Performance evaluation in CNC turning of AA6063-T6 alloy using WASPAS approach

2018 ◽  
Vol 15 (6) ◽  
pp. 700-709 ◽  
Author(s):  
Priyabrata Sahoo ◽  
Mantra Prasad Satpathy ◽  
Vishnu Kumar Singh ◽  
Asish Bandyopadhyay
Keyword(s):  
Surface Roughness ◽  
Goodness Of Fit ◽  
Optimization Technique ◽  
Cutting Parameters ◽  
Confirmatory Test ◽  
Depth Of Cut ◽  
Tool Vibration ◽  
Content Type ◽  
Cnc Turning ◽  
Multi Objective

PurposeSurface roughness and vibration during machining are inevitable which critically affect the product quality characteristics. This paper aims to suggest the implementation of a multi-objective optimization technique to obtain the favorable parametric conditions which lead to minimum tool vibration and surface roughness of 6063-T6 aluminum alloy in computer numerically controlled (CNC) turning.Design/methodology/approachThe case study has been accomplished according to response surface methodology RSM’s Box–Behnken design (BBD) matrix using Titanium Nitride-coated Tungsten Carbide insert in a dry environment. As the experimental results are quite nonlinear, a second-order regression model has been developed for the responses (surface roughness and tool vibration) in terms of input cutting parameters (spindle speed, feed rate and depth of cut). The goodness of fit of the models has also been verified with analysis of variance (ANOVA) results.FindingsThe significance efficacy of input parameters on surface roughness and tool vibrations has been illustrated through multi-objective overlaid 3D surface plots and contour plots. Finally, parametric optimization has been performed to get the desired response values under the umbrella of weighted aggregate sum product assessment (WASPAS) method and verified confidently with confirmatory test results.Originality/valueThe results of this study reveals that hybrid RSM with WASPAS method can be readily applicable to optimize multi-response problems in the manufacturing field with higher confidence.

Investigation of material removal rate and surface roughness using multi-objective optimization for micro-milling of inconel 718

2019 ◽  
Vol 71 (6) ◽  
pp. 787-794 ◽  
Author(s):  
Xiaohong Lu ◽  
FuRui Wang ◽  
Liang Xue ◽  
Yixuan Feng ◽  
Steven Y. Liang
Keyword(s):  
Surface Roughness ◽  
Inconel 718 ◽  
Cutting Parameters ◽  
Spindle Speed ◽  
Micro Milling ◽  
Depth Of Cut ◽  
Multi Objective Optimization ◽  
Content Type ◽  
Cutting Parameter ◽  
Multi Objective

Purpose The purpose of this study is to realize the multi-objective optimization for MRR and surface roughness in micro-milling of Inconel 718. Design/methodology/approach Taguchi method has been applied to conduct experiments, and the cutting parameters are spindle speed, feed per tooth and depth of cut. The first-order models used to predict surface roughness and MRR for micro-milling of Inconel 718 have been developed by regression analysis. Genetic algorithm has been utilized to implement multi-objective optimization between surface roughness and MRR for micro-milling of Inconel 718. Findings This paper implemented the multi-objective optimization between surface roughness and MRR for micro-milling of Inconel 718. And some conclusions can be summarized. Depth of cut is the major cutting parameter influencing surface roughness. Feed per tooth is the major cutting parameter influencing MRR. A number of cutting parameters have been obtained along with the set of pareto optimal solu-tions of MRR and surface roughness in micro-milling of Inconel 718. Originality/value There are a lot of cutting parameters affecting surface roughness and MRR in micro-milling, such as tool diameter, depth of cut, feed per tooth, spindle speed and workpiece material, etc. However, to the best our knowledge, there are no published literatures about the multi-objective optimization of surface roughness and MRR in micro-milling of Inconel 718.

OPTIMAL PREDICTION AND DESIGN OF SURFACE ROUGHNESS FOR CNC TURNING OF AL7075-T6 BY USING THE TAGUCHI HYBRID QPSO ALGORITHM

2016 ◽  
Vol 40 (5) ◽  
pp. 883-895 ◽  
Author(s):  
Wen-Jong Chen ◽  
Chuan-Kuei Huang ◽  
Qi-Zheng Yang ◽  
Yin-Liang Yang
Keyword(s):  
Surface Roughness ◽  
Particle Swarm Optimization ◽  
Predictive Models ◽  
Particle Swarm ◽  
Optimal Solution ◽  
Cutting Parameters ◽  
Optimization Methods ◽  
Swarm Optimization ◽  
Cnc Turning ◽  
Multi Objective

