scholarly journals Impact of convection on thermographic analysis of silver based thermal joints

2020 ◽  
Vol 32 (4) ◽  
pp. 241-246
Author(s):  
Krzysztof Jakub Stojek ◽  
Jan Felba ◽  
Johann Nicolics ◽  
Dominik Wołczyński
Keyword(s):  
Heat Transfer ◽  
Thermal Analysis ◽  
Energy Loss ◽  
Thermal Resistance ◽  
Analysis Method ◽  
Content Type ◽  
Heat Transfer Efficiency ◽  
Lowered Pressure ◽  
Thermographic Analysis ◽  
The Impact

Purpose This paper aims to develop thermal analysis method of thermal joints characterization. The impact on convection on thermal resistance analysis with use thermography for silver-based thermal joints were investigated for non-metallized and metalized semiconductor surfaces. Heat transfer efficiency depends on thermal conductivity; radiation was used to perform thermographic analysis; the convection is energy loss, so its removing might improve measurements accuracy. Design/methodology/approach Investigation of thermal joints analysis method was focused on determination of convection impact on thermal resistance thermographic analysis method. Measuring samples placed in vacuum chamber with lowered pressure requires transparent window for infrared radiation that is used for thermographic analysis. Impact of infrared window and convection on temperature measurements and thermal resistance were referred. Findings The results showed that the silicon window allowed to perform thermal analysis through, and the convection was heat transfer mode which create 15% energy loss. Originality/value It is possible to measure thermal resistance for silver-based thermal joints with convection eliminated to improve measurements accuracy.

A comprehensive survey on utilization of hybrid nanofluid in plate heat exchanger with various number of plates

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Faraz Afshari ◽  
Azim Doğuş Tuncer ◽  
Adnan Sözen ◽  
Halil Ibrahim Variyenli ◽  
Ataollah Khanlari ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
Flow Behavior ◽  
Plate Heat Exchanger ◽  
Single Type ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Plate Heat ◽  
The Impact

Purpose Using suspended nanoparticles in the base fluid is known as one of the most efficient ways for heat transfer augmentation and improving the thermal efficiency of various heat exchangers. Different types of nanofluids are available and used in different applications. The main purpose of this study is to investigate the effects of using hybrid nanofluid and number of plates on the performance of plate heat exchanger. In this study, TiO2/water single nanofluid and TiO2-Al2O3/water hybrid nanofluid with 1% particle weight ratio have been used to prepare hybrid nanofluid to use in plate type heat exchangers with three various number of plates including 8, 12 and 16. Design/methodology/approach The experiments have been conducted with the aim of examining the impact of plates number and used nanofluids on heat transfer enhancement. The performance tests have been done at 40°C, 45°C, 50°C and 55°C set outlet temperatures and in five various Reynolds numbers between 1,600 and 3,800. Also, numerical simulation has been applied to verify the heat and flow behavior inside the heat exchangers. Findings The results indicated that using both nanofluids raised the thermal performance of all tested exchangers which have a various number of plates. While the major outcomes of this study showed that TiO2-Al2O3/water hybrid nanofluid has priority when compared to TiO2/water single type nanofluid. Utilization of TiO2-Al2O3/water nanofluid led to obtaining an average improvement of 7.5%, 9.6% and 12.3% in heat transfer of heat exchangers with 8, 12 and 16 plates, respectively. Originality/value In the present work, experimental and numerical analyzes have been conducted to investigate the influence of using TiO2-Al2O3/water hybrid nanofluid in various plate heat exchangers. The attained findings showed successful utilization of TiO2-Al2O3/water nanofluid. Based on the obtained results increasing the number of plates in the heat exchanger caused to obtain more increment by using both types of nanofluids.

