection against UV radiation. The fabric showed retention of hydrophobic and UV protection properties up to 20 washing cycles. Originality/value A novel method for imparting superhydrophobicity and UV protective properties along with colouration effect on nylon fabrics has been reported. This type of fabric has potential application in the field of protective clothing.

The Study on the Synthesis of Polyfluoroacrylate

2013 ◽  
Vol 395-396 ◽  
pp. 351-354
Author(s):  
Qin Huan Yang
Keyword(s):  
Contact Angle ◽  
Particle Size ◽  
Polymer Film ◽  
Water Contact Angle ◽  
Film Surface ◽  
Contact Angles ◽  
Fluoride Content ◽  
Water Contact ◽  
Copolymer Films ◽  
High Fluoride

Cationic polyfluoroacrylate has been synthesized in the dual presence of cationic and non-ionic emulsifiers. Optimization studies indicated that the optimal proportions of cationic emulsifier 1631 and non-ionic emulsifiers FSA and AEO-9 were 1.75%, 1.25%, and 0.08%, respectively. Under these conditions, the conversion to the polymer was 92.5%, the particle size was 142 nm, and the water contact angle on a polymer film surface was 94.0°. With increasing dosage of hydrocarbon emulsifier, the water contact angles of copolymer films decreased dramatically. The magnitude of this decrease for a polymer with low fluoride content was greater than that for a polymer with high fluoride content. The fluorinated emulsifier FSA behaved similarly to the hydrocarbon emulsifier.

Long-Term Stable Metal Organic Framework (MOF) Based Mixed Matrix Membranes for Ultrafiltration

2020 ◽  
Author(s):  
Muayad Al-shaeli ◽  
Stefan J. D. Smith ◽  
Shanxue Jiang ◽  
Huanting Wang ◽  
Kaisong Zhang ◽  
...  
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Mixed Matrix Membranes ◽  
Recovery Ratio ◽  
Mixed Matrix ◽  
Water Contact ◽  
Membrane Performance ◽  
Metal Organic ◽  
Matrix Membranes

<p>In this study, novel <a>mixed matrix polyethersulfone (PES) membranes</a> were synthesized by using two different kinds of metal organic frameworks (MOFs), namely UiO-66 and UiO-66-NH<sub>2</sub>. The composite membranes were characterised by SEM, EDX, FTIR, PXRD, water contact angle, porosity, pore size, etc. Membrane performance was investigated by water permeation flux, flux recovery ratio, fouling resistance and anti-fouling performance. The stability test was also conducted for the prepared mixed matrix membranes. A higher reduction in the water contact angle was observed after adding both MOFs to the PES and sulfonated PES membranes compared to pristine PES membranes. An enhancement in membrane performance was observed by embedding the MOF into PES membrane matrix, which may be attributed to the super-hydrophilic porous structure of UiO-66-NH<sub>2</sub> nanoparticles and hydrophilic structure of UiO-66 nanoparticles that could accelerate the exchange rate between solvent and non-solvent during the phase inversion process. By adding the MOFs into PES matrix, the flux recovery ratio was increased greatly (more than 99% for most mixed matrix membranes). The mixed matrix membranes showed higher resistance to protein adsorption compared to pristine PES membranes. After immersing the membranes in water for 3 months, 6 months and 12 months, both MOFs were stable and retained their structure. This study indicates that UiO-66 and UiO-66-NH<sub>2</sub> are great candidates for designing long-term stable mixed matrix membranes with higher anti-fouling performance.</p>

scholarly journals Surface modification of PMMA polymer and its composites with PC61BM fullerene derivative using an atmospheric pressure microwave argon plasma sheet

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andrzej Sikora ◽  
Dariusz Czylkowski ◽  
Bartosz Hrycak ◽  
Magdalena Moczała-Dusanowska ◽  
Marcin Łapiński ◽  
...  
Keyword(s):  
Contact Angle ◽  
Surface Modification ◽  
Chemical Composition ◽  
Water Contact Angle ◽  
Plasma Sheet ◽  
Atmospheric Pressure ◽  
Argon Plasma ◽  
Fullerene Derivative ◽  
Water Contact ◽  
Pmma Polymer

AbstractThis paper presents the results of experimental investigations of the plasma surface modification of a poly(methyl methacrylate) (PMMA) polymer and PMMA composites with a [6,6]-phenyl-C61-butyric acid methyl ester fullerene derivative (PC61BM). An atmospheric pressure microwave (2.45 GHz) argon plasma sheet was used. The experimental parameters were: an argon (Ar) flow rate (up to 20 NL/min), microwave power (up to 530 W), number of plasma scans (up to 3) and, the kind of treated material. In order to assess the plasma effect, the possible changes in the wettability, roughness, chemical composition, and mechanical properties of the plasma-treated samples’ surfaces were evaluated by water contact angle goniometry (WCA), atomic force microscopy (AFM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The best result concerning the water contact angle reduction was from 83° to 29.7° for the PMMA material. The ageing studies of the PMMA plasma-modified surface showed long term (100 h) improved wettability. As a result of plasma treating, changes in the samples surface roughness parameters were observed, however their dependence on the number of plasma scans is irregular. The ATR-FTIR spectra of the PMMA plasma-treated surfaces showed only slight changes in comparison with the spectra of an untreated sample. The more significant differences were demonstrated by XPS measurements indicating the surface chemical composition changes after plasma treatment and revealing the oxygen to carbon ratio increase from 0.1 to 0.4.