This paper combines the Taguchi-based response surface methodology (RSM) with a multi-objective hybrid quantum-behaved particle swarm optimization (MOHQPSO) to predict the optimal surface roughness of Al7075-T6 workpiece through a CNC turning machining. First, the Taguchi orthogonal array L27 (36) was applied to determine the crucial cutting parameters: feed rate, tool relief angle, and cutting depth. Subsequently, the RSM was used to construct the predictive models of surface roughness (Ra, Rmax, and Rz). Finally, the MOHQPSO with mutation was used to determine the optimal roughness and cutting conditions. The results show that, compared with the non-optimization, Taguchi and classical multi-objective particle swarm optimization methods (MOPSO), the roughness Ra using MOHQPSO along the Pareto optimal solution are improved by 68.24, 59.31 and 33.80%, respectively. This reveals that the predictive models established can improve the machining quality in CNC turning of Al7075-T6.

Surface Roughness Optimization of some Machining Parameters in Turning Operations Using Taguchi Method

2009 ◽  
Vol 62-64 ◽  
pp. 613-620 ◽  
Author(s):  
Ishaya Musa Dagwa
Keyword(s):  
Surface Roughness ◽  
Feed Rate ◽  
Signal To Noise Ratio ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Confirmatory Test ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Turning Operations ◽  
Factors Affecting

In this study, an attempt has been made to optimize cutting parameters (cutting speed, depth of cut, and feed rate) in conventional turning operations. A Taguchi orthogonal array (L933) was used in surface roughness optimization of a solid round bar of mild steel material. The experimental runs were randomized; two skilled machinists were involved in the turning operation using the same machining parameters. ANOVA analysis was performed to identify the percentage contribution of the factors affecting surface roughness during machining. The optimal cutting combination was determined by using the signal-to-noise ratio and the following results were obtained; speed (level 2) = 55.m/min, depth of cut (level 3) = 0.08mm, and feed rate (levels 3) = at 0.08mm/rev. A prediction of surface roughness was carried out using the optimal setting followed by a confirmatory test on the lathe. The result shows that the confirmatory runs compared favourably (96.44%) with the predicted surface roughness.

scholarly journals Experimental Investigation into Influence of Lathe Cutting Parameters on Surface Roughness for Ferrous and Non- Ferrous Alloys

2017 ◽  
Vol 3 (4) ◽  
pp. 11
Author(s):  
Asim M Saddique ◽  
Murali R V ◽  
Salim R.K
Keyword(s):  
Surface Roughness ◽  
Experimental Investigation ◽  
Stainless Steel ◽  
Feed Rate ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Cnc Turning ◽  
Stainless Steel 304 ◽  
Turning Center

Optimization of lathe cutting parameters is very important as they form the best suitable conditions for the machining operations. For the efficient use of a CNC Lathe, a set of optimum cutting parameters (speed, feed and depth of cut) is an essential requirement. Surface Roughness, which heavily depends on these cutting parameters, is one of the most frequently used standards to define the quality of turned components. In this work, a correlative study of cutting parameters and the surface roughness for ferrous (stainless steel 304) and non–ferrous alloy (aluminum) material is carried out and presented. Response Surface Methodology (RSM) and Analysis of Variance (ANOVA) techniques are employed to investigate the influence of cutting parameters on surface roughness values. Results from contour plots are obtained to investigate the patterns of factors and the responses. The combination of optimum experimental parameters can be found by machining these ferrous and non-ferrous materials in CNC turning center and finding the least surface roughness parameters. ANOVA analysis, integrated with Design Expert© software, is used to determine effective ratios of the parameters and subsequently the relationships between input parameters and their responses relationship are established. The minimum surface roughness results in reference to spindle rpm, feed rate, and depth of cut are determined and estimation of the optimal surface roughness values (Ra) for least surface roughness are the results obtained in the study. This study presents the findings of an experimental investigation into the effect of turning parameters like cutting speed. Feed rate and depth of cut by turning ferrous (stainless steel 304) and non-ferrous material (Aluminium) in the CNC turning center and then checked the surface roughness values with Mitutoyo SJ-301 instrument. The effects of parameters and their correlation with the surface roughness and the optimal values have been analysed. These results establish a firm relationship and correlation between cutting parameters and surface roughness and in doing so, results also achieve an optimal set of machining parameters for select ferrous and non-ferrous materials.