Evaluation of bend curvature of superheater tube using CFD analysis

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sushovan Chatterjee ◽  
Subhasish Das ◽  
Neelam Kumar Sarma
Keyword(s):  
Heat Transfer ◽  
Computational Study ◽  
Flow Behavior ◽  
Radius Of Curvature ◽  
Pass System ◽  
Maximum Heat ◽  
Curvature Ratio ◽  
Content Type ◽  
Superheater Tube ◽  
The Impact

Purpose The heat transfer within a heat exchanger is highly influenced by geometry of the components especially those with hollow structures like tubes. This paper aims to intend toward the study of efficient and optimized heat transfer in the bends of superheater tubes, with different curvature ratio at constant Reynolds Number. Design/methodology/approach The effect of changing curvature ratio on enthalpy of the fluid passing through the superheater tubes for multi-pass system has been studied with the aid of computational fluid dynamics (CFD) using ANSYS 14.0. Initially a superheater tube with two pass system has been examined with different curvature ratios of 1.425, 1.56, 1.71, 1.85 and 1.99. An industry specified curvature ratio of 1.71 with two pass is investigated, and a comparative assessment has been carried out. This is intended toward obtaining an optimized radius of curvature of the bend for enhancement of heat transfer. Findings The results obtained from software simulation revealed that the curvature ratio of 1.85 provides maximum heat transfer to the fluid flowing through the tube with two pass. This result has been found to be consistent with higher number of passes as well. The effect of secondary flow in bends of curvature has also been illustrated in the present work. Research limitations/implications The study of heat transfer in thermodynamic systems is a never-ending process and has to be continued for the upliftment of power plant performances. This study has been conducted on steady flow behavior of the fluid which may be upgraded by carrying out the same in transient mode. The impact of different curvature ratios on some important parameters such as heat transfer coefficients will certainly upgrade the value of research. Originality/value This computational study provided comprehensive information on fluid flow behavior and its effect on heat transfer in bends of curvature of superheater tubes inside the boiler. It also provides information on optimized bend of curvature for efficient heat transfer process.

Radiative MHD hybrid-nanofluids flow over a permeable stretching surface with heat source/sink embedded in porous medium

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Priyanka Agrawal ◽  
Praveen Kumar Dadheech ◽  
R.N. Jat ◽  
Dumitru Baleanu ◽  
Sunil Dutt Purohit
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Heat Source ◽  
Aluminum Oxide ◽  
Stretching Surface ◽  
Content Type ◽  
Similarity Transformations ◽  
Heat Transfer Efficiency ◽  
Hybrid Nanofluids ◽  
Source Sink

Purpose The purpose of this paper is to study the comparative analysis between three hybrid nanofluids flow past a permeable stretching surface in a porous medium with thermal radiation. Uniform magnetic field is applied together with heat source and sink. Three set of different hybrid nanofluids with water as a base fluid having suspension of Copper-Aluminum Oxide (Cu−Al2O3), Silver-Aluminum Oxide (Ag−Al2O3) and Copper-Silver (Cu−Ag) nanoparticles are considered. The Marangoni boundary condition is applied. Design/methodology/approach The governing model of the flow is solved by Runga–Kutta fourth-order method with shooting technique, using appropriate similarity transformations. Temperature and velocity field are explained by the figures for many flow pertinent parameters. Findings Almost same behavior is observed for all the parameters presented in this analysis for the three set of hybrid nanofluids. For increased mass transfer wall parameter ( fw) and Prandtl Number (Pr), heat transfer rate cuts down for all three sets of hybrid nanofluids, and reverse effect is seen for radiation parameter (R), and heat source/sink parameter ( δ). Practical implications The thermal conductivity of hybrid nanofluids is much larger than the conventional fluids; thus, heat transfer efficiency can be improved with these fluids and its implications can be seen in the fields of biomedical, microelectronics, thin-film stretching, lubrication, refrigeration, etc. Originality/value The current analysis is to optimize heat transfer of three different radiative hybrid nanofluids ( Cu−Al2O3/H2O, Ag−Al2O3/H2O and Cu−Ag/H2O) over stretching surface after applying heat source/sink with Marangoni convection. To the best of the authors’ knowledge, this work is new and never published before.