scholarly journals Physicochemical Properties and Biocompatibility of Electrospun Polycaprolactone/Gelatin Nanofibers

2021 ◽  
Vol 18 (9) ◽  
pp. 4764
Author(s):  
Wei Lee Lim ◽  
Shiplu Roy Chowdhury ◽  
Min Hwei Ng ◽  
Jia Xian Law
Keyword(s):  
Contact Angle ◽  
Physicochemical Properties ◽  
Water Contact Angle ◽  
Ligament Injury ◽  
Great Promise ◽  
Composition Analysis ◽  
Water Contact ◽  
Tenogenic Differentiation ◽  
Good Biocompatibility ◽  
Tissue Grafts

Tissue-engineered substitutes have shown great promise as a potential replacement for current tissue grafts to treat tendon/ligament injury. Herein, we have fabricated aligned polycaprolactone (PCL) and gelatin (GT) nanofibers and further evaluated their physicochemical properties and biocompatibility. PCL and GT were mixed at a ratio of 100:0, 70:30, 50:50, 30:70, 0:100, and electrospun to generate aligned nanofibers. The PCL/GT nanofibers were assessed to determine the diameter, alignment, water contact angle, degradation, and surface chemical analysis. The effects on cells were evaluated through Wharton’s jelly-derived mesenchymal stem cell (WJ-MSC) viability, alignment and tenogenic differentiation. The PCL/GT nanofibers were aligned and had a mean fiber diameter within 200–800 nm. Increasing the GT concentration reduced the water contact angle of the nanofibers. GT nanofibers alone degraded fastest, observed only within 2 days. Chemical composition analysis confirmed the presence of PCL and GT in the nanofibers. The WJ-MSCs were aligned and remained viable after 7 days with the PCL/GT nanofibers. Additionally, the PCL/GT nanofibers supported tenogenic differentiation of WJ-MSCs. The fabricated PCL/GT nanofibers have a diameter that closely resembles the native tissue’s collagen fibrils and have good biocompatibility. Thus, our study demonstrated the suitability of PCL/GT nanofibers for tendon/ligament tissue engineering applications.

Osteoconductivity of Superhydrophilic Ti- and Zr-Alloy for Biomedical Application

2016 ◽  
Vol 879 ◽  
pp. 2524-2527
Author(s):  
Masazumi Okido ◽  
Kensuke Kuroda
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Strong Influence ◽  
Biomedical Application ◽  
Hydrophobic Surface ◽  
Hydrophilic Surface ◽  
Water Contact ◽  
Zr Alloy ◽  
Zr Alloys

Surface hydrophilicity is considered to have a strong influence on the biological reactions of bone-substituting materials. However, the influence of a hydrophilic or hydrophobic surface on the osteoconductivity is not completely clear. In this study, we produced super-hydrophilic and hydrophobic surface on Ti-and Zr-alloys. Hydrothermal treatment at 180 oC for 180 min. in the distilled water and immersion in x5 PBS(-) brought the super-hydrophilic surface (water contact angle < 10 (deg.)) and heat treatment of as-hydrothermaled the hydrophobic surface. The osteoconductivity of the surface treated samples with several water contact angle was evaluated by in vivo testing. The surface properties, especially water contact angle, strongly affected the osteoconductivity and protein adsorbability, and not the surface substance.

scholarly journals Vertical Orientation of Liquid Crystal on Polystyrene Substituted with n-Alkylbenzoate-p-oxymethyl Pendant Group as a Liquid Crystal Precursor

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2058
Author(s):  
Kyutae Seo ◽  
Hyo Kang
Keyword(s):  
Contact Angle ◽  
Liquid Crystal ◽  
Water Contact Angle ◽  
Polymer Films ◽  
Molar Fraction ◽  
Side Chain ◽  
Pendant Group ◽  
Polymer Modification ◽  
Vertical Orientation ◽  
Water Contact

We synthesized a series of polystyrene derivatives modified with precursors of liquid crystal (LC) molecules via polymer modification reactions. Thereafter, the orientation of the LC molecules on the polymer films, which possess part of the corresponding LC molecular structure, was investigated systematically. The precursors and the corresponding derivatives used in this study include ethyl-p-hydroxybenzoate (homopolymer P2BO and copolymer P2BO#, where # indicates the molar fraction of ethylbenzoate-p-oxymethyl in the side chain (# = 20, 40, 60, and 80)), n-butyl-p-hydroxybenzoate (P4BO), n-hexyl-p-hydroxybenzoate (P6BO), and n-octyl-p-hydroxybenzoate (P8BO). A stable and uniform vertical orientation of LC molecules was observed in LC cells fabricated with P2BO#, with 40 mol% or more ethylbenzoate-p-oxymethyl side groups. In addition, the LC molecules were oriented vertically in LC cells fabricated with homopolymers of P2BO, P4BO, P6BO, and P8BO. The water contact angle on the polymer films can be associated with the vertical orientation of the LC molecules in the LC cells fabricated with the polymer films. For example, vertical LC orientation was observed when the water contact angle of the polymer films was greater than ~86°. Good orientation stability was observed at 150 °C and with 20 J/cm2 of UV irradiation for LC cells fabricated with the P2BO film.

Sign in / Sign up

Export Citation Format

Share Document