Multi objective optimization of ECG process under fuzzy environment

2015 ◽  
Vol 11 (3) ◽  
pp. 350-371 ◽  
Author(s):  
G K Bose
Keyword(s):  
Process Parameters ◽  
Supply Voltage ◽  
Optimization Technique ◽  
Research Work ◽  
Experimental Studies ◽  
Depth Of Cut ◽  
Multi Objective Optimization ◽  
Content Type ◽  
Multi Objective ◽  
Machining Parameter

Purpose – In the present research work electrochemical grinding (ECG) process is applied to machine Al2O3/Al interpenetrating phase composite. The purpose of this paper is to present a new approach to optimize the ECG process parameters while machining alumina-aluminum (Al2O3 – Al) interpenetrating phase composites (IPC) used in automotive, aircraft and manufacture of space ships applying Taguchi-based experimental studies and fuzzy multi-criteria decision-making techniques. Design/methodology/approach – The present work identifies the process variables that have significant consequences during ECG of Al2O3/Al IPC. The Taguchi L9 orthogonal array is selected for design of experiments and the analysis is carried out following signal to noise ratio. The analysis of variance is carried out to establish the factors that significantly influence the responses. The present work also investigates the multi objective optimization of ECG process parameters using VIseKriterijumsa Optimizacija I Kompromisno Resenje (VIKOR) and Grey relational analysis (GRA) to establish the reference ranking from a set of alternatives in the presence of conflicting criteria. Findings – Material removal rate, surface finish, overcut and cutting force are shown to depend on the type of electrolyte, supply voltage, depth of cut and electrolyte flow rate. It is found that voltage and electrolyte concentration are important. The optimal machining parameter combination for ECG process is determined using fuzzy set theory, VIKOR and GRA. Substantial improvement in machining performance takes place. Practical implications – A variety of manufacturing techniques are available for processing of Al2O3 – Al metal matrix composites. Generally manufacturers favor low cost modus operandi. Therefore ECG process is the best alternative for processing of MMCs in the present commercial sectors. The experimental investigation approach can act as useful and an efficient guideline for manufacturing. Originality/value – The characteristic features of the ECG process are reflected through Taguchi design-based experimental studies with various process parametric combinations. Application of multi-response optimization technique for evaluation of best parametric combination for machining Al2O3 – Al IPC material using ECG process is a first-of-its-kind approach in literature.

Studying The Effect of a New Mixed Cutting Fluid on Surface Roughness

2020 ◽  
Vol 38 (11A) ◽  
pp. 1593-1601
Author(s):  
Mohammed H. Shaker ◽  
Salah K. Jawad ◽  
Maan A. Tawfiq
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Cutting Parameters ◽  
Machining Process ◽  
Cutting Fluid ◽  
Depth Of Cut ◽  
Cutting Fluids ◽  
Machining Processes ◽  
Dry Cutting ◽  
Cutting Speeds

This research studied the influence of cutting fluids and cutting parameters on the surface roughness for stainless steel worked by turning machine in dry and wet cutting cases. The work was done with different cutting speeds, and feed rates with a fixed depth of cutting. During the machining process, heat was generated and effects of higher surface roughness of work material. In this study, the effects of some cutting fluids, and dry cutting on surface roughness have been examined in turning of AISI316 stainless steel material. Sodium Lauryl Ether Sulfate (SLES) instead of other soluble oils has been used and compared to dry machining processes. Experiments have been performed at four cutting speeds (60, 95, 155, 240) m/min, feed rates (0.065, 0.08, 0.096, 0.114) mm/rev. and constant depth of cut (0.5) mm. The amount of decrease in Ra after the used suggested mixture arrived at (0.21µm), while Ra exceeded (1µm) in case of soluble oils This means the suggested mixture gave the best results of lubricating properties than other cases.

Prediction of Surface Roughness and Optimization of Cutting Parameters in CNC Turning of Rotational Features

2020 ◽  
Vol 38 (8A) ◽  
pp. 1143-1153
Author(s):  
Yousif K. Shounia ◽  
Tahseen F. Abbas ◽  
Raed R. Shwaish
Keyword(s):  
Surface Roughness ◽  
Linear Regression ◽  
Regression Model ◽  
Linear Regression Model ◽  
Feed Rate ◽  
Cutting Parameters ◽  
Spindle Speed ◽  
Depth Of Cut ◽  
Non Linear ◽  
Optimization Of Cutting Parameters

This research presents a model for prediction surface roughness in terms of process parameters in turning aluminum alloy 1200. The geometry to be machined has four rotational features: straight, taper, convex and concave, while a design of experiments was created through the Taguchi L25 orthogonal array experiments in minitab17 three factors with five Levels depth of cut (0.04, 0.06, 0.08, 0.10 and 0.12) mm, spindle speed (1200, 1400, 1600, 1800 and 2000) r.p.m and feed rate (60, 70, 80, 90 and 100) mm/min. A multiple non-linear regression model has been used which is a set of statistical extrapolation processes to estimate the relationships input variables and output which the surface roughness which prediction outside the range of the data. According to the non-linear regression model, the optimum surface roughness can be obtained at 1800 rpm of spindle speed, feed-rate of 80 mm/min and depth of cut 0.04 mm then the best surface roughness comes out to be 0.04 μm at tapper feature at depth of cut 0.01 mm and same spindle speed and feed rate pervious which gives the error of 3.23% at evolution equation.