Dufour and Soret effects on Darcy-Forchheimer flow of second-grade fluid with the variable magnetic field and thermal conductivity

2020 ◽  
Vol 30 (9) ◽  
pp. 4331-4347 ◽  
Author(s):  
Ambreen A. Khan ◽  
S. Naeem ◽  
R. Ellahi ◽  
Sadiq M. Sait ◽  
K. Vafai
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Thermal Conductivity ◽  
Variable Magnetic Field ◽  
Second Grade ◽  
Second Grade Fluid ◽  
Content Type ◽  
Grade Fluid ◽  
The Impact ◽  
Forchheimer Flow

Purpose This study aims to investigate the effect of two-dimensional Darcy-Forchheimer flow over second-grade fluid with linear stretching. Heat transfer through convective boundary conditions is taken into account. Design/methodology/approach Nonlinear coupled governing equations are tackled with a homotopy algorithm, while for numerical computation the computer software package BVPh 2.0 is used. The convergence analysis is also presented for the validation of analytical and numerical results. Findings Valuation for the impact of key parameters such as variable thermal conductivity, Dufour and Soret effects and variable magnetic field in an electrically conducted fluid on the velocity, concentration and temperature profiles are graphically illustrated. It is observed from the results that temperature distribution rises by Dufour number whereas concentration distribution rises by Soret number. The Forchheimer number and porosity parameter raise the skin friction coefficient. The permeable medium has a vital impact and can help in reining the rate of heat transfer. Practical implications The permeable medium has a vital impact and can help in reining the rate of heat transfer. Originality/value To the best of the authors’ knowledge, this study is reported for the first time.

Studying heat transfer on inclined printed circuit boards during vapour phase soldering

2017 ◽  
Vol 29 (1) ◽  
pp. 34-41 ◽  
Author(s):  
Attila Geczy ◽  
Daniel Nagy ◽  
Balazs Illes ◽  
Laszlo Fazekas ◽  
Oliver Krammer ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Printed Circuit Boards ◽  
Printed Circuit Board ◽  
Vapour Phase ◽  
Circuit Board ◽  
Efficient Production ◽  
Content Type ◽  
Printed Circuit ◽  
Heat Transfer Efficiency ◽  
Uneven Heating

Purpose The paper aims to present an investigation of heating during vapour phase soldering (VPS) on inclined printed circuit board (PCB) substrates. The PCB is a horizontal rectangular plate from the aspect of filmwise condensation with a given inclination setting. Design/methodology/approach The paper focuses on the measurement of temperature distribution on the PCBs with a novel setup immersed in the saturated vapour space. The measuring instrumentation is optimized to avoid and minimize vapour perturbing effects. Findings The inhomogeneity of the heating is presented according to the lateral dimensions of the PCB. The inclination improves temperature uniformity, improves heat transfer efficiency; however, a minor misalignment may affect the flow and result in uneven heating. Practical implications The results can be implemented for practical improvements in industrial ovens with the use of intended inclination. The improvements may consequently point to more efficient production and better joint quality. Originality/value The novel method can be used for deeper investigation of inclination during and can be complemented with numerical calculations. The results highlight the importance of precise PCB holding instrumentation in VPS ovens.

Nonhomogeneous model for conjugate mixed convection of nanofluid and entropy generation in an enclosure in presence of inclined magnetic field with Joule heating

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Subhasree Dutta ◽  
Somnath Bhattacharyya ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Joule Heating ◽  
Conjugate Heat Transfer ◽  
Inclined Magnetic Field ◽  
Content Type ◽  
The Impact ◽  
The Magnetic Field

Purpose This study aims to numerically analyse the impact of an inclined magnetic field and Joule heating on the conjugate heat transfer because of the mixed convection of an Al2O3–water nanofluid in a thick wall enclosure. Design/methodology/approach A horizontal temperature gradient together with the shear-driven Flow creates the mixed convection inside the enclosure. The nonhomogeneous model, in which the nanoparticles have a slip velocity because of thermophoresis and Brownian diffusion, is adopted in the present study. The thermal performance is evaluated by determining the entropy generation, which includes the contribution because of magnetic field. A control volume method over a staggered grid arrangement is adopted to compute the governing equations. Findings The Lorentz force created by the applied magnetic field has an adverse effect on the flow and thermal field, and consequently, the heat transfer and entropy generation attenuate because of the presence of magnetic force. The Joule heating enhances the fluid temperature but attenuates the heat transfer. The impact of the magnetic field diminishes as the angle of inclination of the magnetic field is increased, and it manifests as the volume fraction of nanoparticles is increased. Addition of nanoparticles enhances both the heat transfer and entropy generation compared to the clear fluid with enhancement in entropy generation higher than the rate by which the heat transfer augments. The average Bejan number and mixing-cup temperature are evaluated to analyse the thermodynamic characteristics of the nanofluid. Originality/value This literature survey suggests that the impact of an inclined magnetic field and Joule heating on conjugate heat transfer based on a two-phase model has not been addressed before. The impact of the relative slip velocity of nanoparticles diminishes as the magnetic field becomes stronger.

scholarly journals Numerical study of heat transfer in 90° bend tube by AI2O3 nano fluids using fluid injection

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hadi Mahdizadeh ◽  
Nor Mariah Adam
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Reynolds Number ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Volume Fraction ◽  
Fluid Injection ◽  
Content Type ◽  
Nano Fluid ◽  
The Impact

Purpose This paper aims to investigate increasing heat transfer in bend tube 90° by fluid injection using nano fluid flow that was performed by expending varying Reynolds number. This paper studies the increased heat transfer in the bent tube that used some parameters to examine the effects of volume fraction, nanoparticle diameter, fluid injection, Reynolds number on heat transfer and flow in a bend pipe. Design/methodology/approach Designing curved tubes increases the thermal conductivity amount between fluid and wall. It is used the finite volume method and simple algorithms to solve the conservation equations of mass, momentum and energy. The results showed that the nanoparticles used in bent tube transfusion increase the heat transfer performance by increasing the volume fraction; it has a direct impact on enhancing the heat transfer coefficient. Findings Heat transfer coefficient enhanced 1.5% when volume fraction increased from 2 % to 6%, the. It is due to the impact of nanoparticles on the thermal conductivity of the fluid. The fluid is injected into the boundary layer flow due to jamming that enhances heat transfer. Curved lines used create a centrifugal force due to the bending and lack of development that increase the heat transfer. Originality/value This study has investigated the effect of injection of water into a 90° bend before and after the bend. Specific objectives are to analyze effect of injection on heat transfer of bend tube and pressure drop, evaluate best performance of mixing injection and bend in different positions and analyze effect of nano fluid volume fraction on injection.

Underhood Fluid Flow and Thermal Analysis for Passenger Vehicle

2012 ◽  
Vol 165 ◽  
pp. 150-154 ◽  
Author(s):  
Yusoff Lukeman ◽  
Fang Yau Lim ◽  
Shahrir Abdullah ◽  
Zulkifli R. ◽  
A. Shamsudeen ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Analysis ◽  
Fluid Flow ◽  
Hot Spot ◽  
Three Dimensional ◽  
Constant Density ◽  
Passenger Vehicle ◽  
Heat Transfer Efficiency ◽  
Segregated Flow ◽  
Air Intake