Effects of Insert Nose Radius and Processing Cutting Parameter on the Surface Roughness of Aisi 316 Stainless Steel

2010 ◽  
Vol 447-448 ◽  
pp. 51-54
Author(s):  
Mohd Fazuri Abdullah ◽  
Muhammad Ilman Hakimi Chua Abdullah ◽  
Abu Bakar Sulong ◽  
Jaharah A. Ghani
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Surface Finish ◽  
Feed Rate ◽  
Cutting Speed ◽  
Chip Thickness ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Nose Radius ◽  
Aisi 316

The effects of different cutting parameters, insert nose radius, cutting speed and feed rates on the surface quality of the stainless steel to be use in medical application. Stainless steel AISI 316 had been machined with three different nose radiuses (0.4 mm 0.8 mm, and 1.2mm), three different cutting speeds (100, 130, 170 m/min) and feed rates (0.1, 0.125, 0.16 mm/rev) while depth of cut keep constant at (0.4 mm). It is seen that the insert nose radius, feed rates, and cutting speed have different effect on the surface roughness. The minimum average surface roughness (0.225µm) has been measured using the nose radius insert (1.2 mm) at lowest feed rate (0.1 mm/rev). The highest surface roughness (1.838µm) has been measured with nose radius insert (0.4 mm) at highest feed rate (0.16 mm/rev). The analysis of ANOVA showed the cutting speed is not dominant in processing for the fine surface finish compared with feed rate and nose radius. Conclusion, surface roughness is decreasing with decreasing of the feed rate. High nose radius produce better surface finish than small nose radius because of the maximum uncut chip thickness decreases with increase of nose radius.

OPTIMISING CUTTING PARAMETERS FOR HOT TURNING ON EN31 MATERIAL

2021 ◽  
Vol 5 (10) ◽  
Author(s):  
Prof. Hemant k. Baitule ◽  
Satish Rahangdale ◽  
Vaibhav Kamane ◽  
Saurabh Yende
Keyword(s):  
Surface Roughness ◽  
Surface Finish ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Machining Process ◽  
Depth Of Cut ◽  
Multiple Time ◽  
Turning Process ◽  
Workpiece Material ◽  
Hot Turning

In any type of machining process the surface roughness plays an important role. In these the product is judge on the basis of their (surface roughness) surface finish. In machining process there are four main cutting parameter i.e. cutting speed, feed rate, depth of cut, spindle speed. For obtaining good surface finish, we can use the hot turning process. In hot turning process we heat the workpiece material and perform turning process multiple time and obtain the reading. The taguchi method is design to perform an experiment and L18 experiment were performed. The result is analyzed by using the analysis of variance (ANOVA) method. The result Obtain by this method may be useful for many other researchers.

Evaluation of Process Parameters in Machining of AA6063 Alloy

2018 ◽  
Vol 1148 ◽  
pp. 109-114
Author(s):  
M. Balaji ◽  
C.H. Nagaraju ◽  
V.U.S. Vara Prasad ◽  
R. Kalyani ◽  
B. Avinash
Keyword(s):  
Surface Roughness ◽  
Regression Analysis ◽  
Process Parameters ◽  
Single Channel ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Roughness Parameters ◽  
Surface Roughness Parameters ◽  
Aa6063 Alloy

The main aim of this work is to analyse the significance of cutting parameters on surface roughness and spindle vibrations while machining the AA6063 alloy. The turning experiments were carried out on a CNC lathe with a constant spindle speed of 1000rpm using carbide tool inserts coated with Tic. The cutting speed, feed rate and depth of cut are chosen as process parameters whose values are varied in between 73.51m/min to 94.24m/min, 0.02 to 0.04 mm/rev and 0.25 to 0.45 mm respectively. For each experiment, the surface roughness parameters and the amplitude plots have been noted for analysis. The output data include surface roughness parameters (Ra,Rq,Rz) measured using Talysurf and vibration parameter as vibration amplitude (mm/sec) at the front end of the spindle in transverse direction using single channel spectrum analyzer (FFT).With the collected data Regression analysis is also performed for finding the optimum parameters. The results show that significant variation of surface irregularities and vibration amplitudes were observed with cutting speed and feed. The optimum cutting speed and feed from the regression analysis were 77.0697m/min and 0.0253mm/rev. for the minimum output parameters. No significant effect of depth of cut on output parameters is identified.

Sign in / Sign up

Export Citation Format

Share Document