The present paper reports a simulation study of the fluid flow and thermal phenomena in the passenger vehicle underhood compartment by analysing velocity magnitude, temperature, radiator heat transfer rate and heat transfer efficiency. Analyses are carried out on a half cut passenger vehicle sample model by using commercial computational fluid dynamics (CFD) software, Star CCM+. Total volume meshes of the model are 24 451 759 cells, and the speed of the car is 0.036, 40, 70, 110, 130 and 213 km/h. Investigation are performed for three dimensional conditions, steady state gas with segregated flow, constant density, turbulence flow, with the use of the Reynolds-Averaged Navier-Stokes model and the K-Epsilon turbulence model. In the thermal analysis, particular attention is given to find hot spot locations under the hood. . High temperature region is observed at the right side of the hood (from the top of view) due primary heat sources from the engine. An air intake at hood is introduced in order to facilitate the airflow to engine room and to remove hot spot to the atmosphere. It is shown that the underhood average temperature decreases by 26.2% and the average airflow velocity at section plane of the centreline increases by 14.5% by adding this air intake.

New thermal-hydraulic correlations for printed circuit heat exchangers (PCHEs) with zigzag channels under high Reynolds numbers

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Carolina P. Naveira-Cotta ◽  
Jian Su ◽  
Paulo Lucena Kreppel Paes ◽  
Philippe R. Egmont ◽  
Rodrigo P. M. Moreira ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Design Parameters ◽  
Channel Diameter ◽  
Content Type ◽  
Printed Circuit ◽  
High Reynolds Numbers ◽  
High Reynolds ◽  
The Impact

Purpose The purpose of this paper is to investigate the impact of semi-circular zigzag-channel printed circuit heat exchanger (PCHE) design parameters on heat transfer and pressure drop of flows under high Reynolds numbers and provide new thermal-hydraulic correlations relevant to conditions encountered in natural gas processing plants. Design/methodology/approach The correlations were developed using three-dimensional steady-state computational fluid dynamics simulations with varying semicircular channel diameter (from 1 to 5 mm), zigzag angle (from 15° to 45°) and Reynolds number (from 40,000 to 100,000). The simulation results were validated by comparison with experimental results and existing correlations. Findings The results revealed that the thermal-hydraulic performance was mostly affected by the zigzag angle, followed by the ratio of the zigzag channel length to the hydraulic diameter. Overall, smaller zigzag angles favored heat transfer intensification while keeping reasonably low pressure drops. Originality/value This study is, to date, the only one providing thermal-hydraulic correlations for PCHEs with zigzag channels under high Reynolds numbers. Besides, the broad range of parameters considered makes the proposed correlations valuable PCHE design tools.

Factors influencing thermal resistance of a down sleeping bag

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yuying An ◽  
Guangbiao Xu ◽  
Hua Shen
Keyword(s):  
Heat Transfer ◽  
Thermal Resistance ◽  
Air Permeability ◽  
Basic Unit ◽  
Filling Rate ◽  
Content Type ◽  
Factors Influencing ◽  
Sleeping Bag ◽  
Cubic Function ◽  
Transfer Mechanisms

PurposeTo have a better understanding of the heat transfer mechanisms in a sleeping bag and to investigate the factors influencing thermal resistance of a down sleeping bag.Design/methodology/approachThe mechanism of heat transfer in a sleeping bag was discussed in this paper. The thermal resistances of 24 samples were investigated. Besides, the relation between fill weight and thermal resistance, and that between the air permeability of fabric and thermal resistance, as well as that between down filling rate and thermal resistance were analyzed.FindingsThe results showed that thermal resistances of samples varied from 0.35 to 0.8 m2 K/W. The fill weight was the most important factor of thermal resistance of sleeping bag and the relation between fill weight and thermal resistance matched well with cubic function. A multiple regression formula was proposed, which with thermal resistance as a dependent variable and with air permeability of fabric, down filling rate, fill weight as independent variables.Originality/valueThermal properties of a sleeping bag were analyzed through simplified basic unit under simplified environment conditions, which was necessary for building the first stage of systematic study of thermal performance of a sleeping bag.

Sign in / Sign up

Export Citation Format

Share Document